Establishment of the epithelial attachment and connective tissue adaptation to implants installed under the concept of "platform switching": a histologic study in minipigs

Aim: To validate the platform switching concept at oral implants with respect to the preservation of the alveolar crestal bone levels in an animal model. Material & methods: Five minipigs received three implants each with a 0.25mm implant/ abutment mismatch and were placed flush (T(0)), 1 mm below (T(1)) and 1 mm above (T(+1)) the alveolar bony crest, and as a control, one conventionally restored implant placed at the bone level. The implants were randomly inserted flapless into the mandible. Four months after implant insertion, the animals were sacrificed, and undecalcified block sections were obtained and used for histological analyses. Results: The mean values for peri- implant bone resorption were 1.09 +/- 0.59mm (Control), 0.51 (+/- 0.27 mm, T(0)), 0.50 (+/- 0.46 mm, T(1)) and 1.30 (+/- 0.21 mm, T (+1)), respectively. Statistically significant differences (P< 0.05) were found among the test (T(0), T(-1)) and the control sites. Control implants presented an average biologic width length of 3.20mm (+/- 0.33), with a connective tissue adaptation compartment of 1.29mm (+/- 0.53) and an epithelial attachment of 1.91 mm (+/- 0.71). T(0), T(1) and T(+1) implants presented with a mean biologic width of 1.97mm (+/- 1.20), 2.70 mm (+/- 1.36) and 2.84mm (+/- 0.90), respectively, with a connective tissue adaptation compartment of 1.21mm (+/- 0.97), 1.21 mm (+/- 0.65) and 1.50 mm (+/- 0.70) and an epithelial attachment of 0.84 mm (+/- 0.93), 1.66 mm (+/- 0.88) and 1.35 mm (+/- 0.44), respectively. Differences between the configurations were mainly associated with the length of the epithelial attachment. The epithelial attachment was significantly longer in the C sites than in T(0) (P = 0.014). However, no other differences between configurations were detected. Conclusion: If the implants are positioned at the level of the alveolar bony crest, the platform switching concept may have a minor impact on the length of the epithelial attachment (0.84 vs. 1.91 mm), while the connective tissue adaptation compartment remains relatively unaffected. Moreover, platform switching resulted in less resorption of the alveolar crest (0.58 mm).

A unity power factor multiple isolated outputs switching mode power supply using a single switch

The authors present an offline switching power supply with multiple isolated outputs and unity power factor with the use of only one power processing stage, based on the DC-DC SEPIC (single ended primary inductance converter) modulated by variable hysteresis current control. The principle of operation, the theoretical analysis, the design procedure, an example, and simulation results are presented. A laboratory prototype, rated at 160 W, operating at a maximum switching frequency of 100 kHz, with isolated outputs rated at +5 V/15 A -5 V/1 A, +12 V/6 A and -12 V/1 A, has been built given an input power factor near unity.

On the equivalence of the mechanisms governing switching and hysteresis phenomena

The nucleation and growth model, which is usually applied to switching phenomena, is adapted for explaining surface potential measurements on the P(VDF-TrFE) (polyvinylidene fluoride-trifluoroethylene) copolymer obtained in a constant current corona triode. It is shown that the growth is one-dimensional and that the nucleation rate is unimportant, probably because surface potential measurements take much longer than the switching ones. The surface potential data can therefore be accounted for by a growth model in which the velocity of growth varies exponentially with the electric field. Since hysteresis loops can be obtained from surface potential measurements, it is suggested that similar mechanisms can be used when treating switching and hysteresis phenomena, provided that account is taken of the difference in the time scale of the measurements.

Efeito da época de colheita e da calagem no rendimento de sementes comercializáveis de amendoim cv. Botutatu

A field experiment was carried out to study the effects of liming and time of harvesting on peanut cv. Botutatu (Arachis hypogaea L.) seed yield and yield components in the period of July, 1991 to February, 1992, in São Manuel, State of São Paulo. The soil was a Dark Red Latosol (Hapludult, sandy loam), and the experimental design was a subplot replicated four times in completely randomized blocks. Lime levels (0.0 and 1.75 t/ha) were applied in the plots, and the subplots were nine weekly harvests, starting at 87 days after planting (DAP). There was no effect of lime on hulls or seed yield and on peanut yield components. The germination of seeds in hulls was incresead at each harvest and was lower at lime presence. The highest yield was observed at 129 DAP.

Efeitos da adubação com manipueira sobre o rendimento e qualidade dos frutos de tomate

The objective of this research was to evaluate the residue from cassava, known as manipueira, as an alternative for tomato (Lycopersicon esculentum) fertilization. This experiment was carried out in UNESP with the cultivar Rio Grande. The experimental design was a completely randomized blocks in a 3 × 3 factorial arrangement with five blocks. Treatments constituted the following: 1) witness; 2) 54 m3/ha of manipueira; 3) 108 m3/ha of manipueira; 4) half recommended mineral fertilization; 5) half recommended mineral fertilization + 54 m3/ha of manipueira; 6) half recommended mineral fertilization + 108 m3/ha of manipueira; 7) recommended mineral fertilization; 8) recommended mineral fertilization + 54 m3/ha of manipueira and 9) recommended mineral fertilization + 108 m3/ha of manipueira. Tomato yield, number of fruits per plant, fruit diameter and lenght, total soluble solids (TSS), total titratable acidity (TTA) and the ratio TSS/TTA were evaluated. The results obtained indicated that manipueira contributed significantly to yield and quality of pos-harvested tomato fruits.

New family of zero-current-switching PWM converter

A new family of dc-to-dc pulse-width-modulated (PWM) converters is presented. These converters feature soft-commutation at zero-current (ZC) in the active switches. The new ZCS-PWM Boost and new ZCS-PWM Zeta converters, both based on the new ZCS-PWM soft-commutation cell proposed, are used as examples to illustrate the operation of the new family of converters.

Influência de cinco temperaturas de secagem no rendimento e composição do óleo essencial de citronela (Cymbopogon winterianus Jowitt)

The Influence of Drying Temperatures on the Yield Composition of Citronella (Cymbopogon winterianus Jowitt) essential oil. The studies were carried out to establish more precise parameters for citronella (C. winterianus Jowitt) post-harvest, and to optimize drying time and essential oil quantitative/qualitative yield. Five treatments were designed (30°C, 40°C, 50°C, 60°C and 70°C), with 14 repetitions of the drying process and 12 of the essential oil extraction. Drying at 60°C gave the best results for drying time (48 hours until weight stabilization), and also for extracted oil quantity (1.228 ± 0.127% over dry weight). Essential oil content showed high quantitative variations. The main compound found was neral, except in the 50°C treatment, where citronelal was the main compound.

Modeling of pre-regulator boost ZCS interleaved operating in critical conduction mode and with high power factor

This paper presents a new pre-regulator boost operating in the boundary area between the continuous and discontinuous conduction modes of the boost inductor current, where the switches and boost diode performing zero-current commutations during its turn-off, eliminating the disadvantages related to the reverse recovery losses and electromagnetic interference problems of the boost diode when operating in the continuous conduction mode. Additionally, the interleaving technique is applied in the power cell, providing a significant input current ripple reduction. It should be noticed that the main objective of this paper is to present a complete modeling for the converter operating in the critical conduction mode, allowing an improved design procedure for interleaved techniques with high input power factor, a complete dynamic analysis of the structure, and the possibility of implementing digital control techniques in closed loop.

Ferroelectric switching and dielectric response of P(VDF-TrFE)/PMMA blends

The ferroelectric and the dielectric behaviors of binary blends formed by an equi-molar Poly(vinylidene fluoride trifluoroethylene) copolymer [P(VDF-TrFE)] and Poly(methyl methacrylate) [PMMA] were investigated, for several PMMA compositions. For 40 wt.% or more PMMA contents, the blends are completely amorphous. Below this value, they crystallize in the usual Cm2m polar structure of P(VDF-TrFE). The ferroelectric switching characteristics and the dielectric response of the blends demonstrate the formation of dynamically stable ferroelectric domains. Moreover, the blended films are highly transparent in the optical region. Therefore, thin films of these binary blends are good candidates as host materials for nonlinear optical applications.

Rendimento de óleo essencial de Salvia officinalis L. sob ação de reguladores vegetais

This study aimed to evaluate the effect of different plant growth regulators on essential oil yield in Salvia officinalis L. plants. The experiment was held in a greenhouse and the experimental design was completely randomized, with 5 treatments and three replications. The Treatments consisted in the application of gibberellic acid (GA3), benzylaminopurine (BAP), 2-chloroethyl phosphonic acid (ethephon), and Stimulate at 2%, compared with control plants (water). Applications of plant growth regulators were performed in three consecutive periods, in turn, 15, 25 and 35 days after transplanting of seeding germinating in the light at 25°C. The dry mass yield of the aerial part and the oil essential content were determined 131 days after the transplant. The aerial part of the plants was dried in an oven at 35°C; after dry mass determination, the oil was extracted by hydrodistillation and its volume was determined. Plants treated with GA 3 and Stimulate showed increase in essential oil content, while plants treated with BAP and ethephon showed decrease in essential oil volume when compared with the control plants.

Rendimento dos não-componentes da carcaça de cordeiros de diferentes genótipos

Non-carcass components percentages of lambs terminated in confinement, fed with diet containing 40:60 forage:concentrate ratio were influenced by lambs' breed (Morada Nova and 1/2 Somális Brasileira 1/2 Morada Nova), except for the liver, without difference between pure and crossbred animals, with average values of 2.29% and 0.35%, respectively. Crossbred lambs had higher percentages of skin (8.96%), head plus foot (10.68%), heart (0.88%), and kidney (0.93%) than purebred lambs (7.15%, 9.69%, 0.56% and 0.35%, respectively).

Rendimento e composição química do filé de prochilodus lineatus do rio mogi guaçu, Brasil

The curimbata constitutes species of fish of wide distribution in the Neotropical area and high economic value. This work focused to evaluate processing yield and the chemical composition of the fillet in the male and female migratories and residents stocks of Prochilodus lineatus. The using the plotting was completely randomized by 4x2 factorial scheme, having as factors four stocks (one resident and three migratories) and two genders (male and female) with thirty replicates, considering each fish as an experimental unit. Each individual was submitted to the manual filleted and determination of the corporal composition (texts of moisture, crude protein, lipids, ashes and energy). They following parameters of yield had been evaluated (%): visceral entire fish (RPIE %); yield of boneless fillet (RFILE %) and processing yield of fillet with bone (RFILEC %). There was a significant difference (p<0.05) between the stocks and the studied samples. The biggest yield of boneless fillet were observed for the fish of the migrator stock I (45.77%). Males and females of the migrator stock I presented biggest fillet yield (46.79% and 43.93%, respectively), while the migrator III presented smaller yield (37.29% for males and 38.44% for females). The migratories stocks I, II and III presented values significantly smaller (p<0.05) of lipids level (0.98%; 2.01% and 1.97%, respectively) and an increase in the content of corporal protein in relation to the resident stock. It concluded that the male weighing 591g on average, belonging of the stock migrator I (captured in December), presented better thread yield and the stocks migratories are fish that has low fat tenor and high protein tenor.

Photoelastic comparison of single tooth implant-abutment-bone of platform switching vs conventional implant designs

Objectives: The maintenance and stability of peri-implantar soft tissue seem to be related to the crestal bone around the implant platform and different implant designs connections might affect this phenomenon. The aim of this study was to evaluate by photoelastic analysis the stress distribution in the cervical and apical site of implant-abutment interface of conventional implant joints (external hex, internal hex and cone morse) and compare to the novel platform switching design. Materials and methods: It was fabricated photoelastic models using five different implant-abutment connection, one set of external hex (Alvim Ti, Neodent, Curitiba, Brazil), one set of internal hex (Full Osseotite, Biomet 3i, Florida, USA), one cone morse set (Alvim CM, Neodent, Curitiba, Brazil), and two sets of internal hex plus platform switching concept (Alvim II Plus, Neodent, Curitiba, Brazil) (Certain Prevail, Biomet 3i, Florida, USA). These models were submitted to two compressive loads, axial from 20 kgf (load I) and another (load II), inclined 45° from 10 kgf. During the qualitative analysis, digital pictures were taken from a polariscope, for each load situation. For the quantitative analyses in both situations of load, the medium, minimum and maximum in MPa values of shear strain were determined in the cervical and apical site. The Kruskal-Wallis test was used to compare the results between the different systems and between cervical and apical site were compared using Mann-Whitney U test. Results: The results from qualitative analysis showed less concentration of strain in the cervical area to the internal hex plus platform switching (Certain Prevail), in both situation of load. The same results were get in the quantitative analysis, showing less stress concentrations around the implant Certain Prevail with internal hex plus the novel design (17.9 MPa to load I and 29.5 MPa to load II), however, without statistical significant difference between the systems. Conclusion: The minor stress concentration strongly suggest the use of platform switching design as a manner to prevent bone loss around the implant-abutment platform. Clinical Significance: From the result of this study its possible to make clinical decision for implant system which provides implant components with platform switching characteristics.

A comparison of performance indexes in DC-DC converters under different stabilizing state-dependent switching laws

This paper deals with the problem of establishing stabilizing state-dependent switching laws in DC-DC converters operating at continuous conduction mode (CCM) and comparing their performance indexes. Firstly, the nature of the problem is defined, that is, the study of switched affine systems, which may not share a common equilibrium point. The concept of stability is, therefore, broadened. Then, the central theorem is proposed, from which a family of switching laws can be derived, namely the minimum law and the hold state law. Some of these are proved to stabilize the basic DC-DC converters and then, their performances are compared to another law, from a previous work, by simulation, where a great reduction in overshoot is obtained. © 2011 IEEE.