Parameterization and Evaluation of Predictions of DSSAT/CANEGRO for Brazilian Sugarcane

The DSSAT/CANEGRO model was parameterized and its predictions evaluated using data from five sugarcane (Sacchetrum spp.) experiments conducted in southern Brazil. The data used are from two of the most important Brazilian cultivars. Some parameters whose values were either directly measured or considered to be well known were not adjusted. Ten of the 20 parameters were optimized using a Generalized Likelihood Uncertainty Estimation (GLUE) algorithm using the leave-one-out cross-validation technique. Model predictions were evaluated using measured data of leaf area index (LA!), stalk and aerial dry mass, sucrose content, and soil water content, using bias, root mean squared error (RMSE), modeling efficiency (Eff), correlation coefficient, and agreement index. The Decision Support System for Agrotechnology Transfer (DSSAT)/CANEGRO model simulated the sugarcane crop in southern Brazil well, using the parameterization reported here. The soil water content predictions were better for rainfed (mean RMSE = 0.122mm) than for irrigated treatment (mean RMSE = 0.214mm). Predictions were best for aerial dry mass (Eff = 0.850), followed by stalk dry mass (Eff = 0.765) and then sucrose mass (Eff = 0.170). Number of green leaves showed the worst fit (Eff = -2.300). The cross-validation technique permits using multiple datasets that would have limited use if used independently because of the heterogeneity of measures and measurement strategies.

Estimation of percentage body fat in 6- to 13-year-old children by skinfold thickness, body mass index and waist circumference.

We evaluated the accuracy of skinfold thicknesses, BMI and waist circumference for the prediction of percentage body fat (PBF) in a representative sample of 372 Swiss children aged 6-13 years. PBF was measured using dual-energy X-ray absorptiometry. On the basis of a preliminary bootstrap selection of predictors, seven regression models were evaluated. All models included sex, age and pubertal stage plus one of the following predictors: (1) log-transformed triceps skinfold (logTSF); (2) logTSF and waist circumference; (3) log-transformed sum of triceps and subscapular skinfolds (logSF2); (4) log-transformed sum of triceps, biceps, subscapular and supra-iliac skinfolds (logSF4); (5) BMI; (6) waist circumference; (7) BMI and waist circumference. The adjusted determination coefficient (R² adj) and the root mean squared error (RMSE; kg) were calculated for each model. LogSF4 (R² adj 0.85; RMSE 2.35) and logSF2 (R² adj 0.82; RMSE 2.54) were similarly accurate at predicting PBF and superior to logTSF (R² adj 0.75; RMSE 3.02), logTSF combined with waist circumference (R² adj 0.78; RMSE 2.85), BMI (R² adj 0.62; RMSE 3.73), waist circumference (R² adj 0.58; RMSE 3.89), and BMI combined with waist circumference (R² adj 0.63; RMSE 3.66) (P < 0.001 for all values of R² adj). The finding that logSF4 was only modestly superior to logSF2 and that logTSF was better than BMI and waist circumference at predicting PBF has important implications for paediatric epidemiological studies aimed at disentangling the effect of body fat on health outcomes.

Multiway Array Decomposition Analysis of EEGs in Alzheimer’s Disease

Methods for the extraction of features from physiological datasets are growing needs as clinical investigations of Alzheimer’s disease (AD) in large and heterogeneous population increase. General tools allowing diagnostic regardless of recording sites, such as different hospitals, are essential and if combined to inexpensive non-invasive methods could critically improve mass screening of subjects with AD. In this study, we applied three state of the art multiway array decomposition (MAD) methods to extract features from electroencephalograms (EEGs) of AD patients obtained from multiple sites. In comparison to MAD, spectral-spatial average filter (SSFs) of control and AD subjects were used as well as a common blind source separation method, algorithm for multiple unknown signal extraction (AMUSE). We trained a feed-forward multilayer perceptron (MLP) to validate and optimize AD classification from two independent databases. Using a third EEG dataset, we demonstrated that features extracted from MAD outperformed features obtained from SSFs AMUSE in terms of root mean squared error (RMSE) and reaching up to 100% of accuracy in test condition. We propose that MAD maybe a useful tool to extract features for AD diagnosis offering great generalization across multi-site databases and opening doors to the discovery of new characterization of the disease.

A priori parameterisation of the CERES soil-crop models and tests against several European data sets

Mechanistic soil-crop models have become indispensable tools to investigate the effect of management practices on the productivity or environmental impacts of arable crops. Ideally these models may claim to be universally applicable because they simulate the major processes governing the fate of inputs such as fertiliser nitrogen or pesticides. However, because they deal with complex systems and uncertain phenomena, site-specific calibration is usually a prerequisite to ensure their predictions are realistic. This statement implies that some experimental knowledge on the system to be simulated should be available prior to any modelling attempt, and raises a tremendous limitation to practical applications of models. Because the demand for more general simulation results is high, modellers have nevertheless taken the bold step of extrapolating a model tested within a limited sample of real conditions to a much larger domain. While methodological questions are often disregarded in this extrapolation process, they are specifically addressed in this paper, and in particular the issue of models a priori parameterisation. We thus implemented and tested a standard procedure to parameterize the soil components of a modified version of the CERES models. The procedure converts routinely-available soil properties into functional characteristics by means of pedo-transfer functions. The resulting predictions of soil water and nitrogen dynamics, as well as crop biomass, nitrogen content and leaf area index were compared to observations from trials conducted in five locations across Europe (southern Italy, northern Spain, northern France and northern Germany). In three cases, the model’s performance was judged acceptable when compared to experimental errors on the measurements, based on a test of the model’s root mean squared error (RMSE). Significant deviations between observations and model outputs were however noted in all sites, and could be ascribed to various model routines. In decreasing importance, these were: water balance, the turnover of soil organic matter, and crop N uptake. A better match to field observations could therefore be achieved by visually adjusting related parameters, such as field-capacity water content or the size of soil microbial biomass. As a result, model predictions fell within the measurement errors in all sites for most variables, and the model’s RMSE was within the range of published values for similar tests. We conclude that the proposed a priori method yields acceptable simulations with only a 50% probability, a figure which may be greatly increased through a posteriori calibration. Modellers should thus exercise caution when extrapolating their models to a large sample of pedo-climatic conditions for which they have only limited information.

Evaluation of the realism of climate reconstruction using the Coexistence Approach with modern pollen samples from the Tibetan Plateau

We apply the Coexistence Approach (CoA) to reconstruct mean annual precipitation (MAP), mean annual temperature (MAT), mean temperature of thewarmestmonth (MTWA) and mean temperature of the coldest month (MTCO) at 44 pollen sites on the Qinghai–Tibetan Plateau. The modern climate ranges of the taxa are obtained (1) from county-level presence/absence data and (2) from data on the optimum and range of each taxon from Lu et al. (2011). The CoA based on the optimumand range data yields better predictions of observed climate parameters at the pollen sites than that based on the county-level data. The presence of arboreal pollen, most of which is derived fromoutside the region, distorts the reconstructions. More reliable reconstructions are obtained using only the non-arboreal component of the pollen assemblages. The root mean-squared error (RMSE) of the MAP reconstructions are smaller than the RMSE of MAT, MTWA and MTCO, suggesting that precipitation gradients are the most important control of vegetation distribution on the Qinghai–Tibetan Plateau. Our results show that CoA could be used to reconstruct past climates in this region, although in areas characterized by open vegetation the most reliable estimates will be obtained by excluding possible arboreal contaminants.

Convex combinations of long memory estimates from different sampling rates

Convex combinations of long memory estimates using the same data observed at different sampling rates can decrease the standard deviation of the estimates, at the cost of inducing a slight bias. The convex combination of such estimates requires a preliminary correction for the bias observed at lower sampling rates, reported by Souza and Smith (2002). Through Monte Carlo simulations, we investigate the bias and the standard deviation of the combined estimates, as well as the root mean squared error (RMSE), which takes both into account. While comparing the results of standard methods and their combined versions, the latter achieve lower RMSE, for the two semi-parametric estimators under study (by about 30% on average for ARFIMA(0,d,0) series).

Towards the construction of a validated numerical system to study the mesoscale dynamics of the North East Atlantic (2003-2006)

Máster en Oceanografía

Sistematización de suelos : eficiencia en la ejecución del proyecto en suelos complejos

El manejo sustentable de los recursos naturales relacionados con proyectos de utilización de los recursos hídricos (entre otros), requiere en muchos casos de la modificación del relieve existente. Esto conlleva la necesidad de adecuación de la capa homogénea superior del suelo, operación que suele denominarse "sistematización", la cual facilita una distribución más uniforme de las lluvias y del agua de riego. Esta modificación de la capa superior del suelo es realizada en base a un proyecto, cuya inclinación responda a las pendientes naturales o a las establecidas por el diseñador. En la ejecución del diseño proyectado, en superficies superiores a una hectárea, el movimiento de tierra se realiza con equipos pesados, que no aseguran un alto porcentaje de eficiencia en lo que al movimiento de tierra se refiere, ya que parte del material se pierde en el acarreo, pero muy especialmente, por la compactación desuniforme del mismo, asociada con las texturas complejas del suelo a trabajar. El presente trabajo determinó el índice de precisión en la ejecución del proyecto de sistematización a partir de un índice estadístico internacionalmente aceptado, el "Root Mean Squared Error (RMSE)", comparando los valores altimétricos proyectados y los realmente obtenidos luego de la ejecución del proyecto, en tres parcelas con distinta secuencia de labores y maquinaria utilizadas, pero con el mismo tipo de suelo en el área del eje Pilar - La Plata (Argentina). Los resultados obtenidos, que varían de un RMSE de 4 a 6 cm, permiten concluir, para los sitios y las condiciones estudiadas, que no pueden asegurarse en la sistematización índices de precisión en la ejecución de la obra, inferiores a los 4 cm.

Inference of binding affinity from neuronal receptors in humans

Tese de mestrado, Bioinformática e Biologia Computacional (Bioinformática), Universidade de Lisboa, Faculdade de Ciências, 2016

Disentangling the impact of seroconversion age and set-point viral load on ART-free HIV survival

Thesis (Master's)--University of Washington, 2016-06

Mitigating congestion by integrating time forecasting and realtime information aggregation in cellular networks

An iterative travel time forecasting scheme, named the Advanced Multilane Prediction based Real-time Fastest Path (AMPRFP) algorithm, is presented in this dissertation. This scheme is derived from the conventional kernel estimator based prediction model by the association of real-time nonlinear impacts that caused by neighboring arcs’ traffic patterns with the historical traffic behaviors. The AMPRFP algorithm is evaluated by prediction of the travel time of congested arcs in the urban area of Jacksonville City. Experiment results illustrate that the proposed scheme is able to significantly reduce both the relative mean error (RME) and the root-mean-squared error (RMSE) of the predicted travel time. To obtain high quality real-time traffic information, which is essential to the performance of the AMPRFP algorithm, a data clean scheme enhanced empirical learning (DCSEEL) algorithm is also introduced. This novel method investigates the correlation between distance and direction in the geometrical map, which is not considered in existing fingerprint localization methods. Specifically, empirical learning methods are applied to minimize the error that exists in the estimated distance. A direction filter is developed to clean joints that have negative influence to the localization accuracy. Synthetic experiments in urban, suburban and rural environments are designed to evaluate the performance of DCSEEL algorithm in determining the cellular probe’s position. The results show that the cellular probe’s localization accuracy can be notably improved by the DCSEEL algorithm. Additionally, a new fast correlation technique for overcoming the time efficiency problem of the existing correlation algorithm based floating car data (FCD) technique is developed. The matching process is transformed into a 1-dimensional (1-D) curve matching problem and the Fast Normalized Cross-Correlation (FNCC) algorithm is introduced to supersede the Pearson product Moment Correlation Co-efficient (PMCC) algorithm in order to achieve the real-time requirement of the FCD method. The fast correlation technique shows a significant improvement in reducing the computational cost without affecting the accuracy of the matching process.

SVR-GARCH com misturas de kernels gaussianos

Dissertação (mestrado)—Universidade de Brasília, Departamento de Administração, Programa de Pós-graduação em Administração, 2016.

Assessment of the spatial variability in Tall wheatgrass forage using LANDSAT 8 satellite imagery to delineate potential management zones

Little information is available on the degree of within-field variability of potential production of Tall wheatgrass (Thinopyrum ponticum) forage under unirrigated conditions. The aim of this study was to characterize the spatial variability of the accumulated biomass (AB) without nutritional limitations through vegetation indexes, and then use this information to determine potential management zones. A 27-×-27-m grid cell size was chosen and 84 biomass sampling areas (BSA), each 2 m(2) in size, were georeferenced. Nitrogen and phosphorus fertilizers were applied after an initial cut at 3 cm height. At 500 °C day, the AB from each sampling area, was collected and evaluated. The spatial variability of AB was estimated more accurately using the Normalized Difference Vegetation Index (NDVI), calculated from LANDSAT 8 images obtained on 24 November 2014 (NDVInov) and 10 December 2014 (NDVIdec) because the potential AB was highly associated with NDVInov and NDVIdec (r (2) = 0.85 and 0.83, respectively). These models between the potential AB data and NDVI were evaluated by root mean squared error (RMSE) and relative root mean squared error (RRMSE). This last coefficient was 12 and 15 % for NDVInov and NDVIdec, respectively. Potential AB and NDVI spatial correlation were quantified with semivariograms. The spatial dependence of AB was low. Six classes of NDVI were analyzed for comparison, and two management zones (MZ) were established with them. In order to evaluate if the NDVI method allows us to delimit MZ with different attainable yields, the AB estimated for these MZ were compared through an ANOVA test. The potential AB had significant differences among MZ. Based on these findings, it can be concluded that NDVI obtained from LANDSAT 8 images can be reliably used for creating MZ in soils under permanent pastures dominated by Tall wheatgrass.

DISTRIBUTION FUNCTIONS, MEAN SQUARED ERRORS, AND CONFIDENCE LIMITS FOR RIDGE REGRESSION ESTIMATORS

A large number of ridge regression estimators have been proposed and used with little knowledge of their true distributions. Because of this lack of knowledge, these estimators cannot be used to test hypotheses or to form confidence intervals.^ This paper presents a basic technique for deriving the exact distribution functions for a class of generalized ridge estimators. The technique is applied to five prominent generalized ridge estimators. Graphs of the resulting distribution functions are presented. The actual behavior of these estimators is found to be considerably different than the behavior which is generally assumed for ridge estimators.^ This paper also uses the derived distributions to examine the mean squared error properties of the estimators. A technique for developing confidence intervals based on the generalized ridge estimators is also presented. ^

Modelos digitales de elevación generados por captura directa e indirecta de datos fuente : evaluación de su calidad

La información básica sobre el relieve de una cuenca hidrográfica, mediante metodologías analítico-descriptivas, permite a quienes evalúan proyectos relacionados con el uso de los recursos naturales, tales como el manejo integrado de cuencas, estudios sobre impacto ambiental, degradación de suelos, deforestación, conservación de los recursos hídricos, entre otros, contar para su análisis con los parámetros físicos necesarios. Estos procesos mencionados tienen un fuerte componente espacial y el empleo de Sistemas de Información Geográfica (SIG) son de suma utilidad, siendo los Modelos Digitales de Elevación (DEM) y sus derivados un componente relevante de esta base de datos. Los productos derivados de estos modelos, como pendiente, orientación o curvatura, resultarán tan precisos como el DEM usado para derivarlos. Por otra parte, es fundamental maximizar la habilidad del modelo para representar las variaciones del terreno; para ello se debe seleccionar una adecuada resolución (grilla) de acuerdo con los datos disponibles para su generación. En este trabajo se evalúa la calidad altimétrica de seis DEMs generados a partir de dos sistemas diferentes de captura de datos fuente y de distintas resoluciones de grilla. Para determinar la exactitud de los DEMs habitualmente se utiliza un grupo de puntos de control considerados como "verdad de campo" que se comparan con los generados por el modelo en la misma posición geográfica. El área seleccionada para realizar el estudio está ubicada en la localidad de Arrecifes, provincia de Buenos Aires (Argentina) y tiene una superficie de aproximadamente 120 ha. Los resultados obtenidos para los dos algoritmos y para los tres tamaños de grilla analizados presentaron los siguientes resultados: el algoritmo DEM from contourn, un RMSE (Root Mean Squared Error) de ± 0,11 m (para grilla de 1 m), ± 0,11 m (para grilla de 5 m) y de ± 0,15 m (para grilla de 10 m). Para el algoritmo DEM from vector/points, un RMSE de ± 0,09 m (para grilla de 1 m), ± 0,11 m (para grilla de 5 m) y de ± 0,11 m (para grilla de 10 m). Los resultados permiten concluir que el DEM generado a partir de puntos acotados del terreno como datos fuente y con el menor tamaño de grilla es el único que satisface los valores enumerados en la bibliografía, tanto nacional como internacional, lo que lo hace apto para proyectos relacionados con recursos naturales a nivel de ecotopo (predial). El resto de los DEMs generados presentan un RMSE que permite asegurar su aptitud para la evaluación de proyectos relacionados con el uso de los recursos naturales a nivel de unidad de paisaje (conjunto de ecotopos).