Water distribution in dentin matrices: Bound vs. unbound water

Objective. This work measured the amount of bound versus unbound water in completely-demineralized dentin.Methods. Dentin beams prepared from extracted human teeth were completely demineralized, rinsed and dried to constant mass. They were rehydrated in 41% relative humidity (RH), while gravimetrically measuring their mass increase until the first plateau was reached at 0.064 (vacuum) or 0.116 g H2O/g dry mass (Drierite). The specimens were then exposed to 60% RH until attaining the second plateau at 0.220 (vacuum) or 0.191 g H2O/g dry mass (Drierite), and subsequently exposed to 99% RH until attaining the third plateau at 0.493 (vacuum) or 0.401 g H2O/g dry mass (Drierite).Results. Exposure of the first layer of bound water to 0% RH for 5 min produced a -0.3% loss of bound water; in the second layer of bound water it caused a -3.3% loss of bound water; in the third layer it caused a -6% loss of bound water. Immersion in 100% ethanol or acetone for 5 min produced a 2.8 and 1.9% loss of bound water from the first layer, respectively; it caused a -4 and -7% loss of bound water in the second layer, respectively; and a -17 and -23% loss of bound water in the third layer. Bound water represented 21-25% of total dentin water. Chemical dehydration of water-saturated dentin with ethanol/acetone for 1 min only removed between 25 and 35% of unbound water, respectively.Signcance. Attempts to remove bound water by evaporation were not very successful. Chemical dehydration with 100% acetone was more successful than 100% ethanol especially the third layer of bound water. Since unbound water represents between 75 and 79% of total matrix water, the more such water can be removed, the more resin can be infiltrated. (C) 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Responses of Dental Pulp Cells to a Less Invasive Bleaching Technique Applied to Adhesively Restored Teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Off-line TMAH-GC/MS and NMR characterization of humic substances extracted from river sediments of northwestern Sao Paulo under different soil uses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bonding ability of paste-paste glass ionomer systems to tooth structure: in vitro studies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Delayed tooth replantation: MTA as root canal filling

MTA has been investigated as a root-end filling material. Its mechanism of action has some similarities to that of Ca(OH())2. The purpose of this study was to evaluate the repair process taking place in the delayed replantation of monkey teeth using calcium hydroxide and MTA as root canal filling materials. Five monkeys had their lateral incisors extracted and bench-dried for 60 minutes. After root canal preparation, the teeth were assigned to two groups according to root canal filling material: I, calcium hydroxide; and II, MTA. The same treatment sequence was followed for both groups: coronal seal, periodontal ligament removal, immersion of the tooth in 2% acidulated-phosphate sodium fluoride, irrigation of the socket with saline and replantation. Both groups exhibited replacement resorption, areas of ankylosis and absence of inflammatory root resorption. Statistically similar results (p > 0.05) were observed for both groups regarding replacement root resorption, but the groups differed significantly (p < 0.05) regarding the occurrence of ankylosis. MTA may be a viable clinical option for filling teeth submitted to delayed replantation, and is an acceptable option for treating replanted permanent teeth in order to prevent tooth resorption, particularly when dressing changes are not possible.

Acute and subacute (28 days) oral toxicity assessment of the oil extracted from Acrocomia aculeata pulp in rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Radiographic characterization of the bone healing process after protein application extracted from hevea brasiliensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Healing process of dogs' pulpless teeth after apicoectomy and root canal filling at different levels

Dogs' teeth with infected root canals, were submitted to apicoectomy and the root canals were filled flush or 2 mm short. In a third group the canals were left unfilled and only the access openings were closed. One hundred and eighty days after the treatment, the animals were killed and the specimens prepared for histological analysis. Repair was not observed in the teeth with unfilled root canals. The healing observed in the teeth with root canals filled flush was less complete than the healing observed when the root canals were filled 2 mm short.

Effects of copper vapor laser irradiation (λ = 510.6 nm) on the enamel and dentine of human teeth: An ultra-structural morphologic study

Objective: A morphological and ultra-structural study of copper vapor laser (λ = 510.6 nm) effects on enamel and dentine was performed to show the effects of this radiation. Methods: A total of 15 human molars were cut in half; 15 pieces were separated for irradiation on enamel and 15 for dentine. These two groups were further divided into five experimental groups, including a control group, comprised of three half-sections each, irradiated by a CVL laser with a power of 7 W, a repetition rate of 15,000 pulses/sec and exposed at 500, 600, and 800 msec and 1 sec irradiation times with a 5-sec interval between irradiations. Results: In an ultra-structural SEM exam, we observed that on the enamel surfaces irradiated for 1 sec there was morphological alteration that consisted of catering, flaking, and melting on the surfaces. There was no alteration for the other exposure times. On the dentine teeth irradiated for 1 sec, we observed an evident ultra-structural alteration of melted tissue and loss of morphological characteristics. In the dentine group irradiated by 800 msec, we observed ablation and a partial loss of morphological characteristics. In the dentine groups irradiated by 500 and 600 msec, no alteration was observed. Conclusions: The results showed that irradiation with CVL promoted morphologic changes in the enamel as well as in the dentine and demonstrated a need for future studies in order to establish a safe protocol for further use in the odontological practice.

Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of intracanal dressings on repair and apical bridging of teeth with incomplete root formation

Periapical repair and apical bridging were studied in dog's teeth with incomplete root formation and induced chronic periapical lesions treated with different dressings. A total of 75 root canals from the upper and lower premolars of 4 dogs approximately 6 months of age were chemo-mechanically prepared and filled with the following dressings: antibacterial dressing consisting of a calcium hydroxide+camphorated p-monochlorophenol paste applied for 7 days and followed by monthly renewed calcium hydroxide paste as temporary dressing at 30, 60 and 90 days (Group A); antibacterial dressing consisting of camphorated p-monochlorophenol alone for 7 days, followed by temporary dressing with calcium hydroxide paste renewed at 30, 60 and 90 days (Group B). A control group (Group C) received no dressings. Ninety days after the last calcium hydroxide paste (Groups A, B) and after the last irrigation/aspiration (Group C), the animals were killed, the maxillae and mandibles were removed, and the material submitted to routine histological processing and examination. Both root canal dressings, were of fundamental importance for apical repair and bridging. The apical bridging was predominantly complete in Group A, incomplete in Group B, and absent in Group C. The calcium hydroxide+camphorated p-monochlorophenol combination gave better results than camphorated p-monochlorophenol alone.

Histopathology of the pulp of primary molars with active and arrested dentinal caries

The purpose of this study was to compare the histological appearance of the pulp of human primary molars with active and arrested lesions. The sample consisted of 36 primary molars (18 with active lesions and 18 with arrested lesions) extracted from 35 children between 5 to 9 years of age. The histological diagnosis was classified in normal pulp, transitional stage, partial pulpitis, total pulpitis and total necrosis, and then subdivided in three subgroups: treatable, untreatable and questionable. Results showed that normal pulp or transitional stage (treatable category) was diagnosed in 50% of teeth with arrested lesions, compared to 11.1% of teeth with active lesions. Partial pulpitis (questionable category) was present in 38.8% with arrested lesions compared to 22.2% with active lesions. Total pulpitis and total necrosis (untreatable category) was diagnosed in 11.2% with arrested lesions compared to 66.7% with active lesions. The observed frequencies of histological categories between both groups were statistically significant (P < 0.05). Histologically, pulp reaction under active and arrested lesions in primary molars revealed the formation of a basophilic calcio-traumatic line at the junction of the primary and reparative dentin, formation of reparative dentin and a regular odontoblastic layer in 60% of the cases. Results indicated that the type of lesion (active or arrested) is a good indicator of the histological status of the pulp.

Effect of time interval between bleaching and bonding on tag formation

The objective of this study was to assess penetration of adhesive material in enamel bleached with 35% hydrogen peroxide using optical polarized light microscopy. Extracted human teeth were randomly assigned to 5 groups, each representing a specific time interval between bleaching and the application of an adhesive material. They were designated as: (TC) the control group-restorations in unbleached teeth; (T0) comprising restorations carried out immediately after bleaching; (T7) comprising restorations 7 days after bleaching; (T14) comprising restorations 14 days after bleaching; and (T21) comprising restorations 21 days after bleaching. Length of resin tags was measured with an Axiophot photomicroscope at a x 400 magnification, and the results subjected to an ANOVA for a comparison between groups, with a p value of < 0.05. Differences between the groups were verified using a Tukey test at a confidence level of 5%. The specimens in the control group (TC) and experimental groups T7, T14 and T21 showed better penetration of adhesive material into enamel in comparison with experimental group T0. This suggests that a gap of at least 7 days should be left between bleaching enamel with 35% hydrogen peroxide and placing adhesive bonding agents and undertaking resin composite restoration work.