Structure of the salivary glands of the unfed male tick Amblyomma cajennense (Fabricius) (Acarina: Ixodidae)

Acini in the salivary glands of unfed male Amblyomma cajennense of different ages, were studied. The salivary glands consist of one agranular and three granular acini types. The agranular acini are directly attached to the medial and anterior portion of the main salivary duct, and to some branches of the secondary ducts. A large, clear, central cell occupies the centre and this cell is in contact with the acinar lumen. There is no valve to the lumen. Granular acini consist of approximately six to fourteen cells (type II acini) or eight to thirteen (type III acini). The type II acini have three types of granular cells ("a", "b" and "c") and a valve: the type III acini have three types of granular cells ("d", "e" and "f" and a valve.

Development of Colombian isolates of Leishmania (Viannia) panamensis, Le. (V.) guyanensis and Le. (V.) braziliensis in the sandfly Lutzomyia intermedia (Lutz & Neiva, 1912) under experimental conditions

The development of Colombian Leishmania species of the subgenus Viannia in Lutzomyia intermedia was similar to that observed with Brazilian Le. (V.) braziliensis: colonization of the pylorus by paramastigotes; promastigotes in the midgut and massive infection of stomodeal valve. Difference was observed in the number of paramastigotes colonizing the pylorus, which was smaller in Colombian Leishmania species than Brazilian Le. braziliensis.

Gundlachia dutrae: n. sp. from northwest Brazil (Mollusca: Basommatophora: Ancylidae)

A new species of Gundlachia, Gundlachia dutrae is described from northwest Brazil. It is distinguishable from other congenerie species by characteristics of the shell, radula and internal organs. Shell relatively high. Aperture near-circular; periostracum dark brown without periostracal hairs. Apex slightly inclined to the right, projected but not hooked, with an apical depression surrounted by a sculpture of well-marked irregular punctations. Shell surface with prominent radial sculpture. No septate specimens were observed. Ratios (n= 59): shell width/shell lenght = 0,66- 0,79 (mean 0,73); shell height/shell length = 0,32- 0,45 ( mean 0,37); shell height/shell width = 0,43- 0,63 (mean 0,51). Body of normal ancylid type; mantle pigmentation dark brown or black, concentrated along the mantle collar. The dorsal surface of the right anterior muscle is elongated and medially constricted. The left anterior and the posterior muscles are almost elliptical. Adhesive area is V-shaped. Pseudobranch unpigmented bearing a very small and thin dorsal lobe. Ovotestis with more than 25 unbranched diverticula. Ovispermiduct with seminal vesicle rather developed. Elongated nidamental gland continous with the glandular wall of the uterus. Nidamental gland appendix ending into a bulbous swelling Spermathecal body almost rounded. Well-developed prostate with five long diverticula. Ejaculatory complex with long glandular flagellum, without a penis or true ultra-penis. "Penis sheath" developed. "Ultra-penis" projected as a tube inside the lumem of prepuce, with a slit between "ultra-penis" and "penis sheath". Rachidian tooth tetracuspid, with two median cusps assymmetrical and aculeated. Lateral teeth tricuspid, with a reduced endocon and a prominent mesocon. A well marked gap occurs between meso and ectocon. Marginal teeth similar to lateral ones. Jaw T-shaped, with about 28 dorsal plates.

Anatomia e Histologia das Glândulas Salivares nos Triatomíneos

Histological studies upon the salivary glands of ten species of triatomine bugs were performed looking for their number and structural organization in different genera. It was possible to evaluate the celular epithelium type of each gland, as well as the merocrine and apocrine secretions of the glands. Secretion run until the hilo and after to salivary pump and hypofaringe. The glandular components, D1, D2 and D3 are always present in the Triatoma, Panstrongylus and Diptelogaster but in Rhodnius there are only the first two pairs of glands. The salivary channels and the hilo are analyzed by histology. The whole pair D3 has a clear valve that regularizes the exit of the secretions to the hilo. According to the genus the valves appear in different locations. They have low and dense epithelium, and their nucleus are rich in chromatin. The secondary channels leaving these valves, are very different, with clear chitinous ringer, low level of chromatin in the nucleus and homogeneous cytoplasm.

Nematodes of elasmobranch fishes from the southern coast of Brazil

New records for nematode species recovered from elasmobranch fishes in Brazil are established and new systematical arrangements proposed. Parascarophis sphyrnae Campana-Rouget, 1955 from the spiral valve of Sphyrna zygaena is referred for the first time in South America as a new host record. Procamallanus (S.) pereirai Annereaux, 1946, from the spiral valve of Raja castelnaui is reported parasitizing an elasmobranch host. Nematode larvae of the genera Anisakis, Contracaecum, Pseudoterranova and Raphidascaris are listed from the stomach and spiral valves of several hosts. Anisakidae larvae previously referred in Brazil in the genus Phocanema should be reallocated in Pseudoterranova. Nematodes of the genera Anisakis, Contracaecum, Pseudoterranova and Raphidascaris are reported for the first time parasitizing elasmobranchs in Brazil.

Digenea and acanthocephala of elasmobranch fishes from the southern coast of Brazil

New records for helminth species recovered from elasmobranch fishes in Brazil are established. Digenean and acanthocephalan parasites of elasmobranch fishes are reported from the southern coast of Brazil: Otodistomum veliporum (Creplin, 1837) Stafford, 1904 (Digenea: Azygiidae) in the stomach and spiral valve of Dipturus trachydermus and in the spiral valve of Squatina sp. Cystacanths and juveniles of the acanthocephalans Corynosoma australe Johnston, 1937 and Corynosoma sp., in the spiral valve of Squatina sp., Galeorhinus galeus and Hexanchus griseus and in the stomach of Squalus megalops; a juvenile of Gorgorhynchus sp., in the spiral valve of Sphyrna zygaena. Dipturus trachydermus and Squatina sp. are new host records for O. veliporum. Digeneans and acanthocephalans are reported for the first time parasitizing elasmobranch fishes in Brazil.

Single and concomitant experimental infectionsby Endotrypanum spp. and Leishmania (Viannia) guyanensis (Kinetoplastida: Trypanosomatidae) in the Neotropical sand fly Lutzomyia longipalpis (Diptera: Psychodidae)

Lutzomyia longipalpis females received single and mixed infections with Endotrypanum and Leishmania. Two biological parameters were analyzed: the percentage of infected females and the distribution of flagellates in the gut of the females. The principal comparisons were performed between (1) two strains of Endotrypanum, (2) cloned versus primary sample of one strain of Endotrypanum, (3) Endotrypanum versus Leishmania guyanensis, and (4) the pattern of flagellates behaviour by optical microscopy in females with single or mixed infection versus the identification of parasites isolated from digestive tracts by isoenzyme electrophoresis. Flagellates of Endotrypanum showed distinct patterns of infection suggesting that there is variation between and within strains. The distribution of Endotrypanum and L. guyanensis differed significantly in relation to the colonization of the stomodeal valve. In co-infection with L. guyanensis, a large number of flagellates were seen to be plentifully infecting the stomodeal valve in significantly more specimens than in females infected by Endotrypanum only. However, the electrophoretic profiles of isoenzymes of parasites recovered from all co-infected specimens corresponded to Endotrypanum. This suggests that the mere correlation sand fly infection-biochemical analysis of isolates may induce parasitological incorrect consideration.

Fine structure of Henneguya hemiodopsis sp. n. (Myxozoa), a parasite of the gills of the Brazilian teleostean fish Hemiodopsis microlepes (Hemiodontidae)

A fish-infecting myxosporean, Henneguya hemiodopsis sp. n., found infecting the gills of Hemiodopsis microlepis and collected from the Poty River near the city of Teresina, Brazil, was described based on ultrastructural studies. The parasite occurred within large whitish polysporic plasmodia (up to 200 μm in diameter) containing asynchronous developmental sporogonic stages, mainly mature spores. The spores measured 19.7 ± 0.9 μm in total length (n = 30) and the ellipsoidal spore body was 10.8 ± 0.5 μm long, 3.3 ± 0.4 μm wide and 2.5 ± 0.5 μm thick. The spores were composed of two equal shell valves adhering together along the straight suture line, with each valve having equal-sized caudal tapering tails measuring 8.7 ± 0.6 μm in length. The spores were surrounded by a thin anastomosed network of microfibrils, more evident on the tails. There were two symmetric elongated bottle-like polar capsules 3.5 ± 0.3 μm long and 1.0 ± 0.2 μm wide, each with a polar filament with five to six coils. Given the morphological and ultrastructural differences from previously described parasites and the specificity of the host species, we propose a new species, named H. hemiodopsis sp. n.

Utilização de uma interface do tipo "particle beam" para a obtenção de espectros de massas de compostos pouco voláteis em solução

Due to source contamination and wearing of instrument components problems caused by the direct insertion probe technique, a new way of introduction of low volatile compounds into mass spectrometer was tested. This new scheme comprises the introduction of the low volatile compounds solutions via a six port valve connected to a particle beam interface. Solutions of isatin were injected into this system and the best results were obtained with CH2Cl2, CH3OH and CH3CN. The solution inlet system has shown to be advantageous over the conventional way of direct insertion probe introduction.

Automatização de um destilador d'água

A simple and inexpensive device to automate a water distilling apparatus is shown. It is composed by a magnetic floater placed in the water reservoir and a level control unit, which acts over the heating element circuit. In order to provide water saving, an electromagnetic valve is inserted in the water supply inlet. Some suggestions for the adaptation to other types of equipment are also offered.

Injetor multicanal com válvulas de estrangulamento para análise em fluxo

An important component for the automation of flow injection analysis (FIA) systems is the sample injection valve. A simple and inexpensive commutator with 16 pinch valves (8 normally open and 8 closed) was developed and configured as a multichannel injection valve. It is activated by a single solenoid of 3 Kgf, powered by a pulsed driver circuit, controlled by a microcomputer or a switch. FIA with spectrophometric detection of potassium dichromate solution was used for the evaluation of the new injection valve and its comparison with other valves, for sample loops of 50, 100, 200, 300 and 500 muL. The repeatability was favorable (RSD 1.0% for 15 injections at each loop volume) compared to a manual injector, an electropneumatic injector and an injector configured with three mini solenoid valves (RSD 1.1, 1.3 and 1.0%, respectively, for15 injections at each loop volume).

Propulsor pneumático versátil e isento de pulsação para sistemas de análise em fluxo

Aquarium air pumps are proposed and evaluated as pneumatic liquid propulsion devices for flow injection and continuos flow analysis (FIA and CFA) systems. This kind of pump is widely available at a very low cost and it can sustain a pressure around of 4 psi (0.28 bar) indefinitely. By applying this air pressure onto a solution contained in a reservoir flask, it is possible to reach flow rates of up to 12.5 mL min-1 for circuits comprising reactors, made from 0.8 i.d. tubing with a length of 100 cm. The precise adjustment of flow rate below the maximum one can be made with a simplified needle valve or inserting in series a short length of capillary tube. The absence of flow pulsation is a definite advantage in comparison with peristaltic pumps, especially when amperometric detection is elected, as confirmed experimentally in FIA and CF applications.

Módulo eletrônico de controle para válvulas solenóides

This technical note describes a new and simple electronic circuit for driving solenoid valves. The circuit is based on a single integrated circuit DRV103, which is able to drive resistive or inductive loads up to 1.5 A. Switching of 12-V loads can be controlled by TTLlevel signals in two distinct steps. Initially, 12 V is applied during 110 ms, followed by 4.2 V RMS until the end of the activation TTL pulse. This mode of operation is particularly suitable to drive solenoids, because it requires a higher voltage to start and a lower maintenance voltage. By using this circuit, power consumption and heating are reduced and the solenoid lifetime is enhanced. Moreover, this circuit is specially appropriated to build computercontrolled solenoid valves systems.

Acoplamento de cela de difusão gasosa a sistema de análise por injeção seqüencial visando a determinação espectrofotométrica de sulfeto

A new configuration for coupling a gas diffusion cell to a sequential injection system is presented. The matrix exchange is made without the need for additional rotary injection valves or peristaltic pumps, keeping the original mechanical components of the sequential injection apparatus: one syringe pump (or peristaltic pump) and one selection valve. The system was tested constructing analytical curves for sulfide exploring the formation of the methylene blue dye. The proposed method has a detection limit of 60 µg L-1 S2-, with a linear dynamic range between 0.10 and 4.0 mg L-1 S2- concentrations, with a sampling frequency of 20 h-1.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.