Fractals de Rauzy

We study arithmetical and topological properties of a class of Rauzy Fractals. In particular, we give a parametrization of the boundaries of these sets and show that they are quasi-disks.

Tilings induced by a class of cubic Rauzy fractals

We study aperiodic and periodic tilings induced by the Rauzy fractal and its subtiles associated with beta-substitutions related to the polynomial x3-ax2-bx-1 for a≥b≥1. In particular, we compute the corresponding boundary graphs, describing the adjacencies in the tilings. These graphs are a valuable tool for more advanced studies of the topological properties of the Rauzy fractals. As an example, we show that the Rauzy fractals are not homeomorphic to a closed disc as soon as a≤2b-4. The methods presented in this paper may be used to obtain similar results for other classes of substitutions.© 2012 Elsevier B.V. All rights reserved.

A class of cubic Rauzy fractals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fragmentos do pensamento dialético na história da construção das ciências da natureza

Este trabalho tem por objetivo identificar uma possível inclinação das ciências naturais em direção ao materialismo dialético. Para tanto, procura-se apresentar a história da dialética a partir da discussão racionalismo/empirismo moderno e seus desdobramentos até as tendências dialéticos contemporâneas. Os autores discutidos são Kant, Hegel, Marx, Engels, Lenin, Horkheimer, Marcuse, Habermas, Bachelard e suas escolas epistemológicas, completadas por Althusser, Lefebvre e Kedrov. Ao lado desses autores discutem-se outros, das duas últimas décadas, procurando extrair-lhes o olhar dialético, oculto em seus discursos acerca da ciência do fim do século. Também se procura encontrar na mecânica quântica, nos fractais, na lógica para-consistente, nos modelos matemáticos e na biologia antideterminista, argumentos para existência de uma forma de abordagem dialética da natureza. Por último, procura-se refletir acerca dos motivos da resistência ao método dialético apresentado pela maioria dos cientistas ocidentais e, sua possível superação.

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. on the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein. (c) 2005 Elsevier B.V. All rights reserved.

Bifurcation analysis of a new Lorenz-like chaotic system

In this paper we study the local codimension one and two bifurcations which occur in a family of three-dimensional vector fields depending on three parameters. An equivalent family, depending on five parameters, was recently proposed as a new chaotic system with a Lorenz-like butterfly shaped attractor and was studied mainly from a numerical point of view, for particular values of the parameters, for which computational evidences of the chaotic attractor was shown. In order to contribute to the understand of this new system we present an analytical study and the bifurcation diagrams of an equivalent three parameter system, showing the qualitative changes in the dynamics of its solutions, for different values of the parameters. (C) 2007 Elsevier Ltd. All rights reserved.

Fractal analysis of eroded surfaces by digital image processing

Jet impingement erosion test rig has been used to erode titanium alloy specimens (Ti-4Al-4V). Eroded surface profiles have been obtained by vertical sectioning method for light microscopy observation. Mixed fractals have been measured from profile images by a digital image processing and analysis technique. The use of this technique allows glimpsing a quantitative correlation among material properties, fractal surface topography and erosion phenomena. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Fractal analysis along stretch zone for an aluminum alloy

The topography of fracture surface along stretch zone front for Al7050 is analyzed about its fractal behavior and compared against local distributions of microstructural parameters and stretch zone height, considered here as a toughness parameter. Major influence on microscale was presented by precipitation density. Larger grains should be significant on topographic behavior at macroscale, besides the local toughness measured along stretch zone. The large scattering of fractal measurements along specimen width should limit the validity of models relating fractal values and fracture toughness. It is proposed that models based on mixed fractals must also consider some dispersion parameter instead of mean fractal measurements due to the overall complexity of fracture relief formation. It is suggested that sampling for fractal measurement must be restricted to plane strain region along fracture surface, due to smaller scattering in this region. (C) 2004 Elsevier B.V. All rights reserved.

Bioglass Associated With Leukocyte-Poor Platelet-Rich Plasma in the Rabbit Maxillary Sinus: Histomorphometric, Densitometric, and Fractal Analysis

The objective of the present study was to evaluate the outcomes of autogenous bone graft (AB) and bioglass (BG) associated or not with leukocyte-poor platelet-rich plasma (LP-PRP) in the rabbit maxillary sinus (MS) by histomorphometric and radiographic analysis. Twenty rabbits divided into 2 groups (G1, G2) were submitted to sinus lift surgery. In G1, 10 MS were grafted with AB and 10 MS were grafted with BG. In G2, 10 MS were grafted with AB + LP-PRP and 10 MS were grafted with BG + LP-PRP. After 90 days, the animals were killed and specimens were obtained, x-rayed, and submitted to histomorphometric, radiographic bone density (RD) and fractal dimension analysis. Radiographic bone density mean values (SD), expressed as aluminum equivalent in mm, of AB, BG, AB + LP-PRP, and BG + LP-PRP groups were 1.79 (0.31), 2.04 (0.39), 1.61 (0.28), and 1.53 (0.30), respectively. Significant differences (P < 0.05) were observed between BG and AB, and BG + PRP and BG. Fractal dimension mean values were 1.48 (0.04), 1.35 (0.08), 1.44 (0.04), and 1.44 (0.06), respectively. Significant differences were observed between BG and AB, and AB + LP-PRP and BG. Mean values for the percentage of bone inside MS were 63.30 (8.60), 52.65 (10.41), 55.25 (7.01), and 51.07 (10.25), respectively. No differences were found. No correlations were observed among percentage of bone, RD and FD. Histological analysis showed that MS treated with AB presented mature and new bone formation. The other groups showed minor bone formation. Within the limitations of this study, the results indicated that at a 90-day time end point, AB yielded better results than AB + LP-PRP, BG, and BG + LP-PRP and should be considered the primary material for MS augmentation.

On turbulent, erratic and other dynamical properties of Zadeh's extensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamics at infinity and other global dynamical aspects of Shimizu-Morioka equations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Symmetry analysis of an integrable reaction-diffusion equation

In this paper, we investigate the invariance and integrability properties of an integrable two-component reaction-diffusion equation. We perform Painleve analysis for both the reaction-diffusion equation modelled by a coupled nonlinear partial differential equations and its general similarity reduced ordinary differential equation and confirm its integrability. Further, we perform Lie symmetry analysis for this model. Interestingly our investigations reveals a rich variety of particular solutions, which have not been reported in the literature, for this model. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Soliton parameters and chaotic sets

In this work we apply a nonperturbative approach to analyze soliton bifurcation ill the presence of surface tension, which is a reformulation of standard methods based on the reversibility properties of the system. The hypothesis is non-restrictive and the results can be extended to a much wider variety of systems. The usual idea of tracking intersections of unstable manifolds with some invariant set is again used, but reversibility plays an important role establishing in a geometrical point of view some kind of symmetry which, in a classical way, is unknown or nonexistent. Using a computer program we determine soliton solutions and also their bifurcations ill the space of parameters giving a picture of the chaotic structural distribution to phase and amplitude shift phenomena. (C) 2009 Published by Elsevier Ltd.

Low dimensional behavior in three-dimensional coupled map lattices

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)