X chromosome heterochromatic pattern and nucleolar synthesis in pupal ovaries of Aedes aegypti

C-banding and silver-staining techniques were used to examine pupal ovaries of Aedes aegypti from Sao Jose do Rio Preto (Brazil). Silver staining in ovary cystocytes showed two basic patterns relative to the nucleolar morphology: viz (1) a single, compact small body; and (2) multiple bodies encompassing large nuclear areas. These two types of cystocytes were present in the ratio of 7:1, which is the same as the number of nurse cells and oocytes, respectively, in each follicle. This suggests the possibility of eventually using such a nucleolar morphological difference to recognize both cell types in developmental stages before emergence. Silver nitrate staining in metaphase chromosomes revealed centromeric bands on all six chromosomes. The C-banding pattern in metaphase chromosomes showed an intercalary band in one of the X arms, as described previously in other populations. In ovary cystocytes (pachytene stage) this C-positive band seemed to consist of two chromomeres. Phase contrast microscopy showed that the nucleolus was associated with the distal chromomere of this intercalary C-band, indicating that the nucleolus organizer region was located in that part of the heterochromatic band.

Synthesis, Infrared Spectroscopy and Crystal Structure Determination of a New Decavanadate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis of Ba0.5Sr0.5(Ti0.80Sn0.20)O-3 prepared by the soft chemical method

Single-phase Ba0.5Sr0.5(Ti0.80Sn0.20)O-3 (BST:Sn) powders with perovskite structure were prepared by the soft chemical method. Infrared data indicates that the BST:Sn powder is carbonate free while Raman analysis has shown that the transversal (TO) and longitudinal (LO) optical modes tend to disappear with tin addition. The electron diffraction pattern of the BST:Sn powder showed an interplanar distance of 3.94 angstrom characteristic of the pseudo-cubic structure. (c) 2007 Elsevier B.V. All rights reserved.

Structure study of Bi4Ti3O12 produced via mechanochemically assisted synthesis

Nanosized bismuth titanate was prepared via high-energy ball milling process through mechanically assisted synthesis directly from their oxide mixture of Bi2O3 and TiO2. Only Bi4Ti3O12 phase was formed after 3 h of milling time. The excess of 3 wt% Bi2O3 added in the initial mixture before milling does not improve significantly the formation of Bi4Ti3O12 phase comparing to stoichiometric mixture. The formed phase was amorphized independently of the milling time, The Rietveld analysis was adopted to determine the crystal structure symmetry, amount of amorphous phase, crystallite size and microstrains. With increasing the milling time from 3 to 12 h, the particle size of formed Bi4Ti3O12 did not reduced significantly. That was confirmed by SEM and TEM analysis. The particle size was less than 20 nm and show strong tendency to agglomeration. The electron diffraction pattern indicates that Bi4Ti3O12 crystalline powder is embedded in an amorphous phase of bismuth titanate. Phase composition and atom ratio in BIT ceramics were determined by X-ray diffraction and EDS analysis. (c) 2007 Elsevier Ltd. All rights reserved.

Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate

ZrTiO4 (ZT), obtained by the Pechini method, was used as precursor for obtaining PLZT (lead lanthanum zirconium titanate). An aqueous solution of oxalic acid was prepared with particles of ZT, Pb(NO3)(2) and La2O3. After the PbC2O4 and La2O3 precipitate on ZT particles, the materials were calcined and X-ray diffraction (XRD) showed the cubic phase of PLZT. This material was sintered, in two steps, and a density of about 8.0 g/cm(3) was obtained. After the second sintering the XRD pattern showed the occurrence of tetragonal and rhombohedral phases. This was caused by a stoichiometric deviation and the material showed a high optical transparency. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Iron(II) djenkolate: synthesis and properties

Djenkolate complex of iron, [Fe(C(7)H(12)N(2)O(4)S(2))]. H(2)O, has been synthesized by the reaction of potassium djenkolate with Fe(SO(4)). 7H(2)O under nitrogen atmosphere. X-Ray diffraction pattern has been indexed in orthorhombic system with lattice parameters: a=11.24 Angstrom, b=7.50 Angstrom and c=6.96 Angstrom. According to IR spectroscopy, coordination is performed through COO(-) and NH(2) groups. An octahedral geometry for Fe ion is suggested by UV-Vis and Mossbauer spectroscopies. Thermal decomposition leads to the formation of Fe(2)O(3) (hematite). The compound shows poor solubility in water and in common organic solvents. (C) 2000 Elsevier B.V. S.A. All rights reserved.

Thiobacillus ferrooxidans response to copper and other heavy metals: growth, protein synthesis and protein phosphorylation

Respirometric experiments demonstrated that the oxygen uptake by Thiobacillus ferrooxidans strain LR was not inhibited in the presence of 200 mM copper. Copper-treated and untreated cells from this T. ferrooxidans strain were used in growth experiments in the presence of cadmium, copper, nickel and zinc. Growth in the presence of copper was improved by the copper-treated cells. However, no growth was observed for these cells, within 190 h of culture, when cadmium, nickel and zinc were added to the media. Changes in the total protein synthesis pattern were detected by two-dimensional polyacrylamide gel electrophoresis for T. ferrooxidans LR cells grown in the presence of different heavy metals. Specific proteins were induced by copper (16, 28 and 42 kDa) and cadmium (66 kDa), whereas proteins that had their synthesis repressed were observed for all the heavy metals tested. Protein induction was also observed in the cytosolic and membrane fractions from T. ferrooxidans LR cells grown in the presence of copper. The level of protein phosphorylation was increased in the presence of this metal.

Ultrastructure of the gland responsible for the synthesis of an aggregation pheromone in Rhynchophorus palmarum (L.) (Coleoptera: Curculionidae)

The ultrastructure of the glands responsible for synthesizing the aggregation pheromone rhynchophorol in the beetle Rhynchophorus palmarum (L.) was studied. Glands from live beetles were removed and examined under a light microscope using semithin sections (∼1μm) and under a transmission electron microscope (TEM) using ultrathin sections (60 nm). The glands show an alveolar structure without a reservoir and the cells making up the gland are arranged in a typical acinus pattern. The existence of two types of cells with different electron densities, secretion canaliculi, numerous mitochondria and smooth endoplasmic reticulum in abundance were observed. These latter organelles are characteristic of cells which synthetize non-proteinaceous substances and are thus, likely candidates for the producion of rhynchophorol.

Pattern of silver nitrate-staining during meiosis and spermiogenesis in testicular lobes of Antiteuchus tripterus (Heteroptera: Pentatomidae)

The pattern of silver nitrate (Ag)-staining differed among testicular lobes of Antiteuchus tripterus. In general, these differences are in regard to the number, size, shape, coloring intensity, and location of the stained bodies or masses, observed during meiosis and spermiogenesis. These characteristics were similar in lobes 1-3. Lobes 4-6, however, differed from each other and from lobes 1-3 as well. Because the Ag-staining method is specific for nucleolar organizing regions and nucleolar material, the observations in meiosis of lobes 1-3 suggested the presence of a single pair of nucleolar organizing region-bearing chromosomes in A. tripterus, as previously found in other Pentatomidae species. In general, the amount of Ag-stained material seen in meiosis of the testicular lobes 1-3 of A. tripterus is smaller than in the other lobes. The differences among lobes observed during spermiogenesis included a striking variation in morphology of the Ag-stained material found in the head and tail of the spermatids. Given that the key role of the nucleolar material is to participate in protein synthesis, interlobular variations seem to be related to the different functions attributed to each lobe (reproduction to lobes 1-3 and basically nutrition to lobes 4-6). To our knowledge, this is the first time that the nucleolar material was studied in each testicular lobe during spermatogenesis. The present observations encourage further studies since, in addition to being of basic biological interest, several Pentatomidae species are agricultural pests and added knowledge of their biology, mainly in reproduction, may be important for the development of control strategies. ©FUNPEC-RP.

Microwave-assisted hydrothermal synthesis of ZnO powders with different reagents

In this work, zinc oxide powders were synthesized by microwave-assisted hydrothermal method in basic medium. These powders were analyzed by X-ray diffraction (XRD), Field-emisson gum scanning electron microscopy (FEG-SEM), Ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL) measurements. XRD pattern confirmed that the pure ZnO phases were obtained after MH processing performed at 130°C/ 1h. FEG-SEM micrographs reveals that these nanostructures are made up of ZnO plates. UV-vis results were employed to determine the optical band gap these materials. Also, it showed existence of photoluminescence (PL) in the different zinc powders. An orange PL emission when excited by 350 nm wavelength at room temperature was observad in the different powders.

Combining anisotropic diffusion, transport equation and texture synthesis for inpainting textured images

In this work we propose a new image inpainting technique that combines texture synthesis, anisotropic diffusion, transport equation and a new sampling mechanism designed to alleviate the computational burden of the inpainting process. Given an image to be inpainted, anisotropic diffusion is initially applied to generate a cartoon image. A block-based inpainting approach is then applied so that to combine the cartoon image and a measure based on transport equation that dictates the priority on which pixels are filled. A sampling region is then defined dynamically so as to hold the propagation of the edges towards image structures while avoiding unnecessary searches during the completion process. Finally, a cartoon-based metric is computed to measure likeness between target and candidate blocks. Experimental results and comparisons against existing techniques attest the good performance and flexibility of our technique when dealing with real and synthetic images. © 2013 Elsevier B.V. All rights reserved.

Titanate nanotubes produced from microwave-assisted hydrothermal synthesis: Photocatalytic and structural properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Lifespan and reproductive dynamics of the commercially important sea bob shrimp Xiphopenaeus kroyeri (Penaeoidea): synthesis of a 5-year study

Population parameters of the shrimp Xiphopenaeus kroyeri (Heller, 1862) (sex ratio, length-frequency distributions (carapace length, CL), growth, lifespan, size of sexual maturity, spawning and recruitment) were analyzed in a long-term study from January 1998 through June 2003. The data on these parameters were collected and analyzed to test the hypothesis that the main period of juvenile recruitment in the bay coincides with the period of fishery closures currently designated by the Brazilian Institute of Environment and Renewable Natural Resources. Monthly collections were conducted along the southeastern Brazilian coast, using a shrimp fishing boat with “double-rig” nets sampling at stations up to 40 m depth. Sex ratios were female-biased only in zones with high reproductive activity such as in stations deeper than 15 m (χ2 test, p<0.05). The mean size of males and females was 15.3 ± 3.1 mm CL and 16.2 ± 4.7 mm CL, respectively, with size at sexual maturity estimates (CL50) of 14.8 mm for males and 15.5 mm for females. Mean growth curves provided estimates of CL∞ = 29.31 mm, k = 0.009/day, t0=−0.25 and CL∞ = 35.33 mm, k = 0.006/day, t0=−0.23 for males and females, respectively, and average lifespans of 1.35 for males and 2.12 years for females. Recruitment and abundances of reproductive females were highly correlated with the environmental factors such as higher water temperature and finer-grained bottom sediment (canonical correlation, r=0.63, p<0.001). The reproductive peaks in February-April 1998, March-May 1999 and February-May 2002 were followed by recruitment peaks in May-July 1998, July-September 1999 and April-June 2002, respectively. Thus, the proposed period of fisheries closure (March to May) does not coincide with the main recruitment periods observed for X. kroyeri.

Lifespan and reproductive dynamics of the commercially important sea bob shrimp xiphopenaeus kroyeri (penaeoidea): synthesis of a 5-year study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)