Scale-invariant resonance tagging in multijet events and new physics in Higgs pair production

We study resonant pair production of heavy particles in fully hadronic final states by means of jet substructure techniques. We propose a new resonance tagging strategy that smoothly interpolates between the highly boosted and fully resolved regimes, leading to uniform signal efficiencies and background rejection rates across a broad range of masses. Our method makes it possible to efficiently replace independent experimental searches, based on different final state topologies, with a single common analysis. As a case study, we apply our technique to pair production of Higgs bosons decaying into b\overline{b} pairs in generic New Physics scenarios. We adopt as benchmark models radion and massive KK graviton production in warped extra dimensions. We find that despite the overwhelming QCD background, the 4b final state has enough sensitivity to provide a complementary handle in searches for enhanced Higgs pair production at the LHC. © 2013 SISSA.

Psychometric Properties of the Oral Health Impact Profile and New Methodological Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of light source and immersion media in surface roughness and hardness of a nanofilled composite resin

The study evaluated the influence of light curing units and immersion media on superficial roughness and microhardness of the nanofilled composite resin Supreme XT (3M/ESPE). Light curing units used were: XL 3000 (3M/ESPE), Jet Lite 4000 Plus (JMorita) and Ultralume Led 5 (Ultradent) and immersion media were artificial saliva, Coke®, tea and coffee, totaling 12 experimental groups. Specimens (10mm x 2mm) were immersed in each respective solution for 5 seconds, three times a day, during 60 days and so, were submitted to measure of superficial roughness (Ra) and Vickers hardness. Data were subjected to two-way ANOVA test (p<0.05). Results showed that only the light source factor showed statistically difference for hardness. It was observed that the hardness of the composite resin Filtek Supreme XT (3M/ESPE) was influenced by the light source (p<0.01) independently of the immersion media (p= 0.35) and the Jet Lite 4000 Plus (JMorita) was the light curing unit that presented lower values. In relation to surface roughness, it was noted no-significant statistical difference for light source (p=0.84), when specimens were immersed in different beverages (p=0.35).

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media

Aims: The study evaluated the influence of light curing units and immersionmedia on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M)through the EDX analysis and SEM evaluation. Light curing units with different power densitiesand mode of application used were XL 3000 (480 mW/cm2), Jet Lite 4000 Plus (1230mW/cm2), andUltralume Led 5 (790 mW/cm2) and immersion media were artificial saliva, Coke1, tea and coffee,totaling 12 experimental groups. Specimens (10 mm 3 2 mm) were immersed in each respectivesolution for 5 min, three times a day, during 60 days and stored in artificial saliva at 378C 6 18Cbetween immersion periods. Topography and chemical analysis was qualitative. Findings: Groupsimmersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calciumat the material surface. Regarding coffee, there was a reasonable chemical degradation with loss ofload particles and deposition of ions. For tea, superficial degradation occurred in specific areaswith deposition of calcium, carbon, potassium and phosphorus. For Coke1, excessive matrix degra-dation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion:Light curing units did not influence the superficial morphology of composite resin tested, but theimmersion beverages did. Coke1affected material’s surface more than did the other tested drinks.Microsc. Res. Tech. 73:176–181, 2010.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Anti-dementia medications: current prescriptions in clinical practice and new agents in progress

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Challenges to the treatment and new perspectives for the eradication of helicobacter pylori

Helicobacter pylori (H. pylori) is one of the leading causes of gastric diseases such as chronic gastritis, peptic ulcer, and gastric adenocarcinoma. The current treatment of H. pylori infection with antibiotics and proton pump inhibitors has several limitations, including poor adherence and intrinsic patient-related factors, drug resistance, and the absence of adequate treatments. This review summarizes the current therapeutic approaches to eradicating H. pylori, the difficulties associated with its treatment, and several new perspectives aimed at improving existing treatment strategies.

Current advances in antitubercular drug discovery: potent prototypes and new targets

Tuberculosis (TB) is an infectious disease caused by bacterium of the Mycobacterium genus, mainly by Mycobacterium tuberculosis (MTB). The World Health Organization aims to substantially reduce the number of cases in the coming years; however, the increased number of multidrug-resistant (MDR) and extremely drug-resistant (XDR) forms of the bacterium and the lack of treatment for latent tuberculosis are challenges to be overcome. In this review, we have identified the most potent compounds described in the literature during recent years with MIC values < 7 µM, low toxicity and a high selective index. In addition, emerging targets in MTB are presented to provide new perspectives for the discovery of new antitubercular drugs. This review aims to summarize the current advances in and promote insights into antitubercular drug discovery.

Does a mandibular RDP and new maxillary CD improve masticatory efficiency and quality of life in patients with a mandibular Kennedy class I arch?

To evaluate the change in masticatory efficiency and quality of life of patients treated with mandibular Kennedy class I removable partial dentures (RPDs) and maxillary complete dentures at the Department of Dentistry of the Federal University of Rio Grande do Norte. A total of 33 Kennedy class I patients were rehabilitated with maxillary complete dentures, and mandibular RPDs were selected for this non-randomized prospective intervention study. The patients had a mean age of 59.1 years. Masticatory efficiency was evaluated by colorimetric assay using fuchsin capsules. The measurements were conducted at baseline and 2 and 6 months after prosthesis insertion. Quality of life was evaluated using the Oral Health Impact Profile (OHIP-14) at baseline and 6 months after denture insertion. The Kolmogorov-Smirnov normality test was applied. Masticatory efficiency was evaluated by repeated measures ANOVA. Oral health-related quality of life was compared using the paired t test. There was no statistically significant difference in masticatory efficiency after denture insertion (p = 0.101). Significant differences were found (p = 0.010) for oral health-related quality of life. A significant improvement in psychological discomfort (p < 0.01) and psychological disability (p < 0.01) was observed. Mean difference value (95 % confidence interval) was 6.8 (3.8 to 9.7) points, reflecting a low impact of oral health on quality of life, considering the 0-56 range of variation of the OHIP-14 and a Cohen's d of 1.13. According to the results of the present study, rehabilitation with Kennedy class I RPDs and complete dentures did not influence masticatory efficiency but improved oral health-related quality of life. The association between the patient's quality of life and the masticatory efficiency is important for treatment predictability.

Galleria mellonella as a model host for human pathogens: recent studies and new perspectives

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Integration of R&D and new product development: case studies of Brazilian high-tech firms

One of the aspects that influence good performance of new product development (NPD) at high-tech companies is the integration of research and development (R&D) and the other functions involved with NPD. The objective of this paper is to examine why Brazilian medium and large sized high-tech companies are different with respect to the integration of R&D with NPD. An analysis of case studies was conducted at five Brazilian high-tech firms. Among the results, collectivism, which is characteristic of the Brazilian organisational culture, was seen to manifest itself in companies through the adoption of cross-functional teams; the valorisation of personal relations, which is stimulated by physical proximity; and project managers’ ample participation in different functions involving NPD.

Comparison of Brucella agar, CITA and Farrel media for selective isolation of Brucella abortus from semen of bovine bulls

Brucellosis remains as a public health concern worldwide. In domestic animals, the disease is characterized by reproductive disorders in male and female. Besides extensive use of serological tests and recent development of molecular biology techniques, microbiological culture of Brucella species is yet considered a “gold standard” method for diagnosis. Here, semen of 335 bovine bulls was subjected simultaneously to microbiological culture in Brucella agar, Farrell media, and CITA media to evaluate comparatively the best selective media for isolation of Brucella sp. Among all 335 samples, B. abortus B19 strain was isolated from semen of five (1.49%) bulls using the three selective media. However, Farrell media was considered the best selective media for microbiological diagnosis, because of allowed isolation of B. abortus B19 strain from bull semen without bacterial commensal or fungal contamination of plates.