Applied Aspects of Mathematical Modeling and Optimization of Dynamics of Charged Beams

The complex of questions connected with the analysis, estimation and structural-parametrical optimization of dynamic system is considered in this article. Connection of such problems with tasks of control by beams of trajectories is emphasized. The special attention is concentrated on the review and analysis of spent scientific researches, the attention is stressed to their constructability and applied directedness. Efficiency of the developed algorithmic and software is demonstrated on the tasks of modeling and optimization of output beam characteristics in linear resonance accelerators.

Mathematical Modeling and Simulation of Radial Temperature Profile of Strontium Bromide Lasers

For metal and metal halide vapor lasers excited by high frequency pulsed discharge, the thermal effect mainly caused by the radial temperature distribution is of considerable importance for stable laser operation and improvement of laser output characteristics. A short survey of the obtained analytical and numerical-analytical mathematical models of the temperature profile in a high-powered He-SrBr2 laser is presented. The models are described by the steady-state heat conduction equation with mixed type nonlinear boundary conditions for the arbitrary form of the volume power density. A complete model of radial heat flow between the two tubes is established for precise calculating the inner wall temperature. The models are applied for simulating temperature profiles for newly designed laser. The author’s software prototype LasSim is used for carrying out the mathematical models and simulations.

Mathematical Modeling for Studying Microbial Processes – Some Examples

Mathematical modeling may have different purposes in chemical and biochemical engineering sciences. One of them is to confirm or to reject kinetic models for certain processes, or to evaluate the importance of some transport phenomena on the net chemical or biochemical reaction rate. In the present paper different microbial processes are considered and modeled for evaluation of kinetic constants for batch and continuous processes accomplished by free and immobilized microbial cells. The practical examples are from the field of wastewater treatment and biosynthesis of products, like enzymes, lactic acid, gluconic acid, etc. By the aid of mathematical modeling the kinetics and the type of inhibition are specified for microbial wastewater denitrification and biodegradation of halogenated hydrocarbons. The importance of free and immobilized cells and their separate contribution to the overall microbial process is also evaluated for some fermentation processes: gluconic acid production, dichloroethane biodegradation, lactic acid fermentation and monochloroacetic acid biodegradation.

Mathematical Modeling of the Weaving Structure Design

Красимир Йорджев, Христина Костадинова - В работата се разглежда една релация на еквивалентност в множеството от всички квадратни бинарни матрици. Обсъдена е комбинаторната задача за намиране мощността и елементите на фактормножеството относно тази релация. Разгледана е и възможността за получаване на някои специални елементи на това фактормножество. Предложен е алгоритъм за решаване на поставените задачи. Получените в статията резултати намират приложение при описанието топологията на различните тъкачни структури.

Mathematical Modeling, Music Literacy and Their Transmission in Fine Arts Education

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2014

Mathematical Model and Simulation of a Pneumatic Apparatus for In-Drilling Alignment of an Inertial Navigation Unit during Horizontal Well Drilling

Conventional methods in horizontal drilling processes incorporate magnetic surveying techniques for determining the position and orientation of the bottom-hole assembly (BHA). Such means result in an increased weight of the drilling assembly, higher cost due to the use of non-magnetic collars necessary for the shielding of the magnetometers, and significant errors in the position of the drilling bit. A fiber-optic gyroscope (FOG) based inertial navigation system (INS) has been proposed as an alternative to magnetometer -based downhole surveying. The utilizing of a tactical-grade FOG based surveying system in the harsh downhole environment has been shown to be theoretically feasible, yielding a significant BHA position error reduction (less than 100m over a 2-h experiment). To limit the growing errors of the INS, an in-drilling alignment (IDA) method for the INS has been proposed. This article aims at describing a simple, pneumatics-based design of the IDA apparatus and its implementation downhole. A mathematical model of the setup is developed and tested with Bloodshed Dev-C++. The simulations demonstrate a simple, low cost and feasible IDA apparatus.

An Intelligent System for Investigations and Provision of Safety for Complex Constructions

Methodology of computer-aided investigation and provision of safety for complex constructions and a prototype of the intelligent applied system, which implements it, are considered. The methodology is determined by the model of the object under scrutiny, by the structure and functions of investigation of safety as well as by a set of research methods. The methods are based on the technologies of object-oriented databases, expert systems and on the mathematical modeling. The intelligent system’s prototype represents component software, which provides for support of decision making in the process of safety investigations and investigation of the cause of failure. Support of decision making is executed by analogy, by determined search for the precedents (cases) with respect to predicted (on the stage of design) and observed (on the stage of exploitation) parameters of the damage, destruction and malfunction of a complex hazardous construction.

Experimental Support of Argument-based Syntactic Computation

Linguistic theory, cognitive, information, and mathematical modeling are all useful while we attempt to achieve a better understanding of the Language Faculty (LF). This cross-disciplinary approach will eventually lead to the identification of the key principles applicable in the systems of Natural Language Processing. The present work concentrates on the syntax-semantics interface. We start from recursive definitions and application of optimization principles, and gradually develop a formal model of syntactic operations. The result – a Fibonacci- like syntactic tree – is in fact an argument-based variant of the natural language syntax. This representation (argument-centered model, ACM) is derived by a recursive calculus that generates a mode which connects arguments and expresses relations between them. The reiterative operation assigns primary role to entities as the key components of syntactic structure. We provide experimental evidence in support of the argument-based model. We also show that mental computation of syntax is influenced by the inter-conceptual relations between the images of entities in a semantic space.

A Method for Classification of Doubly Resolvable Designs and Its Application

This article presents the principal results of the Ph.D. thesis Investigation and classification of doubly resolvable designs by Stela Zhelezova (Institute of Mathematics and Informatics, BAS), successfully defended at the Specialized Academic Council for Informatics and Mathematical Modeling on 22 February 2010.

Method of Linear Programming as an Idea for High School Curriculum

2010 Mathematics Subject Classification: 97D40, 97M10, 97M40, 97N60, 97N80, 97R80

Developing Financial Expertise Through Mathematics and IT School Curricula

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2014

On the Equivalence of the Riemann-Liouville and the Caputo Fractional Order Derivatives in Modeling of Linear Viscoelastic Materials

Mathematics Subject Classification: 26A33

Modeling Pulsatility in the Human Cardiovascular System

AMS Subj. Classification: 92C30

On the Mathematical Modelling of Microbial Growth: Some Computational Aspects

We propose a new approach to the mathematical modelling of microbial growth. Our approach differs from familiar Monod type models by considering two phases in the physiological states of the microorganisms and makes use of basic relations from enzyme kinetics. Such an approach may be useful in the modelling and control of biotechnological processes, where microorganisms are used for various biodegradation purposes and are often put under extreme inhibitory conditions. Some computational experiments are performed in support of our modelling approach.

Developing Students’ Mathematical Thinking and Algorithmic Culture in IT Classes

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2012