Synthesis and characterisation of photoreactive silanes for the self-assembly on functionalised silica surfaces

The aim of this thesis was to investigate novel techniques to create complex hierarchical chemical patterns on silica surfaces with micro to nanometer sized features. These surfaces were used for a site-selective assembly of colloidal particles and oligonucleotides. To do so, functionalised alkoxysilanes (commercial and synthesised ones) were deposited onto planar silica surfaces. The functional groups can form reversible attractive interactions with the complementary surface layers of the opposing objects that need to be assembled. These interactions determine the final location and density of the objects onto the surface. Photolithographically patterned silica surfaces were modified with commercial silanes, in order to create hydrophilic and hydrophobic regions on the surface. Assembly of hydrophobic silica particles onto these surfaces was investigated and finally, pH and charge effects on the colloidal assembly were analysed. In the second part of this thesis the concept of novel, "smart" alkoxysilanes is introduced that allows parallel surface activation and patterning in a one-step irradiation process. These novel species bear a photoreactive head-group in a protected form. Surface layers made from these molecules can be irradiated through a mask to remove the protecting group from selected regions and thus generate lateral chemical patterns of active and inert regions on the substrate. The synthesis of an azide-reactive alkoxysilane was successfully accomplished. Silanisation conditions were carefully optimised as to guarantee a smooth surface layer, without formation of micellar clusters. NMR and DLS experiments corroborated the absence of clusters when using neither water nor NaOH as catalysts during hydrolysis, but only the organic solvent itself. Upon irradiation of the azide layer, the resulting nitrene may undergo a variety of reactions depending on the irradiation conditions. Contact angle measurements demonstrated that the irradiated surfaces were more hydrophilic than the non-irradiated azide layer and therefore the formation of an amine upon irradiation was postulated. Successful photoactivation could be demonstrated using condensation patterns, which showed a change in wettability on the wafer surface upon irradiation. Colloidal deposition with COOH functionalised particles further underlined the formation of more hydrophilic species. Orthogonal photoreactive silanes are described in the third part of this thesis. The advantage of orthogonal photosensitive silanes is the possibility of having a coexistence of chemical functionalities homogeneously distributed in the same layer, by using appropriate protecting groups. For this purpose, a 3',5'-dimethoxybenzoin protected carboxylic acid silane was successfully synthesised and the kinetics of its hydrolysis and condensation in solution were analysed in order to optimise the silanisation conditions. This compound was used together with a nitroveratryl protected amino silane to obtain bicomponent surface layers. The optimum conditions for an orthogonal deprotection of surfaces modified with this two groups were determined. A 2-step deprotection process through a mask generated a complex pattern on the substrate by activating two different chemistries at different sites. This was demonstrated by colloidal adsorption and fluorescence labelling of the resulting substrates. Moreover, two different single stranded oligodeoxynucleotides were immobilised onto the two different activated areas and then hybrid captured with their respective complementary, fluorescent labelled strand. Selective hybridisation could be shown, although non-selective adsorption issues need to be resolved, making this technique attractive for possible DNA microarrays.

Synthesis and characterization of polyelectrolyte brushes

On the pathway to synthesizing synthetic model systems for human cartilage, macroinitiators for the ATRP of styrene sulfonate esters with different chain lengths and initiation site densities from 10 % to 100 % were synthesized. Polymer brushes from styrene sulfonate ethyl ester and styrene sulfonate dodecyl ester with varying grafting density, backbone length and side chain length were synthesized and characterized by 1H-NMR, AUC, AFM, TEM, and in the case of the ethyl esters, GPC-MALLS. Polyelectrolyte brushes from styrene sulfonate were synthesized from the corresponding esters. These brushes were characterized in solution (GPC-MALLS, static and dynamic light scattering, SANS, 1H-NMR) and on solid interfaces (AFM and TEM). It was shown that these brushes may form extended aggregates in solution. The aggregation behavior and the size and shape of the aggregates depend on the side chain length and the degree of saponification. For samples with identical backbone and side chain length, but varying degrees of ester hydrolysis, marked differences in the aggregation behavior were observed. A functionalized ATRP macroinitiator with a positively charged head group was synthesized and employed for the synthesis of a functionalized polyelectrolyte brush. These brushes were found to form complexes with negatively charged latex particles and are thus suitable as proteoglycan models in the proteoglycan-hyaluronic acid complex.

Structure formation as studied by EPR spectroscopy: From simple solutions to nanoparticles

In this thesis, three nitroxide based ionic systems were used to investigate structure and dynamics of their respective solutions in mixed solvents by means of electron paramagnetic resonance (EPR) and electron nuclear double resonance (ENDOR) spectroscopy at X- and W-band (9.5 and 94.5 GHz, respectively). rnFirst, the solvation of the inorganic radical Fremy’s salt (K2ON(SO3)2) in isotope substituted binary solvent mixtures (methanol/water) was investigated by means of high-field (W-band) pulse ENDOR spectroscopy and molecular dynamics (MD) simulations. From the analysis of orientation-selective 1H and 2H ENDOR spectra the principal components of the hyperfine coupling (hfc) tensor for chemically different protons (alcoholic methyl vs. exchangeable protons) were obtained. The methyl protons of the organic solvent approach with a mean distance of 3.5 Å perpendicular to the approximate plane spanned by ON(S)2 of the probe molecule. Exchangeable protons were found to be distributed isotropically, approaching closest to Fremy’s salt from the hydrogen-bonded network around the sulfonate groups. The distribution of exchangeable and methyl protons as found in MD simulations is in full agreement with the ENDOR results. The solvation was found to be similar for the studied solvent ratios between 1:2.3 and 2.3:1 and dominated by an interplay of H-bond (electrostatic) interactions and steric considerations with the NO group merely involved into H-bonds.rnFurther, the conformation of spin labeled poly(diallyldimethylammonium chloride) (PDADMAC) solutions in aqueous alcohol (methanol, ethanol, n-propanol, ethylene glycol, glycerol) mixtures in dependence of divalent sodium sulfate was investigated with double electron-electron resonance (DEER) spectroscopy. The DEER data was analyzed using the worm-like chain model which suggests that in organic-water solvent mixtures the polymer backbones are preferentially solvated by the organic solvent. We found a less serve impact on conformational changes due to salt than usually predicted in polyelectrolyte theory which stresses the importance of a delicate balance of hydrophobic and electrostatic interactions, in particular in the presence of organic solvents.rnFinally, the structure and dynamics of miniemulsions and polymerdispersions prepared with anionic surfactants, that were partially replaced by a spin labeled fatty acid in presence and absence of a lanthanide beta-diketonate complex was characterized by CW EPR spectroscopy. Such miniemulsions form multilayers with the surfactant head group bound to the lanthanide ion. Beta-diketonates were formerly used as NMR shift reagents and nowadays find application as luminescent materials in OLEDs and LCDs and as contrast agent in MRT. The embedding of the complex into a polymer matrix results in an easy processable material. It was found that the structure formation takes place in miniemulsion and is preserved during polymerization. For surfactants with carboxyl-head group a higher order of the alkyl chains and less lateral diffusion is found than for sulfat-head groups, suggesting a more uniform and stronger coordination to the metal ion. The stability of these bilayers depends on the temperature and the used surfactant which should be considered for the used polymerization temperature if a maximum output of the structured regions is wished.

Synthese von selbstaggregierenden Glycopeptidkonjugaten mit (per)fluorierten Membranankern

Für eine effektive Erkennung tumorassoziierter Kohlenhydratantigene durch das Immun-system in der Krebs¬immuntherapie ist eine multivalente Präsentation der Haptene notwendig. In der vorliegenden Arbeit wurde ein neuer Zugang zu einer solch räumlichen Konzentration der Haptene untersucht, indem MUC1-Antigene mit perfluorierten Alkylketten funktionalisiert und in einer geeigneten Lipidmatrix entmischt wurden. Perfluoralkyl-Amphiphile zeichnen sich durch eine hohe Entmischungstendenz in Alkyllipiden aus und bewirken dadurch eine Anreicherung der Erkennungsstrukturen (Haptene) in Analogie zu den natürlichen raft-Domänen auf der Zelloberfläche.rnDazu wurden zunächst verschiedene Membranankersysteme mit unterschiedlichem Fluorierungsgrad entwickelt. Beispielsweise konnte ausgehend von einem zentralen Glycerin-fragment ein Membrananker mit zwei Perfluoralkylketten hergestellt werden. Letztere wurden mittels radikalischer Perfluoralkylierung eingeführt, wobei der Fluorgehalt der Verbindung über die Kettenlänge gesteuert wurde. Daneben konnte ein weiteres Ankersystem, basierend auf der Aminosäure Lysin, synthetisiert werden, dass einen bequemen Einbau der Perfluoralkylketten durch Peptidkupplungen von entsprechenden perfluorierten Aminen bzw. perfluorierten Carbonsäuren erlaubte. In diesem Fall wurde der Fluorgehalt durch die Einführung von Alkyl- bzw. Perfluoralkylketten verändert.rnBeide Systeme konnten für erste Untersuchungen ihres Phasenverhaltens mit polaren Kopf-gruppen ausgestattet werden, wobei neben einem hydrophilen, nicht-immunogenen Triethylenglycolspacer vor allem ein TN-Antigen tragendes Dipeptid zum Einsatz kam. In Gegenwart des Matrixlipids DODAMA konnten in Langmuir-Blodgett-Untersuchungen mit diesen Verbindungen eine Entmischung und die Ausbildung mikroseparierter Bereiche nachgewiesen werden. Auch war es möglich, durch Anbindung eines Fluoreszenzfarbstoffes zu zeigen, dass solche amphiphilen Membrananker auf perfluorierten Oberflächen effektiv und dauerhaft immobilisiert werden können. Damit eröffnet diese Verbindungsklasse interessante Anwendungsmöglichkeiten in der Entwicklung von diagnostischen Microarray-Formaten.rnUm eine Anbindung der fluorierten Membrananker an den N-Terminus eines an fester Phase aufgebauten mucinanalogen Glycopeptids als antigene Einheit zu ermöglichen, wurde ein entsprechendes Ankersystem auf Basis von Glutaminsäure entwickelt. Dabei wurden an diese Verbindung neben dem TN-Antigen noch weitere komplexe tumorassoziierte Kohlenhydrat-antigene des Mucintyps angebunden, wobei der Aufbau der resultierenden amphiphilen Glycolipopeptide vollständig an der festen Phase gelang. Insgesamt konnten so mithilfe des teilfluorierten Lysinankers und des zweifach perfluorierten Glutaminsäureankers erste amphiphile Glycopeptid-Konjugate hergestellt werden, deren antigene Kopfgruppe aus einer 20 Aminosäuren umfassenden Wiederholungseinheit des Mucins MUC1 mit TN-, T- bzw. STN-Antigen-Seitenkette besteht. Derartige Verbindungen stellen reizvolle Bausteine für die Tumordiagnostik und für die Entwicklung von stabilen liposomalen Tumorvakzinen dar, da die verwendeten Perfluoralkylanker die Antigenpräsentation nicht wesentlich beeinflussen und die Bindung des Antikörpers nicht behindern. rn