379 resultados para Capitation fee
Resumo:
The movement for open access to science seeks to achieve unrestricted and free access to academic publications on the Internet. To this end, two mechanisms have been established: the gold road, in which scientific journals are openly accessible, and the green road, in which publications are self-archived in repositories. The publication of the Finch Report in 2012, advocating exclusively the adoption of the gold road, generated a debate as to whether either of the two options should be prioritized. The recommendations of the Finch Report stirred controversy among academicians specialized in open access issues, who felt that the role played by repositories was not adequately considered and because the green road places the burden of publishing costs basically on authors. The Finch Report"s conclusions are compatible with the characteristics of science communication in the UK and they could surely also be applied to the (few) countries with a powerful publishing industry and substantial research funding. In Spain, both the current national legislation and the existing rules at universities largely advocate the green road. This is directly related to the structure of scientific communication in Spain, where many journals have little commercial significance, the system of charging a fee to authors has not been adopted, and there is a good repository infrastructure. As for open access policies, the performance of the scientific communication system in each country should be carefully analyzed to determine the most suitable open access strategy. [Int Microbiol 2013; 16(3):199-203]
Resumo:
Tutkimuksessa on tarkoitus selvittää velallisen asemaa perinnässä ja perintäkulujen merkitystä. Tutkimus jakautuu teoreettiseen ja empiiriseen osaan, jossa selvitetään teoreettisesti velkaan ja perintään liittyviä käsitteitä ja lainsäädäntöä. Laki saatavien perinnästä sääntelee yleislakina perintätoimintaa riippumatta siitä suorittaako perintää itse velkoja vai perimistoimisto. Lakiin otettiin vuonna 2005 kuluttajasaatavia koskevia perimiskuluja rajoittavat enimmäismäärät, jotka on porrastettu saatavan suuruuden mukaan. Empiirisessä osassa tutkitaan oikeudenkäyntiaineistosta kerätyistä tiedoista perintään kuuluvia osapuolia, perittäviä saatavia ja perimiskuluja. Velallisen asema näyttää olevan riittävän hyvin turvattu oikeusjärjestyksessämme, joskin perimiskulujen ja oikeudenkulujen määrä nousee usein itse perittävää pääomaa suuremmaksi. Rahasaatavien perintää koskevien tapausten määrä käräjäoikeuksissa on kasvanut huomattavasti vuonna 2007. Tällaisia velkomuksia käsiteltiin käräjäoikeuksissa yli 200.000 kappaletta vuonna 2007. Tämän kasvun osaltaan selittää uudeksi velkaongelmien aiheuttajaksi nousemassa olevat pikavipit, joiden määrä kaikista perittävistä saatavista oli noin 10%. Näiden pääomat olivat keskiarvoltaan noin 145 euroa, ja näiden perintäkulut noin kaksinkertaisia verrattuna pääomaan Koko aineistossa perityt pääomat olivat keskiarvoltaan noin 2900 euroa ja perintäkulut noin 270 euroa.
Resumo:
Työn tavoitteena on määritellä Etelä-Karjalan Jätehuolto Oy:n toiminta-alueella asumisessa syntyvän jätehuollon palvelutaso muuttunutta jätelainsäädäntöä sekä yhtiön hoidettavaksi siirrettäviä palvelutehtäviä vastaavaksi. Tavoitteena on myös valmistella kunnalliset jätehuoltomääräykset, joilla muutokset pannaan täytäntöön jätehuollon kuljetuksen, keräyksen ja käsittelyn sekä hyötykäyttöön toimittamisen osalta. Tavoitteena on laatia esitys palveluun perustuvasta taksamallista koko toiminta-alueelle. Työn alkuosassa tutustutaan jätelainsäädännön kehittymiseen EU:ssa ja Suomessa sekä valmistelussa oleviin muutoksiin, joilla on vaikutusta jätehuollon suunnittelun ja toteuttamisen kannalta. Tutkitaan miten jätehuoltopalvelut omistajakunnissa on toteutettu ja mitä muutoksia jätelain 10 § ja 13 §:n muutos edellyttää nykyiseen järjestelmään. Työn tuloksena valmistuu maakuntaan asumisen jätehuollon vähimmäispalvelutasoesitys sekä ehdotukset sen kehittämisestä ja kustannusten keräämisestä aiheuttamisperiaatteen mukaisesti alueen yhtenäisillä jätetaksoilla. Jätehuoltomääräysehdotukseen sisällytetään jätehuoltoa koskevat tekniset ja laadulliset vaatimukset sekä keinot, joilla kunnan vastuulla olevia jätteitä saadaan ohjattua hyötykäyttöön.
Resumo:
Packaging has to fulfill a lot of demands and the main purpose is to be able to protect the foodstuff packed inside. Typically requirements set on packaging materials reflect the consumer needs. Based on the consumer studies the importance of product visibility is considered as an important property among consumers. However, making the package more transparent the actual shelf life of the product might be reduced. It might have an effect on sensitive foods which contain ingredients vulnerable to light and start to deteriorate more rapidly. The aim for this Masters of Science Thesis was to develop a paperboard cup with a plastic window where different kind of fatty/dry foodstuffs could be stored. The main target was to be able to create an instruction manual how this kind of cup with a window had to be produced without decreasing air tightness and other barrier properties of cupboard material used as a base board. The focus in this work was on designing a shape of the window and finding critical limits for the size, shape and location of the window in the final paperboard cup. Windows were made by cutting holes with different sizes and shapes to different places in the cup blank by using a model cutter. For the windows one plastic film type was selected due to its low oxygen and water vapour transmission properties. The window film was attached to the cup blank by using hot bar and laser seaming methods. Cup manufacturing was done at Stora Enso InnoCentre, Imatra. As a result critical limits for the place, size and shape of the window could be found. The sealing method had a significant effect on the tightness of the cups. Windows didn’t decrease the grip stiffness of the cup. The cup itself gave better light protection than the plastic film used in the windows. The bigger the window, the less the cup could protect the possible foodstuff. Bursting strength was lower in the windows compared to the cup material itself. From environmental point of view DSD licence fees have to be paid due to the amount of used plastic.When using bigger windows the ratio of plastic to fibres increase. This would raise the DSD fee. However, the amount of material is overall reduced which lowers the fee.
Resumo:
Amb la situació econòmica actual pot ser interessant poder vendre objectes que ja no s’utilitzen i també poder-ne comprar de segona mà. Amb aquesta idea sorgeix el projecte de crear una pàgina de subhastes online on la gent pugui comerciar amb les coses que ja no necessita. Tenint en compte el concepte inicial, el propietari de la pàgina no rebrà cap retribució ni percentatge de cada subhasta, tot l’import serà pel venedor. L’objectiu principal és el de poder oferir un lloc on després de registrar-se, els usuaris puguin veure i pujar per els articles que altres persones estan subhastant i també la possibilitat de crear les seves pròpies subhastes. Cada usuari disposarà d’un espai personal on veure les subhastes amb les que ha interactuat i així no perdre-les de vista i també on poder veure en cada moment l’estat de les subhastes que ha creat. La vista d’una subhasta s’actualitzarà automàticament sense haver de recarregar la pàgina i si algú puja durant l’últim minut la subhasta s’allargarà un minut més per evitar puges a l’últim moment i així maximitzar el preu final. Hi haurà un administrador que serà l’encarregat de gestionar el bon funcionament de la pàgina amb permís per afegir, editar, consultar i eliminar tota la informació disponible. Per portar a terme el projecte s’ha utilitzat PHP per la part de programació i MySQL com a sistema gestor de bases de dades.
Resumo:
Mediayhtiöt miettivät keinoja joilla saataisiin lukijat maksamaan myös verkkopalveluihin julkaistavista sisällöistä. Tässä tutkimuksessa selvitettiin tilaajapohjaisen maksullisen verkkopalvelu-mallin soveltuvuutta Talentum Media Oy:lle sekä kehitettiin yritykselle maksavia asiakkaita houkuttelevan sisältötuotteen konsepti. Tutkimuksessa ei ilmennyt syitä, joiden takia yrityksen olisi syytä lykätä maksullisen verkkopalvelun kehittämistä. Perinteistä lehteä ja sen verkkopalvelua ei kannata nähdä toistensa kilpailijoina. Käyttäjät ovat yhä valmiimpia maksamaan sisällöstä verkossa, kun se on järjestelty houkutteleviksi kokonaisuuksiksi ja paketoitu oikein, sekä kun he säästävät aikaa tai vaivaa verkkopalvelun käytöllä. Verkkopalvelun muuntaminen maksulliseksi on kuitenkin suunniteltava erittäin tarkkaan, muuten käyttäjät saattavat siirtyä ilmaisiin palveluihin. Talentumin verkkopalveluiden käyttäjille tehdyn kyselytutkimuksen mukaan yrityksen verkkopalveluiden käyttäjät maksaisivat mieluiten verkkokoulutuksista, erityisraporteista ja tutkivasta journalismista, ammattikirjojen tiivistelmistä, opastavista tietopaketeista, pörssi- ja yritystiedosta sekä näköislehdistä. Tutkimuksessa kehitettiin maksullisen verkkopalvelun konsepti, joka tarjoaa lukijoille itsensä kehittämisen välineitä sekä informaatiota nopeasti ja vaivattomasti heidän haluamaansa aikaan ja valitsemallaan päätelaitteella. Konseptia seuraavan tuotekehityshankkeen tuloksena syntyvästä verkkopalvelusta odotetaan saatavan merkittävää lisäliikevaihtoa yrityksen online-toiminnoille.
Resumo:
Tämän diplomityön tavoitteena oli kehittää seisontamaksuprosessia löytämällä keinot tehostaa informaation kulkua prosessin eri osapuolten välillä, parantaa prosessin läpimenoaikaa, yhtenäistää toimintakäytäntöjä, sekä vähentää virheellisten seisontamaksulaskujen lähettämistä asiakkaille. Tietoa kerättiin haastatteluin, sähköpostikeskusteluja tutkimalla, sekä analysoimalla numeerista aineistoa seisontamaksuista. Työn teoriaosassa käsiteltiin prosesseja ja niiden kehittämistä yleisesti, muutoksen hallintaa, sekä prosessien kehittämisessä apuna toimivia valmiita kehittämismalleja. Työn empiirisessä osassa kuvattiin seisontamaksuprosessi ja löydettiin siitä suurimmat ongelmakohdat. Tiedonkulku prosessin eri osapuolten välillä osoittautui suurimmaksi ongelmien aiheuttajaksi. Ongelmiin kehitettiin ratkaisut, joiden pohjalta luotiin optimaalinen toimintamalli seisontamaksuprosessista. Lisäksi prosessin tulevan toiminnan seuraamiseksi ehdotettiin erilaisia mittareita. Kehitettyjen ratkaisujen katsottiin täyttäneen kaikki yrityksen asettamat tavoitteet, mutta ratkaisujen tarkemmat vaikutukset prosessin toimintaan näkyvät kuitenkin vasta niiden käyttöönoton jälkeen.
Resumo:
With the objective to stimulate the use of irrigation and the electric energy fee reduction during night time program granted by the 2004 Federal law, the Government of the state of Paraná, Brazil launched the Night Irrigation Program - NPI. Beyond this discount, the farmer that adheres to NPI will get additional benefits, as completion of the electric grid without cost, subsidized financing of equipment, technical assistance, support with environmental farm compliance, and the possibility of replacing the entire pump energy matrix. As part of the NPI strategy of action, installation of learning centers for irrigation technology was planned in agricultural schools, thus contributing both to improve technical professional training in agriculture, and for the dissemination of knowledge in irrigated agriculture, in order to increase agricultural productivity.
Resumo:
Auditor independence is a cornerstone of the auditing profession and the basic principle that underpins the reputation of the auditing profession in the public eye. Indeed, it is the attribute most demanded from auditors by the public. Therefore, the sustainability of the auditing profession depends on how auditors can protect this principle. This dissertation consists of four interrelated essays concerned with auditor independence. Specifically, it examines situations that can threaten and impair auditor independence. In addition, this dissertation also examines several variables that may enhance and protect auditor independence. The first essay aims to examine the impact of social pressures occurring within audit firms on auditors’ judgment in the setting of a society with “high power distance” and “low individualism” cultural dimensions. The social pressures consisted of obedience pressure exerted by an auditor’s superior and conformity pressure exerted by an auditor’s colleague. Moreover, two moderating variables—a multi-dimensional professional commitment and locus of control—were included as moderator variables in the relationship between the social pressures faced by auditors and their judgment. The findings show that obedience and conformity pressures influence auditor judgment. Auditors who face the social pressures will make a judgment that may be even diametrically opposite to the independence principle. The findings also indicate that a multi-dimensional professional commitment and locus of control may potentially influence auditor judgment in a situation with social pressures. The second essay aims to investigate the association of advocacy and familiarity threats caused by auditor fee dependence and auditor tenure on auditor independence based on Finnish data, law, and auditing environment. This essay was motivated by the Green Paper on Audit Policy, published by the European Commission in 2010 that questions whether the maximum fee collected from a client should be regulated and whether consecutive assignments should be limited, among others. Contrary to popular belief, this essay does not find evidence that audit fees and long auditor tenure will jeopardise auditor independence. Therefore, the findings do not support policies to regulate auditor fees or limit auditor tenure in Finland. The third essay aims to examine the effect of client intimidation on auditor independence in an audit-client conflict situation. Intimidation threat is one of five independence threats that are explicitly referenced in the IFAC’s independence framework. Client intimidation was manifested in the client threatening to replace the auditor if the auditor did not adopt the client’s position. In addition, this essay examines the role of auditor’s perceived pressure and multi-dimensions of professional commitment as moderator variables. The findings suggest that auditors who experience client intimidation in an audit conflict situation are more likely to have their independence impaired than those who are in a similar situation but without client intimidation. Moreover, auditors who experience client intimidation perceive higher pressure than those who do not experience intimidation. Finally, auditors’ affective and continuance professional commitment dimensions moderate the relationship between auditors’ perceived pressures and auditor independence. The aim of the fourth essay is twofold. First, it aims to develop a scale for measuring auditors’ reputation awareness. Second, it aims to examine the correlation between the levels of auditor reputation awareness and auditor independence. A seven-item scale was developed as the reputation awareness scale. The findings indicate that the scale consists of one dimension. It also has a level of satisfactory reliability and a high level of validity. The findings show that there is a positive correlation between the level of auditors’ reputation awareness and auditor independence.
Resumo:
Waste incineration plants are increasingly established in China. A low heating value and high moisture content, due to a large proportion of biowaste in the municipal solid waste (MSW), can be regarded as typical characteristics of Chinese MSW. Two incineration technologies have been mainly established in China: stoker grate and circular fluidized bed (CFB). Both of them are designed to incinerate mixed MSW. However, there have been difficulties to reach the sufficient temperature in the combustion process due to the low heating value of the MSW. That is contributed to the usage of an auxiliary fossil fuel, which is often used during the whole incineration process. The objective of this study was to design alternative Waste-to-energy (WTE) scenarios for existing WTE plants with the aim to improve the material and energy efficiency as well as the feasibility of the plants. Moreover, the aim of this thesis was to find the key factors that affect to the feasibility of the scenarios. Five different WTE plants were selected as study targets. The necessary data for calculation was gained from literature as well as received from the operators of the target WTE plants. The created scenarios were based on mechanical-biological treatment (MBT) technologies, in which the produced solid recovered fuel (SRF) was fed as an auxiliary fuel into a WTE plant replacing the fossil fuel. The mechanically separated biowaste was treated either in an anaerobic digestion (AD) plant, a biodrying plant, a thermal drying plant, or a combined AD plant + thermal drying plant. An interactive excel spreadsheet based computation tool was designed to estimate the viability of the scenarios in different WTE cases. The key figures of the improved material and energy efficiency, such as additional electricity generated and avoided waste for landfill, were got as results. Furthermore, economic indicators such as annual profits (or costs), payback period, and internal rate of return (IRR) were gained as results. The results show that the AD scenario was the most profitable in most of the cases. The current heating value of MSW and the tipping fee for the received MSW appeared as the most important factor in terms of feasibility.
Resumo:
Tutkimuksen tavoitteena oli tutkia yleislääkärin vastaanottotapahtuman laadun eri ulottuvuuksia, erityisesti lääkärin ja potilaan arvioita vastaanottotapahtuman laadusta, sekä verrata näitä arvioita keskenään. Lisäksi tarkoituksena oli tutkia palkkausjärjestelmän yhteyttä laatuun sekä löytää sopivia välineitä yleislääkärin vastaanottotapahtuman laadun arviointiin. Tutkimuksessa käytettiin triangulaatiota sekä materiaalien, tutkijoiden että menetelmien osalta. Materiaali koostui kyselylomakkeista (2191 vastaanottotapahtumaa, 2167 lääkärin lomaketta ja 1777 potilaan lomaketta), potilasasiakirjoista (n=175) ja vastaanottotapahtumien videoinneista (n=20). Analyysissä käytettiin sekä kvantitatiivisia että kvalitatiivisia menetelmiä. Laatu koostuu tässä tutkimuksessa tieteellisteknisestä/ammatillisesta osaamisesta, vuorovaikutustaidoista ja taloudellisesta laadusta. Kaikki osatekijät olivat kyselylomaketutkimuksen perusteella varsin hyviä, ja potilaat arvioivat laadun kaikki osatekijät paremmiksi kuin lääkärit. Potilaiden selviytyminen ja voimaantuminen vastaanottotapahtuman jälkeen oli parempaa, mikäli he pitivät vuorovaikutuksen laatua hyvänä ja lääkäriä omalääkärinään. Kyselylomaketutkimus antoi laadusta kuitenkin positiivisemman kuvan kuin tutkijoiden potilasasiakirjojen ja videointien avulla tekemät arviot. Potilasasiakirjat oli laadittu puutteellisesti ja potilasasiakirjajärjestelmät vaikuttivat postilaisasiakirjojen laatuun. Tutkijoiden arvioimana lääkäreiden vuorovaikutustaidot olivat keskimäärin tyydyttävät. Lääkärin virkaehtosopimus ei näyttänyt vaikuttavan potilaan kokemaan laatuun, mutta väestövastuulääkärit kokivat sekä oman työnsä ammatillisen laadun että vuorovaikutustaitonsa paremmaksi kuin muut lääkärit. Väestövastuuterveyskeskuksissa myös hoidon jatkuvuus ja potilaan valinnanvapaus näyttivät toteutuvan muita terveyskeskuksia paremmin. Yleislääkärin työn laadun arviointiin tarvitaan useita menetelmiä. Potilasasiakirjajärjestelmien tulisi olla helppokäyttöisiä, interaktiivisia ja tietoa automaattisesti kerääviä, jotta niistä saataisiin luotettavaa tietoa laadun arvioimiseksi. Lääkärin työn itsearviointia on edelleen tutkittava ja kehitettävä.
Resumo:
The pressure has grown to develop cost-effective emission reduction strategies in the Baltic Sea. The forthcoming stringent regulations of the International Maritime Organization for reducing harmful emissions of shipping in the Baltic Sea are causing increasing expenses for the operators. A market-based attitude towards pricing of economic incentives could be seen as a new approach for a successful application for the additional emission reduction of nitrogen oxides (NOx). In this study the aim is to understand the phenomenon of environmentally differentiated port fees and its effects on shipping companies’ emission reduction investments. The goal is to examine empirically the real-life effects of the possible environmental differentiated port fee system and the effect of environmentally differentiated port fees on NOx reduction investments in the Baltic Sea. The research approach of this study is nomothetical. In this study research questions are answered by analyzing the broad database of the Baltic Sea fleet. Also the framework of theory is confirmed and plays an important role in analyzing the research problem. Existing investment costs of NOx emission reduction technology to ship owners are estimated and compared to investment costs with granted discounts added to the cash flows. The statistical analysis in this study is descriptive. The major statistic examination of this study is the calculation of the net present values of investments with different port fee scenarios. This is done to investigate if the NOx technology investments could be economically reasonable. Based on calculations it is clear that the effect of environmentally differentiated port fees is not adequate to compensate the total investment costs for NOx reduction. If the investment decision is made only with profitability considerations, sources will prefer to emission abatement as long as incomes from the given subsidy exceeds their abatement costs. Despite of the results, evidence was found that shipping companies are nevertheless willing to invest on voluntary emission abatement technology. In that case, investment decision could be made with criteria of, for example, sustainable strategy or brand image. Combined fairway and port fee system or governmental regulations and recommendation could also function as additional incentives to compensate the investment costs. Also, the results imply that the use of NPV is not necessarily the best method to evaluate environmental investments. If the calculations would be done with more environmental methods the results would probably be different.
Resumo:
The greatest threat that the biodegradable waste causes on the environment is the methane produced in landfills by the decomposition of this waste. The Landfill Directive (1999/31/EC) aims to reduce the landfilling of biodegradable waste. In Finland, 31% of biodegradable municipal waste ended up into landfills in 2012. The pressure of reducing disposing into landfills is greatly increased by the forthcoming landfill ban on biodegradable waste in Finland. There is a need to discuss the need for increasing the utilization of biodegradable waste in regional renewable energy production to utilize the waste in a way that allows the best possibilities to reduce GHG emissions. The objectives of the thesis are: (1) to find important factors affecting renewable energy recovery possibilities from biodegradable waste, (2) to determine the main factors affecting the GHG balance of biogas production system and how to improve it and (3) to find ways to define energy performance of biogas production systems and what affects it. According to the thesis, the most important factors affecting the regional renewable energy possibilities from biodegradable waste are: the amount of available feedstock, properties of feedstock, selected utilization technologies, demand of energy and material products and the economic situation of utilizing the feedstocks. The biogas production by anaerobic digestion was seen as the main technology for utilizing biodegradable waste in agriculturally dense areas. The main reason for this is that manure was seen as the main feedstock, and it can be best utilized with anaerobic digestion, which can produce renewable energy while maintaining the spreading of nutrients on arable land. Biogas plants should be located close to the heat demand that would be enough to receive the produced heat also in the summer months and located close to the agricultural area where the digestate could be utilized. Another option for biogas use is to upgrade it to biomethane, which would require a location close to the natural gas grid. The most attractive masses for biogas production are municipal and industrial biodegradable waste because of gate fees the plant receives from them can provide over 80% of the income. On the other hand, directing gate fee masses for small-scale biogas plants could make dispersed biogas production more economical. In addition, the combustion of dry agricultural waste such as straw would provide a greater energy amount than utilizing them by anaerobic digestion. The complete energy performance assessment of biogas production system requires the use of more than one system boundary. These can then be used in calculating output–input ratios of biogas production, biogas plant, biogas utilization and biogas production system, which can be used to analyze different parts of the biogas production chain. At the moment, it is difficult to compare different biogas plants since there is a wide variation of definitions for energy performance of biogas production. A more consistent way of analyzing energy performance would allow comparing biogas plants with each other and other recovery systems and finding possible locations for further improvement. Both from the GHG emission balance and energy performance point of view, the energy consumption at the biogas plant was the most significant factor. Renewable energy use to fulfil the parasitic energy demand at the plant would be the most efficient way to reduce the GHG emissions at the plant. The GHG emission reductions could be increased by upgrading biogas to biomethane and displacing natural gas or petrol use in cars when compared to biogas CHP production. The emission reductions from displacing mineral fertilizers with digestate were seen less significant, and the greater N2O emissions from spreading digestate might surpass the emission reductions from displacing mineral fertilizers.
Resumo:
This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.