Periodic polymer photonic bandgap structures for on-chip optical cavities

Integrated on-chip optical platforms enable high performance in applications of high-speed all-optical or electro-optical switching, wide-range multi-wavelength on-chip lasing for communication, and lab-on-chip optical sensing. Integrated optical resonators with high quality factor are a fundamental component in these applications. Periodic photonic structures (photonic crystals) exhibit a photonic band gap, which can be used to manipulate photons in a way similar to the control of electrons in semiconductor circuits. This makes it possible to create structures with radically improved optical properties. Compared to silicon, polymers offer a potentially inexpensive material platform with ease of fabrication at low temperatures and a wide range of material properties when doped with nanocrystals and other molecules. In this research work, several polymer periodic photonic structures are proposed and investigated to improve optical confinement and optical sensing. We developed a fast numerical method for calculating the quality factor of a photonic crystal slab (PhCS) cavity. The calculation is implemented via a 2D-FDTD method followed by a post-process for cavity surface energy radiation loss. Computational time is saved and good accuracy is demonstrated compared to other published methods. Also, we proposed a novel concept of slot-PhCS which enhanced the energy density 20 times compared to traditional PhCS. It combines both advantages of the slot waveguide and photonic crystal to localize the high energy density in the low index material. This property could increase the interaction between light and material embedded with nanoparticles like quantum dots for active device development. We also demonstrated a wide range bandgap based on a one dimensional waveguide distributed Bragg reflector with high coupling to optical waveguides enabling it to be easily integrated with other optical components on the chip. A flexible polymer (SU8) grating waveguide is proposed as a force sensor. The proposed sensor can monitor nN range forces through its spectral shift. Finally, quantum dot - doped SU8 polymer structures are demonstrated by optimizing spin coating and UV exposure. Clear patterns with high emission spectra proved the compatibility of the fabrication process for applications in optical amplification and lasing.

The civic achievement gap: A study on the civic knowledge, skills, and attitudes of Hispanic students in Miami-Dade County Public Schools

This study assessed the civic knowledge, skills, and attitudes of Hispanic eighth grade students in Miami-Dade County Public Schools (M-DCPS), Florida. Three hundred sixty one Hispanic students of Cuban (253), Colombian (57), and Nicaraguan (51) ancestry from 10 middle schools participated in the study. Two hundred twenty eight students were from low socio-economic status (SES) background, and 133 were of middle SES background. There were 136 boys and 225 girls. The International Association for the Evaluation of Educational Achievement Civic Education Student Questionnaire was used to collect data. The instrument assessed the students’ civic knowledge, skills, and attitudes. Multivariate analysis of variance was used to test for differences in the civic knowledge, skills, and attitudes of participants based on ancestry, SES, and gender. ^ The findings indicated that there was no significant difference in the civic knowledge, skills, and attitudes of Hispanic eighth grade students that were of Cuban, Colombian, and Nicaraguan ancestry. There was no significant difference in the civic skills and in five of the civic attitude scales for students from low SES families compared to those from middle SES families. However, there was a significant difference in the civic knowledge and in the civic attitude concerning classroom discussions and participation based on SES. The civic knowledge of middle SES students was higher than that of low SES students. Furthermore, middle SES Hispanic students displayed a higher mean score for the civic attitude of classroom discussions and participation than low SES students. There was no significant difference in the civic knowledge and in five of the civic attitude scales between boys and girls. However, there was a significant difference in the civic skills and the civic attitude of support for women’s rights between boys and girls. Hispanic girls displayed a higher mean score in civic skills than Hispanic boys. Furthermore, the mean score of civic attitude of support for women’s rights for Hispanic girls was higher than that of Hispanic boys. ^ It was concluded that Cuban, Colombian, or Nicaraguan participants did not demonstrate differences in civic attitudes and levels of civic knowledge and skills that eighth grade students possessed. In addition, when compared to boys, girls demonstrated a higher level of civic skills and a greater support for women’s rights and participation in politics and their roles in politics. Moreover, SES was demonstrated to be a key factor in the acquisition of civic knowledge, regardless of ancestry.^

“Mind the gap”: Qualitative Researchers and Mixed Methods Research

This paper presents a heuristic investigation of mixed methods organized around three pairs of opposing standpoints: methods (qualitative vs. quantitative), paradigms (constructivist vs. post positive), and inquiry approaches (dialectical vs. pragmatic).

Reducing the Discipline Gap Among African American Students: Learning in Classroom Communities of Practice

The author argues that learning in classroom communities of practice may reduce exclusionary school discipline practices and the discipline gap that disproportionately affect African American students. Communities of practice prioritize the social nature of learning as legitimate peripheral participation, encouraging community membership, social identity transformation, and synergistic relationships and spaces.

The Hospitality Gap: Bridging Russia into the 21st Century

The new intemationalization of the field of hospitality management has led to increased opportunities in the Russian Federation. At the same time, there are major challenges to be overcome. This article describes what needs to be accomplished to be successful at business in this New World Order.

Closing the productivity gap and trade *policy

The relationship between trade policy and productivity growth is regarded as ambiguous in the literature. This dissertation examines under what condition the relationship would be positive (or negative). Through the use of static and dynamic analysis, we find two conflicting effects (the pro-protection effect and the pro-competitive effect) that cause the relationship to be ambiguous. If there exists a productivity gap between the import-competing and foreign industries, and if the level of protection is low (high), the relationship is positive (negative). We also show that the import-competing firm responds to a change in the protection level by choosing a level of investment in innovation which yields a different rate of productivity growth. The policy implication, therefore, is that a trade-policy maker should set the trade protection at a level which induces the firm to choose the highest rate of productivity growth, and, as a result, leading the firm to close the initial productivity gap in the most efficient way. ^

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.

Sharon Ewe sampling seedling regeneration in a forest gap, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.