Prospective study for the development of emulsion systems containing natural oil products

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On relaxed LMI-based design for fuzzy controllers

Relaxed conditions for stability of nonlinear continuous-time systems given by fuzzy models axe presented. A theoretical analysis shows that the proposed method provides better or at least the same results of the methods presented in the literature. Digital simulations exemplify this fact. This result is also used for fuzzy regulators design. The nonlinear systems are represented by fuzzy models proposed by Takagi and Sugeno. The stability analysis and the design of controllers axe described by LMIs (Linear Matrix Inequalities), that can be solved efficiently using convex programming techniques.

On relaxed LMI-based designs for fuzzy regulators and fuzzy observers

Relaxed conditions for stability of nonlinear, continuous and discrete-time systems given by fuzzy models are presented. A theoretical analysis shows that the proposed methods provide better or at least the same results of the methods presented in the literature. Numerical results exemplify this fact. These results are also used for fuzzy regulators and observers designs. The nonlinear systems are represented by fuzzy models proposed by Takagi and Sugeno. The stability analysis and the design of controllers are described by linear matrix inequalities, that can be solved efficiently using convex programming techniques. The specification of the decay rate, constrains on control input and output are also discussed.

Prediction of Hevea progeny performance in the presence of genotype-environment interaction

Twenty two open-pollinated Hevea progenies from different parental clones of the Asian origin were tested at five sites in the Northwestern São Paulo State Brazil to investigate the progeny girth growth, rubber yield, bark thickness and plant height. Except for the rubber yield, the analysis of variance indicated highly significant (p<0.01) genotype x environment interaction and heterogeneity of regressions among the progenies. However, the regression stability analysis identified only a few interacting progenies which had regression coefficients significantly different from the expected value of one. The linear regressions of the progeny mean performance at each test on an environmental index (mean of all the progenies in each test) showed the general stability and adaptability of most selected Hevea progenies over the test environments. The few progenies which were responsive and high yielding on different test sites could be used to maximize the rubber cultivars productivity and to obtain the best use of the genetically improved stock under different environmental conditions.

Formation of bright solitons and soliton trains in a fermion-fermion mixture by modulational instability

We employ a time- dependent mean- field- hydrodynamic model to study the generation of bright solitons in a degenerate fermion - fermion mixture in a cigar- shaped geometry using variational and numerical methods. Due to a strong Pauli- blocking repulsion among identical spin- polarized fermions at short distances there cannot be bright solitons for repulsive interspecies interactions. Employing a linear stability analysis we demonstrate the formation of stable solitons due to modulational instability of a constant-amplitude solution of the model equations for a sufficiently attractive interspecies interaction. We perform a numerical stability analysis of these solitons and also demonstrate the formation of soliton trains by jumping the effective interspecies interaction from repulsive to attractive. These fermionic solitons can be formed and studied in laboratory with present technology.

Bright solitons and soliton trains in a fermion-fermion mixture

We use a time-dependent dynamical mean-field-hydrodynamic model to predict and study bright solitons in a degenerate fermion-fermion mixture in a quasi-one-dimensional cigar-shaped geometry using variational and numerical methods. Due to a strong Pauli-blocking repulsion among identical spin-polarized fermions at short distances there cannot be bright solitons for repulsive interspecies fermion-fermion interactions. However, stable bright solitons can be formed for a sufficiently attractive interspecies interaction. We perform a numerical stability analysis of these solitons and also demonstrate the formation of soliton trains. These fermionic solitons can be formed and studied in laboratory with present technology.

Localization of collisionally inhomogeneous condensates in a bichromatic optical lattice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação de métodos de adaptabilidade e estabilidade relacionados à produtividade de grãos de cultivares de milho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estabilidade oxidativa de óleos vegetais utilizados em frituras de mandioca palito congelada

O presente estudo teve como objetivo determinar a medida da estabilidade oxidativa e a alteração total dos óleos de algodão, girassol e palma durante a fritura descontínua de mandioca palito congelada. As frituras foram conduzidas em uma fritadeira elétrica doméstica, onde o óleo foi aquecido, à temperatura de 180°C, por 25 h, com reposição de óleo fresco. Para a análise da estabilidade oxidativa das amostras de óleos, obtidas durante as frituras, foram realizadas a medida do período de indução (horas) e determinação de compostos polares totais (%). Os resultados mostraram uma diminuição do período de indução, independente do tipo de óleo. O óleo de palma refinado apresentou um maior período de indução quando comparado ao óleo de algodão e girassol, o que pode ser atribuído à diferença da composição em ácidos graxos. Todos os óleos em estudo apresentaram valores de compostos polares totais abaixo do limite de descarte para óleos de fritura, exigido pela legislação internacional (24-27%). Verificou-se também que, à medida que se formaram os compostos de degradação, diminuiu a estabilidade oxidativa dos óleos.

Estabilidade de agregados de um latossolo vermelho tratado com cama de peru

Recentemente, tem ocorrido um grande aumento na produção de aves, com destaque para a carne de peru, motivado pelo aumento das exportações e a conquista de novos mercados. Como conseqüência, tem sido gerada uma grande quantidade de resíduos orgânicos com potencial impacto sobre o ambiente. A cama de peru constitui-se no principal resíduo dessa atividade avícola, e uma das formas de sua utilização é a sua disposição em solos como condicionador de suas características físicas e químicas. Assim, objetivou-se com este trabalho avaliar o efeito da aplicação da cama de peru na estabilidade de agregados de um Latossolo Vermelho Distrófico típico, sob pastagem de Brachiaria decumbens, localizado em Uberlândia, no Triângulo Mineiro, Minas Gerais. A cama de peru foi aplicada nas dosagens de: 0 (controle), 1.200, 2.400 e 4.800 kg ha-1 e 2.400 kg ha-1 + adubação mineral (36 kg ha-1 N, 60 kg ha-1 K2O e 60 kg ha-1de P2O5). As aplicações foram realizadas em janeiro de 2004 e o solo amostrado em duas épocas distintas (60 e 210 dias após aplicação) nas camadas de 0-20 e 20-40 cm para análise da estabilidade de agregados, avaliada pela percentagem total de agregados, percentagem de agregados maiores que 2mm, menores que 0,25mm e diâmetro médio geométrico (DMG). Não houve efeito das dosagens de cama de peru aplicadas na agregação do solo, entretanto, independentemente da dose aplicada houve um aumento na estabilidade de agregados, ao longo do tempo, notadamente na camada de 0-20 cm.

Study of alternative schemes for the parameterization step of the continuation power flow method based on physical parameters, part I: Mathematical modeling

The conventional power flow method is considered to be inadequate to obtain the maximum loading point because of the singularity of Jacobian matrix. Continuation methods are efficient tools for solving this kind of problem since different parameterization schemes can be used to avoid such ill-conditioning problems. This paper presents the details of new schemes for the parameterization step of the continuation power flow method. The new parameterization options are based on physical parameters, namely, the total power losses (real and reactive), the power at the slack bus (real or reactive), the reactive power at generation buses, and transmission line power losses (real and reactive). The simulation results obtained with the new approach for the IEEE test systems (14, 30, 57, and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are not only preserved but also improved.

Study of alternative schemes for the parameterization step of the continuation power flow method based on physical parameters, part II: Performance evaluation

New parameterization schemes have been proposed by the authors in Part I of this paper. In this part these new options for the parameterization of power flow equations are tested, namely, the total power losses (real and reactive), the power at the slack bus (real or reactive), the reactive power at generation buses, and the transmission line power losses (real and reactive). These different parameterization schemes can be used to obtain the maximum loading point without ill-conditioning problems, once the singularity of Jacobian matrix is avoided. The results obtained with the new approach for the IEEE test systems (14, 30, 57, and 118 buses) show that the characteristics of the conventional method are not only preserved but also improved. In addition, it is shown that the proposed method and the conventional one can be switched during the tracing of PV curves to determine, with few iterations, all points of the PV curve. Several tests were also carried out to compare the performance of the proposed parameterization schemes for the continuation power flow method with the use of both the secant and tangent predictors.

Comments, with reply on 'Continuous time relay-controlled model reference adaptive-system' by A. Abdulkareem and R. Nagarajam

An adaptive scheme is shown by the authors of the above paper (ibid. vol. 71, no. 2, pp. 275-276, Feb. 1983) for continuous time model reference adaptive systems (MRAS), where relays replace the usual multipliers in the existing MRAS. The commenter shows an error in the analysis of the hyperstability of the scheme, such that the validity of this configuration becomes an open question.

Variational studies and replica symmetry breaking in the generalization problem of the binary perceptron

We analyze the average performance of a general class of learning algorithms for the nondeterministic polynomial time complete problem of rule extraction by a binary perceptron. The examples are generated by a rule implemented by a teacher network of similar architecture. A variational approach is used in trying to identify the potential energy that leads to the largest generalization in the thermodynamic limit. We restrict our search to algorithms that always satisfy the binary constraints. A replica symmetric ansatz leads to a learning algorithm which presents a phase transition in violation of an information theoretical bound. Stability analysis shows that this is due to a failure of the replica symmetric ansatz and the first step of replica symmetry breaking (RSB) is studied. The variational method does not determine a unique potential but it allows construction of a class with a unique minimum within each first order valley. Members of this class improve on the performance of Gibbs algorithm but fail to reach the Bayesian limit in the low generalization phase. They even fail to reach the performance of the best binary, an optimal clipping of the barycenter of version space. We find a trade-off between a good low performance and early onset of perfect generalization. Although the RSB may be locally stable we discuss the possibility that it fails to be the correct saddle point globally. ©2000 The American Physical Society.

Novos resultados sobre a estabilidade e controle de sistemas nao-lineares utilizando modelos fuzzy e LMI

Relaxed conditions for the stability study of nonlinear, continuous and discrete-time systems given by fuzzy models are presented. A theoretical analysis shows that the proposed method provides better or at least the same results of the methods presented in the literature. Digital simulations exemplify this fact. These results are also used for the fuzzy regulators design. The nonlinear systems are represented by the fuzzy models proposed by Takagi and Sugeno. The stability analysis and the design of controllers are described by LMIs (Linear Matrix Inequalities), that can be solved efficiently by convex programming techniques. The specification of the decay rate, constraints on control input and output are also described by LMIs. Finally, the proposed design method is applied in the control of an inverted pendulum.