93 resultados para Testes de espectrofotometria de UV-Vis
Resumo:
This paper reports on a modification of the procedures originally described in the French Pharmacopoeia for the UV-visible spectrometric analysis of flavonoids, and proposes a validation of the method and its application in the determination of total flavonoids from sugarcane (Saccharum officinarum) leaves and vinasse. An analysis of precision and accuracy revealed a low relative standard deviation (< 5.0%) and a good recovery percentages (99.79 and 98.34%). A comparison of the spectrometric results against those obtained by high performance liquid chromatography (HPLC-UV) demonstrated complete compatibility between the modified French Pharmacopoeia (spectrometric) and HPLC-UV methods
Resumo:
Este trabalho descreve uma revisão a respeito do uso do ligante dietilditiofosfato de amônio em química analítica e suas potencialidades no campo da análise química espectrofotométrica (UV/VIS) e espectrométrica (AAS, ICP-AES, ICP-MS) em diferentes matrizes e meios. A discriminação de espécies químicas por meio de complexações seletivas de elementos químicos com dietilditiofosfato e a hifenação de técnicas espectroscópicas a etapas de separação como extração em fase sólida, extração líquido-líquido, extração por "cloud point", são outros assuntos abordados neste trabalho.
Resumo:
No presente trabalho, foi investigado o comportamento do extrato aquoso e alcoólico da beterraba (Beta vulgaris) como um indicador ácido-base, tendo como objetivo principal despertar o interesse pelo uso dos indicadores naturais, como alternativa didática para transmissão dos conceitos de titulação, equilíbrio químico e a lei de Lambert-Beer. Para a realização dos experimentos foram utilizadas soluções padrão de ácido clorídrico (HCl), ácido acético e hidróxido de sódio (NaOH). Inicialmente foram feitos testes para avaliar a reversibilidade do sistema, e observou-se que a coloração passa de vermelho para amarela com adição de base e retorna para vermelho com adição do ácido, sendo possível sua utilização para explicação do equilíbrio químico. As análises de espectroscopia UV-vis mostraram que os espectros de absorção molecular na região do visível, apresentam diferentes característica, dando indícios que ocorreu modificação na estrutura do indicador em meio ácido e básico. Após as análises volumétricas constatou-se que os pontos de equivalência determinados com o indicador natural tiveram concordância com os obtidos pelo método potenciométrico. Além disso, os extratos aquosos e alcoólicos da beterraba apresentam potencial didático para a explicação da lei de Lambert-Beer, sendo que no meio ácido houve uma melhor correlação comparado com o meio básico.
Resumo:
No presente trabalho, foi estudada a extração de substâncias húmicas (SH) de horizontes A de dois solos do Rio Grande do Sul (Latossolo Roxo (LR), e Brunizém vértico (B)) e de um lodo orgânico (LO), oriundo da fabricação de celulose, empregando-se dois métodos: (1) as SH foram extraídas com solução de NaOH 0,5 mol L-1, após tratamento prévio com HCl 0,5 mol L-1; (2) foi introduzida a extração com solução de pirofosfato de sódio 0,15 mol L-1 (pH 7) antes da etapa alcalina. Em cada etapa, os teores de SH, de ácidos fúlvicos (AF) e de ácidos húmicos (AH) foram determinados por métodos espectroscópicos e gravimétricos e, no método 2, os teores de Fe, Al, Si e Ca foram medidos nos extratos por absorção atômica. A composição elementar de ácidos húmicos foi determinada, e sua estrutura e características químicas foram avaliadas a partir de razões C/N, (atômicas) H/C e O/C e a partir de dados de espectroscopia Ultravioleta/Visível (UV/Vis). No LR, o método 1 extraiu maior quantidade de SH, enquanto, no método 2, a etapa com pirofosfato extraiu apenas AF. Em contrapartida, no solo B, o método 2 foi mais eficiente, verificando-se maior rendimento na etapa com pirofosfato. A partir desses resultados, infere-se que as SH, no LR, interagem principalmente por meio de reação de trocas de ligantes e de pontes de hidrogênio e, no solo B, a interação por meio de pontes de cátions é um mecanismo importante. Os AH extraídos com NaOH apresentaram valores mais elevados para a razão H/C e valores inferiores para a razão O/C do que os extraídos com pirofosfato, indicando que o extrator neutro solubilizou SH de caráter aromático e grau de oxigenação superiores.
Resumo:
Soil organic matter from the surface horizon of two Brazilian soils (a Latosol and a Chernosol), in bulk samples (in situ SOM) and in HF-treated samples (SOM), was characterized by elemental analyses, diffuse reflectance (DRIFT) and transmission Fourier transform infrared spectroscopy (T-FTIR). Humic acids (HA), fulvic acids (FA) and humin (HU) isolated from the SOM were characterized additionally by ultraviolet-visible spectroscopy (UV-VIS). After sample oxidation and alkaline treatment, the DRIFT technique proved to be more informative for the detection of "in situ SOM" and of residual organic matter than T-FTIR. The higher hydrophobicity index (HI) and H/C ratio obtained in the Chernosol samples indicate a stronger aliphatic character of the organic matter in this soil than the Latosol. In the latter, a pronounced HI decrease was observed after the removal of humic substances (HS). The weaker aliphatic character, the higher O/C ratio, and the T-FTIR spectrum obtained for the HU fraction in the Latosol suggest the occurrence of surface coordination of carboxylate ions. The Chernosol HU fraction was also oxygenated to a relatively high extent, but presented a stronger hydrophobic character in comparison with the Latosol HU. These differences in the chemical and functional group composition suggest a higher organic matter protection in the Latosol. After the HF treatment, decreases in the FA proportion and the A350/A550 ratio were observed. A possible loss of FA and condensation of organic molecules due to the highly acid medium should not be neglected.
Resumo:
A aplicação de ácidos orgânicos, principalmente húmicos (AH), associada à adubação mineral e orgânica pode levar a alterações nas propriedades dos AH do solo. No Vale do São Francisco, o uso de ácidos orgânicos vem despertando o interesse de produtores que usam sistema de irrigação. Entretanto, não são conhecidas as modificações que podem ocorrer nas características das substâncias húmicas do solo quando são aplicados ácidos orgânicos associados à fertilização mineral e estercos. Os objetivos deste trabalho foram avaliar e caracterizar, por métodos espectroscópicos (UV-Vis, Infravermelho, Fluorescência e RPE), as possíveis mudanças qualitativas no AH extraído de solo fertirrigado com duas fontes de fertilizantes (orgânica e mineral), associadas à aplicação de ácidos orgânicos comerciais na cultura da goiabeira. O experimento foi conduzido na Embrapa Semiárido, em Petrolina - PE. Os tratamentos utilizados foram: F - fertirrigação com fertilizantes minerais (ureia, fosfato monoamônio, cloreto de potássio); FE - F + aplicação de 20 dm³/planta de esterco; FH - F + fertirrigação com 30 dm³ ha-1 de Codahumus 20®; FEH - fertirrigação mineral + aplicação de 20 dm³/planta de esterco + fertirrigação com 30 dm³ ha-1 de Codahumus 20®, e R- tratamento testemunha, sem adubação. A relação E4/E6 dos AH variou de 4,8 a 5,4 para os tratamentos FEH e F. Os dados obtidos por meio da espectroscopia FTIR sugerem mistura de características aromático-alifáticas, grande quantidade de grupos carboxílicos e menor número de grupos nitrogenados para os AH dos tratamentos FEH, FH e FE. Os valores obtidos do índice A465 variaram de 1,04 a 1,74, referentes aos AH dos tratamentos FEH e FE. Verificou-se uma concentração de radicais livres orgânicos no AH do tratamento FEH (2,66 spins g-1 10(17)) três vezes maior do que o AH do tratamento F (0,95 spins g-1 10(17)). O esterco foi o responsável pelo maior de policondensação e grau de humificação do ácido húmico dos tratamentos FE e FHE.
Resumo:
A simple chemical method has been developed to quantify the silanol groups (º Si-OH) in silica as well as in coated chromatographic supports for use in packed - column Gas Chromatography. After adsorption of 10 mg/mL methylene blue, centrifuging action and filtration, the absorbance of the solution was inversely proportional to the silanol quantity. The difference between the absorbance of the pure solution and that of the solid - free filtrate was related to the silica weight, yielding a quantitative analysis of these groups.
Resumo:
SnO2 thin layers, prepared from aqueous colloidal suspensions by the sol-gel process, have been dip-coated on commercial borosilicate glasses. The effect of the conditions of deposition on the optical and structural characteristics of the thin layers was analysed by UV-Vis spectroscopy, x-ray reflectometry and electron scanning microscopy. Layers prepared with withdrawal speed in between 0.1 and 10cm/min show thickness smaller than 90nm, roughness of the order of 2nm and transmittance higher than 80%, resulting in good optical quality samples. The roughness increases from 2 to 11nm as the withdrawal speed increases from 10 to 80cm/min, what seems to be associated to the enlargement of the layers thickness (> 90nm). The measurements of mass loss, done after etching with fluoridric acid show that the coated samples are more corrosion resistant than the uncoated borosilicate glass.
Resumo:
The main objective of this research was the characterization of the humic fractions isolated from vermicomposting, originating from cattle manure and treated with Eisenea foetida or Lumbricus rubellus, during 3 and 6 months. Elemental analysis and Infrared and UV-vis spectroscopy were used for their characterizations. The results obtained shown that both humic acids are very similar, but six-month humic acid shown lower percentage of organic material than three month humic acid. The spectroscopy analysis shown that the humic acid studied can be compared with other humic acids reported in the literature. By comparing both vermicomposts, the one produced in three months presents a great potential as fertilizer and it is more economical than the vermicompost produced during a six month period.
Resumo:
The series of compounds cis-[Fe(CO)4(HgX)2], X=Cl,Br,I shows an octahedral geometry around the iron atom with the two HgX groups cis to each other. In this paper the assignment for the carbonyl stretching modes and the calculation of their force constants were performed on the basis of the Cotton-Krainhanzel model. Taking into account all the data from the IR, 199Hg NMR and UV-vis spectra it is possible to verify the influence of X on the electronic densities at the metallic centers.
Estudo comparativo sobre filtragem de sinais instrumentais usando transformadas de Fourier e Wavelet
Resumo:
A comparative study of the Fourier (FT) and the wavelet transforms (WT) for instrumental signal denoising is presented. The basic principles of wavelet theory are described in a succinct and simplified manner. For illustration, FT and WT are used to filter UV-VIS and plasma emission spectra using MATLAB software for computation. Results show that FT and WT filters are comparable when the signal does not display sharp peaks (UV-VIS spectra), but the WT yields a better filtering when the filling factor of the signal is small (plasma spectra), since it causes low peak distortion.
Resumo:
In this work the metal distribution and exchange constants between metal species and aquatic humic fractions with different molecular sizes were studied. The aquatic humic substances (AHS) were extracted by XAD-8 resin from water sample collected from Itapitanguí river, São Paulo State, Brazil. The AHS were fractionated in six fractions with different molecular sizes (>100 - <5 kDa) and characterized by several techniques. Molar ratios H/C suggested higher aromaticity for fractions F1 and F6 whereas molar ratios C/N didn´t show any differences regarding the humification degree between the fractions. The UV-Vis absorbance a254/a436 ratio showed higher results for F4 and F5, probably by less condensed features. FTIR studies showed high similarity in the functional groups in the fractions. The highest percentage of traces of Co, Al, Fe, Mn, Cu, Zn and Ni (determined by ICP-AES) was preferably complexed by fractions F3 and F4 with a greater amount of dissolved organic carbon (DOC). In addition, the exchange constants, determined by ultrafiltration method, showed complexes AHS-Fe and AHS-Al with higher stability than complexes AHS-Co in all fractions.
Resumo:
The determination of fractal dimension (D) of humic particles was achieved by the turbidimetric technique where diluted suspensions of humic acids, in different experimental conditions, were analyzed by spectrophotometry UV-Vis. The slope of the lines (beta) was taken from the graphics (logtauvs loglambda) to obtain D. The results show that the values of D changed according to pH (3.0, 5.0 and 7.0), temperature (25 and 5 ºC) and shaking (magnetic and horizontal). In general, the value of D decreased with the increment of pH, increase of shaking and decrease of temperature.
Resumo:
The aim of this paper was to determine the 10-HDA in pure royal jelly and products containing royal jelly, using HPLC methodology. 10-HDA is the natural indicator of the presence of royal jelly in products and also gives the authenticity of pure royal jelly. The chromatographic conditions used were: isocratic system, C18-H column, auto sampler, diode array UV-VIS detector (225 nm), mobile phase with methanol/water (45:55), pH= 2.5 and a-naphtol as internal standard. The results obtained using laboratory samples for pure royal jelly were 2.37%, varying from 0.15% for honey with 10% of royal jelly to 2.10% for honey with 90% of royal jelly respectivelly. For commercial products, the 10-HDA content varied from no detectable to 0.026%. The recovery test presented a minumum of 100.44% The detection limit was 45.92 ng/mL and the quantification limit was 76.53 ng/mL.
Resumo:
These films were obtained by dip coating. Parameters like dislocation velocity; number of deposits, suspension concentration, and number of deposits followed or not by heat treatment between each deposit and calcination temperature were evaluated for establishing the best homogeneity. The obtained films were characterized in terms of their morphology, optical quality and photoluminescence by scanning electron microscopy (SEM), UV-vis absorption spectrophotometry and luminescence spectroscopy, respectively. The morphologic and luminescent characteristics showed dip coating as good laboratory technique for development of thin films for optical applications.