Desenvolvimento do curso de gerenciamento em enfermagem on-line: experiência exitosa entre Brasil e Portugal

RESUMO Objetivo Descrever a experiência no planejamento e desenvolvimento de um Curso de Atualização On-Line em Gerenciamento em Enfermagem destinado a enfermeiros nos contextos Brasil e Portugal. Método O desenho instrucional do Curso fundamentou-se na Teoria da Aprendizagem Significativa, na Andragogia e na Metodologia Dialética, valorizando a interação entre os atores e privilegiando os cenários de prática e a aplicação dos conceitos abordados. Resultados O Curso está estruturado em nove unidades teóricas, quatro estudos de caso e prova dissertativa. Foi avaliado positivamente pelos participantes, os quais referiram oportunidades de aquisição de novos conhecimentos; interação e intercâmbio de experiência; motivação em estudar os temas e autoaprendizagem. Conclusão Espera-se que a experiência descrita estimule a proposição de novos cursos e programas na modalidade de Educação a Distância, incrementando os processos de ensino e de aprendizagem para subsidiar análises futuras do seu impacto no desenvolvimento e no aprimoramento de competências gerenciais em enfermagem.

Caste polymorphism of apterous line of the Neotropical termite Nasutitermes corniger (Motschulsky) (Isoptera, Termitidae)

Termite societies are structured by individuals that can be grouped into castes and instars. The development of these instars in most species occurs in irregular patterns and sometimes is distinguished subcastes in physical systems that originate polymorphic soldiers and workers. In this study, we characterized the morphological diversity of castes of apterous in Nasutitermes corniger. We collected four colonies of N. corniger, one every three months between May 2011 and February 2012. Individuals of the nest were separated into groups: larval stages, workers and presoldiers and soldiers. A morphometric analysis was performed on individuals from each group based on head width, metatibia, antenna, and thorax length. The data were submitted to discriminant analysis to confirm different morphological types inside these groups. The apterous line of N. corniger is composed of one first larval instar and two second larval instar. The workers caste has two lines of development with four instars in a larger line and three instars in a lower line. Two morphological types were identified in presoldiers and soldiers. The pattern of castes was similar to other species of the genus, in which bifurcation into two lines of workers, one smaller and one larger occurs after the first molt.

Dicionários disponíveis on-line para aprendizes de inglês: estruturação e recursos

O artigo descreve a estrutura e as formas de acesso características dos dicionários eletrônicos do tipo on-line disponíveis ao aprendiz de língua inglesa, comparando o conteúdo e os recursos de dois dicionários monolíngues e dois dicionários bilíngües - o Cambridge Advanced Learner's Dictionary (CALD, 2009), o Merriam-Webster Learner's Dictionary (MWLD, 2009), o Reverso Dictionary English/Portuguese (RDEP, 2008) e o Wiktionary Inglês/Português (WIP, 2009). Discute-se a funcionalidade desses instrumentos em relação às demandas do aprendiz.

Lipoxygenase activities during development of root and nodule of soybean

The objective of this work was to evaluate root and nodule soybean lipoxygenases in Doko cultivar and in a near isogenic line lacking seed lipoxygenases, inoculated and uninoculated with Bradyrhizobium elkanii. The lipoxygenase activities from roots collected at 3, 5, 9, 13, 18 and 28 days post-inoculation and from nodules collected at 13, 18 and 28 days post-inoculation were measured. The pH-activity profiles from root and nodules suggested that the lipoxygenases pool expressed in these organs from Doko cultivar and triple-null near isogenic lines are similar. The root lipoxygenase activity of Doko and triple-null lines, inoculated and uninoculated, reduced over time. The highest lipoxygenase activity observed at the beginning of root formation suggests the involvement of this enzyme in growth and development of this organ. However, for nodules an expressive increase of lipoxygenase activity was noticed 28 days post-inoculation. Root and nodule showed, at least, two mobility groups for lipoxygenases in immunoblottings, with approximately 94 and 97 kDa.

FITOTOXICIDADE DE FUNGICIDAS, ACARICIDAS E INSETICIDAS, SOBRE O MAMOEIRO (Carica papaya L.) CULTIVAR SUNRISE SOLO IMPROVED LINE 72/12 EM CONDIÇÕES DE CAMPO

A presente pesquisa teve como objetivo estudar os efeitos fitotóxicos de fungicidas, acaricidas e inseticidas e algumas associações entre eles, em plantas de mamoeiros (Carica papaya L.) cv. Sunrise Solo Improved Line 72/12, em condições de campo, no município de São Mateus -- ES, pertencente à maior região produtora do Estado. O experimento foi arranjado em delineamento de blocos casualizados, com 4 repetições e 03 plantas úteis por parcela. Foram utilizados os seguintes produtos, com as respectivas doses, para cada 100 L de água: chlorothalonil (Daconil PM-200g); mancozeb (Dithane PM -- 200g); oxicloreto de cobre (Reconil -- 400g); thiabendazole (Tecto 450 -- 100ml); dicofol + tetradifon (Carbax -- 200ml); triazophós (Hostathion 400 BR -- 150ml); óxido de fenbutatina (Torque 500 SC -- 60ml); e abamectin (Vertimec 18 CE -- 50ml): Analisou-se a fitotoxicidade dos produtos testados, em relação à altura da planta, nº de folhas, número de flores e frutos ; diâmetro do caule e queimaduras ou injúrias foliares. As datas das avaliações foram: 01 dia antes das pulverizações, 15 dias e 30 dias após as mesmas. Os fungicidas Daconil BR, Reconil e Tecto 450; o fungicida acaricida Dithane PM; os acaricidas Carbax e Torque 500 SC; e o inseticida-acaricida Vertimec 18 CE, aplicados isoladamente, não afetaram o crescimento e a produção das plantas, nem causaram injúrias nas folhas das mesmas. A associação de fungicidas e fungicida-acaricida, com os acaricidas, ou inseticida-acaricida, não mostrou nenhum efeito fitotóxico sobre os parâmetros de crescimento avaliados, nem causaram queimaduras ou injúrias foliares.

Fitotoxicidade de fungicidas, acaricidas e inseticidas sobre o mamoeiro (Carica papaya L.) cultivar sunrise solo improved line 72/12

Estudaram-se os efeitos fitotóxicos de fungicidas, acaricidas e inseticidas e algumas associações entre eles, em plantas de mamoeiros (Carica papaya L.) cv. Sunrise Solo Improved Line 72/12, em condições de verão, no município de São Mateus - ES, localizado na região produtora do Estado. O experimento foi arranjado em delineamento de blocos casualizados, com 4 repetições e 03 plantas úteis por parcela experimental. Foram utilizados os seguintes produtos, com as respectivas doses, para cada 100 l de água: abamectin (Vertimec 18 CE - 50 ml); dicofol + tetradiphon (Carbax - 200 ml), fenbutatin oxide (Torque 500 SC - 60 ml); mancozeb (Dithane PM - 200g); oxicloreto de cobre (Reconil - 400g) e thiabendazole (Tecto 450 - 100ml). Analisou-se a fitotoxicidade dos produtos em relação à altura da planta, nº de folhas, número de flores e frutos ; diâmetro do caule e queimaduras ou injúrias foliares. As medições e contagens foram feitas um dia antes das pulverizações, 15 e 30 dias após. Constatou-se que o Vertimec 18 CE, associado ao Reconil ou ao Tecto 450, ocasionou leves injúrias foliares, detectadas aos 15 dias após as pulverizações, que se tornaram praticamente imperceptíveis, aos 30 dias após as pulverizações; e que Dithane PM, Reconil, Tecto 450, Carbax, Torque 500 SC, Dithane PM + Carbax, Dithane PM + Torque 500 SC, Dithane PM + Vertimec 18 CE, Reconil + Carbax, Reconil + Torque 500 SC, Tecto 450 + Carbax e, Tecto 450 + + Torque 500 SC não interferiram nos parâmetros de desenvolvimento e de produção estudados, bem como não causaram injúrias ou queimaduras nas folhas dos mamoeiros.

Automated flow-injection method for cadmium determination with pre-concentration and reagent preparation on-line

The spectrophotometric determination of Cd(II) using a flow injection system provided with a solid-phase reactor for cadmium preconcentration and on-line reagent preparation, is described. It is based on the formation of a dithizone-Cd complex in basic medium. The calibration curve is linear between 6 and 300 µg L-1 Cd(II), with a detection limit of 5.4 µg L-1, an RSD of 3.7% (10 replicates in duplicate) and a sample frequency of 11.4 h-1. The proposed method was satisfactorily applied to the determination of Cd(II) in surface, well and drinking waters.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.

Determination of etoricoxib in human plasma using automated on-line solid-phase extraction coupled with LC-APCI/MS/MS

A liquid chromatography-tandem mass spectrometry method with atmospheric pressure chemical ionization (LC-APCI/MS/MS) was validated for the determination of etoricoxib in human plasma using antipyrin as internal standard, followed by on-line solid-phase extraction. The method was performed on a Luna C18 column and the mobile phase consisted of acetonitrile:water (95:5, v/v)/ammonium acetate (pH 4.0; 10 mM), run at a flow rate of 0.6 mL/min. The method was linear in the range of 1-5000 ng/mL (r²>0.99). The lower limit of quantitation was 1 ng/mL. The recoveries were within 93.72-96.18%. Moreover, method validation demonstrated acceptable results for the precision, accuracy and stability studies.

On-line preconcentration system using a microcolumn packed with Alizarin Red S-modified alumina for zinc determination by flame atomic absorption spectrometry

A simple and sensitive on-line flow injection system for determination of zinc with FAAS has been described. The method is based on the separation and preconcentration of zinc on a microcolumn of immobilized Alizarin Red S on alumina. The adsorbed analyte is then eluted with 250 µL of nitric acid (1 mol L-1) and is transported to flame atomic absorption spectrometer for quantification. The effect of pH, sample and eluent flow rates and presence of various cations and anions on the retention of zinc was investigated. The sorption of zinc was quantitative in the pH range of 5.5-8.5. For a sample volume of 25 mL an enrichment factor of 144 and a detection limit (3S) of 0.2 µg L-1 was obtained. The precision (RSD, n=7) was 3.0% at the 20 µg L-1 level. The developed system was successfully applied to the determination of zinc in water samples, hair, urine and saliva.

Emprego de sílica gel organicamente modificada e impressa ionicamente para pré-concentração seletiva on-line de íons cobre

The present work purposes the preparation of a silica gel sorbent organically modified with 2-aminoethyl-3-aminobutylmethyldimethoxysilane (AAMDMS) and imprinted with Cu2+ ions by means surface imprinting technique and its use for selective on-line sorbent preconcentration of Cu2+ ions with further UV-VIS spectrophotometric determination by flow injection analysis. The Cu2+-imprinted silica gel, when compared with non imprinted silica gel and silica gel, showed from the binary mixture of Cu2+/Ni2+ relative selectivity coefficient (k') of 6.84 and 5.43 and 6.64 and 19.83 for the mixture Cu2+/Pb2+, thus demonstrating higher selectivity of Cu2+-imprinted silica gel towards Cu2+ ions. Under optimized condition, the on-line preconcentration method provided detection limit of 3.4 μg L-1 and linear range ranging from 30.0 up to 300.0 μg L-1 (r = 0.995). The accuracy of method was successfully assessed by analyzing different kind of spiked water samples with recovery values ranging from 92.2 up to 103.0%.

Um sistema microcontrolado para o monitoramento on-line, in situ e remoto de pH, condutividade e temperatura de águas

A portable microcontrolled system is proposed to monitor conductivity, temperature and pH in on-line, in situ and remote way from a water reservoir faraway 200 m. The system comprises two modules: one for data reception (located in laboratory) and another for data acquisition/transmission (located near water reservoir). It uses a microcontroller and a transceiver to remote data transmission/reception by radio frequency. Variations of water parameters were simultaneously monitored without interruption during a period of ten hours with a relative error about 4.0 %. The developed system showed simple, stable, accurate, robust and low-cost to determine parameters of water in field.

Resultados científicos do cruzeiro do "Baependi" e do "Vega" à Ilha da Trindade: contribuição para o conhecimento da plataforma insular da Ilha da Trindade

The oceanographic work realized during 10 days in the surroundings of the eruptive island of Trindade, 20º30'36" lat. S - 29º19'26" long. W, had as principal aim the determination of the insular plateau, whose knowledge was very insufficient. Thus were established some oceanographic stations and sounding lines were realized by means of an echobathymeter whose responses were initially verified with mechanical soundings obtaneid by means of a Thomson sounder. The insular plateau is very narrow and exhibits a sudden fall between the 100 and 120 m. depth line at 740 m. - 2950 m. from the coast. Its greatest depth is of 108,30 m. and its mean inclination is of 8,12%. The plateau of the island of Trindade is separated from that of the neighbouring group of Martim Yaz by great depths. The bottoms are rocky near the coast, the blocks having been produced by the rupture of the magmatic mass of the island. Further away from the coast, the size of the rocks gradually diminishes up to the fine sand thickness. In the litoral zone there are abundant tufts of living Lithothamnion with a rich associated flora and fauna, which partly covers the rocks themselves. Further off at sea, the spheres of the dead alga with its commensals are cimented together by sedimentation. The spheres are further broken up and become an integrating part of the sand. The results of the physical and chemical analyses of the sand bottoms are shown in tables 2 and 3. The coast is either of abrupt rocky walls falling down to sea level, or of shores, made of pebbles or of sand. Anyhow, there are frequently Lithothamnion terraces slightly inclinated towards the bottom (chemical analysis table 1).

Optimization of NMP extraction in 1, 3-butadiene production line

N-methylpyrrolidone is a powerful solvent for variety of chemical processes due to its vast chemical properties. It has been used in manufacturing processes of polymers, detergents, pharmaceuticals rubber and many more chemical substances. However, it creates large amount of residue in some of these processes which has to be dealt with. Many well known methods such as BASF in rubber producing units have tried to regenerate the solvent at the end of each run, however, there is still discarding of large amount of residue containing NMP, which over time, could cause environmental concerns. In this study, we have tried to optimize regeneration of the NMP extraction from butadiene production. It is shown that at higher temperatures NMP is separated from the residue with close to 90% efficiency, and the solvent residue proved to be the most effective with a 6: 1 ratio.