99 resultados para Saline adaptation
Resumo:
Realizou-se adaptação cultural do Inventário de Oldenburg para estudantes (OLBI-S) em português e estimou-se sua confiabilidade e validade. O OLBI-S foi preenchido por 958 estudantes universitários brasileiros e 602 portugueses. O modelo fatorial original apresentou ajustamento adequado mas foram removidos dois itens com confiabilidade individual baixa (λ<0,5). A nova estrutura apresentou bom ajustamento a 2/3 da amostra total sendo invariante no 1/3 restante da amostra. Verificou-se baixa consistência interna e validade convergente, confiabilidade compósita aceitável, boa validade discriminante, concorrente e divergente. O OLBI-S não foi invariante nas amostras de Brasil e Portugal. O OLBI-S apresentou limitações e ausência de validade transcultural nas amostras estudadas.
Resumo:
Realizou-se adaptação cultural do Inventário de Burnout de Copenhagen para estudantes (CBI-S) em português e estimou-se sua confiabilidade e validade. O CBI-S foi preenchido por 958 estudantes universitários brasileiros e 556 portugueses. O modelo fatorial original apresentou bom ajustamento entretanto, foram removidos dois itens com confiabilidade individual baixa (λ<0,5). A nova estrutura apresentou bom ajustamento a 2/3 da amostra total sendo invariante no 1/3 restante da amostra original. Verficou-se adequada consistência interna e validade convergente, discriminante e concorrente. Os pesos fatoriais do CBI-S não foram invariantes nas amostras de Brasil e Portugal. O CBI-S apresentou adequada confiabilidade e validade entretanto, verificou-se ausência de estabilidade transcultural.
Resumo:
Uma das utilizações da técnica de cultura de tecidos para o melhoramento vegetal é a identificação de linhas de células que apresentem tolerância ao estresse salino. Para se estudar os mecanismos bioquímicos envolvidos na expressão genética da tolerância a salinidade, calos oriundos de eixos embrionários de quatro cultivares de feijão (Phaseolus vulgaris L.; cultivares IAC - carioca, IAPAR 14, JALO-EEP 558, BAT - 93), foram cultivados em meio sólido Murashige & Skoog (1962), suplementado com NaCl nas concentrações de 0, 20, 40, 60 e 80 mM. Após 14 dias de incubação, os calos foram coletados e analisados quanto aos padrões isoenzimáticos e de atividade das peroxidases. Os cultivares BAT e IAPAR apresentaram duas zonas de atividade em comum na região anódica e apenas uma zona enzimática específica a cada um deles (migração mais rápida).Possivelmente as duas zonas anódicas intermediárias sejam produtos do mesmo loco enzimático, porém com alelos diferentes, consequentemente diferentes mobilidades eletroforéticas. O cv. JALO apresentou duas zonas anódicas de atividade em comum com os cultivares IAC e IAPAR com uma zona anódica exclusiva de migração mais lenta, a qual apresentou atividade mais intensa de todos os cultivares analisados. Este cultivar revelou ainda uma zona catódica provavelmente dimérica e heterozigota nos indivíduos de todos os tratamentos aplicados. Provavelmente, esta é a mesma zona que ocorre em homozigose com fixação do alelo lento para os indivíduos de todos os tratamentos efetuados nos cultivares BAT e IAPAR. O cv. IAC apresentou duas bandas anódicas em comum com os cv. IAPAR e JALO. Apresentou também a banda anódica mais rápida em comum com o cv. IAPAR e uma banda anódica exclusiva de migração mais lenta. Curiosamente, os indivíduos deste cv. mantidos em meio suplementado com 20 mM de NaCl não apresentaram atividade nas três zonas anódicas mais lentas. Ocorreu no cv. IAC uma única zona de atividade catódica, dimérica e heterozigota para os indivíduos provenientes de todos os tratamentos, composta provavelmente de dois alelos diferentes da zona correspondente ao cv. JALO. Amostras provenientes dos tratamentos 40 e 60 mM de NaCl, desta zona catódica, apresentaram maior atividade enzimática. A análise da atividade da peroxidase no extrato bruto, revelou que os cultivares responderam diferentemente ao aumento da concentração salina no meio de cultura, com aumento pronunciado dessa atividade nos cultivares IAC e JALO.
Resumo:
Water and 3% NaCl intake were increased by the injection of 4 ng angiotensin II (ANG II) into the anteroventral third ventricle (AV3V) region of rats. Pretreatment with two specific ANG II receptor antagonists, [octanoyl-Leu8]ANG II and [Leu8]ANG II, significantly reduced ANG II-induced water and saline intake. This inhibition lasted approximately 30 min, with partial recovery at 60 min. In rats with electrolytic lesion of the bilateral ventromedial nucleus of hypothalamus (VMH), the effect of ANG II on water intake was not different from that observed in sham rats, but saline ingestion increased. In summary, the present results show that the AV3V region is an important central structure for ANG II-induced saline ingestion. Lesion of the VMH increases the response to ANG II, showing an interaction between the AV3V region and the VMH in the regulation of salt ingestion.
Resumo:
The effect of intravenous infusion of hypertonic saline (HS, 7.5% NaCl) on the recovery of mean arteria pressure (MAP) after hemorrhage was studied in sham-operated rats and in rats with electrolytic lesion of the anteroventral third ventricle (AV3V) region (4 h, 4 and 20 days). Rats anesthetized with thiopental sodium were bled (about 2.8 ml/100 g) until the MAP was stabilized at the level of 60 mmHg for 30 min. In sham-lesioned rats, MAP increased to 90 mmHg and became stable near this level after intravenous infusion of 7.5% NaCl (4 ml/kg b.wt.). In AV3V-lesioned rats, the same infusion induced a smaller increase in MAP (80 mmHg) and the MAP returned to pre-infusion levels within 30 min. These results show that the AV3V region plays an important role in the recovery of arterial pressure induced by hypertonic saline in rats submitted to hemorrhagic shock.
Resumo:
Flotation has been widely used in studies of recent foraminifera in order to concentrate tests and save time during picking. In this paper, four flotation agents with different densities were compared: (1) trichloroethylene, TCE (C2HCl3), with a density of 1.46 g mL(-1); (2) sodium nitrate/sodium thiosulfate solution, SNT (NaNO3 + Na2O3S2 center dot 5H(2)O), with a density of 1.46 g mL(-1); (3) zinc chloride Solution, ZC (ZHCl(2)), with a density of 1.70 g mL(-1); and (4) sodium polytungstate solution, SPT (3Na(2)WO(4) center dot 9WO(3) center dot 5H(2)O), with a density of 2.50 g mL(-1). Comparison was carried out by means of qualitative and quantitative data. Results showed that ZC and SPT were the best flotation agents, recovering 91% and 96% of the total tests, respectively, whereas TCE and SNT recovered 59.1% and 72.8%, respectively. Both quantitative and qualitative results significantly improved with a higher density of the flotation liquid. Therefore, substitution of TCE with ZC or SPT solutions is strongly encouraged, because they are, additionally, less harmful to health and the environment. ZC is the most cost-effective, since its results were not significantly different from those of the SPT treatment. Carbon tetrachloride (CCl4) was not considered in this comparative study, because it has been banned in many countries and it is highly harmful to health and the environment.
Resumo:
Well-fitted dentures prevent hyperplasic lesions, provide chewing efficiency and promote patient's comfort. Several factors may affect final adaptation of dentures, as the type of the acrylic resin, the flask cooling procedure and the water uptake. This investigation evaluated the effect of water storage and two different cooling procedures [bench cooling (BC) for 2 h; running water (RW) at 20 degreesC for 45 min] on the final adaptation of denture bases. A heat-cured acrylic resin (CL, Classico, Classico Artigos Odontologicos) and two microwave-cured acrylic resins [Acron MC, (AC) GC Dent. Ind. Corp.; Onda Cryl (OC), Classico Artigos Odontologicos] were used to make the bases. Adaptation was assessed by measuring the weight of an intervening layer of silicone impression material between the base and the master die. Data was submitted to ANOVA and Tukey's test (0.05). The following means were found: (BC) CL=0.72 +/- 0.03 a; AC=0.70 +/- 0.03 b; OC=0.76 +/- 0.04 c//(RW) CL= 1.00 +/- 0.11 a; AC=1.00 +/- 0.12 a; OC=0.95 +/- 0.10 a. Different labels join groups that are not statistically different (P > 0.05). Comparisons are made among groups submitted to the same cooling procedure (BC or RW). The conclusions are: interaction of type of material and cooling procedure had a statistically significant effect on the final adaptation of the denture bases (P < 0.05); water storage was not detected as a source of variance (P > 0.05) on the final adaptation.