Bond strength of AH Plus and Epiphany sealers on root dentine irradiated with 980 nm diode laser

Aim To evaluate the bond strength of AH Plus and Epiphany sealers to human root canal dentine irradiated with a 980 nm diode laser at different power and frequency parameters, using the push-out test. Methodology Sixty canine roots were sectioned below the cementoenamel junction to provide 4-mm-thick dentine discs that had their root canals prepared with a tapered bur and irrigated with sodium hypochlorite, ethylenediaminetetraacetic acid and distilled water. The specimens were assigned to five groups (n = 12): one control (no laser) and four experimental groups that were submitted to 980 nm diode laser irradiation at different power (1.5 and 3.0 W) and frequency (continuous wave and 100 Hz) parameters. Half of specimens in each group had their canals filled with AH Plus sealer and half with Epiphany. The push-out test was performed and data (MPa) were analysed statistically by ANOVA and Tukey`s test (P < 0.05). The specimens were split longitudinally and examined under SEM to assess the failure modes after sealer displacement. Results The specimens irradiated with the diode laser and filled with AH Plus had significantly higher bond strength values (8.69 +/- 2.44) than those irradiated and filled with Epiphany (3.28 +/- 1.58) and the nonirradiated controls (3.86 +/- 0.60). The specimens filled with Epiphany did not differ significantly to each other or to the control (1.75 +/- 0.69). There was a predominance of adhesive failures at Epiphany-dentine interface (77%) and mixed failures at AH Plus-dentine interface (67%). Conclusions The 980 nm diode laser irradiation of root canal dentine increased the bond strength of AH Plus sealer, but did not affect the adhesion of Epiphany sealer.

A comparison of Kodak Ultraspeed and Ektaspeed Plus dental X-ray films for the detection of dental caries

Background: Using the fastest dental X-ray film available is an easy way of reducing exposure to ionizing radiation. However, the diagnostic ability of fast films for the detection of proximal surface caries must be demonstrated before these films will become universally accepted. Methods: Extracted premolar and molar teeth were arranged to simulate a bitewing examination and radiographed using Ultraspeed and Ektaspeed Plus dental X-ray films. Three different exposure times were used for each film type. Six general dentists were used to determine the presence and depth of the decay in the proximal surfaces of the teeth radiographed. The actual extent of the decay in the teeth was determined by sectioning the teeth and examining them under a microscope. Results: There was no significant difference between the two films for the mean correct diagnosis. However, there was a significant difference between the means for the three exposure times used for Ultraspeed film. The practitioners used were not consistent in their ability to make a correct diagnosis, or for the film for which they got the highest correct diagnosis. Conclusions: Ektaspeed Plus dental X-ray film is just as reliable as Ultraspeed dental X-ray film for the detection of proximal surface decay. The effect of underexposure was significant for Ultraspeed, but not for Ektaspeed Plus. Patient exposure can be reduced significantly with no loss of diagnostic ability by changing from Ultraspeed X-ray film to Ektaspeed Plus X-ray film.

Prediction of absolute rate coefficients and product branching ratios for the C(P-3) plus allene reaction system

Complex chemical reactions in the gas phase can be decomposed into a network of elementary (e.g., unimolecular and bimolecular) steps which may involve multiple reactant channels, multiple intermediates, and multiple products. The modeling of such reactions involves describing the molecular species and their transformation by reaction at a detailed level. Here we focus on a detailed modeling of the C(P-3)+allene (C3H4) reaction, for which molecular beam experiments and theoretical calculations have previously been performed. In our previous calculations, product branching ratios for a nonrotating isomerizing unimolecular system were predicted. We extend the previous calculations to predict absolute unimolecular rate coefficients and branching ratios using microcanonical variational transition state theory (mu-VTST) with full energy and angular momentum resolution. Our calculation of the initial capture rate is facilitated by systematic ab initio potential energy surface calculations that describe the interaction potential between carbon and allene as a function of the angle of attack. Furthermore, the chemical kinetic scheme is enhanced to explicitly treat the entrance channels in terms of a predicted overall input flux and also to allow for the possibility of redissociation via the entrance channels. Thus, the computation of total bimolecular reaction rates and partial capture rates is now possible. (C) 2002 American Institute of Physics.

O peso do varejo, o peso no varejo e a identidade: uma análise de consumidoras plus size

Este trabalho estuda o conceito de identidade sob a ótica do consumo feminino de moda plus size. Foram realizadas 14 entrevistas fenomenológicas, observadas por uma perspectiva hermenêutica. Três categorias temáticas emergiram dos dados: a construção da identidade pela moda, o que envolve ser plus size e estratégias criativas para lidar com a configuração do portfólio de produtos no varejo, que não favorece mulheres plus size. Entre os principais resultados, destacam-se a forma pela qual o termo plus size age como estigma, influenciando os projetos identitários das consumidoras, o papel do varejo na estigmatização e a saga quase epopeica das compras, que envolve até um "mercado negro" com as vendedoras.

Simulação de processos de adsorção recorrendo ao Aspen Chromatography

As operações de separação por adsorção têm vindo a ganhar importância nos últimos anos, especialmente com o desenvolvimento de técnicas de simulação de leitos móveis em colunas, tal como a cromatografia de Leito Móvel Simulado (Simulated Moving Bed, SMB). Esta tecnologia foi desenvolvida no início dos anos 60 como método alternativo ao processo de Leito Móvel Verdadeiro (True Moving Bed, TMB), de modo a resolver vários dos problemas associados ao movimento da fase sólida, usuais nestes métodos de separação cromatográficos de contracorrente. A tecnologia de SMB tem sido amplamente utilizada em escala industrial principalmente nas indústrias petroquímica e de transformação de açúcares e, mais recentemente, na indústria farmacêutica e de química fina. Nas últimas décadas, o crescente interesse na tecnologia de SMB, fruto do alto rendimento e eficiente consumo de solvente, levou à formulação de diferentes modos de operação, ditos não convencionais, que conseguem unidades mais flexíveis, capazes de aumentar o desempenho de separação e alargar ainda mais a gama de aplicação da tecnologia. Um dos exemplos mais estudados e implementados é o caso do processo Varicol, no qual se procede a um movimento assíncrono de portas. Neste âmbito, o presente trabalho foca-se na simulação, análise e avaliação da tecnologia de SMB para dois casos de separação distintos: a separação de uma mistura de frutose-glucose e a separação de uma mistura racémica de pindolol. Para ambos os casos foram considerados e comparados dois modos de operação da unidade de SMB: o modo convencional e o modo Varicol. Desta forma, foi realizada a implementação e simulação de ambos os casos de separação no simulador de processos Aspen Chromatography, mediante a utilização de duas unidades de SMB distintas (SMB convencional e SMB Varicol). Para a separação da mistura frutose-glucose, no quediz respeito à modelização da unidade de SMB convencional, foram utilizadas duas abordagens: a de um leito móvel verdadeiro (modelo TMB) e a de um leito móvel simulado real (modelo SMB). Para a separação da mistura racémica de pindolol foi considerada apenas a modelização pelo modelo SMB. No caso da separação da mistura frutose-glucose, procedeu-se ainda à otimização de ambas as unidades de SMB convencional e Varicol, com o intuito do aumento das suas produtividades. A otimização foi realizada mediante a aplicação de um procedimento de planeamento experimental, onde as experiências foram planeadas, conduzidas e posteriormente analisadas através da análise de variância (ANOVA). A análise estatística permitiu selecionar os níveis dos fatores de controlo de modo a obter melhores resultados para ambas as unidades de SMB.

Les Plus Anciens Mastodontes Tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la Tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet genetically separated beyond fertile cross-breeding, i.e. beyond species' level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus'ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but significant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Notes sur la géologie et la paleontology du Miocène de Lisbonne; (XX) les plus anciens mastodontes tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet geneticaliy separated beyond fertile cross-breeding, i.e. beyond species'level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus' ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but signifiant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Delayed results of treatment of paracoccidioidomycosis with amphotericin B plus sulfamides versus amphotericin B alone

A delayed evaluation of two groups of patients with paracoccidioidomycosis was carried out. Both groups were treated with amphotericin B, "but one of them was submitted to maintenance treatment with sulfonamides. Statistical analysis showed that treatment is more effective when patients are maintained with sulfonamide drugs.

Les plus anciens mammifères terrestres du Miocène marin de Lisbonne - le gisement du Km 10

For the first time, small mammals were found at the earliest marine level in the northeastern part of the lower Tagus basin, to the NE of Lisbon. At this new locality, at the 10 kilometer of the Lisbon-Oporto A1-IP1 highway,conglomerates yielded, along with marine fossils, more or less abraded teeth and bones from insectivores,lagomorphs, rodents and small artiodactyls (sec Tableau 1). Age may he ascribed to the lower Miocene, MN 2b Neogene mammal unit (about 22 My), but an early MN 3 age cannot be entirely excluded. That corresponds to latest Aquitanian (or less probably earliest Burdigalian) (sec Tableau 2). This is the first hitherto found locality with small mammals of this age as far as Portugal is concerned, as well as the oldest locality so far known in the Tagus basin. Km 10 is somewhat older than the localities of Universidade Católica and Avenida do Uruguay in Lisbon (ANTUNES & MEIN, 1986). Hence we can rather accurately date the age of the first marine transgression in the northeastern part of the lower Tagus basin. This shows that in this region there are no marine equivalents of the "Venus ribeiroi beds" (Aquitanian,Division 1 of the Lisbon Miocene series). Correlation between this unit and the uppermost levels of the essentially paleogene "Complexo de Benfica" may be possible. Fossils at km 10 point out to shallow, coastal, highenergy marine environments. Sedimentological features are compatible with this model. Dry land and swamps with brackish (or ev en fresh) waters were present nearby. From those areas came remains of mammals, crocodylians, as well as oysters and charophytes that were later transported to the sea. Sea was warmer than the extant Atlantic at the same latitudes, even if conditions were not strictly tropical then. These conditions surely influenced climate in the nearby regions. Ecological data concerning mammalian faunas distinctly point out to nearby forest-rich environments, much more so than for Universidade Católica and Avenida do Uruguay localities, from where drier, even steppe environment forms largely prevail.

Randomized, double-blind trial comparing indinavir alone, zidovudine alone and indinavir plus zidovudine in antiretroviral therapy-naive hiv-infected individuals with CD4 cell counts between 50 and 250/mm3

Treatment with indinavir has been shown to result in marked decreases in viral load and increases in CD4 cell counts in HIV-infected individuals. A randomized double-blind study to evaluate the efficacy of indinavir alone (800 mg q8h), zidovidine alone (200 mg q8h) or the combination was performed to evaluate progression to AIDS. 996 antiretroviral therapy-naive patients with CD4 cell counts of 50-250/mm3 were allocated to treatment. During the trial the protocol was amended to add lamivudine to the zidovudine-containing arms. The primary endpoint was time to development of an AIDS-defining illness or death. The study was terminated after a protocol-defined interim analysis demonstrated highly significant reductions in progression to a clinical event in the indinavir-containing arms, compared to the zidovudine arm (p<0.0001). Over a median follow-up of 52 weeks (up to 99 weeks), percent reductions in hazards for the indinavir plus zidovudine and indinavir groups compared to the zidovudine group were 70% and 61%, respectively. Significant reductions in HIV RNA and increases in CD4 cell counts were also seen in the indinavir-containing groups compared to the zidovudine group. Improvement in both CD4 cell count and HIV RNA were associated with reduced risk of disease progression. All three regimens were generally well tolerated.

Desempenho energético de edifícios residenciais no contexto da regulamentação térmica com recurso ao Energy Plus e TRNSYS

Dissertação para obtenção do Grau de Mestre em Engenharia Civil

Acquisition of Plus Discount by Jerónimo Martins

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Autoimmune hemolytic anemia in HCV/HIV coinfected patients during treatment with pegylated alpha-2a interferon plus ribavirin

Two cases of autoimmune hemolytic anemia that occurred during the treatment of chronic hepatitis C with pegylated alpha-2a interferon and ribavirin, in HIV coinfected patients, are presented and described. The late occurrence (after six months of therapy) of this severe hemolytic anemia leads to the recommendation that hemoglobin levels should be monitored throughout the treatment period, even among patients who presented stable hemoglobin levels in the preceding months.