Visualization, manipulation and force spectroscopy of cylindrical polymer brushes

The Ph.D. thesis deals with the conformational study of individual cylindrical polymer brush molecules using atomic force microscopy (AFM). Imaging combined with single molecule manipulation has been used to unravel questions concerning conformational changes, desorption behavior and mechanical properties of individual macromolecules and supramolecular structures. In the first part of the thesis (chapter 5) molecular conformations of cylindrical polymer brushes with poly-(N-isopropylacrylamide) (PNIPAM) side chains were studied in various environmental conditions. Also micelle formation of cylindrical brush-coil blockcopolymers with polyacrylic acid side chains and polystyrene coil have been visualized. In chapter 6 the mechanical properties of single cylindrical polymer brushes with (PNIPAM) side chains were investigated. Assuming that the brushes adopt equilibrium conformation on the surface, an average persistence length of lp= (29 ± 3) nm was determined by the end-to-end distance vs. contour length analysis in terms of the wormlike chain (WLC) model. Stretching experiments suggest that an exact determination of the persistence length using force extension curves is impeded by the contribution of the side chains. Modeling the stretching of the bottle brush molecule as extension of a dual spring (side chain and main chain) explains the frequently observed very low persistence length arising from a dominant contribution of the side chain elasticity at small overall contour lengths. It has been shown that it is possible to estimate the “true” persistence length of the bottle brush molecule from the intercept of a linear extrapolation of the inverse square root of the apparent persistence length vs. the inverse contour length plot. By virtue of this procedure a “true” persistence length of 140 nm for the PNIPAM brush molecules is predicted. Chapter 7 and 8 deal with the force-extension behavior of PNIPAM cylindrical brushes studied in poor solvent conditions. The behavior is shown to be qualitatively different from that in a good solvent. Force induced globule-cylinder conformational changes are monitored using “molecule specific force spectroscopy” which is a combined AFM imaging and SMFS technique. An interesting behavior of the unfolding-folding transitions of single collapsed PNIPAM brush molecules has been observed by force spectroscopy using the so called “fly-fishing” mode. A plateau force is observed upon unfolding the collapsed molecule, which is attributed to a phase transition from a collapsed brush to a stretched conformation. Chapter 9 describes the desorption behavior of single cylindrical polyelectrolyte brushes with poly-L-lysine side chains deposited on a mica surface using the “molecule specific force spectroscopy” technique to resolve statistical discrepancies usually observed in SMFS experiments. Imaging of the brushes and inferring the persistence length from a end-to-end distance vs. contour length analysis results in an average persistence length of lp = (25 ± 5) nm assuming that the chains adopt their equilibrium conformation on the surface. Stretching experiments carried out on individual poly-L-lysine brush molecules by force spectroscopy using the “fly-fishing” mode provide a persistence length in the range of 7-23 nm in reasonable accordance with the imaging results. In chapter 10 the conformational behavior of cylindrical poly-L-lysine brush-sodium dodecyl sulfate complexes was studied using AFM imaging. Surfactant induced cylinder to helix like to globule conformational transitions were observed.

Untersuchung der Struktur und Assemblierung des Lichtsammelkomplexes II höherer Pflanzen mittels elektronenparamagnetischer Resonanz (EPR)

Der Haupt-Lichtsammelkomplex (LHCII) des Photosyntheseapparates höherer Pflanzen gehört zu den häufigsten Membranproteinen der Erde. Seine Kristallstruktur ist bekannt. Das Apoprotein kann rekombinant in Escherichia coli überexprimiert und somit molekularbiologisch vielfältig verändert werden. In Detergenzlösung besitzt das denaturierte Protein die erstaunliche Fähigkeit, sich spontan zu funktionalen Protein-Pigment-Komplexen zu organisieren, welche strukturell nahezu identisch sind mit nativem LHCII. Der Faltungsprozess findet in vitro im Zeitbereich von Sekunden bis Minuten statt und ist abhängig von der Bindung der Cofaktoren Chlorophyll a und b sowie verschiedenen Carotinoiden.rn Diese Eigenschaften machen LHCII besonders geeignet für Strukturuntersuchungen mittels der elektronenparamagnetischen Resonanz (EPR)-Spektrokopie. Diese setzt eine punktspezifische Spinmarkierung des LHCII voraus, die in dieser Arbeit zunächst optimiert wurde. Einschließlich der Beiträge Anderer stand eine breite Auswahl von über 40 spinmarkierten Mutanten des LHCII bereit, einen N-terminalen „Cys walk“ eingeschlossen. Weder der hierfür notwendige Austausch einzelner Aminosäuren noch die Anknüpfung des Spinmarkers beeinträchtigten die Funktion des LHCII. Zudem konnte ein Protokoll zur Präparation heterogen spinmarkierter LHCII-Trimere entwickelt werden, also von Trimeren, die jeweils nur ein Monomer mit einer Spinmarkierung enthalten.rn Spinmarkierte Proben des Detergenz-solubilisierten LHCII wurden unter Verwendung verschiedener EPR-Techniken strukturell analysiert. Als besonders aussagekräftig erwies sich die Messung der Wasserzugänglichkeit einzelner Aminosäurepositionen anhand der Electron Spin Echo Envelope Modulation (ESEEM). In Kombination mit der etablierten Double Electron-Electron Resonance (DEER)-Technik zur Detektion von Abständen zwischen zwei Spinmarkern wurde der membranständige Kernbereich des LHCII in Lösung eingehend untersucht und strukturell der Kristallstruktur für sehr ähnlich befunden. Die Vermessung kristallographisch nicht erfasster Bereiche nahe dem N-Terminus offenbarte die schon früher detektierte Strukturdynamik der Domäne in Abhängigkeit des Oligomerisierungsgrades. Der neue, noch zu vervollständigende Datensatz aus Abstandsverteilungen und ESEEM-Wasserzugänglichkeiten monomerer wie trimerer Proben sollte in naher Zukunft die sehr genaue Modellierung der N-terminalen Domäne des LHCII ermöglichen.rn In einem weiteren Abschnitt der Arbeit wurde die Faltung des LHCII-Apoproteins bei der LHCII-Assemblierung in vitro untersucht. Vorausgegangene fluoreszenzspektroskopi-sche Arbeiten hatten gezeigt, dass die Bindung von Chlorophyll a und b in aufeinanderfolgenden Schritten im Zeitbereich von weniger als einer Minute bzw. mehreren Minuten erfolgten. Sowohl die Wasserzugänglichkeit einzelner Aminosäurepositionen als auch Spin-Spin-Abstände änderten sich in ähnlichen Zeitbereichen. Die Daten deuten darauf hin, dass die Ausbildung der mittleren Transmembran-Helix mit der schnelleren Chlorophyll-a-Bindung einhergeht, während sich die Superhelix aus den beiden anderen Transmembranhelices erst im langsameren Schritt, zusammen mit der Chlorophyll-b-Bindung, ausbildet.rn

Solubility and permeability as in vitro predictors for in vivo performance of fenofibrate IR solid dosage forms

This current work focused on the simulation of in vivo dissolution and permeation in order to be able to predict the in vivo performance of orally administered fenofibrate immediate release formulations. Therefore, the effects of the formulation surfactants on in vivo solubility and permeation of fenofibrate under physiologically relevant excipient concentrations were emphasized.rnIt was shown that the surfactant sodium dodecyl sulfate (SDS) may decrease rather than increase the solubility of fenofibrate in vivo. This was related to the interference of SDS with the vesicular system of the biorelevant medium, FaSSIFmod, and therefore its solubilization capacity. rnMoreover, in vitro permeation studies revealed that SDS concentrations inversely correlated with fenofibrate permeability. Through combination of the observed permeation and solubility data a good in vitro/in vivo correlation regarding Cmax values in humans could be established for five fenofibrate formulations which were based on the same manufacturing technique.rnBesides the experimental part, the major characteristics and their potential implementation in a dissolution/permeation device were discussed based on the promising realization of the in vitro solubility and permeation methods. rn

Photo-induced reversible assembly of colloidal polymer nanoparticles

Polymer nanoparticles functionalized on the surface with photo-responsive labels were synthesized. In a first synthetic step, polystyrene was copolymerized with the cross-linker divinylbenzene and poly(ethylene glycol) acrylate in a miniemulsion, to produce nano-sized spheres (~ 60 nm radius) with terminal hydroxyl groups, which were functionalized in a subsequent synthetic step with photo-responsive labels. For this purpose, two photo-active molecular structures were separately used: anthracene, which is well known to form covalently bonded dimers upon photo-excitation; and pyrene, which only forms short lived excited state dimers (excimers). Acid derivatives of these labels (9-anthracene carboxylic acid and 1-pyrene butyric acid) were bonded to the hydroxyl terminal groups of the nanoparticles through an esterification reaction, via the intermediate formation of the corresponding acid chloride.rnThe obtained labeled nanoparticles appeared to be highly hydrophobic structures. They formed lyophobic suspensions in water, which after analysis by dynamic light scattering (DLS) and ultramicroscopic particle tracking, appeared to equilibrate as a collection of singly dispersed nanoparticles, together with a few nanoparticle aggregates. The relative amount of aggregates decreased with increasing amounts of the surfactant sodium dodecyl sulfate (SDS), thus confirming that aggregation is an equilibrated state resulting from lyophobicity. The formation of such aggregates was corroborated using scanning electron microscopy (SEM). The photo-irradiation of the lyophobic aqueous suspensions of anthracene labeled nanoparticles (An-NP) resulted in the formation of higher aggregates, as evidenced by DLS and ultramicroscopy. The obtained state of aggregation could be reverted by sonication. The possibility to re-aggregate the system in subsequent photo-excitation and sonication cycles was established. Likewise, the photo-irradiation of lyophobic aqueous suspensions of pyrene-labeled nanoparticles (Py-NP) resulted in the formation of higher aggregates, as evidenced by DLS and ultramicroscopy. These appeared to remain aggregated due to hydrophobic interactions. This system could also be re-dispersed by sonication and re-aggregated in subsequent cycles of photo-excitation and sonication.

Plasmonic nanoparticles as sensors : a novel approach to quantify adsorption and diffusion kinetics

Biosensors find wide application in clinical diagnostics, bioprocess control and environmental monitoring. They should not only show high specificity and reproducibility but also a high sensitivity and stability of the signal. Therefore, I introduce a novel sensor technology based on plasmonic nanoparticles which overcomes both of these limitations. Plasmonic nanoparticles exhibit strong absorption and scattering in the visible and near-infrared spectral range. The plasmon resonance, the collective coherent oscillation mode of the conduction band electrons against the positively charged ionic lattice, is sensitive to the local environment of the particle. I monitor these changes in the resonance wavelength by a new dark-field spectroscopy technique. Due to a strong light source and a highly sensitive detector a temporal resolution in the microsecond regime is possible in combination with a high spectral stability. This opens a window to investigate dynamics on the molecular level and to gain knowledge about fundamental biological processes.rnFirst, I investigate adsorption at the non-equilibrium as well as at the equilibrium state. I show the temporal evolution of single adsorption events of fibrinogen on the surface of the sensor on a millisecond timescale. Fibrinogen is a blood plasma protein with a unique shape that plays a central role in blood coagulation and is always involved in cell-biomaterial interactions. Further, I monitor equilibrium coverage fluctuations of sodium dodecyl sulfate and demonstrate a new approach to quantify the characteristic rate constants which is independent of mass transfer interference and long term drifts of the measured signal. This method has been investigated theoretically by Monte-Carlo simulations but so far there has been no sensor technology with a sufficient signal-to-noise ratio.rnSecond, I apply plasmonic nanoparticles as sensors for the determination of diffusion coefficients. Thereby, the sensing volume of a single, immobilized nanorod is used as detection volume. When a diffusing particle enters the detection volume a shift in the resonance wavelength is introduced. As no labeling of the analyte is necessary the hydrodynamic radius and thus the diffusion properties are not altered and can be studied in their natural form. In comparison to the conventional Fluorescence Correlation Spectroscopy technique a volume reduction by a factor of 5000-10000 is reached.