Hardcopy quality parameters to ensure structures detection at digital mammography

Objective To develop procedures to ensure consistency of printing quality of digital images, by means of hardcopy quantitative analysis based on a standard image. Materials and Methods Characteristics of mammography DI-ML and general purpose DI-HL films were studied through the QC-Test utilizing different processing techniques in a FujiFilm®-DryPix4000 printer. A software was developed for sensitometric evaluation, generating a digital image including a gray scale and a bar pattern to evaluate contrast and spatial resolution. Results Mammography films showed maximum optical density of 4.11 and general purpose films, 3.22. The digital image was developed with a 33-step wedge scale and a high-contrast bar pattern (1 to 30 lp/cm) for spatial resolution evaluation. Conclusion Mammographic films presented higher values for maximum optical density and contrast resolution as compared with general purpose films. The utilized digital processing technique could only change the image pixels matrix values and did not affect the printing standard. The proposed digital image standard allows greater control of the relationship between pixels values and optical density obtained in the analysis of films quality and printing systems.

Reliability of digital panoramic radiography in the diagnosis of carotid artery calcifications

Objective The present study evaluated the reliability of digital panoramic radiography in the diagnosis of carotid artery calcifications. Materials and Methods Thirty-five patients under high-risk for development of carotid artery calcifications who had digital panoramic radiography were referred to undergo ultrasonography. Thus, 70 arteries were assessed by both methods. The main parameters utilized to evaluate the panoramic radiography reliability in the diagnosis of carotid artery calcifications were accuracy, sensitivity, specificity and positive predictive value of this method as compared with ultrasonography. Additionally, the McNemar's test was utilized to verify whether there was a statistically significant difference between digital panoramic radiography and ultrasonography. Results Ultrasonography demonstrated carotid artery calcifications in 17 (48.57%) patients. Such individuals presented with a total of 29 (41.43%) carotid arteries affected by calcification. Radiography was accurate in 71.43% (n = 50) of cases evaluated. The degree of sensitivity of this method was 37.93%, specificity of 95.12% and positive predictive value of 84.61%. A statistically significant difference (p < 0.001) was observed between the methods evaluated in their capacity to diagnose carotid artery calcifications. Conclusion Digital panoramic radiography should not be indicated as a method of choice in the investigation of carotid artery calcifications.

Monte Carlo derivation of filtered tungsten anode X-ray spectra for dose computation in digital mammography

Abstract Objective: Derive filtered tungsten X-ray spectra used in digital mammography systems by means of Monte Carlo simulations. Materials and Methods: Filtered spectra for rhodium filter were obtained for tube potentials between 26 and 32 kV. The half-value layer (HVL) of simulated filtered spectra were compared with those obtained experimentally with a solid state detector Unfors model 8202031-H Xi R/F & MAM Detector Platinum and 8201023-C Xi Base unit Platinum Plus w mAs in a Hologic Selenia Dimensions system using a direct radiography mode. Results: Calculated HVL values showed good agreement as compared with those obtained experimentally. The greatest relative difference between the Monte Carlo calculated HVL values and experimental HVL values was 4%. Conclusion: The results show that the filtered tungsten anode X-ray spectra and the EGSnrc Monte Carlo code can be used for mean glandular dose determination in mammography.

Do termoscópio ao termômetro digital: quatro séculos de termometria

This work describes the evolution of temperature measurement in the last four centuries using thermometers based on the thermal expansion of liquids such as ethyl alcohol and mercury. The concept of temperature was strongly dependent on the researcher and there was no systematic temperature scale for universal use. The precursor of the common thermometer was the thermoscope, probably invented at the end of the XVIth century. In the XVIIIth century the instrument was greatly improved and several thermometric scales were proposed some of which have been in use until now. These scales were based on arbitrary points. Mercury and ethyl alcohol were the most employed thermometric fluids. In the XIXth century, the concept of absolute zero was a great advance in this field. The most important contribution during the XXth century was the establishment of international temperature scales. The design of the thermometer has been essentially the same along the last 300 years, but many models were proposed for industrial and research purposes. Its association with the densimeter was of great importance for control of industrial chemical processes and also for teaching purposes in the past. Nowadays, there is a clear tendency to replace mercury-based thermometers by electronic digital models. Thermochemistry is the natural relationship between temperature and chemistry.

De Svante Arrhenius ao peagâmetro digital: 100 anos de medida de acidez

This work describes the establishment of the concept of pH and the evolution of its measurement. The origin of the pH definition can be found in the development of the chemistry of aqueous solutions during the XIXth century. The electrolytic dissociation theory by Svante Arrhenius played a central role. After the proposal of the pH scale by Sörensen, many years were necessary for the acceptance of this new parameter among chemists in general. Its importance was first recognized in biochemistry and related areas. Twenty years after, its importance had been recognized in many industrial and laboratorial practices. The previous methods were based on colorimetric and electrometric methods, but both suffered from many problems. Acceptance of pH in Chemistry was only possible after the development of experimental trustable measurements. The invention of the pH meter was the primordial step.

Plantas medicinais: fatores de influência no conteúdo de metabólitos secundários

Since secondary metabolites represent a chemical interface between plants and surrounding environment, their syntheses are frequently affected by environmental conditions. Thus, variations in the total content and/or of the relative proportions of secondary metabolites in plants can take place. We review the main environmental factors that can streamline or alter the production or concentration of secondary metabolites in plants. How seasonality, circadian rhythm, developmental stage and age, temperature, water availability, UV radiation, soil nutrients, altitude, atmospheric composition and tissue damage influence secondary metabolism are discussed.

Conteúdo lipídico e composição de ácidos graxos de microalgas expostas aos gases CO2, SO2 e NO

The objective of the present work was to verify the lipid content and the fatty acid composition of the microalgae Spirulina sp., Scenedesmus obliquus, Synechococcus nidulans and Chlorella vulgaris cultivated in a medium containing CO2, SO2 and NO. The microalga Scenedesmus obliquus presented the highest lipid content (6.18%). For the other microalgae the lipid content ranged from 4.56 to 5.97%. The major monounsaturated fatty acids content was 66.01% for S. obliquus. The PUFA were obtained in major amount by the microalgae Spirulina sp. (29.37%) and S. nidulans (29.54%). The palmitoleic acid was in larger amount, with 41.02% concentration (Spirulina sp.).

INFLUÊNCIA DO CONTEÚDO DE XILANAS NA BRANQUEABILIDADE, PROPRIEDADES HIGROSCÓPICAS, FISICO-MECÂNICAS E ÓPTICA DE POLPAS BRANQUEADAS DE EUCALIPTO

Bleached eucalypt kraft pulps are widely used in print and writing (P&W) and tissue paper manufacture. Among the quality requirements of pulp for these papers, xylan content has been controversial. The objective of this study was to evaluate the influence of xylan content on bleachability, hygroscopic, physic-mechanical and optical properties of the pulp. In this study industrial unbleached eucalyptus kraft pulp (15.6% xylans) treated with different NaOH loads to change its xylan content was used. Subsequently, pulps were bleached by the ODHT(EP)D sequence to achieve 90% ISO of brightness, then refined and submitted to hygroscopic, physicomechanical and optical tests. NaOH treatments decreased the xylan content to 14.5-5.9% using NaOH loads of 10-70 g L-1. Pulp bleachability was not significantly affected by xylan content decrease. The decrease in xylan content negatively affected the water retention value and Klemm capillarity of the pulp, while water absorption capacity was positively affected. Tensile and tear index were negatively influenced by the reduction in xylan content, whereas bulk and light scattering coefficient increased.

ANÁLISE COMPARATIVA DO CONTEÚDO EM ESTEROIDES LIVRES DE DIFERENTES ÓLEOS, GORDURAS E BIODIESEIS POR CROMATOGRAFIA GASOSA

In this study, the percentage content of free steroid in oils, fats and biodiesel was analyzed. For this, the saponification reaction on a microscale was used, and this procedure for extraction of unsaponifiable fraction was studied in several experimental steps. After the process of saponification, the unsaponifiable fraction was analyzed by gas chromatography with flame ionization detector, where all steroids present in each oil, fat and biodiesel were identified and their contents determined and compared to their respective biodiesel. A reduction in unsaponifiable fraction of each oil and fat and its biodiesel was noted, as well as a reduction in the content of free steroids. The results showed that, compared to the sedimentation problem of steroids in biodiesel, some raw materials, such as chicken fat and babassu oil may be promising because they have low content and high reduction percentages of steroids when converted to biodiesel.

Conteúdo não conceitual, holismo e normatividade

A atribuição de conteúdos não conceituais serve à explicação da riqueza da experiência. No entanto, a integração de estados perceptivos, através do tempo e entre diferentes modalidades, necessários à constituição da experiência, parece dever apelar a um vocabulário conceitualista, ao qual se aplicam princípios de racionalidade. Procuro neste artigo contestar esta segunda tese: conteúdos não conceituais são parte da experiência humana, que é organizada de acordo com princípios racionais. A integração da experiência não depende de um vocabulário conceitualista, no entanto, princípios de racionalidade aplicam-se à integração própria à experiência humana. Conteúdos não conceituais são parte da experiência e a eles se aplicam princípios de racionalidade, mesmo se só podem ser atribuídos em um determinado curso de ações e identificados por meio de mecanismos demonstrativos, precisamente porque não são recrutados em conceitos.

Conteúdo e exportação de micronutrientes em acácia-negra (Acacia Mearnsii De Wild.) procedência batemans bay (Austrália)

O objetivo do presente trabalho foi estimar o conteúdo e a exportação de micronutrientes (Mn, B, Cu, Zn e Fe) e o Na nos diferentes componentes de árvores de um povoamento de acácia-negra (Acacia mearnsii De Wild.), procedência australiana Batemans Bay, com 2,4 anos de idade, em Butiá-RS (Brasil). A biomassa total estimada foi de 36.155 kg/ha, apresentando distribuição de 46,0, 20,0, 19,5, 12,0 e 3,0%, na madeira do lenho, nas folhas, nos galhos vivos, na casca e nos galhos mortos, respectivamente. A proporção de micronutrientes acumulados na biomassa dos componentes da árvore foram 43,76% nas folhas, 26,94% na madeira do tronco, 19,56% nos galhos vivos, 7,21% na casca e 2,54% nos galhos mortos. A quantidade estimada de micronutrientes contidos na biomassa acima do solo foi 10,4 kg/ha, acumulados da seguinte forma: Na (58,84%), Fe (21,79%), Zn (9,16%), B (4,09%), Mn (4,59%) e Cu (1,54%). A casca e a madeira do lenho acumulou Na (21,47%), Fe (6,71%), Mn (2,11%), Zn (1,66%), B (1,58%) e Cu (0,63%). A copa (folhas e galhos vivos e mortos) acumularam Na (37,36%), Fe (15,07%), Zn (7,49%), B (2,53%), Mn (2,48%) e Cu (0,91%). A exploração intensiva de áreas com a procedência Batemans Bay gera suspeitas de possíveis ocorrências de deficiências nutricionais de Na nas rotações futuras, tornando necessário o emprego de fertilizantes para manter a produtividade do sítio.

Influência de doses crescentes de chumbo sobre o teor e o conteúdo de nutrientes e Pb em mudas de ipê-roxo (Tabebuia impetiginosa (Mart.) Standl.)

O efeito da aplicação de chumbo sobre o teor e o conteúdo de nutrientes e Pb na raiz, no caule e nas folhas de mudas de ipê-roxo (Tabebuia impetiginosa (Mart.) Standl.) foi estudado em um experimento realizado em casa de vegetação do Departamento de Ciência do Solo da Universidade Federal de Lavras. As mudas foram cultivadas em solução nutritiva de Clark e submetidas a doses crescentes de Pb: 0, 48, 96, 192 e 288 mimol/l. O experimento foi conduzido em delineamento estatístico de blocos ao acaso, e após 60 dias de exposição ao metal pesado foram feitas avaliações do teor e do conteúdo de macro, micronutrientes e chumbo na matéria seca de raiz, caule e folha. Os resultados mostraram que a aplicação de chumbo aumentou o teor de P e praticamente não afetou os teores de S, Ca e Mg nas mudas. De modo geral os teores de Cu, Fe e Mn sofreram redução, o teor de Zn não foi afetado, enquanto o conteúdo de macro e de micronutrientes sofreu redução. O teor de Pb na matéria seca de raiz, caule e folha aumentou com as doses aplicadas, principalmente na raiz, e se mostrou pouco móvel nas plantas analisadas.