Influência das culturas láticas no índice de proteólise do queijo minas frescal

Estudou-se, a influência de culturas láticas no índice de proteólise do queijo Minas Frescal, processado com leite não pasteurizado e pasteurizado. O emprego de culturas láticas na elaboração de queijo Minas Frescal pode ser indicado, uma vez que o índice de proteólise só se correlacionou com o tempo de conservação.

NEW YEAST STRAINS FOR ALCOHOLIC FERMENTATION AT HIGHER SUGAR CONCENTRATION

New yeast strains for alcoholic fermentation were isolated from samples collected from Brazilian alcohol factories at the end of the sugar cane crop season. They were selected by their capacity of fermenting concentrated sugar cane syrup as well as high sucrose concentrations in synthetic medium with a conversion efficiency of 89-92%. The strains were identified as Saccharomyces cerevisiae.

Correlation between acidic ninhydrin and HPLC methods to evaluate fraudulent addition of whey in milk

The acidic ninhydrin spectrophotometric method (ANSM) for quantitative determination of free and bound sialic acid of milk glycoprotein has been proved to be fast and efficient for routine detection of fraudulent addition of rennet whey to fluid milk. In this research the ANSM was compared with the high performance liquid chromatography (HPLC) method, internationally recommended for caseinomacropeptide (CMP) determination, which besides its high accuracy is more sophisticated and requires trained personnel. For several sample conditions (raw milk and milk with variable added amounts of rennet cheese whey), the methods showed an excellent linear correlation, with r = 0.981 when milk was deproteinized with a 120 g.L-1 final concentration of trichloroacetic acid (TCA) concentration. The best correlations could be seen with final concentrations of 100 g.L-1 and 80 g.L-1 TCA; respectively, r = 0.992 and 0.993.

Thermodynamic analysis of the cogeneration system expansion in a sugar-alcohol factory

In this work it was performed energetic and exergetic analyses of three thermal plants to assessment a cogeneration system in expansion of a sugar-alcohol factory. The initial configuration considered is constituted by a low pressure steam generator, single stage steam turbines for electricity generation and crusher, shredder and mills with mechanical driving. In the intermediary configuration, the low pressure steam generator was substituted by another which generates steam at higher pressure and higher temperature, the steam turbines for electricity generation were substituted by a multiple stages extraction-condensation turbine and the other steam turbines were maintained. The final configuration consists in the substitution of these last turbines by electrical motors. Thermodynamic analyses were performed to evaluate the equipment and the overall plants efficiencies to permit a comparison among the plants. Besides of this, some important parameters of the sugar-alcohol factories were calculated.

Demonstration of the cellular viability and safety of Enterococcus faecium CRL 183 in long-term experiments

Enterococcus faecium CRL 183, a strain isolated from NSLAB cheese starter, has been the focus of much research on its potential probiotic capacity, although its survival through the gastrointestinal tract has not been demonstrated so far. In order to determine the capacity of E. faecium CRL 183 to survive such conditions, this strain was administered daily to rats for 30 weeks. The experimental animals were divided into Group I: those that did not receive E. faecium, Group II: those that received a pure culture of E. faecium CRL 183 and Group III: animals that received E. faecium CRL 183 in the form of a fermented soy-based product. Faecal samples were collected at the beginning and at the 50%, 75% and 100% stages of the experimental period. Isolation and counts of Enterococcus were carried out on KF selective media. To distinguish the various Enterococcus species in the faeces, biochemical (API Strep 20) and molecular (PCR) tests were performed. Initially, E. faecium was absent from the intestinal flora of the rats; however, after 15 weeks of administration, E. faecium could be recovered from the faeces of Groups II and III, demonstrating that E. faecium CRL 183 was able to survive gastrointestinal transit under the study conditions. This is further evidence of the probiotic qualities of this strain. The safety of the strain was also investigated with regard to body weight and serum biochemical analysis.

Genetic Parameters For the Somatic Cells Count In the Milk of Buffaloes Using Ordinary Test Day Models

The buffaloes dairy milk production (BDMP) has increased in the last 20 years, mainly for the manufacturing of mozzarella cheese, which is recognized by its high nutritional quality. However, this quality can be affected by several factors i. e. high somatic cells count (SCC) provokes changes in the milk's constituents. As in bovine dairy milk, the SCC is used as diagnostic tool for milk quality; because it enables the diagnosis of sub-clinic mastitis and also allows the selection of individuals genetically resistant to that disease. Based on it, we collected information about SCC and BDMP along the lactation in Murrah breed buffaloes, during the period between 1997 and 2005. Curves were designed to estimate genetic parameters. These parameters were estimated by ordinary test-day models. There were observed variations in the estimated heritability for both characteristics the lowest score for somatic cells count (SSCC) was seen at first month (0.01) and the highest at sixth months (0.29 the genetic correlation between these traits varied from -1 at the 1 and 9(th) months to 0.31 and 0.30 in the2 and 4(th) month of lactation. Phenotypic correlations were all negative (-0.07 in the second month and up to -0.35 in the eighth month of lactation). These results showed that environmental factors are more important than genetics in explain SCC, for this reason, selection for genetic resistance to mastitis in buffalos based in SCC should not be done. In the other hand, negative phenotypic correlations demonstrated that as the SCC increased, the milk production decreased.

New CP violation in neutrino oscillations

Measurements of CP-violating observables in neutrino oscillation experiments have been studied in the literature as a way to determine the CP-violating phase in the mixing matrix for leptons. Here we show that such observables also probe new neutrino interactions in the production or detection processes. Genuine CP violation and fake CP violation due to matter effects are sensitive to the imaginary and real parts of new couplings. The dependence of the CP asymmetry on the source-detector distance is different from the standard one and, in particular, enhanced at short distances. We estimate that future neutrino factories will be able to probe in this way new interactions that are up to four orders of magnitude weaker than the weak interactions. We discuss the possible implications for models of new physics. ©2001 The American Physical Society.

Comparative field test between two sugar cane (Saccharum spp.) harvesters under two different operational conditions in Brazil

The sugar cane crop is one of the main products in Brazil and according to several authors can generate, besides the industrialized stalks, an amount of crop residues from the order of 15 to 30 % in weight of the aerial part of the plants, depending on the field conditions. The sugar cane area in Brazil is around 5.5×106 hectares, with an amount of 400.106 tons of stalks, with stalks yield of 72 tons.ha-1. This study took place in a sugar cane plot (Latitude 22°46'S, Longitude 47°23'W and 600m of altitude) with 3% of slope, located in São Paulo State. The sugar cane variety was SP 80-1816, in its forth cut, 11 months old and with a planted row spacing of 1.40 m. By other side, several sugar mills are bringing the crop residue to their patio to produce energy with the bagasse. One choice is to bring the crop residue at the same moment with the stalks, avoiding the next operation of baling it. The objective of this study was to analyze some operational parameters of two different sugar cane harvesters under the same field conditions, which was divided in four treatments: T1 = CAMECO CHT2500B operating normally; T2 = CAMECO CHT2500B operating without the cleaning system; T3 = CASE 7700 operating normally; T4 = CASE 7700 operating without the cleaning system. The results obtained were: Table presented CEB = Gross effective capacity; CEL = Net effective capacity. The conclusion is that under normal operation the CASE harvester worked better then CAMECO in the parameters CEL stalks and Manipulation efficiency. And without the cleaning system operating CASE also worked better in the parameters of CEB raw material, CEB stalks, CEL raw material and CEL stalks.

Sugar cane (Saccharum spp.) crop residue baling for energy purposes in Brazil

The sugar cane crop according to several authors can generate, besides the industrialized stalks, an amount of crop residues from the order of 15 to 30% in weight of the aerial part of the plants, depending on the field conditions. The sugar cane area in Brazil is around 5.5×106 hectares, with an amount of 400.106 tons of stalks, with stalks yield of 72 tons.ha-1 (Unica, 2005). This study took place in a sugar cane plot (Latitude 22°46'S, Longitude 47°23'W and 600m of altitude) with 3% of slope, located in São Paulo State. The sugar cane variety was SP 80-1816, in its forth cut, 11 months old and with a planted row spacing of 1.40m. By other side, several sugar mills are bringing the crop residue to their patio to produce energy with the bagasse. One way for that is the baling operation to bring the crop residue at the sugar mill. Some fundamental variables were obtained to define the best set of machines to work with in sugar cane crop residue removal in the baling system among the studied ones, some of the variables were: Soil Index (T1 = 0.83%, T2 = 0.46%, T3 = 0.65%, T4 = 0.57%); Energy Efficiency (T1 = 82.48%, T2 = 83.88%, T3 = 82.83% and T4 = 82.97%) of the system and Effective Cost for Equivalent Energy in US$.EBP-1 (T1 = 11.10, T2= 10.46, T3 = 11.47 and T4 = 10.57) of the baled trash delivered at the sugar mill.

Kappa-casein gene study with molecular markers in female buffaloes (Bubalus bubalis)

Caseins comprise make up about 80% of the total protein content of milk and present polymorphism with change in the amino acid sequence. Within this abundance of proteins, kappa-casein is noteworthy, since it has been associated with differences in milk yield, composition and processing. The objective of this study was to observe the existence of polymorphism in the kappa-casein gene in female buffaloes. For this purpose, blood samples from 115 female buffaloes, collected with vacutainer by needle punctionure of the jugular vein, were used. for genomic DNA extraction was done from blood samples. The PCR-RFLP and SSCP techniques demonstrated that the studied animals were monomorphic for the kappa-casein gene. Only allele B was observed in these animals, which was present in homozygosis. Therefore, it was not possible to quantify the gene action on milk yield and its constituents. The monomorphism observed in the population studied would allow the development of a method to identify mixtures of cow and buffalo milk in mozzarella cheese production, especially because, in cattle, the kappa-casein gene is polymorphic. Copyright by the Brazilian Society of Genetics.

Aspectos físico-químicos e microbianos do queijo maturado por mofo obtido da coagulação mista com leite de cabra congelado e coalhada congelada

Milk goats are indicated as an economic alternative for small farmers and cheese making could improve their profits. Goat's milk has a seasonal production characteristic and shows periods of abundance and others of scarcity. The use of frozen milk or frozen curd to make cheese can be used to solve the problem. The aim of this work was to evaluate the preparation of cheese made from mixed curd and ripened by Penicillium candidum mould using slow frozen milk (in a domestic freezer) or fast frozen milk (by liquid nitrogen). The slow frozen curd and fast frozen curd without whey were used. It was observed that the cheese from the slow and fast frozen milk and from the slow and fast frozen curd did not differ from the control cheese for the yield, chemicophysical characteristics, chemical composition, extention ripened rate, depth ripened rate and microbiological aspects, even when it was expressed as a dry matter content of cheeses.

How the delphi and AHP methods are aiding to define the critical success factors priorities in a digital factory project implementation

Digital factory is a concept that offers a collaborative approach to enhance product and production engineering processes through simulation. Products, processes and resources are modeled to be used to develop and test the product conception and manufacturing processes, before their use in the real factory. The purpose of this paper is to present the steps to identify the Critical Success Factors (CSF) priorities in a digital factory project implementation in a Brazilian company and how the Delphi and AHP Methods are aiding to identify these CSF priorities. Copyright © 2008 SAE International.

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Caracterização de requeijão cremoso potencialmente prebiótico pela adição de inulina e proteína de soja

Requeijão is a typical Brazilian cheese and exhibits a significant consumption in the domestic market and presents high potential for functional foods. In this study the physicochemical characterization of requeijão cheese added of dairy cream, hydrogenated vegetal fat, soy protein isolate and inulin was carried out. For the requeijão cheese making it was used: Lactic mass, sodium chloride, melting salt, starch, whey protein concentrate, xanthan gum, nisin and water. Dairy cream (2.0; 4.0 and 6.0%), hydrogenated vegetable fat (6.0; 8.0 and 10.0%), soy protein isolate - SPI (0.5; 1.0 and 1.5%) and inulin (3.8; 5.05 and 6.3%) were added, according to the trial. The formulated products presented 6.26 to 6.38 of pH value, 0.24 to 0.39% of acidity, 7.29 to 10.04% of protein, 1.62 to 1.77% of ashes, 12.5 to 21.3% of fat, 39.8 to 66.1% of fat dry matter and 28.63 to 35.56% of total solids. The developed requeijão cheeses added of soy protein isolate and inulin are feasible alternatives for healthy foods and potentially prebiotics.

Modelos matemáticos para o problema integrado de dimensionamento de lotes e corte de estoque undimensional

Pós-graduação em Matemática - IBILCE