The integration of knowledge within science, technology and industry : enzymes a case study

Enzyme technology is widely regarded as an exciting new technology possessing great opportunities for commercial interests and is one of a small group of key technologies singled out by the Science Research Councils during the 1960's as worthy of special support. In this thesis I outline the basic characteristics of this technology analysing the nature of the Government's policy towards it. The approach I have chosen requires an in depth analysis of the innovation process for enzymes which forms the basis for a model. This model is then used to focus on aspects of the UK science policy towards innovation in enzyme technology, assessing its impacts, and appraising the usefulness of this approach for future policy initiatives.

Investigation of different techniques to upgrade legacy WDM communication systems

This thesis presents experimental investigation of different effects/techniques that can be used to upgrade legacy WDM communication systems. The main issue in upgrading legacy systems is that the fundamental setup, including components settings such as EDFA gains, does not need to be altered thus the improvement must be carried out at the network terminal. A general introduction to optical fibre communications is given at the beginning, including optical communication components and system impairments. Experimental techniques for performing laboratory optical transmission experiments are presented before the experimental work of this thesis. These techniques include optical transmitter and receiver designs as well as the design and operation of the recirculating loop. The main experimental work includes three different studies. The first study involves a development of line monitoring equipment that can be reliably used to monitor the performance of optically amplified long-haul undersea systems. This equipment can provide instant finding of the fault locations along the legacy communication link which in tum enables rapid repair execution to be performed hence upgrading the legacy system. The second study investigates the effect of changing the number of transmitted 1s and Os on the performance of WDM system. This effect can, in reality, be seen in some coding systems, e.g. forward-error correction (FEC) technique, where the proportion of the 1s and Os are changed at the transmitter by adding extra bits to the original bit sequence. The final study presents transmission results after all-optical format conversion from NRZ to CSRZ and from RZ to CSRZ using semiconductor optical amplifier in nonlinear optical loop mirror (SOA-NOLM). This study is mainly based on the fact that the use of all-optical processing, including format conversion, has become attractive for the future data networks that are proposed to be all-optical. The feasibility of the SOA-NOLM device for converting single and WDM signals is described. The optical conversion bandwidth and its limitations for WDM conversion are also investigated. All studies of this thesis employ 10Gbit/s single or WDM signals being transmitted over dispersion managed fibre span in the recirculating loop. The fibre span is composed of single-mode fibres (SMF) whose losses and dispersion are compensated using erbium-doped fibre amplifiers (EDFAs) and dispersion compensating fibres (DCFs), respectively. Different configurations of the fibre span are presented in different parts.

A consideration of modelling techniques that can be used to evaluate manufacturing strategies

Practising engineers frequently seek to understand what the effects of various manufacturing strategies will be on the performance of their production facilities. In this situation a computer model can help to provide insight and form predictions about future manufacturing system performance. Various types of modelling methods exist and each provide models that have distinct characteristics. This paper presents a review of popular modelling techniques and, based on the results of a structured experimental study, summarises their capabilities to support the evaluation of manufacturing strategies.

Integration of a 3D hydrogel matrix within a hollow core photonic crystal fibre for DNA probe immobilization

In this paper, we demonstrate the integration of a 3D hydrogel matrix within a hollow core photonic crystal fibre (HC-PCF). In addition, we also show the fluorescence of Cy5-labelled DNA molecules immobilized within the hydrogel formed in two different types of HC-PCF. The 3D hydrogel matrix is designed to bind with the amino groups of biomolecules using an appropriate cross-linker, providing higher sensitivity and selectivity than the standard 2D coverage, enabling a greater number of probe molecules to be available per unit area. The HC-PCFs, on the other hand, can be designed to maximize the capture of fluorescence to improve sensitivity and provide longer interaction lengths. This could enable the development of fibre-based point-of-care and remote systems, where the enhanced sensitivity would relax the constraints placed on sources and detectors. In this paper, we will discuss the formation of such polyethylene glycol diacrylate (PEGDA) hydrogels within a HC-PCF, including their optical properties such as light propagation and auto-fluorescence.

Transferring knowledge of manufacturing techniques within a subsidiary of a multi-national corporation

With the growth of the multi-national corporation (MNCs) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in the development of techniques such as Kaizen, and elements of the Toyota Production System (TPS) such as Kanban, which can be useful tools for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. Much has been written about the process of transferring Japanese manufacturing techniques but much less is understood about how the subsidiaries themselves – which are required to make use of such techniques – actually acquire and incorporate them into their operations. This research therefore takes the perspective of the subsidiary in examining how knowledge of manufacturing techniques is transferred from the parent company within its surrounding (subsidiary). There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate this knowledge into their working practices. A particularly relevant theme is how subsidiaries both replicate and adapt knowledge from parents and the circumstances in which replication or adaptation occurs. However, it is shown that there is a lack of research which takes an in-depth look at these processes from the perspective of the participants themselves. This is particularly important as much knowledge literature argues that knowledge is best viewed as enacted and learned in practice – and therefore transferred in person – rather than by the transfer of abstract and de-contextualised information. What is needed, therefore, is further research which makes an in-depth examination of what happens at the subsidiary level for this transfer process to occur. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Gambatte Corporation, involving three main manufacturing initiatives (or philosophies), namely 'TPS‘, 'TPM‘ and 'TS‘. The case data were derived from 52 in-depth interviews with project members, moderate-participant observations, and documentations and presented and analysed in episodes format. This study contributes to our understanding of knowledge transfer in relation to the approaches and circumstances of adaptation and replication of knowledge within the subsidiary, how the whole process is developed, and also how 'innovation‘ takes place. This study further understood that the process of knowledge transfer could be explained as a process of Reciprocal Provider-Learner Exchange that can be linked to the Experiential Learning Theory.

System of integration of modularised assembly FMS

The modularised assembly FMS (Flexible Manufacturing System) cascade is a form of system design which, the authors feel, could be viable in a variety of organisational and operational settings where high product mix manufacture and unitary batch sizing are common features. The philosophy behind the concept is that production facilities are market-driven and customers' orders place a direct demand pull on final assembly which, in turn, triggers all preceeding activities. Greater flexibility~is recognized as a necessary feature in modern manufacture and the implementation of modularised FMS in conjunction with state-of-the-art hardware and computer software systems enable conditions under which more flexible processing can take place.

Transferring knowledge of manufacturing techniques in multinational corporations:preliminary findings

With the growth of the multinational corporation (MNC) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in this regard, with techniques such as the Toyota Production System (TPS) for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. A great deal has been written about the process of transferring Japanese manufacturing techniques, but much less is understood about how the subsidiaries themselves, which are required to make use of such techniques, actually acquire and incorporate them into their operations. The research on which this paper is based therefore examines how, from the perspective of the subsidiary, knowledge of manufacturing techniques is transferred from the parent company. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In-depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Denso Corporation, involving three main manufacturing initiatives (or philosophies), namely ‘TPS’, ‘TPM’ and ‘TS’. The case data were derived from 52 in-depth interviews with project members, moderate participant observations, and documentations. The aim of this paper is to present the preliminary findings from the case analyses. The research contributes to our understanding of knowledge transfer in relation to the circumstances of the selection between adaptation and replication of knowledge in the subsidiary from its parent. In particular this understanding relates to transfer across different flows and levels in the organisational hierarchy, how the whole process is managed, and also how modification takes place.

The use of electronic techniques in the construction of machines which can learn

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Business sustainability through successful integration of marketing and operations

Special Issue on Integrating marketing and operations for business sustainability

Low gravity rotational culture and the integration of immunomodulatory stem cells reduce human islet allo-reactivity

Modification of human islets prior to transplantation may improve long-term clinical outcome in terms of diabetes management, by supporting graft function and reducing the potential for allo-rejection. Intragraft incorporation of stem cells secreting beta (β)-cell trophic and immunomodulatory factors represents a credible approach, but requires suitable culture methods to facilitate islet alteration without compromising integrity. This study employed a three-dimensional rotational cell culture system (RCCS) to achieve modification, preserve function, and ultimately influence immune cell responsiveness to human islets. Islets underwent intentional dispersal and rotational culture-assisted aggregation with amniotic epithelial cells (AEC) exhibiting intrinsic immunomodulatory potential. Reassembled islet constructs were assessed for functional integrity, and their ability to induce an allo-response in discrete T-cell subsets determined using mixed islet:lymphocyte reaction assays. RCCS supported the formation of islet:AEC aggregates with improved insulin secretory capacity compared to unmodified islets. Further, the allo-response of peripheral blood mononuclear cell (PBMC) and purified CD4+ and CD8+ T-cell subsets to AEC-bearing grafts was significantly (p < 0.05) attenuated. Rotational culture enables pre-transplant islet modification involving their integration with immunomodulatory stem cells capable of subduing the allo-reactivity of T cells relevant to islet rejection. The approach may play a role in achieving acute and long-term graft survival in islet transplantation.

Expanding the biomass resource:sustainable oil production via fast pyrolysis of low input high diversity biomass and the potential integration of thermochemical and biological conversion routes

Waste biomass is generated during the conservation management of semi-natural habitats, and represents an unused resource and potential bioenergy feedstock that does not compete with food production. Thermogravimetric analysis was used to characterise a representative range of biomass generated during conservation management in Wales. Of the biomass types assessed, those dominated by rush (Juncus effuses) and bracken (Pteridium aquilinum) exhibited the highest and lowest volatile compositions respectively and were selected for bench scale conversion via fast pyrolysis. Each biomass type was ensiled and a sub-sample of silage was washed and pressed. Demineralization of conservation biomass through washing and pressing was associated with higher oil yields following fast pyrolysis. The oil yields were within the published range established for the dedicated energy crops miscanthus and willow. In order to examine the potential a multiple output energy system was developed with gross power production estimates following valorisation of the press fluid, char and oil. If used in multi fuel industrial burners the char and oil alone would displace 3.9 × 105 tonnes per year of No. 2 light oil using Welsh biomass from conservation management. Bioenergy and product development using these feedstocks could simultaneously support biodiversity management and displace fossil fuels, thereby reducing GHG emissions. Gross power generation predictions show good potential.

Decision support based on genomics:integration of data-and knowledge-driven reasoning

The breadth and depth of available clinico-genomic information, present an enormous opportunity for improving our ability to study disease mechanisms and meet the individualised medicine needs. A difficulty occurs when the results are to be transferred 'from bench to bedside'. Diversity of methods is one of the causes, but the most critical one relates to our inability to share and jointly exploit data and tools. This paper presents a perspective on current state-of-the-art in the analysis of clinico-genomic data and its relevance to medical decision support. It is an attempt to investigate the issues related to data and knowledge integration. Copyright © 2010 Inderscience Enterprises Ltd.

The integration of ProxiMAX randomisation with CIS display for the production of novel peptides

Saturation mutagenesis is a powerful tool in modern protein engineering, which permits key residues within a protein to be targeted in order to potentially enhance specific functionalities. However, the creation of large libraries using conventional saturation mutagenesis with degenerate codons (NNN or NNK/S) has inherent redundancy and consequent disparities in codon representation. Therefore, both chemical (trinucleotide phosphoramidites) and biological methods (sequential, enzymatic single codon additions) of non-degenerate saturation mutagenesis have been developed in order to combat these issues and so improve library quality. Large libraries with multiple saturated positions can be limited by the method used to screen them. Although the traditional screening method of choice, cell-dependent methods, such as phage display, are limited by the need for transformation. A number of cell-free screening methods, such as CIS display, which link the screened phenotype with the encoded genotype, have the capability of screening libraries with up to 1014 members. This thesis describes the further development of ProxiMAX technology to reduce library codon bias and its integration with CIS display to screen the resulting library. Synthetic MAX oligonucleotides are ligated to an acceptor base sequence, amplified, and digested, subsequently adding a randomised codon to the acceptor, which forms an iterative cycle using the digested product of the previous cycle as the base sequence for the next. Initial use of ProxiMAX highlighted areas of the process where changes could be implemented in order to improve the codon representation in the final library. The refined process was used to construct a monomeric anti-NGF peptide library, based on two proprietary dimeric peptides (Isogenica) that bind NGF. The resulting library showed greatly improved codon representation that equated to a theoretical diversity of ~69%. The library was subsequently screened using CIS display and the discovered peptides assessed for NGF-TrkA inhibition by ELISA. Despite binding to TrkA, these peptides showed lower levels of inhibition of the NGF-TrkA interaction than the parental dimeric peptides, highlighting the importance of dimerization for inhibition of NGF-TrkA binding.