A study of nitronyl and imino nitroxide radicals attached to heterocyclic cores

Stabile organische Radikale mit zusätzlichen Funktionalitäten wie Donor/Akzepotor Eigenschaften und Ligandeneignung für Übergangsmetallkomplexierung repräsentieren eine synthetische Herausforderung beim Streben nach der Konstruktion hochdimensionaler heterospin Strukturen. In diesem Hinblick wurden acht neue Hochspinbiradikal-Moleküle zusammen mit ihren Monoradikal- Pendants in dieser Arbeit hergestellt. Die Wahl der Liganden als organische Distanzhalter der Radikaleinheiten wurde auf stickstoffhaltige Heterozyklen (Pyridin und Pyrazol) gelenkt. Diese wurden weiterhin mit den stabilen Spinträgern Nitronylnitroxid- (NN) und Iminonitroxidfragmenten (IN) dekoriert. Ihre Synthese beinhaltete mehrstufige Umsetzungen (Brominierung, Iodierung, N- und Carbaldehyd Schutzgruppen, Stille-Kupplung, Grignard Reaktion, etc.) um die Mono- und Dicarbaldehyd-heterocyclenderivate als Schlüsselvorläufer der Radikaleinheiten zu gewinnen. Die Carbaldehyd-Zwischenstufen wurden Kondensationsreaktionen mit 2,3-Dimethyl-2,3-bis(hydroxylamino)-butan unterworfen (üblicherweise in Dioxan unter Argon für ~ 7 Tage), gefolgt von der Oxidation der Bis-hydroxylimidazolidin-Vorläufer unter Phasentransferkatalyse (NaIO4/H2O). Die Radikalmoleküle wurden mit verschiedenen spektroskopischen Methoden untersucht (FT/IR, UV/Vis/ EPR etc.) und ihre Einkristalle mit Röntgenstrahlbeugung gemessen. Die UV/VIS- Lösungsspektren zeigten in einem breiten Bereich verschiedener Lösungsmittelpolaritäten keine spezifische Wechselwirkung zwischen Lösungsmittel und Radikaleinheit, während ihre Stabilitäten in protischen Lösunsgmitteln wie MeOH stark abnahmen. Als Pulver konnten sie jedoch im Kühlschrank an der Luft für eine Jahr gelagert werden, ohne sich zu zersetzen. Die spektroskopischen Fingerabdrücke der Radikale wurden eindeutig identifiziert and erschienen stark abhängig vom Typ des pi-Ringsystems an das die Spinträger gekoppelt wurden. Basierend auf diesen Informationen wurde ein schnelles Protokoll etabliert, das eine direkte Zuordnung der Art der Radikale und ihrer Anzahl ermöglicht, sowie ihre Reinheit und Verunreinigungen zu definieren. In Lösung bestätigte die Analyse der EPR Spektren der Biradikale die starke Austauschwechselwirkung J zwischen den Radikalfragmenten über die Kopplungseinheiten (J >> an, an ist die Stickstoffhyperfeinkopplungskonstante). Dies wurde weiter unterstützt durch die Beobachtungen in gefrorener Lösung über die Nullfeldaufspaltungen und verbotenen Halbfeldübergänge (Δms = 2). Die Temperaturabhängigkeiten der Δms = 2 - EPR Signale wurden bis herunter auf 4 K gemessen und das exakte Vorzeichen und die Größe von J ermittelt. Diese Arbeit unterstreicht die Möglichkeit über synthetische Chemie eine Feineinstellung der „through bond“ Austauschwechselwirkung zwischen verwandten pi- und sigma- konjugierten Heterozyklen zu erreichen, in denen der S = 1 Grundzustand angenommen wird. Zusätzlich zeigten diese Resultate, dass die Übertragung der Spinpolarisation durch verschiedene Koppler sehr effektiv war.

The collapse of linear polyelectrolyte chains in a poor solvent: When does a collapsing polyelectrolyte collect its counter ions?

The collapse of linear polyelectrolyte chains in a poor solvent: When does a collapsing polyelectrolyte collect its counter ions? The collapse of polyions in a poor solvent is a complex system and is an active research subject in the theoretical polyelectrolyte community. The complexity is due to the subtle interplay between hydrophobic effects, electrostatic interactions, entropy elasticity, intrinsic excluded volume as well as specific counter-ion and co-ion properties. Long range Coulomb forces can obscure single molecule properties. The here presented approach is to use just a small amount of screening salt in combination with a very high sample dilution in order to screen intermolecular interaction whereas keeping intramolecular interaction as much as possible (polyelectrolyte concentration cp ≤ 12 mg/L, salt concentration; Cs = 10^-5 mol/L). This is so far not described in literature. During collapse, the polyion is subject to a drastic change in size along with strong reduction of free counterions in solution. Therefore light scattering was utilized to obtain the size of the polyion whereas a conductivity setup was developed to monitor the proceeding of counterion collection by the polyion. Partially quaternized PVP’s below and above the Manning limit were investigated and compared to the collapse of their uncharged precursor. The collapses were induced by an isorefractive solvent/non-solvent mixture consisting of 1-propanol and 2-pentanone, with nearly constant dielectric constant. The solvent quality for the uncharged polyion could be quantified which, for the first time, allowed the experimental investigation of the effect of electrostatic interaction prior and during polyion collapse. Given that the Manning parameter M for QPVP4.3 is as low as lB / c = 0.6 (lB the Bjerrum length and c the mean contour distance between two charges), no counterion binding should occur. However the Walden product reduces with first addition of non solvent and accelerates when the structural collapse sets in. Since the dielectric constant of the solvent remains virtually constant during the chain collapse, the counterion binding is entirely caused by the reduction in the polyion chain dimension. The collapse is shifted to lower wns with higher degrees of quaternization as the samples QPVP20 and QPVP35 show (M = 2.8 respectively 4.9). The combination of light scattering and conductivity measurement revealed for the first time that polyion chains already collect their counter ions well above the theta-dimension when the dimensions start to shrink. Due to only small amounts of screening salt, strong electrostatic interactions bias dynamic as well as static light scattering measurements. An extended Zimm formula was derived to account for this interaction and to obtain the real chain dimensions. The effective degree of dissociation g could be obtained semi quantitatively using this extrapolated static in combination with conductivity measurements. One can conclude the expansion factor a and the effective degree of ionization of the polyion to be mutually dependent. In the good solvent regime g of QPVP4.3, QPVP20 and QPVP35 exhibited a decreasing value in the order 1 > g4.3 > g20 > g35. The low values of g for QPVP20 and QPVP35 are assumed to be responsible for the prior collapse of the higher quaternized samples. Collapse theory predicts dipole-dipole attraction to increase accordingly and even predicts a collapse in the good solvent regime. This could be exactly observed for the QPVP35 sample. The experimental results were compared to a newly developed theory of uniform spherical collapse induced by concomitant counterion binding developed by M. Muthukumar and A. Kundagrami. The theory agrees qualitatively with the location of the phase boundary as well as the trend of an increasing expansion with an increase of the degree of quaternization. However experimental determined g for the samples QPVP4.3, QPVP20 and QPVP35 decreases linearly with the degree of quaternization whereas this theory predicts an almost constant value.

Complex colloids by the emulsion solvent evaporation process

In this thesis, different complex colloids were prepared by the process of solvent evaporation from emulsion droplets (SEED). The term “complex” is used to include both an addressable functionality as well as the heterogeneous nature of the colloids.Firstly, as the SEED process was used throughout the thesis, its mechanism especially in regard to coalescence was investigated,. A wide variety of different techniques was employed to study the coalescence of nanodroplets during the evaporation of the solvent. Techniques such as DLS or FCS turned out not to be suitable methods to determine droplet coalescence because of their dependence on dilution. Thus, other methods were developed. TEM measurements were conducted on mixed polymeric emulsions with the results pointing to an absence of coalescence. However, these results were not quantifiable. FRET measurements on mixed polymeric emulsions also indicated an absence of coalescence. Again the results were not quantifiable. The amount of coalescence taking place was then quantified by the application of DC-FCCS. This method also allowed for measuring coalescence in other processes such as the miniemulsion polymerization or the polycondensation reaction on the interface of the droplets. By simulations it was shown that coalescence is not responsible for the usually observed broad size distribution of the produced particles. Therefore, the process itself, especially the emulsification step, needs to be improved to generate monodisperse colloids.rnThe Janus morphology is probably the best known among the different complex morphologies of nanoparticles. With the help of functional polymers, it was possible to marry click-chemistry to Janus particles. A large library of functional polymers was prepared by copolymerization and subsequent post-functionalization or by ATRP. The polymers were then used to generate Janus particles by the SEED process. Both dually functionalized Janus particles and particles with one functionalized face could be obtained. The latter were used for the quantification of functional groups on the surface of the Janus particles. For this, clickable fluorescent dyes were synthesized. The degree of functionality of the polymers was found to be closely mirrored in the degree of functionality of the surface. Thus, the marriage of click-chemistry to Janus particles was successful.Another complex morphology besides Janus particles are nanocapsules. Stimulus-responsive nanocapsules that show triggered release are a highly demanding and interesting system, as nanocapsules have promising applications in drug delivery and in self-healing materials. To achieve heterogeneity in the polymer shell, the stimulus-responsive block copolymer PVFc-b-PMMA was employed for the preparation of the capsules. The phase separation of the two blocks in the shell of the capsules led to a patchy morphology. These patches could then be oxidized resulting in morphology changes. In addition, swelling occurred because of the hydrophobic to hydrophilic transition of the patches induced by the oxidation. Due to the swelling, an encapsulated payload could diffuse out of the capsules, hence release was achieved.The concept of using block copolymers responsive to one stimulus for the preparation of stimulus-responsive capsules was extended to block copolymers responsive to more than one stimulus. Here, a block copolymer responsive to oxidation and a pH change as well as a block copolymer responsive to a pH change and temperature were studied in detail. The release from the nanocapsules could be regulated by tuning the different stimuli. In addition, by encapsulating stimuli-responsive payloads it was possible to selectively release a payload upon one stimulus but not upon the other one.In conclusion, the approaches taken in the course of this thesis demonstrate the broad applicability and usefulness of the SEED process to generate complex colloids. In addition, the experimental techniques established such as DC-FCCS will provide further insight into other research areas as well.