A Resonant Integrator Based PLL and AC Current Controller for Single Phase Grid Connected PWM-VSI

Grid connected PWM-VSIs are being increasingly used for applications such as Distributed Generation (DG), power quality, UPS etc. Appropriate control strategies for grid synchronisation and line current regulation are required to establish such a grid interconnection and power transfer. Control of three phase VSIs is widely reported in iterature. Conventionally, dq control in Synchronous Reference Frame(SRF) is employed for both PLL and line current control where PI-controllers are used to track the DC references. Single phase systems do not have defined direct (d) and quadrature (q) axis components that are required for SRF transformation. Thus, references are AC in nature and hence usage of PI controllers cannot yield zero steady state errors. Resonant controllers have the ability to track AC references accurately. In this work, a resonant controller based single phase PLL and current control technique are being employed for tracking grid frequency and the AC current reference respectively. A single phase full bridge converter is being operated as a STATCOM for performance evaluation of the control scheme.

Influence of strain softening on the fracture of plain concrete beams

Fracture behaviour of notched and un-notched plain concrete slender beams subjected to three-point or four-point bending is analyzed through a one-dimensional model, also called Softening Beam Model. Fundamental equations of equilibrium are used to develop the model. The influence of structural size in altering the fracture mode from brittle fracture to plastic collapse is explained through the stress distribution across the uncracked ligament obtained by varying the strain softening modulus. It is found that at the onset of fracture instability, stress at the crack tip is equal to zero. The maximum load and fracture load are found to be different and a unique value for the fracture load is obtained. It is shown that the length of the fracture process zone depends on the value of the strain softening modulus. Theoretical limits for fracture process zone length are also calculated. Several nonlinear fracture parameters, such as, crack tip opening displacement, crack mouth opening displacement and fracture energy are computed for a wide variety of beam specimens reported in the literature and are found to compare very well with experimental and theoretical results. It is demonstrated that by following a simple procedure, both pre-peak and post-peak portions of load versus crack mouth opening displacement curve can be obtained quite accurately. Further, a simple procedure to calculate the maximum load is also developed. The predicted values of maximum load are found to agree well with the experimental values. The Softening Beam Model (SBM), proposed in this investigation is very simple and is based on rational considerations. It can completely describe the fracture process from the beginning of formation of the fracture process zone till the onset of fracture instability.A l'aide d'un modèle unidimensionnel dit ldquoSoftening Beam Modelrdquo (SBM), on analyse le comportement à rupture de poutres élancées pleines entaillées ou non, soumises en flexion en trois ou quatre points. Des équations fondamentales d'équilibre sont utilisées pour développer le modèle. On explique l'influence de la taille du composant sur l'altération du mode de rupture en rupture fragile et en effondrement plastique par la distribution par la distribution des contraintes sur le ligament non fissuré lorsque varie le module d'adoucissement. On trouve que la contrainte à l'extrémité de la fissure est nulle est nulle au début de l'instabilité de la rupture. La charge maximum et la charge à la rupture sont trouvées différentes, et on obtient une valeur unique de la charge à la rupture. On montre que la longueur de la zone concernée par le processus de rupture d'pend de la valeur du module d'adoucissement. On calcule également les limites théoriques de longueur de cette zone. Divers paramètres de rupture non linéaire sont calculés pour une large gamme d'éprouvettes en poutres reprises dans la littérature; on trouve qu'il existe une bonne concordance avec les résultats expérimentaux et théoriques. On démontre qu'en suivant une procédure simple on peut obtenir avec une bonne précision la courbe reliant les portions avant et après le pic de sollicitation en fonction du COD de la fissure. En outre, on développe une procédure simple pour calculer la charge maximum. Les valeurs prédites sont en bon accord avec les valeurs expérimentales. Le modèle SBM proposé est très simple et est basé sur des considérations rationnelles. Il est susceptible de décrire complètement le processus de rupture depuis le début de la formation de la zone intéressée jusqu'à l'amorçage de la rupture instable.

Composite instantaneous comparators basis for design and their transient performance

Principles of design of composite instantaneous comparators (a combination of amplitude- and phase- comparison techniques) are laid out to provide directional, directional-reactance, nonoffset-resistance and conductance characteristices. The respective signals provided by the voltage transformer and the current transformer are directly used as relaying signals without resorting to any form of mixing. Phase shifts required, are obtained by using magnetic ferrite cores in a novel manner. Sampling units employing a combination of ferrite cores and semiconductor devices provide highly reliable designs. Special attention is paid to the choice of relaying signals, to eliminate the need for any synchronisation or modification and to avoid `image¿ characteristics. These factors have resulted in a considerable simplification of the practical circuitry. A thyristor AND circuit is employed in dual comparator units to provide the final tripping, and leads to a circuit which is much less sensitive to extraneous signals than a single-thyristor unit.

Integrated higher-order pulse-width modulation filter-transformer structure for single-phase static compensator

A power filter is necessary to connect the output of a power converter to the grid so as to reduce the harmonic distortion introduced in the line current and voltage by the power converter. Many a times, a transformer is also present before the point of common coupling. Magnetic components often constitute a significant part of the overall weight, size and cost of the grid interface scheme. So, a compact inexpensive design is desirable. A higher-order LCL-filter and a transformer are increasingly being considered for grid interconnection of the power converter. This study proposes a design method based on a three-winding transformer, that generates an integrated structure that behaves as an LCL-filter, with both the filter inductances and the transformer that are merged into a single electromagnetic component. The parameters of the transformer are derived analytically. It is shown that along with a filter capacitor, the transformer parameters provide the filtering action of an LCL-filter. A single-phase full-bridge power converter is operated as a static compensator for performance evaluation of the integrated filter transformer. A resonant integrator-based single-phase phase locked loop and stationary frame AC current controller are employed for grid frequency synchronisation and line current control, respectively.

Synconset Waves and Chains: Spiking Onsets in Synchronous Populations Predict and Are Predicted by Network Structure

Synfire waves are propagating spike packets in synfire chains, which are feedforward chains embedded in random networks. Although synfire waves have proved to be effective quantification for network activity with clear relations to network structure, their utilities are largely limited to feedforward networks with low background activity. To overcome these shortcomings, we describe a novel generalisation of synfire waves, and define `synconset wave' as a cascade of first spikes within a synchronisation event. Synconset waves would occur in `synconset chains', which are feedforward chains embedded in possibly heavily recurrent networks with heavy background activity. We probed the utility of synconset waves using simulation of single compartment neuron network models with biophysically realistic conductances, and demonstrated that the spread of synconset waves directly follows from the network connectivity matrix and is modulated by top-down inputs and the resultant oscillations. Such synconset profiles lend intuitive insights into network organisation in terms of connection probabilities between various network regions rather than an adjacency matrix. To test this intuition, we develop a Bayesian likelihood function that quantifies the probability that an observed synfire wave was caused by a given network. Further, we demonstrate it's utility in the inverse problem of identifying the network that caused a given synfire wave. This method was effective even in highly subsampled networks where only a small subset of neurons were accessible, thus showing it's utility in experimental estimation of connectomes in real neuronal-networks. Together, we propose synconset chains/waves as an effective framework for understanding the impact of network structure on function, and as a step towards developing physiology-driven network identification methods. Finally, as synconset chains extend the utilities of synfire chains to arbitrary networks, we suggest utilities of our framework to several aspects of network physiology including cell assemblies, population codes, and oscillatory synchrony.

O lúdico no trabalho: o ponto de vista da atividade como operador de análise do lúdico no trabalho dos menores em um programa adolescente trabalhador

A presente tese de doutorado propõe-se a investigar o lúdico como um ingrediente das situações de trabalho. Tem-se como referência teórica os materiais oriundos da Ergologia e das abordagens clinicas sobre trabalho: Psicodinâmica do Trabalho e Clinica da Atividade. Os autores pesquisados concordam que independentemente de época histórica, cultura e classe social, jogar e brincar fazem parte da vida da criança, onde real e imaginário se confundem. O jogo constitui uma função tão fundamental para a humanidade quanto a razão e a fabricação de objetos. A cultura possui um caráter essencialmente lúdico; é no jogo e pelo jogo que a civilização surge e se desenvolve. O brincar é uma atividade humana universal, própria da saúde, fundamento de todo o viver criativo, assim como da arte e da cultura. O próprio homem medieval é muito sensível ao lúdico e convive a cada instante com o riso e com a brincadeira. O foco desta pesquisa foi uma aproximação à realidade do trabalho de alguns integrantes de um Programa Adolescente Trabalhador, com idade entre 14 e 18 anos. O campo empírico foi a Gerência Regional de Logística do Banco do Brasil, situada no bairro do Andaraí, no município do Rio de Janeiro. Sete adolescentes participaram da Comunidade Ampliada de Pesquisa. O trabalho de campo foi norteado pela preocupação em evitar a supremacia do saber científico em relação a saberes advindos da prática. Este trabalho de pesquisa não se propôs a pesquisar a realidade de trabalho dos menores, mas investigar os movimentos discursivos produzidos nos Encontros desta Comunidade de Pesquisa. Conforme a abordagem da Clínica da Atividade chama-se à atenção para vários impedimentos da emergência da dimensão lúdica em função dos constrangimentos da organização do trabalho. Por fim, questiona-se que modos de gestão olham para a realidade e o real do trabalho e da atividade, aceitando o lúdico como foco analítico, incorporando essa reserva de alternativa, investigando toda uma riqueza aí potencialmente presente e desconhecida.

Coletivo de trabalho e atividade dos motoboys: gênero profissional, saberes operatórios e riscos da atividade de trabalho

Há cerca de 20 anos, inicia-se no Brasil uma atividade de trabalho nas áreas urbanas: o serviço de motoboys, que vem se tornando comum na distribuição de produtos aos clientes. Em paralelo ao crescimento dessa atividade ocupacional, a quantidade de motociclistas que se acidentam grave ou fatalmente nas vias brasileiras está em pleno crescimento, razão pela qual os motoboys vêm chamando atenção das autoridades de Saúde Pública. Tentando compreender as questões que estão na base e em torno desse fenômeno, inicia-se no país um pequeno, mas consistente, conjunto de produções acadêmicas sobre a profissão. Porém, ainda são poucos os estudos que procuram compreender a atividade de trabalho dos motoboys. Menos ainda, são os que investigam dimensões do coletivo produzidas pelos profissionais (tais como o coletivo de trabalho ou o gênero profissional), bem como seus efeitos na constituição de saberes, discursos, valores e estratégias de enfrentamentos aos diversos contraintes da atividade, em particular as dimensões do risco de acidentes de trabalho. Visando responder especificamente a essa questão, é que se propõe esse trabalho. Para tanto, desenvolveu-se uma pesquisa exploratória em duas perspectivas metodológicas: por um lado um levantamento quantitativo sobre diversos aspectos do trabalho dos motoboys, tais como o perfil do trabalhador, a organização do trabalho e alguns efeitos no trabalhador; essa etapa se deu por meio da aplicação de 189 questionários aplicados em uma amostra proporcional à população identificada de trabalhadores nos principais corredores viários do município de Vitória. Por outro lado, se empreendeu um estudo, baseado nos princípios da Ergologia e em diferentes abordagens clínicas do trabalho, especialmente a Clínica da Atividade e a Psicodinâmica do Trabalho, por meio do qual se pretendeu realizar uma análise da atividade de trabalho em parceria com os trabalhadores, procurando identificar as dimensões do coletivo que são produzidas por meio do trabalho, bem como os saberes e estratégias individuais e coletivas para lidar com as exigências, as pressões, as contradições e as eventualidades do cotidiano. Destaca-se, nessa etapa qualitativa, a realização de uma aproximação etnográfica dos trabalhadores e a utilização das técnicas da autoconfrontação e das instruções ao sósia, essas duas obtidas via Clínica da Atividade. Como resultado, observou-se a existência de inúmeros saberes produzidos e/ou partilhados pelo coletivo, tais como a avaliação dos serviços, a gestão do tempo, o planejamento da rota, a mobilização da rede solidária, a gestão das transgressões, os modos de conduzir, bem como as estratégias coletivas para lidar com o risco, dentre os quais se destacam a exploração positiva do risco e as estratégias baseadas na potência da virilidade, a capacidade de antecipação, ou o cuidado na proteção de si por meio da sinalização da presença do trabalhador em trânsito nas vias. Conclui-se, dessa análise, a existência de um coletivo de trabalho e, mais particularmente, de um gênero profissional em franca constituição. Este, em contrapartida, está eivado de inúmeras contradições e embates que, potencialmente, podem estar atuando para o impedimento da manifestação desse coletivo de trabalho em toda a sua potência

Mobilização do corpo-si na gestão da atividade de motoristas de ambulâncias

Esta tese busca explorar as possibilidades contidas do corpo na gestão da atividade de trabalho de motoristas de ambulâncias. Trata-se de uma concepção de corpo, não oponente a alma, que se notabiliza pelo pensamento, pela inteligência, pelo sistema nervoso, pela história: um corpo-si. O diálogo mantido com a perspectiva ergológica, aqui convocada, opera-se a partir da concepção de vida, saúde-doença em George Canguilhem, da contribuição ergonômica, dos referenciais da linguagem e trabalho e da etnografia. Para configuração do campo empírico, adotaram-se métodos e técnicas apropriados de pesquisa em situação concreta de trabalho, denominadas visitas, instrumentalizadas com técnicas de entrevistas dialógicas e observações da atividade, além de uma pesquisa bibliográfica e análise global do trabalho. A pesquisa contou com a participação de motoristas de UTI móvel de uma empresa de transportes de ambulâncias da cidade do Rio de Janeiro. A análise das situações de trabalho foi inspirada na ergonomia da atividade e nas contribuições da perspectiva dialógica. Dentre os resultados obtidos destacamos: problemas de comunicação na relação de trabalho entre motoristas e a Central de Atendimento (Call Center), estado de má conservação e de desconforto das ambulâncias, riscos de doenças no contato com o usuário, insuficiência salarial e atraso no pagamento, indeterminação de pausas durante a jornada, contraintes temporais decorrentes da pilotagem em casos de urgência e emergência, ameaças de multas por excesso de velocidade, além de obstáculos emanados do trânsito: engarrafamentos, barulhos, semáforos, etc. Enfim, um conjunto de variabilidades e infidelidades do meio de trabalho, que permite aos motoristas produzirem novos usos de si, porque mobilizam a integralidade do corpo para chegar a modos operatórios que deem conta dessas situações de trabalho, considerando, sobretudo, a gestão da dinâmica entre as exigências de produtividade e qualidade com saúde, segurança e fiabilidade.

Real-time optical OFDM transceivers for PON applications

Recent real-time optical OFDM (OOFDM) research progress is reviewed extensively in terms of adaptive transceiver design, intensity modulators, synchronisation techniques and network architectures. Results indicate that OOFDM is feasible for mass deployment in PONs. © 2011 Optical Society of America.

Growth setbacks in new firms

New firms in emerging industries are subject to complex dynamic processes which defy the attempts at prediction embodied in business conjectures. Discontinuous growth is common, but the issue of interruptions in the early growth of new firms has not been adequately addressed in the mainstream literature. We examine the prevalence of interruptions to growth in a cohort study of the growth trajectories of firms founded in 1990, then look to cases studies of individual firms to investigate underlying causes. We find that substantial growth is rare and continuous growth unusual, and that growth interruptions are the result of both internal and external dynamics. The managers of growing firms face shortages of vital resources and significant problems of resource synchronisation and coordination, many of which can lead to what are, in effect, changes of phase state. Meanwhile, the volatile environment of an emerging industry presents particular problems to young firms which have not yet built up reserves to sustain them through short-term crises. However, problem solving by those that survive provides an important source of learning which can underpin their future development. © 2004 Elsevier Ltd. All rights reserved.

Ansiedade e percepções/atitudes dos profissionais da educação face à avaliação de desempenho

Dissertação de Mestrado apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Psicologia, especialização em Psicologia da Educação e Intervenção Comunitária.

Revoluções no fotojornalismo

Tese apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Doutor em Ciências da Informação, especialidade em Jornalismo

Properties and applications of injection locking in 1.55 μm quantum-dash mode-locked semiconductor lasers

Mode-locked semiconductor lasers are compact pulsed sources with ultra-narrow pulse widths and high repetition-rates. In order to use these sources in real applications, their performance needs to be optimised in several aspects, usually by external control. We experimentally investigate the behaviour of recently-developed quantum-dash mode-locked lasers (QDMLLs) emitting at 1.55 μm under external optical injection. Single-section and two-section lasers with different repetition frequencies and active-region structures are studied. Particularly, we are interested in a regime which the laser remains mode-locked and the individual modes are simultaneously phase-locked to the external laser. Injection-locked self-mode-locked lasers demonstrate tunable microwave generation at first or second harmonic of the free-running repetition frequency with sub-MHz RF linewidth. For two-section mode-locked lasers, using dual-mode optical injection (injection of two coherent CW lines), narrowing the RF linewidth close to that of the electrical source, narrowing the optical linewidths and reduction in the time-bandwidth product is achieved. Under optimised bias conditions of the slave laser, a repetition frequency tuning ratio >2% is achieved, a record for a monolithic semiconductor mode-locked laser. In addition, we demonstrate a novel all-optical stabilisation technique for mode-locked semiconductor lasers by combination of CW optical injection and optical feedback to simultaneously improve the time-bandwidth product and timing-jitter of the laser. This scheme does not need an RF source and no optical to electrical conversion is required and thus is ideal for photonic integration. Finally, an application of injection-locked mode-locked lasers is introduced in a multichannel phase-sensitive amplifier (PSA). We show that with dual-mode injection-locking, simultaneous phase-synchronisation of two channels to local pump sources is realised through one injection-locking stage. An experimental proof of concept is demonstrated for two 10 Gbps phase-encoded (DPSK) channels showing more than 7 dB phase-sensitive gain and less than 1 dB penalty of the receiver sensitivity.

Mobile cloud application models facilitated by the CPA

This paper describes implementations of two mobile cloud applications, file synchronisation and intensive data processing, using the Context Aware Mobile Cloud Services middleware, and the Cloud Personal Assistant. Both are part of the same mobile cloud project, actively developed and currently at the second version. We describe recent changes to the middleware, along with our experimental results of the two application models. We discuss challenges faced during the development of the middleware and their implications. The paper includes performance analysis of the CPA support for the two applications in respect to existing solutions.

Exploring alternatives for milk quality improvement and more efficient dairy production in a smallholder farming context – case study: Mantaro Valley (Peru)

Consumer demand is revolutionizing the way products are being produced, distributed and marketed. In relation to the dairy sector in developing countries, aspects of milk quality are receiving more attention from both society and the government. However, milk quality management needs to be better addressed in dairy production systems to guarantee the access of stakeholders, mainly small-holders, into dairy markets. The present study is focused on an analysis of the interaction of the upstream part of the dairy supply chain (farmers and dairies) in the Mantaro Valley (Peruvian central Andes), in order to understand possible constraints both stakeholders face implementing milk quality controls and practices; and evaluate “ex-ante” how different strategies suggested to improve milk quality could affect farmers and processors’ profits. The analysis is based on three complementary field studies conducted between 2012 and 2013. Our work has shown that the presence of a dual supply chain combining both formal and informal markets has a direct impact on dairy production at the technical and organizational levels, affecting small formal dairy processors’ possibilities to implement contracts, including agreements on milk quality standards. The analysis of milk quality management from farms to dairy plants highlighted the poor hygiene in the study area, even when average values of milk composition were usually high. Some husbandry practices evaluated at farm level demonstrated cost effectiveness and a big impact on hygienic quality; however, regular application of these practices was limited, since small-scale farmers do not receive a bonus for producing hygienic milk. On the basis of these two results, we co-designed with formal small-scale dairy processors a simulation tool to show prospective scenarios, in which they could select their best product portfolio but also design milk payment systems to reward farmers’ with high milk quality performances. This type of approach allowed dairy processors to realize the importance of including milk quality management in their collection and manufacturing processes, especially in a context of high competition for milk supply. We concluded that the improvement of milk quality in a smallholder farming context requires a more coordinated effort among stakeholders. Successful implementation of strategies will depend on the willingness of small-scale dairy processors to reward farmers producing high milk quality; but also on the support from the State to provide incentives to the stakeholders in the formal sector.