278 resultados para Explorações de ouro
Resumo:
The purpose of this study was to evaluate the accuracy of the depth of carious lesions on bitewing radiographs. Methods Recently extracted primary molars had their proximal surfaces evaluated visually (EC) and classified as healthy surface (0), signs that suggest the presence of carious lesions in enamel (1), signs of a superficial lesion in dentin (2) and carious lesions in deep dentin (3). Results The results were obtained by consensus between the investigators. The gold standard was determined by histological analysis. The values of sensitivity, specificity, accuracy and area under the ROC (Receiver Operating Characteristic) curve were evaluated. There was equilibrium between sensitivity (76.92% EC and 88.46% ER) and specificity (95.83% EC and 95.83% ER). Accuracy was 86.01% (EC) and 88.46% (ER). The Spearman correlation test was used to prove the correlation between clinical and radiographic examinations (0.886), for clinical and histological (0.736) and for radiographic and histological analysis (0.843).
Resumo:
The early tooth loss and periodontal disease often leave inadequate bone volume for installation of osseointegrated implants. The autogenous bone graft is considered the gold standard for reconstruction of residual bone defects. Some surgical techniques can be performed, including extra or intraoral donor sites depending on the degree of bone loss, depending on surgical-prosthetic planning and general condition of the patient. The intraoral bone grafts offer a safe option to rebuilt bone volume in smaller rehabilitations, with low morbidity and minimal postoperative discomfort. Among the possible donor sites, the mandibular ramus and body, which offer predominantly cortical bone, and the chin area, which offers corticomedullary bone tissue, can be harvested. The graft will be suitable both in quantity and quality, preserving the capacity of osteogenesis, osteoinduction and osteoconduction, which differentiate autogenous grafts from other biomaterials. The aim of this study was to report a clinical case in which the mandibular ramus graft was used for total reconstruction of an edentulous maxilla, showing that even large areas can be reconstructed with grafts from intraoral origin. All the steps that allowed the complete reconstruction of the maxilla done by an intraoral donor area are listed in the text, culminating in an extremely satisfactory clinical result.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This study aimed to compare three different methodologies (Adult Immersion Tests, field trials with naturally infected animals, and a Stall Test using artificially infested cattle) to evaluate the efficacy of two topical formulations that we administered as whole body sprays (15% Cypermethrin + 30% Chlorpyriphos + 15% Fenthion-Colosso (R) FC 30, Ouro Fino Agronegocios; and 60% Dichlorvos + 20% Chlorpyriphos-Ectofos (R), Vallee Saude Animal Ltd.), against a susceptible strain of Rhipicephalus (Boophilus) microplus. To achieve this objective, two natural infestation trials were conducted, as well as two artificial infestation trials (Stall Tests) and two Adult Immersion Tests (AIT). The AIT results showed that both spray formulations achieved 100% efficacy against R. (B.) micro plus fully engorged females. However, when observing results obtained by field trials (natural infestations) and Stall Tests, none of these topically applied compounds reached 100% efficacy or affected the reproductive capacity of the fully engorged female ticks. Additional studies must be conducted to compare these in vivo methodologies with different in vitro techniques, such as the Larval Packet Test. However, based on results obtained here, we can conclude that depending on the spray formulations used, the AIT can overestimate acaricidal efficacy and values of reproductive efficiency of such compounds against R (B.) micro plus. Specifically, when dealing with spray formulations in the Stall Tests, the period of residual action can increase because these animals are sheltered from contact with environmental factors that might interfere with the efficacy of the products tested. It may be necessary to take in vivo trial results into consideration (such as field trials with naturally infested animals or Stall Tests) to standardize a specific in vitro assay, such as the Adult Immersion Test. (C) 2014 Elsevier B.V. All rights reserved.
Resumo:
This research aimed to develop a Fuzzy inference based on expert system to help preventing lameness in dairy cattle. Hoof length, nutritional parameters and floor material properties (roughness) were used to build the Fuzzy inference system. The expert system architecture was defined using Unified Modelling Language (UML). Data were collected in a commercial dairy herd using two different subgroups (H-1 and H-2), in order to validate the Fuzzy inference functions. The numbers of True Positive (TP), False Positive (FP), True Negative (TN), and False Negative (FN) responses were used to build the classifier system up, after an established gold standard comparison. A Lesion Incidence Possibility (LIP) developed function indicates the chances of a cow becoming lame. The obtained lameness percentage in H-1 and H-2 was 8.40% and 1.77%, respectively. The system estimated a Lesion Incidence Possibility (LIP) of 5.00% and 2.00% in H-1 and H-2, respectively. The system simulation presented 3.40% difference from real cattle lameness data for H-1, while for H-2, it was 0.23%; indicating the system efficiency in decision-making.
Resumo:
The present study aimed to evaluate ivermectin and abamectin, both administered orally in naturally infected domestic swine, as well as analysing if the EPG (eggs per gram of faeces) values were equivalent with the ivermectin and abamectin efficacy obtained by 'parasitological necropsies. The animals were randomly selected based on the average of three consecutive EPG counts of Strongylida, Ascaris suum and Trichuris for experiment I, and of Strongylida and Trichuris for experiment II. After the random draw, eight animals were treated, orally, during seven consecutive days with 100 mu g/kg/day ivermectin (Ivermectina (R) premix, Ouro Fino Agronegocios), eight other animals were treated, orally, during seven consecutive days with 100 mu g/kg/clay abamectin (Virbamax (R) premix - Virbac do Brasil Industria e Comercio Ltda.), and eight pigs were kept as controls. EPG counts were performed for each individual animal at 14th day post-treatment (DPT). All animals (control and treatment) were necropsied at the 14th DPT. The results from both experiments demonstrate that both ivermectin and abamectin, administered orally for a continuous period of seven days, at a daily dosage of 100 mu g/kg, were highly effective (>95%) against Hyostrongylus rubidus, Strongyloides ransomi, Ascaris suum and Metastrongylus salmi. Against Oesophagostomum dentatum, abamectin presented over 95% efficacy against both evaluated strains, while ivermectin reached other strain as resistant. Regarding T. suis, both ivermectin and abamectin were effective (efficacies >90%) against one of the tested strains, while the other one was classified as resistant. Furthermore, the EPG values were equivalent with the ivermectin and abamectin efficacy obtained by parasitological necropsies. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure: 2h); G3- four 2-hour exposures to 35% carbamide peroxide (total exposure: 8h); G4- two applications of 35% hydrogen peroxide, which was light-activated with halogen lamp at 700mW/cm2 during 7min and remained in contact with enamel for 20min (total exposure: 40min). All bleaching treatments adopted in this study followed the application protocols advised by manufacturers. Evaluation of groups submitted to 35% carbamide peroxide was carried out after two time intervals (30 minutes and 2 hours per session), following the extreme situations recommended by the manufacturer. Specimens were prepared for SEM analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel damage could be noticed. Clinical significance: In-office bleaching materials may adversely affect enamel morphology and therefore should be used with caution.
Resumo:
Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...
Resumo:
Pós-graduação em Música - IA
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)