A randomized controlled trial of homeopathic treatment of weaned piglets in a commercial swine herd

Aim: To evaluate the zootechnic performance and occurrence of diarrhea in piglets in the week post-weaning comparing supplementation with sucrose saline which contained or did not contain added homeopathic medicine.Method. Animals were randomly divided into three groups of 24 piglets each. The control group did not receive any treatment. Another group received sucrose saline, and the third group received sucrose saline with homeopathic medicine added, in the period of zero to seven days post-weaning. The homeopathic treatment consisted of Echinacea angustifolia, Avena sativa, Ignatia amara, Calcarea carbonica, all 6cH. Piglets were weighed daily for weight gain or loss, and observed for diarrhea and feed intake.Results: Animals receiving sucrose saline alone and sucrose saline with homeopathy had less weight loss than control (p = 0.017, p = 0.0001 respectively). There was no statistical difference in relation to overall incidence of diarrhea or food consumption. These data suggest that the supplementation with sucrose saline with added homeopathic medicine in the first seven days post-weaning may be an useful option to reduce weight loss in weaned piglets. Homeopathy (2008) 97, 202-205.

Severe forms of neurocysticercosis: Treatment with albeimdazole

Study of 22 patients with the severe form of neurocysticercosis treated with albendazole (ABZ) administered in 6 different schedules ranging from 15 to 30 mg/kg/day for 21 to 60 days. Dextrochloropheniramine and ketoprofen were the adjuvant drugs Multiple symptoms were observed in 90 9% of patients. Intracranial hypertension was manifested in 90.9%. Hydrocephaly occurred in 86.4%. Evolution was satisfactory in 10 patients, 8 died and 4 had sequelae. Tomographic studies showed the appearance of an isolated IVth ventricle in 9 patients, after ventriculoperitoneal shunt, before ABZ treatment in 3 of them, during in 5 and after treatment in one. Median clinical follow-up duration was 10 months for the patients who died and 3-4 years for survivors. In 3 patients there was an increase in cyst size during the administration of the 15 mg/kg/day ABZ dose, which was not observed in any patient when the 30 mg/kg/day dose was used.

Long-term effect of prolactin treatment on glucose-induced insulin secretion in cultured neonatal rat islets

Insulin secretion and 45SCa2+ uptake and efflux were studied in neonatal rat islets maintained in culture for 7 or 19 days in the absence or presence of prolactin (PRL). Insulin secretion in response to glucose (G), leucine (Leu), arginine (Arg) and carbachol (Cch) was augmented after 7 and 19 days in culture, compared to basal secretion (G 2.8 mM), in both PRL- treated and control islets. However, the increase in insulin secretion induced by the above secretagogues was higher in islets cultured in the presence of PRL for 19 days. In PRL-treated islets, the 45Ca2+ content after a 5 min incubation in the presence of G, Leu, Arg and Cch was significantly higher than the control only in islets cultured for 19 days. Except with Arg, the 45Ca2+ uptake in PRL-treated islets after a 90 min incubation was also significantly higher than the control only in islets cultured for 19 days. Finally, Leu-induced alterations in the 45Ca2+ efflux were higher in PRL-treated than in control islets cultured for 7 or 19 days. In the absence of external Ca2+, the reduction in 45Ca2+ efflux induced by glucose was also significantly higher in PRL-treated than in control islets. This effect was slightly potentiated after 19 days in culture. These data further support the hypothesis that PRL treatment enhances maturation of the secretory mechanism in neonatal islets. This effect can be potentiated even more if the treatment is prolonged.

Influence of heat treatment on LiNbO3 thin films prepared on Si(111) by the polymeric precursor method

The effects of heat-treatment temperature on LiNbO3 thin films prepared by the polymeric precursor method were investigated. The precursor solution was deposited on Si(111) substrates by dip coating. X-ray diffraction and thermal analyses revealed that the crystallization process occurred at a low temperature (420 °C) and led to films with no preferential orientation. High-temperature treatments promoted formation of the LiNb3O8 phase. Scanning electron microscopy, coupled with energy dispersive spectroscopy analyses, showed that the treatment temperature also affected the film microstructure. The surface texture - homogeneous, smooth, and pore-free at low temperature - turned into an `islandlike' microstructure for high-temperature treatments.

Effect of thermal treatment on the morphology of PLZT thin films prepared from polymeric precursor method

Lead lanthanum zirconate titanate (PLZT) thin films with (9/65/35) stoichiometry were prepared by dip coating from polymeric precursor method. The films deposited on silicon (100) substrates, were thermally treated from 450° to 700°C for 6 hours in order to study the influence of thermal treatment on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction results showed that PLZT phase crystallizes at low temperature (500°C) and present preferential orientation. It was observed by scanning electron microscopy (SEM) that it is possible to obtain dense thin films at temperatures around 650°C. The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by the annealing temperature.

Effects of thermal treatment on phase transitions and on the mechanical relaxation in poly(vinylidene fluoride)

This work reports on the effects from thermal treatment in poly(vinylidene fluoride), PVDF, obtained with differential scanning calorimetry (DSC) and dynamic thermal analysis (DMA) measurements. It is shown that in successive DMA measurements performed with one sample the α relaxation peak almost disappears while the γ′ peak appears. The α relaxation peak, at ∼100°C in DMA measurements, is attributed to the preferential orientation of chains in the amorphous phase while the γ′ relaxation peak, at ∼50°C, is related to the thermal treatment to which the sample was submitted.

Efficacy of homeopathic treatment against natural infection of sheep by gastrointestinal nematodes.

The efficacy of the homeopathic treatment with the Fator Vermes, administered according to the manufacturer's recommendations, was evaluated against gastrointestinal nematodes infections in sheep. The experiment was divided into two phases: in the first phase (January/06/2004 to April/30/2004), the animals of the treated (n=10) and control (n=10) groups were treated individually with conventional anthelmintics to avoid deaths. In the second phase (April/30/2004 to July/06/2004), the sheep from the group that received the Fator Vermes were treated as they had been in the previous phase, while the control group animals were treated with conventional anthelmintics at 14 day intervals. In the first phase of the experiment, there was no significant difference (P>0.05) between group means regarding egg counts in feces (EPG), weight gain, or packed cell volume (PCV). Meanwhile, in the second phase, the control group sheep had a significantly higher weight gain, higher PCV values, and lower EPG counts. Infective larvae of Haemonchus spp., Trichostrongylus spp., Cooperia spp., and Oesophagostomum spp. were identified in the fecal cultures. After six months of daily treatment with the Fator Vermes, it was not possible to substantiate the product's benefits in both sheep health and productivity or in the prophylaxis of gastrointestinal nematode infections.

Effect of thermal treatment under oxygen atmosphere on the superconducting properties of RuSr2GdCu2O8

The discovery of the spatial uniform coexistence of superconductivity and ferromagnetism in rutheno-cuprates, RuSr2GdCu2O8 (Ru-1212), has spurred an extraordinary development in the study of the competition between magnetism and superconductivity. However, several points of their preparation process and characterization that determine their superconductive behavior are still obscure. The improvement of sample preparation conditions involves some thermal treatments in inert atmosphere. The first treatment results in the immediate formation of Sr2GdRuO 6. Using the CuO composition as a precursor, we produced Ru-1212. To turn it metallic and superconductor, besides the previous treatment, a final sinterization is carried out in oxygen flow for several days. Three Ru-1212 samples were produced by varying the last sinterization time (two, four, and six days under oxygen flow). Through measurements of x-ray diffraction, scanning electron microscopy, differential thermal analysis, magnetic susceptibility and mechanical spectroscopy, it was studied the influence of the treatments under oxygen atmosphere on the structural and superconducting properties of the material.

Effect of milk treatment on acidification, physicochemical characteristics, and probiotic cell counts in low fat yogurt

The effect of milk treatment (heat, high hydrostatic pressure - HHP, or combined heat and HHP) on acidification, physicochemical characteristics, and probiotic cell counts in low fat yogurt was studied. All samples were analyzed for fermentation time, pH, titratable acidity, total solids, water-holding capacity, syneresis, Hunter L*, a*, and b* values, Streptococcus thermophilus, Lactobacillus delbrueckii ssp bulgaricus, L. acidophilus, and Bifidobacterium longum. The application of HHP combined with thermal treatment resulted in yogurt gels with attractive physicochemical characteristics and high water-holding capacity. In addition to this, the milk treatment did not affect the probiotic bacteria growth. The balance of strains in the starter culture and level of inoculation influenced the yogurt fermentation and properties. The use of combined heat and HHP to treat milk before yogurt fermentation could be an alternative process for obtaining high quality, additive-free healthy products.

Influence of bleaching treatment on flexural resistance of hybrid materials.

The aim of this study is to evaluate the flexural resistance of three types of restorative materials: compomer (Freedom), resin-modified glass-ionomer (Vitremer) and composite resin (Esthet-X), observing whether the application of bleaching agent can cause alterations of their flexural properties. Sixty samples were made using a 10 x 1 x 1 mm brass mold, and divided into three groups: G1- Freedom (SDI); G2- Vitremer (3M ESPE); G3- Esthet-X (Dentsply). On half of the samples of each group (10 samples) the bleaching treatment was applied and the other half used as control, was stored in distilled water at a temperature of 37 degrees C. Whiteness HP Maxx bleaching system was applied on the sample surface following the manufacturer's recommendations, simulating the bleaching treatment at the clinic. After this period, a flexural strength (three-point bending) test was conducted using (EMIC DL 1000) machine until the samples fractured. The data were submitted to ANOVA and Tukey tests. Of the restorative materials studied, G3-(87.24 +/- 31.40 MPa) presented the highest flexural strength, followed by G1-(61.67 +/- 21.32 MPa) and G2-(61.67 +/- 21.32 MPa). There was a statistical difference in flexural strength after the bleaching treatment. It was concluded that the use of a beaching agent can promote significant alteration of the flexural strength of these restorative materials.

Effect of periodontal treatment on the incidence of preterm delivery: a systematic review.

Preterm birth is a major problem in public health in developed and developing countries and the search for risk factors of this event is important. The aim of this study was to review the effect of periodontal treatment on the incidence of preterm delivery. A wide research was executed considering an evaluation period between November of 1998 and October of 2009 at MEDLINE/PUBMED databases. The selection strategy consisted of the search for the following key-words: periodontal therapy or periodontal disease and pregnancy outcome or preterm birth. The search was limited for articles written in English. The randomized clinical trials that evaluated the effect of the non-surgical periodontal treatment on the incidence of Preterm Low Birth Weight (PLBW) were selected. In a total of 7 papers selected, the incidence of PLBW was lower in groups of women who were submitted to periodontal treatment. Reductions of Preterm Birth (PTB) ranged from 0.8% to 28.01%, while reduction of Low Birth Weight (LBW) ranged from 0.44% to 33%. In studies that analyzed these two variables together, there was variation between 4.57% to 71.5% in rates reduction. Due to heterogeneity of the data, the meta-analysis was not applied. The majority of the studies concluded that non-surgical periodontal treatment in pregnant women reduces incidence of preterm babies with low weight.

Use of LH or eCG in the last day of superestimulatory treatment

In the last decades several hormonal treatments to induce multiple ovulation and embryo transfer (MOET) have been developed. Tight control of the time of ovulation allowed the use of fixed-time artificial insemination (FTAI) in embryos donors, facilitating animal management. Although, protocols that allow FTAI have evolved and yield as much embryo as conventional protocols that requires estrus detection, substantial increase in viable embryo production has not been observed in superestimulated bovine cattle. The present mini-review put emphasis on superstimulatory protocols in which the last two doses of pFSH are replaced by eCG or LH. Recent results indicate that an extra LH stimulus (using eCG or LH), on the last day of P-36 superestimulatory treatment, seems to improve transferable embryo yield in both Bos taurus and Bos indicus cattle.

Effects of surface treatment, hydration and application method on the bond strength of a silorane adhesive and resin system to dentine

Objectives: To evaluate the effects of surface treatment, surface hydration (SH) and application method (AM) on the tensile bond strength of the Silorane Adhesive System (SAS) to dentine. Methods: Ninety bovine teeth were used. For the control group (n = 10), each dentine surface was treated according to the manufacturer's instructions of the SAS. The remaining teeth were randomly distributed into two groups (n = 40), according to the type of dentine surface treatment (ST) - 37% phosphoric acid or Er:YAG Laser prior to the application of the SAS. Each group was further divided into 2 subgroups (n = 20), according to the SH status: dry (D) or wet (W). Each subgroup was further divided into 2 subgroups (n = 10), according to the application method [AM: Active (AC) mode or Passive (PA) mode]. A coat of resin composite (Filtek P90) was applied on the surface. Artificial ageing was performed with a thermo-mechanical cycling machine. The specimens were sectioned into 1 mm × 1 mm × 10 mm sticks and stressed to failure using a universal testing machine. The remaining teeth in each group were used for Scanning Electron Microscopy to examine the fractured area. Data were subjected to a three-way ANOVA, Tukey's test and Dunnet's test (α = 0.05). Results: The ANOVA showed significant differences for SH and AM, but not for ST. For SH, the results of Tukey's test were (in MPa): D-14.9(±3.8)a, W-17.1(±4.3)b; and for AM: PA-14. 9(±4.2)a, AC-17.1(±3.9) b. Conclusions: Acid etching, when combined with a moist dentine surface and the use of primer agitation, improves the bond strength of the SAS to dentine. Clinical Significance: According to the results of the present in vitro study, modification of the application protocols for the silorane-based adhesive system may improve its clinical performance. © 2012 Published by Elsevier Ltd.

Moral judgment competence of medical students: a transcultural study

The authors conducted a cross-sectional short-term study using Lind's Moral Judgment Test (MJT) to compare moral judgment competence (C-score) among students from a medical school in the Northeast region of Brazil and a medical school in the Northern region of Portugal. This study compares the C-scores of groups in the first and eighth semesters of study within each medical school and groups from corresponding semesters between the two medical schools. This study also evaluates the influence of such factors as age and gender on moral competence. A regression of moral judgment competence among the students in their eighth semester versus the students in the first semester of Brazilian medical school (p < 0.001) and a stagnation of moral competence among students in their eighth semester versus the first semester students in the Portuguese medical school (p = 0.06) were observed. For both the first semester and eighth semester groups, the students in the Portuguese medical school had higher C-scores than the students in the Brazilian medical school. In the analysis of the students' performances in terms of MJT dilemmas, the phenomenon of moral segmentation was observed in all of the groups, and the students performed better on the worker's dilemma than on the doctor's dilemma. Among students in the same semester of study, older students had lower C-scores. There was generally no significant difference between men's and women's C-scores. © 2013 Springer Science+Business Media Dordrecht.