Schur-SzegA composition of entire functions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the calculation of inner products of Schur functions

Two methods for calculating inner products of Schur functions in terms of outer products and plethysms are given and they are easy to implement on a machine. One of these is derived from a recent analysis of the SO(8) proton-neutron pairing model of atomic nuclei. The two methods allow for generation of inner products for the Schur functions of degree up to 20 and even beyond.

Schur-Szegö composition of entire functions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aspectos morfológicos da bulla tympanica de cães após osteotomia restrita ventral e lateral

O objetivo deste trabalho foi investigar os aspectos morfológicos da bulla tympanica após osteotomia ventral e lateral. Quarenta cães adultos foram distribuídos em dois grupos de 20 animais cada. No grupo A , os animais foram submetidos a osteotomia ventral da bulla tympanica e no grupo B, a osteotomia lateral da bulla tympanica. Cada grupo foi constituído de 2 subgrupos, de acordo com o período de observação: A1 e B1 (6 semanas), A2 e B2 (12 semanas). No exame macroscópico constatou-se que a concavidade de todas as bullae tympanicae operadas era semelhante às normais. Os estudos histológicos mostraram que a regeneração completa da bulla tympanica ocorreu em apenas alguns animais de cada subgrupo. A presença de tecido conjuntivo na área de osteotomia foi verificada na maioria das bullae tympanicae operadas, resultado estatisticamente significante. A análise histológica e a histomorfometria computadorizada não mostraram diferença significante quanto ao estágio de regeneração óssea em todos os subgrupos. Concluiu-se que uma área de ostetomia restrita não causou alterações significantes na conformação da bulla tympanica de cães submetida a osteotomia ventral ou lateral; e que a regeneração total da bulla tympanica geralmente não ocorreu antes de 12 semanas de pós-operatório.

Alternative fidelity measure between quantum states

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The plethysm technique applied to the classification of nuclear states

A short summary of the theory of symmetric group and symmetric functions needed to follow the theory of Schur functions and plethysms is presented. One then defines plethysm, gives its properties and presents a procedure for its calculation. Finally, some aplications in atomic physics and nuclear structure are given.

Avaliação tomográfica dos pedículos vertebrais no tratamento cirúrgico dos pacientes com escoliose idiopática do adolescente

OBJETIVO: Determinar através de cortes tomográficos e reconstrução tridimensional a incidência de mal posicionamento de parafusos em pacientes submetidos ao tratamento cirúrgico da Escoliose idiopática do adolescente. MÉTODOS: Foram analisados exames tomográficos de 8 pacientes, tratados cirurgicamente no Hospital de Base de São José do Rio Preto-SP, realizada instrumentação posterior partindo de T2 /T4 a L4/L5 totalizando 164 parafusos. RESULTADOS: 32,9% (n=54) apresentavam posicionamento com risco potencial,ou seja desvio acima de 2 milímetros, sendo 20,1% (n=33) com invasão lateral, 9,1% (n=15) com invasão medial, 3,6 %(n=6) com invasão anterior. Dos parafusos que ofereciam risco potencial a relação com aspecto da curva foi de 46% (n=25) na concavidade, 35% (n=19) na convexidade e 19% (n=10) em vértebras adjacentes a curva. CONCLUSÃO: Os limites de penetração aceitáveis, assim como os métodos de mensuração ainda não foram padronizados, a técnica free hand' mostrou-se segura, apesar da violação dos pedículos. A tomografia computadorizada pré-operatória, auxilia no planejamento cirúrgico e na redução das complicações.

Paradental cyst: Report of two cases

Background: the paradentat cyst is an odontogenic lesion of inflammatory origin that has few clinical signs and symptoms apart from recurring acute episodes. A well-defined radiolucency associated with the roots or distal to the crown may be seen radiographically. The purpose of this article is to report on different aspects of two cases involving paradental cysts. In the first case, the patient complained about recurring pericoronitis. A semilunar-shaped radiolucency on the distal aspect of the mandibular third molar was noted on the periapical radiograph. In the second case, the patient's main complaint was chronic trauma of the overlying mucosa. Radiographs revealed an enlarged pericoronal space.Methods: In both cases, the mandibular third molar was extracted due to a lack of space. Lesional samples were sent for histopathologic analysis.Results: In the first case, the drainage of cystic fluid and a regular concavity were found during tooth removal. In the second case, a nodular lesion was found adhering to the disto-buccal surface of the tooth arising from the distal wall of a periodontal pocket. The histopathologic analysis revealed a hyperplastic stratified squamous epithelium with arcading lining a fibrous capsule with inflammatory infiltrate, resulting in a final diagnosis of a paradental cyst.Conclusions: the presence of a paradental cyst should be considered when recurrent inflammatory periodontal processes are associated with partially erupted vital teeth, even when characteristic radiographic findings are absent. Definitive diagnosis requires a clinicopathologic correlation incorporating surgical, radiographic, and histologic findings.

Long-term effectiveness and treatment timing for bionator therapy

The aim of the present investigation was to provide information about the long-term effects and optimal timing for class-II treatment with the Bionator appliance. Lateral cephalograms of 23 class-II patients treated with the Bionator were analyzed at three time periods: T1, start of treatment; T2, end of Bionator therapy; and T3, long-term observation (after completion of growth). T3 includes a phase with fixed appliances. The treated sample was divided into two groups according to their skeletal maturity as evaluated by the cervical vertebral maturation (CVM) method. The early-treated group (13 subjects) initiated treatment before the peak in mandibular growth, which occurred after completion of Bionator therapy. The late-treated group (10 subjects) received Bionator treatment during the peak. The T1-T2, T2-T3, and T1-T3 changes in the treated groups were compared with changes in control groups of untreated class-II subjects by nonparametric statistics (P < .05). The findings of the present study on Bionator therapy followed by fixed appliances indicate that this treatment protocol is more effective and stable when it is performed during the pubertal growth spurt. Optimal timing to start treatment with the Bionator is when a concavity appears at the lower borders of the second and the third cervical vertebrae (CVMS 11). In the long term, the amount of significant supplementary elongation of the mandible in subjects treated during the pubertal peak is 5.1 mm more than in the controls, and it is associated with a backward direction of condylar growth. Significant increments in mandibular ramus height also were recorded.

Evaluation of cutting patterns produced with air-abrasion systems using different tip designs.

This study assessed cavity preparations produced with different air abrasion tip parameters. Twelve test groups of extracted teeth were prepared to evaluate the parameters of 80 degrees or 45 degrees nozzle angles and 0.38 or 0.48 mm inner tip diameters. All other factors were held constant. A device was made to hold the specimen and air abrasion handpiece that standardized the distance and position relative to the tooth and time of application. The cavities were evaluated by assessing the rounding of the cavosurface margins and cavity floor. Measurements of cavosurface angles and the angle of concavity were made at the deepest portion of the abraded surface using scanning electron micrographs. The cavosurface angles were compared using paired t-test, and the effects of the tip design parameters were analyzed by ANOVA and Duncan's Multiple Range test. From the cavity patterns found in this study, the authors suggest that 80 degrees angle tips are more appropriate than 45 degrees angle tips for making narrow, deep cuts for preventive resin restorations. Conversely, when shallow preparations are needed, as in the case of Class V cavity preparations, cutting patterns of 45 degrees angle tips are more suitable.

Concerning the stability of BDF methods

We present an analysis of A0-stability of BDF methods and proof that zero-stable BDF methods are A0-stable using the Schur-Cohn criterion. With this result we have that zero-stable BDF methods are stiffly-stable. © 2008 American Institute of Physics.

Classificação fuzzy de vertentes por krigagem e TPS com agregação de regiões via diagrama de Voronoi

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cohomologia de grupos e algumas aplicações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Campos de vetores lineares reversíveis equivariantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de métodos de preservação dos grãos úmidos de milho e de sorgo sobre a estrutura do endosperma, dos grânulos de amido e desempenho de leitões

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)