Desenvolvimento e validação de método analítico para determinação de benzoato, sorbato, metil e propilparabenos em produtos alimentícios utilizando a eletroforese capilar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fatores qualitativos da ponta de energia hidráulica ADGA 110015 para pulverização agrícola

Este trabalho teve o objetivo de caracterizar o diâmetro e a uniformidade das gotas e o perfil de distribuição volumétrica da ponta denominada antideriva de grande ângulo (ADGA) 110015, nas pressões de 207 e 310 kPa, para determinar o seu espaçamento na barra de pulverização. Os perfis de distribuição volumétrica para a altura de 50 cm foram avaliados em mesa de deposição. A partir dos perfis de distribuição, simulou-se o padrão de deposição ao longo da barra de pulverização. O espectro do diâmetro de gotas foi determinado em analisador de tamanho de partículas por difração laser. Pode-se concluir que a ponta ADGA 110015 apresentou perfil de distribuição do jato simétrico nas pressões de trabalho de 207 e 310 kPa. Na maior pressão, pode-se operar com menor altura da barra ou com as pontas mais espaçadas entre si, pois o maior ângulo de aspersão do jato resultou em diminuição do coeficiente de variação. Entretanto, o aumento da pressão proporcionou redução significativa no diâmetro das gotas, aumentando o potencial de cobertura do alvo, a suscetibilidade à deriva e à evaporação.

Efeitos hemodinâmicos e metabólicos imediatos determinados pelas soluções de cloreto de sódio a 7,5% e de sua associação ao dextran 70 a 6% na reanimação do choque hemorrágico: estudo experimental em cães

JUSTIFICATIVA E OBJETIVOS: O dextran associado à solução hipertônica de cloreto sódio a 7,5% apresenta efeitos hemodinâmicos benéficos no controle prolongado da reanimação no choque hemorrágico. O objetivo deste estudo foi verificar se a associação do dextran à solução de cloreto de sódio a 7,5% apresentaria vantagens na avaliação imediata dos parâmetros hemodinâmicos e metabólicos na reanimação em modelo de choque hemorrágico controlado em cães. MÉTODO: Foram estudados 16 cães submetidos à hemorragia controlada até que a pressão arterial média atingisse 40 mmHg e permanecesse assim por até 30 minutos. Estes foram divididos em G1, com administração de NaCI a 7,5%, e G2, com administração NaCI a 7,5% combinada com dextran 70 a 6%, no volume de 4 mL.kg-1, durante três minutos. Foram avaliados os parâmetros hemodinâmicos e metabólicos. Consideraram-se quatro momentos: M1 - 10 minutos após o preparo cirúrgico, M2 - obtido na metade da fase de choque, M3 - obtido dois minutos após o final da administração das soluções, M4 - 30 minutos após o início da reanimação. RESULTADOS: Após a reanimação, não houve diferença significativa dos valores da FC, PAM, PCP e IRVS. O G2 apresentou valores maiores do IC em M4. Os valores da SvO2 foram menores no G1, final do experimento. A C(a-v)O2 foi maior no G1 nos momentos M3 e M4. Os valores do VO2 aumentaram nos dois grupos em M4 e os valores do lactato plasmático aumentaram progressivamente até M3 e diminuíram em M4. Houve aumento dos valores do Na plasmático e redução do hematócrito nos dois grupos. CONCLUSÕES: O G2 mostrou melhor desempenho hemodinâmico principalmente após 30 minutos do início da reanimação. Observou-se, também, maior expansão plasmática e melhor perfusão tecidual na associação do dextran ao NaCl a 7,5%.

Total secondary-electron yield of metals measured by a dynamic method

The secondary electron emission of dielectrics usually is measured by the pulse method, in which the dielectric is irradiated with short pulses of electrons. Attempts to use a dynamic method, in which the dielectric is irradiated continuously, have failed because the dielectric becomes charged and this charge interferes with the emission process. The dynamic method can, however, be applied to metals where volume charges are prevented. This article reports dynamic measurements of the total secondary emission yield from stainless steel, platinum, and aluminum and compares them with results from the current pulse method. In order to apply the dynamic method to metals a simple but important change in the setup was introduced: a dielectric slab was placed between the electrode and the metallic sample, which permitted the sample surface potential and therefore the energy of the incident electrons to change continuously. Unlike for dielectrics, the emission curves for metals are identical when obtained by the two methods. However, for a sample with deliberately oxidized surfaces the total secondary emission yield is smaller when measured with the dynamic method as compared with the pulse method, just as happens for dielectrics. (C) 2000 American Institute of Physics. [S0021-8979(00)03413-7].

Combinatorial synthesis and directed evolution applied to the production of alpha-helix forming antimicrobial peptides analogues

Antimicrobial peptides (AMPs) are effector molecules of innate immune systems found in different groups of organisms, including microorganisms, plants, insects, amphibians and humans. These peptides exhibit several structural motifs but the most abundant AMPs assume an amphipathic alpha-helical structure. The alpha-helix forming antimicrobial peptides are excellent candidates for protein engineering leading to an optimization of their biological activity and target specificity. Nowadays several approaches are available and this review deals with the use of combinatorial synthesis and directed evolution in order to provide a high-throughput source of antimicrobial peptides analogues with enhanced lytic activity and specificity.

Dermal mast cell counts in F2 Holstein x Gir crossbred cattle artificially infested with the tick Boophilus microplus (Acari : Ixodidae)

The role of dermal mast cells (DMC) in the host resistance to ticks has been studied but it is not totally explained yet. Studies have proposed that zebuine cattle breeds, known as highly resistant to ticks, have more DMC than taurine breeds. In the present study, we compared the number of adult female ticks Boophilus microplus and the mast cells' countings in the skin of F-2 crossbred Gir x Holstein cattle, before and after tick infestation. F-2 crossbred cattle (n = 148) were divided into seven groups and artificially infested with 1.0 x 10(4) B. nticroplus larvae and, 21 days afterwards, adult female-fed ticks attached to the skin were counted. Skin biopsies were taken and examined under light microscopy with a square-lined ocular reticulum in a total area of 0.0625 mm(2) in both the superficial and deep dermis. Results demonstrated that infested F-2 crossbred cattle acquired resistance against the cattle-tick B. microplus probably associated to an increase in the dermal mast cell number. It is concluded that the tick infestation may lead to an environmental modification in the dermis of parasitized hosts due to the massive migration of mast cells or their local proliferation.

MKK3/6-p38 MAPK negatively regulates murine MMP-13 gene expression induced by IL-1 beta and TNF-alpha in immortalized periodontal ligament fibroblasts

Matrix metalloprotease-13 (MMP-13) or collagenase-3 is involved in a number of pathologic processes such as tumor metastasis and angiogenesis, osteoarthritis, rheumatoid arthritis and periodontal diseases. These conditions are associated with extensive degradation of both connective tissue and bone. This report examines gene regulation mechanisms and signal transduction pathways involved in Mmp-13 expression induced by proinflammatory cytokines in periodontal ligament (PDL) fibroblasts. Mmp-13 mRNA expression was increased 10.7 and 9.5 fold after stimulation with IL-1 beta (5 ng/mL) and TNF-alpha (10 ng/mL), respectively. However, inhibition of p38 MAPKinase with SB203580 resulted in significant (p < 0.001) induction (23.2 and 18.1 fold, respectively) of Mmp-13 mRNA as assessed by real time PCR. Negative regulation of IL-1 induced Mmp-13 expression was confirmed by inhibiting p38 MAPK gene expression with siRNA. Transient transfection of dominant negative forms of MKK3 and MKK6 also resulted in increased levels of Mmp-13 mRNA after IL-1 beta stimulation. Mmp-13 mRNA expression induced by TNF-alpha was decreased by JNK and ERK inhibition. Western blot and zymogram analysis indicated that Mmp-13 protein expression induced by the proinflammatory cytokines were also upregulated by inhibition of p38 MAPK. Reporter gene experiments using stable cell lines harboring 660-bp sequence of the murine Mmp-13 proximal promoter indicated that transcriptional mechanisms were at least partially involved in this negative regulation of Mmp-13 expression by p38 MAPK and upstream MKK3/6. These results suggest a negative transcriptional regulatory mechanism mediated by p38 MAPK and upstream MKK3/6 on Mmp-13 expression induced by proinflammatory cytokines in PDL fibroblasts. (c) 2005 Elsevier B.V./International Society of Matrix Biology. All rights reserved.

Kinetic evaluation of the pyrolysis of high density polyethylene over H-AlMCM-41 material

The AlMCM-41 material with Si/Al=50 was synthesized by hydrothermal method, using cethyltrimethylammonium as template. The protonic H-AlMCM-41 acid form was obtained by ion exchange with ammonium chloride solution and subsequent calcination. The characterization of the material by several techniques showed that a good-quality MCM-41 material was obtained. High-density polyethylene (HDPE) has been submitted to thermal degradation alone, and in presence of the exchanged H-AlMCM-41 catalyst at a concentration of 1: 1 in mass (H-AlMCM-41/HDPE). The reactor was connected on line to a gas chromatograph connected to a mass spectrometer. This process was evaluated by thermogravimetry (TG), from 350 to 600degreesC, under helium dynamic atmosphere, with heating rates of 5.0; 10.0 and 20.0 degreesC/min. From TG curves, the activation energy, calculated using a multiple heating rate integral kinetic method, decreased from 225.5 KJ.mol(-1), for the pure polymer (HDPE), to 184.7 KJ.mol(-1), in the presence of the catalyst (H-AlMCM-41/HDPE).

Study of the catalytical intermediates of metalloporphyrins supported on imidazole propyl gel

In this work, the catalytic intermediates for Fe(TPP)(+), Fe(TDCPP)(+), Fe(TFPP)(+), Mn(TPP)(+) and Mn(TDCPP)(+) supported on imidazole propyl gel with PhIO were studied by UV-Vis spectrophotometry. For Fe(TPP)+ and Fe(TFPP)+ the study was also monitored by EPR spectroscopy. The active catalytic intermediate observed for FeP-IPG is the ore-iron (IV) porphyrin pi cation radical Fe-IV(O)P.+, which is evidenced by a decrease in the intensity of the Sorer band. The total re-establishment of the initial Soret band intensity for Fe(TDCPP)IPG and Fe(TFPP)IPG at the end of the reaction shows that they were completely recovered, There are advantages in following the reactions of PNO with unsubstituted Fe(TPP)(+) and Mn(TPP)(+) on IPG by UV-Vis, since they were slower and allowed to 'see' the intermediate species without spectral interference from the recovered catalyst, since they are only partially recovered. With Fe(TPP)IPG, a band at 580 nm was detected at the beginning of the reaction, indicating the possible formation of a Fe-OIPh intermediate. Supporting Mn(TPP)(+) on IPG leads to a shift of band V from 478 nm to 488 nm. In the reaction of MnP-IPG with PhIO, we observed the disappearance of the band in 488 nm and the appearance of a band in 412 nm, which corresponds to the active catalytic intermediate Mn-V(O)P as the main component, as is expected for a more efficient system. The recovery of supported catalysts observed in these experiments was further proved with the possibility of their successive recyclings in cyclohexane oxidation reactions by PhIO.

A REAPPRAISAL OF GENERIC AND SUBGENERIC CLASSIFICATION IN THE BATRACHOSPERMACEAE (RHODOPHYTA)

The generic and subgeneric classification of the family Batrachospermaceae (Rhodophyta) has long been recognized as ambiguous and often inconsistent. One of the prime features used to delineate sections of Batrachospermum, trichogyne shape, is variable even within given species. However, characters associated with the carposporophyte and the carpogonial branch, as well as carpogonial symmetry, are practical and consistent taxonomic criteria. These features have been used to redefine sectional delineation in Batrachospermum. Based on phylogenetic reasoning and practicality, it is proposed that the three genera Nothocladus, Sirodotia and Tuomeya be reduced to sectional level within Batrachospermum. The genus Batrachospermum would thus become the sole member of the Batrachospermaceae and would include two subgenera, Batrachospermum and Acarposporophytum, the former with nine clearly defined sections (Aristata, Batrachospermum, Contorta, Hybrida, Nothocladus (Skuja) stat. nov., Sirodotia (Kylin) stat. nov., Tuomeya (Harvey) stat. nov., Turficola and Viridia). As a result, the following nomenclatural changes are proposed: Batrachospermum lindaueri (Skuja) comb. nov., B. nodosum (Skuja) comb. nov., B. delicatulum (Skuja) comb. nov., B. fennicum (Skuja) comb. nov., B. suecicum (Kylin) comb. nov. and B. americanum (Kutzing) comb. nov.

Low voltage electroluminescence of terbium- and thulium-doped zinc oxide films

Strong interest in developing technology for visual information. stimulates research for thin film electroluminescent devices. Here, for the first time, we report that thulium- and terbium-doped zinc-oxide films are suitable for electroluminescence applications. Two different devices were assembled as lTO/LiF/ZnO:RE/LiF/Al or ITO/SiO2/ZnO:RE/SiO2/Al, where ZnO:RE is a film of zinc oxide containing 10 at% of Tb3+ or Tm3+. Electroluminescence spectra show that besides a broad emission band with maximum around 650 nm assigned to ZnO, also emission lines from Tb3+ at 484 nm (D-5(4) -> F-7(6)), 543 nm (D-5(4) -> F-7(6)), and 589 nm (D-5(4) -> F-7(4)), or from Tm3+ at 478 nm ((1)G(4) -> H-3(6)), and 511 mn (D-1(2) -> H-3(5)) were detected. Intensity of emission as function of applied voltage and current-voltage characteristic are shown and discussed. (c) 2005 Elsevier B.V. All rights reserved.

Synthesis and photoluminescence behavior of Bi4Ti3O12 powders obtained by the complex polymerization method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fiber Post Cementation Strategies: Effect of Mechanical Cycling on Push-out Bond Strength and Cement Polymerization Stress

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)