Tagebuch der Operationen der Armee von Catalonien in den Jahren 1808 und 1809, unter den Befehlen des Generals Gouvion Saint-Cyr. Oder, Beiträge zur Geschichte des Spanischen Krieges, von dem Marschall Gouvion Saint-Cyr.

Mode of access: Internet.

OEuvres de Saint-Simon & d'Enfantin : précédées de deux notices historiques et publiées /

Lib. has reprint: Aalen, O. Zeller, 1963-64.

Histoire du Bas-Empire,

"Notice historique sur m. A-J. Saint-Martin", by Brosset: xxij p. at beginnings of v. 13.

Étude historique sur le canton de Bas-en-Basset,

Mode of access: Internet.

Musée des monumens français, ou Description historique et chronologique des statues en marbre et en bronze, bas-reliefs et tombeaux des hommes et des femmes célèbres, pour servir à l'histoire de France et à celle de l'art; ornée de gravures; et augm. d'une dissertation sur les costumes de chaque siècle;

"Notes historiques sur les exhumations faites on 1793, dans l'Abbaye de Saint-Denis": v. 2, p. [cvi]-cxxxii.

Plutarque des Pays-Bas, ou vies des hommes illustres de ce royaume;

Mode of access: Internet.

Recueil des ordonnances des Pays-Bas. Deuxième sèrie, 1506-1700 ...

Editiors:--t. 1-2, Ch. Laurent; t. 3,6, J. Lameere; t. 4-5, J. Lameere and H. Simont.

La-bas et ailleurs /

From Bib. Nat.: "Mitchi est le pseudonyme de Jacques Saint-Cère."

Esprit Futur : Le Corbusier and José Oubrerie at Saint-Pierre De Firminy, Firminy-Vert, France, 1968–2006

What is the secret mesmerism that death possesses and under the operation of which a modern architect – strident, confident, resolute – becomes rueful, pessimistic, or melancholic?1 Five years before Le Corbusier’s death at sea in 1965, the architect reluctantly agreed to adopt the project for L’Église Saint-Pierre de Firminy in Firminy-Vert (1960–2006), following the death of its original architect, André Sive, from leukemia in 1958.2 Le Corbusier had already developed, in 1956, the plan for an enclave in the new “green” Firminy town, which included his youth and culture center and a stadium and swimming pool; the church and a “boîte à miracles” near the youth center were inserted into the plan in the ’60s. (Le Corbusier was also invited, in 1962, to produce another plan for three Unités d’Habitation outside Firminy-Vert.) The Saint-Pierre church should have been the zenith of the quartet (the largest urban concentration of works by Le Corbusier in Europe, and what the architect Henri Ciriani termed Le Corbusier’s “acropolis”3) but in the early course of the project, Le Corbusier would suffer the diocese’s serial objections to his vision for the church – not unlike the difficulties he experienced with Notre Dame du Haut at Ronchamp (1950–1954) and the resistance to his proposed monastery of Sainte-Marie de la Tourette (1957–1960). In 1964, the bishop of Saint-Étienne requested that Le Corbusier relocate the church to a new site, but Le Corbusier refused and the diocese subsequently withdrew from the project. (With neither the approval, funds, nor the participation of the bishop, by then the cardinal archbishop of Lyon, the first stone of the church was finally laid on the site in 1970.) Le Corbusier’s ambivalence toward the project, even prior to his quarrels with the bishop, reveals...

Writer Clara Michelson (second from left) seated at an outdoor table with three unidentified women and one unidentified man; Saint-Brevin-les-Pins, France Portraits Groups

Digital Image

Atomic Layer Deposition of Electroluminescent ZnS, SrS, and BaS Thin Films

The light emitted by flat panel displays (FPD) can be generated in many different ways, such as for example alternating current thin film electroluminescence (ACTFEL), liquid crystal display (LCD), light emitting diode (LED), or plasma display panel (PDP) technologies. In this work, the focus was on ACTFEL devices and the goal was to develop new thin film processes for light emitting materials in ACTFEL devices. The films were deposited with the atomic layer deposition (ALD) method, which has been utilized in the manufacturing of ACTFEL displays since the mid-1980s. The ALD method is based on surface-controlled self-terminated reactions and a maximum of one layer of the desired material can be prepared during one deposition cycle. Therefore, the film thickness can be controlled simply by adjusting the number of deposition cycles. In addition, both large areas and deep trench structures can be covered uniformly. During this work, new ALD processes were developed for the following thin film materials: BaS, CuxS, MnS, PbS, SrS, SrSe, SrTe, SrS1-xSex, ZnS, and ZnS1-xSex. In addition, several ACTFEL devices were prepared where the light emitting material was BaS, SrS, SrS1-xSex, ZnS, or ZnS1-xSex thin film that was doped with Ce, Cu, Eu, Mn, or Pb. The sulfoselenide films were made by substituting the elemental selenium for sulfur on the substrate surface during film deposition. In this way, it was possible to replace a maximum of 90% of the sulfur with selenium, and the XRD analyses indicated that the films were solid solutions. The polycrystalline BaS, SrS, and ZnS thin films were deposited at 180-400, 120-460, and 280-500 °C, respectively, and the processes had a wide temperature range where the growth rate of the films was independent of the deposition temperature. The electroluminescence studies showed that the doped sulfoselenide films resulted in low emission intensity. However, the emission intensities and emission colors of the doped SrS, BaS, and ZnS films were comparable with those found in earlier studies. It was also shown that the electro-optical properties of the different ZnS:Mn devices were different as a consequence of different ZnS:Mn processes. Finally, it was concluded that because the higher deposition temperature seemed to result in a higher emission intensity, the thermal stability of the reactants has a significant role when the light emitting materials of ACTFEL devices are deposited with the ALD method.

A finite element method for the Saint-Venant torsion and bending problems for prismatic beams

In this work, we present a finite element formulation for the Saint-Venant torsion and bending problems for prismatic beams. The torsion problem formulation is based on the warping function, and can handle multiply-connected regions (including thin-walled structures), compound and anisotropic bars. Similarly, the bending formulation, which is based on linearized elasticity theory, can handle multiply-connected domains including thin-walled sections. The torsional rigidity and shear centers can be found as special cases of these formulations. Numerical results are presented to show the good coarse-mesh accuracy of both the formulations for both the displacement and stress fields. The stiffness matrices and load vectors (which are similar to those for a variable body force in a conventional structural mechanics problem) in both formulations involve only domain integrals, which makes them simple to implement and computationally efficient. (C) 2014 Elsevier Ltd. All rights reserved.

Voyage dans les provinces de Saint-Paul et de Sainte-Catherine

As Voyages... são estudos completos, abrangendo todos os aspectos das regiões percorridas; servem de subsídio ao estudo das condições de vida no Brasil no século passado. "Fonte primordial de informações sobre os prédios coloniais do Rio de Janeiro, Minas Gerais, São Paulo, Santa Catarina e Goiás. Poucas obras no gênero atingem o valor de Saint-Hilarire. São clássicas e indispensáveis para o estudo do sul do Brasil, antes da Independência" segundo Borba de Moraes