Low voltage four-quadrant current multiplier: An improved topology for n-well CMOS process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Low voltage four-quadrant current multiplier: an improved topology for n-well CMOS process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A low-voltage triode-MOSFET four-quadrant multiplier with optimized current-efficiency

A low-voltage, low-power four-quadrant analog multiplier with optimized current-efficiency is presented. Its core corresponds to a pseudodifferential cascode, gain-boosting triode-transconductor. According to a low-voltage 1.2μm CMOS n-well process, operand differential-amplitudes are 1.0Vpp and 0.32Vpp for a 1.3V-supply. Common-mode voltages are properly chosen to maximize current-efficiency to 58%. Total quiescent dissipation is 260μW. A range of PSPICE simulation supports theoretical analysis. Excellent linearity is observed on dc characteristic. Assuming a ±0.5% mismatch on (W/L) and VTH THD at full-scale is 0.93% and 1.42%, for output frequencies of 1MHz and 10MHz, respectively.

Efeito da idade sobre as principais características andrológicas de touros Brangus- Efeito da idade sobre as principais características andrológicas de touros BrangusIbagé criados extensivamente no estado do Mato Grosso do Sul - Brasil Ibagé criados extensivamente no estado do Mato Grosso do Sul - Brasil

Background: Bull fertility is extremely important for beef cattle production systems and has a multiplier impact on the economical and zootechnical indexes of the herd. Bulls raised in tropical conditions may present varied seminal characteristics due to, among other causes, different management practices and quality of pastures. Another factor that influences the semen characteristics is the age of the sire. The reproductive potential of bull evaluated through the andrological exam aims to ensure the semen quality and to improve the herd reproductive efficiency. The aim of this study was to evaluate the main semen parameters of Brangus-Ibage bulls extensively reared in eastern Mato Grosso do Sul state and to verify the effect of age on the andrological characteristics analyzed. It was also evaluated the correlation between age, scrotal circumference, and physical and morphological sperm characteristics produced by the Brangus bulls.Materials, Methods & Results: The study took place in the month of July 2010, during the routine andrological examination of 168 synthetic Brangus-Ibage bulls (5/8 Angus x 3/8 Nelore), belonging to the same property. For data analysis the animals were divided by age groups: animals younger than 4 years (Age I), animals between 4 and 8 years of age (Age II), and animals between 8 and 15 years of age (Age III). In another analysis, the animals were grouped according to the sperm motility pattern obtained from the semen collection: sperm motility lower than 40% (Motility I), sperm motility between 40 and 70% (Motility II) and sperm motility between 70 and 90% (Motility III). The results of the present study demonstrated an effect of age (P < 0.05) on the following androgical characteristics: scrotal circumference, ejaculate volume, sperm vigor, major defects, minor defects and total defects. It was also observed that the animals with higher sperm motility presented higher (P < 0.05) scrotal circumference, and lower (P < 0.05) percentages of major and total defects. Among the andrological characteristics evaluated in the present work, it was observed positive correlations between age and scrotal circumference (R =0.299; P =0.000), age and volume of ejaculate (R =0.161; P =0.037), age and major defects (R =0.188; P =0.015), sperm motility and scrotal circumference (R =0.245; P =0.001), sperm motility and sperm vigor (R =0.483; P =0.000), and between major defects and total defects (R =0.946; P =0.000). Also, negative correlations were observed between sperm motility and total defects (R =-0.372; P =0.000), sperm vigor and major defects (R =-0.498; P =0.000), and sperm vigor and total defects (R =-0.432; P =0.000).Discussion: Based on the results of this study it was concluded that the Brangus-Ibage bulls utilized for natural breeding in eastern Mato Grosso do Sul, Brazil, presented satisfactory semen quality taking into account the quality of the pastures where the animals were located. In addition, the scrotal circumference, the ejaculate volume, the sperm vigor, and the percentage of morphological characteristics were influenced by the age of the bulls. Therefore, considering the production system and the environmental conditions, the animals with age between 4 and 8 years were superior regarding the sperm parameters evaluated.

A branch-and-price approach to p-median location problems

This paper describes a branch-and-price algorithm for the p-median location problem. The objective is to locate p facilities (medians) such as the sum of the distances from each demand point to its nearest facility is minimized. The traditional column generation process is compared with a stabilized approach that combines the column generation and Lagrangean/surrogate relaxation. The Lagrangean/surrogate multiplier modifies; the reduced cost criterion, providing the selection of new productive columns at the search tree. Computational experiments are conducted considering especially difficult instances to the traditional column generation and also with some large-scale instances. (C) 2004 Elsevier Ltd. All rights reserved.

Application of a meshless method in electromagnetics

An improved meshless method is presented with an emphasis on the detailed description of this new computational technique and its numerical implementations by investigating the usefulness of a commonly neglected parameter in this paper. Two approaches to enforce essential boundary conditions are also thoroughly investigated. Numerical tests on a mathematical function is carried out as a means of validating the proposed method. It will be seen that the proposed method is more robust than the conventional ones. Applications in solving electromagnetic problems are also presented.

A low-voltage low-power analog memory cell with built-in 4-quadrant multiplication

An accurate switched-current (SI) memory cell and suitable for low-voltage low-power (LVLP) applications is proposed. Information is memorized as the gate-voltage of the input transistor, in a tunable gain-boosting triode-transconductor. Additionally, four-quadrant multiplication between the input voltage to the transconductor regulation-amplifier (X-operand) and the stored voltage (Y-operand) is provided. A simplified 2 x 2-memory array was prototyped according to a standard 0.8 mum n-well CMOS process and 1.8-V supply. Measured current-reproduction error is less than 0.26% for 0.25 muA less than or equal to I-SAMPLE less than or equal to 0.75 muA. Standby consumption is 6.75 muW per cell @I-SAMPLE = 0.75 muA. At room temperature, leakage-rate is 1.56 nA/ms. Four-quadrant multiplier (4QM) full-scale operands are 2x(max) = 320 mV(pp) and 2y(max). = 448 mV(pp), yielding a maximum output swing of 0.9 muA(pp). 4QM worst-case nonlinearity is 7.9%.

Optimal control problem for deflection plate with crack

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis and design of constant-frequency peak-current-controlled high-power-factor boost rectifier with slope compensation

This paper presents the analysis and the design of a peak-current-controlled high-power-factor boost rectifier, with slope compensation, operating at constant frequency. The input current shaping is achieved, with continuous inductor current mode, with no multiplier to generate a current reference. The resulting overall circuitry is very simple, in comparison with the average-current-controlled boost rectifier. Experimental results are presented, taken from a laboratory prototype rated at 370 W and operating at 67 kHz. The measured power factor was 0.99, with a input current THD equal to 5.6%, for an input voltage THD equal to 2.26%.

Exploring a rheonomic system

A simple and illustrative rheonomic system is explored in the Lugrangian formalism. The difference between the Jacobi integral and the energy is highlighted. A sharp contrast with remarks found in the literature is pointed out. The non-conservative system possesses a Lagrangian that is not explicitly dependent on time and consequently there is a Jacobi integral. The Lagrange undetermined multiplier method is used as a complement to obtain a few interesting conclusions.

An accurate low-voltage analog memory-cell with built-in multiplication

A CMOS memory-cell for dynamic storage of analog data and suitable for LVLP applications is proposed. Information is memorized as the gate-voltage of input-transistor of a gain-boosting triode-transconductor. The enhanced output-resistance improves accuracy on reading out the sampled currents. Additionally, a four-quadrant multiplication between the input to regulation-amplifier of the transconductor and the stored voltage is provided. Designing complies with a low-voltage 1.2μm N-well CMOS fabrication process. For a 1.3V-supply, CCELL=3.6pF and sampling interval is 0.25μA≤ ISAMPLE ≤ 0.75μA. The specified retention time is 1.28ms and corresponds to a charge-variation of 1% due to junction leakage @75°C. A range of MR simulations confirm circuit performance. Absolute read-out error is below O.40% while the four-quadrant multiplier nonlinearity, at full-scale is 8.2%. Maximum stand-by consumption is 3.6μW/cell.

Necessary and sufficient condition for generalized passivity, passification and application to multivariable adaptive systems

Recently, a generalized passivity concept for linear multivariable systems was obtained which allows circumventing the restrictiveness of the usual passivity concept. The latter is associated with the classical SPR (Strictly Positive Real) condition whereas the new concept of passivity is associated with the so called WSPR condition and its advantage in multivariable systems is that it does not require a restrictive symmetry condition of SPR systems. As a result, it allows the design of multivariable adaptive control that, unlike some existing factorization approaches, does not imply in additional overparameterization of the adaptive controller. In this paper, we complete a previously established WSPR sufficient condition and prove that it is also necessary. We also propose some methods of passification by either premultiplying the system output tracking error vector or the system input vector by an adequate passifying matrix multiplier, so that the resulting input/output transfer function becomes WSPR. The efficiency of our proposals are illustrated by simulation utilizing a well known robotics adaptive visual servoing problem. © 2011 IFAC.

A maximum principle for constrained infinite horizon dynamic control systems

This article presents and discusses a maximum principle for infinite horizon constrained optimal control problems with a cost functional depending on the state at the final time. The main feature of these optimality conditions is that, under reasonably weak assumptions, the multiplier is shown to satisfy a novel transversality condition at infinite time. It is also shown that these conditions can also be obtained for impulsive control problems whose dynamics are given by measure driven differential equations. © 2011 IFAC.

Efficiency analysis of an isolated high voltage gain converter operating in resonant and non-resonant mode

This paper presents an efficiency investigation of an isolated high step-up ratio dc-dc converter aimed to be used for energy processing from low-voltage high-current energy sources, like batteries, photovoltaic modules or fuel-cells. The considered converter consists of an interleaved active clamp flyback topology combined with a voltage multiplier at the transformer secondary side capable of two different operating modes, i.e. resonant and non-resonant according to the design of the output capacitors. The main goal of this paper is to compare these two operating modes from the component losses point of view with the aim of maximize the overall converter efficiency. The approach is based on losses prediction using steady-state theoretical models (designed in Mathcad environment), taking into account both conduction and switching losses. The models are compared with steady-state simulations and experimental results considering different operating modes to validate the approach. © 2012 IEEE.

Análise não suave e aplicações em otimização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)