O processo de elaboração do plano de preservação do conjunto urbanístico de Brasília: uma representação conceitual da política de preservação urbana no DF

This research aims to provide a reflection on the preservation practices of Brasilia as Cultural Heritage in four analytical/political dimensions: conceptual, urban, political-institutional and legal. In order to do that, the preparation process for the Plan for the Preservation of Brasilia Urban Set (PPCUB) was taken as research object. This preservation plan is representative of the context which determines the relation between goals and preservation practices in the social production process of urban space. Designed by Lucio Costa in 1957, Brasilia received the Cultural Heritage title 27 years later, in 1987. It was recognized a World Heritage Site by the United Nations Educational, Scientific and Cultural (UNESCO) in the same year as it "represents a unique artistic piece of work, a masterpiece of creative genius"; and "an outstanding example of a type of construction or architectural compound that illustrates a significant stage in history" (SILVA, 2003). Brasilia’s urban conception, also recognised in the district and federal levels, gives prominence to the 'urban scales' – monumental, residential, gregarious and bucolic – as the main aspects to be preserved. Despite being an undoubted representative, Brasilia seemingly displays a contradiction. On the one hand, the essential value of the city’s urban design is acknowledged as cultural heritage at international, national and district levels. On the other hand, numerous ways of urban interventions disregard the principles of that conception. In 2012, the international Monitoring Report raised some issues which highlight the following main needs: primary need for clear definition of the urban scales’ characteristics and boundaries; definition of a legal framework that conciliates national and district laws of occupation and use of land; creation of inter-sectors executive authority with both decision-making and financial autonomy; and promotion of heritage educational programs. This report also proposes "to cancel the current process of approval conducted by PPCUB and establish a formal consultation process through a committee made up by GDF and IPHAN, which will enable the active participation of University of Brasilia, the Architects Association, ICOMOS and local organizations" (SEDHAB, 2010). Already in its drafting process, the international recommendations evidence that preserving Brasilia’s urban design conception is not among the goals to be achieved. Thus, this research highlights that the intentional nature of PPCUB’s plans does little towards realizing the current proposals.

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Avaliação das condições higiênico-sanitárias da produção de refeições à base de carne da alimentação escolar no município de Natal-RN

The National School Nutrition Program is the oldest program in the country directed at food and nutrition safety. Its aims are to offer nutritional food as a supplement to students of public and philanthropic schools. Studying school nutrition transcends the investigation as a purely social program, given that it reaches the fields of public health, nutrition and food, using a wide variety of approaches. Thus, it is characterized by a multidisciplinary study, where the disciplines work side by side in distinct aspects of a single problem. Aim: This study aims to assess hygiene practices during the preparation of meat-based meals in public schools in the city of Natal, Brazil. Methods: A list was applied at 27 schools to identify the procedures of good food preparation practices. In addition, cooking and meal distribution temperature were measured and a microbiological analysis of the final preparation and of the water used in preparing it was performed. For microbiological analyses of the food, we analyzed coliforms at 45°C, coliforms at 35°C and Enterococcus, and for the water, we analyzed thermotolerant coliforms and total coliforms, using the methods recommended by APHA, 1995. Results: Most of the schools did not meet the required standards in all the variables related to good food preparation practices, except for the time spent preparing the meat, in which 89% were within the norm. Cooking temperature of the meals was within the standard; however, the temperature at distribution and the time spent dispensing the meals were inadequate. Of the 27 schools, 22 (81.5%) showed the presence of coliforms at 35° C in at least one meal sample and 18 (66.7%) had values above the recommended limit for coliforms at 45°C. The presence of E. coli was identified in 6.1% of the samples analyzed. The presence of Enterococcus was not found at any of the schools. With respect to the water, the North district of the city was the only one that did not meet the standards for the two indicators evaluated. The contamination found was not associated with the hygiene or food storage problems observed. Conclusions: The results show that the hygiene-sanitary conditions of meat-based public school meals were unsatisfactory, demonstrating the need for improvements in the production process to preserve the health of the student population. Multidisciplinarity: Researchers from the areas of food microbiology, nutrition, public health and statistics took part in this study, a decisive factor for characterizing the research as multidisciplinary

O Trabalho e o labirinto da responsabilidade socioempresarial:a experiência da cidadania empresarial do Banco do Brasil

In the current systemic crisis, economic policy is directed to correct the consequences of the functioning of this metabolism, but within the limits of the capital. From this perspective, decision makers propose trade policies, agricultural and industrial to ensure conditions for economic growth. However, as a dead end, there is failure of the State in giving efficacy to the operation of all segments of the economy, especially given the budget constraint. Public managers are forced to seek external resources, resuming the cycle of political allegiance to the interests of international financial and banking representatives, installed in so-called multilateral. The complex ideological capital comes into play in trying to convince society that the paths taken by governments are inevitable, and that capitalism can be "humanized", even with the realization of the growing inequalities caused by historical irrationalism of the production process of capital . In this sense, emerging concepts that attempt to demonstrate the compatibility of the system to real human needs. This ideological offensive is intended to legitimize the capital. The so-called third sector has a special highlight with the concept of corporate social responsibility. It creates a political environment in which the inevitable mix-up with new illusions offered by and often funding the metabolism of capital in order to perpetuate this system. In this context, political elites, and considerable portions of the academy, embark on "waves of capitalist optimism," while the sociometabolismo capital expands its historical limits, driving forces postponing their collapse, but that cause human suffering and ecological stress. Wars are disseminated to strengthen the deadly war industry and the automobile industry; and devastating the environment of which depends the capital system. In this scenario disassemble, propositions emerge around a "new social pact" in order to minimize the adverse effects of the dynamics of reproduction of capital. The business class is called to exercise its role through the discourse that appeals to social responsibility programs, in order to intervene directly in the "social question". The core of this research is precisely this point. Although there is considerable scholarship on the phenomenon of Social Responsibility and Corporate Citizenship, there is also an evident lack of this approach focused on the banking sector in Brazil. The importance of rentier capital increased ownership of shares in the wealth produced by all of Brazilian society, justifies a sociological research project on Social Responsibility in the domestic financial sector. In this sense, it was decided to perform a dynamic approach to the "Corporate Citizenship" in the banking industry, specifically in the Bank of Brazil. As this is a key institution, is important analyze of the impacts of this strategy fetish of capitalist reproduction, in order to evaluate the social legitimization of rentier capital in Brazil. In this scenario of the abundance of the discourse on social responsibility there exist a progressive impoverishment of professional work in this segment in Brazil. There is a dramatic mismatch between rhetoric and practice because of the trend of deepening vulnerability of the working conditions of the Brazilian bank worker, from the 1990's. In the specific case of the Bank of Brazil, the first initiative of the institution was to conform to the principles of the UNO and the Ethos Institute, aiming to align their domestic policies to this new strategy of domination of capital. The purpose is to place the Bank in the ideological sphere of corporate social responsibility, just as with its partners in the private financial intercapitalist competition. Indeed, in the internal ambit of the Bank of Brazil, there is a policy to adjust its functional segments to the doctrine of Social Corporate Responsibility. The concepts of this doctrine is presented as something inexorable. There are no alternatives. The Bank of Brazil operates in a highly competitive market, the segment featuring the dominance of financial capital accumulation today. For this reason it can not fail to incorporate the technological advances organizational. For employees there is no alternative but to adapt to this new set of ideas proposed by the metabolism of capital

A dimensão social do desenho: um estudo sobre as interações no processo de (re) construção imagética da criança no Ensino Fundamental

In the historical-cultural perspective, the drawing is processed by means of a shared and complex way, under diverse relations with the other and with the immersed signs of the culture. That is, something constituted by the social interactions and that can modify the structure of the psychological functions, therefore as socialized sign, propitiates the incorporation of the functions socially. In this way, the figuration carrier sensitive and established meanings historically disclosing the shared experiences and the ways of the subject to think and perceive the world. Such reflections gave shape to the main problem of this research: how to think over about the drawing at the school to incide in the reconstruction of the childs imaginative language? Under such perspective, this work deals with the interactions in the production process of the drawing of the children in a context of teach-Iearning of the elementary school having as goal to analyze the interactions established in the cIassroom in the process of production of the drawings; to propose situations of learnings that favor the advance graphical expression of the students; and to identify in the interactive games some relations between body expression and drawing. For its accomplishment, it was opted for the construction process based in the collaborative investigation by the fact to propitiate negotiations, sharing and confrontation of ideas, becoming possible a joint construction of the knowledge. For this research, the researcher and the collaborating teacher, as well as the involved children, become themselves into co-authors of the context studied. As locus of the research, it was chosen a first cycle class, with 30 students, from Municipal School Profª. Emília Ramos (Natal/RN - Brazil), whose election took in account the fact of this school to constitute in a promotional space of reflections and professional development of teachers in service and, at the same time, for presentinglimitations theoretic- methodological in the field of teaching for Arts. In the process of the research, it was perceived that the children with the support of the verbal language formulates meanings on the seen and imagined object, printing lines and forms that if overlap to the physiological aspects of the visual perception. That is, the drawing discloses a reality appraised, enriched for the picked up vision of the image, but the meanings established for the author, or observer who becomes it perceivable and identified. In the systemizing situations, it was observed that the teaching-Iearning process of the drawing, implies a co-construction between teachers and learners. And, moreover, the necessity to interlace emotion and cognition by means of plastic-corporal interactions that foment drawing experiences, whose process concurs for the imagenative reconstruct of the apprentices

Sistemas de automação e supervisão do laboratório de avaliação dos processos de medição de vazão e BSW

During a petroleum well production process, It is common the slmultaneous oil and water production, in proportion that can vary from 0% up to values close to 100% of water. Moreover, the production flows can vary a lot, depending on the charaeteristies of eaeh reservoir. Thus being, the meters used in field for the flow and BSW (water in the oil) measurement must work well in wide bands of operation. For the evaluation of the operation of these meters, in the different operation conditions, a Laboratory will be built in UFRN, that has for objective to evaluate in an automatic way the processes of flow and BSW petroleum measurement, considering different operation conditions. The good acting of these meters is fundamental for the accuracy of the measures of the volumes of production liquid and rude of petroleum. For the measurement of this production, the petroleum companies use meters that should indicate the values with tha largast possible accuracy and to respect a series of conditions and minimum requirements, estabelished by the united Entrance ANP/INMETRO 19106/2000. The laboratory of Evafuation of the Processes of Measurement of Flow and BSW to be built will possess an oil tank basically, a tank of water, besides a mixer, a tank auditor, a tank for separation and a tank of residues for discard of fluids, fundamental for the evaluation of the flow metars and BSW. The whole process will be automated through the use of a Programmable Logicat Controller (CLP) and of a supervisory system.This laboratory besides allowing the evaluation of flow meters and BSW used by petroleum companies, it will make possible the development of researches related to the automation. Besides, it will be a collaborating element to the development of the Computer Engineering and Automation Department, that it will propitiate the evolution of the faculty and discente, qualifying them for a job market in continuous growth. The present work describes the project of automation of the laboratory that will be built at of UFRN. The system will be automated using a Programmable Logical Controller and a supervisory system. The programming of PLC and the screens of the supervisory system were developed in this work

Efeito da adição de colesterol e ecdisona na produção in vitro do baculovírus spodoptera frugiperda MNPV

Among the pests that attack corn crop in Brazil, there is Spodoptera frugiperda (JE Smith, 1797) (Lepidoptera: Noctuidae), known as fall armyworm, which is the major corn pest. Due to genetic instability during serial passage of baculoviruses in insect cell culture, the viral bioinseticides in vitro production development is the greatest challenge for mass production of this bioproduct. Successive passages of virus using extracellular viruses (BVs), necessary during viral bioinseticides production scaling up, leads to the appearance of aberrant forms of virus, a process so called as "passage effect ". The main consequence of passage effect is the production of occlusion bodies (OB) decrease, preventing its production using in vitro process. In this study, it was carried out a serial passage of baculovirus Spodoptera frugiperda multiple nucleopolyhedrovirus, isolate 18, using Sf21 cells. A decrease in the production of occlusion bodies from 170 to 92 in the third to fourth passage was observed. A factorial experimental design (22) was employed to verify the influence of two input variables, concentration of the hormone 20 - hydroxyecdysone (CH) and cholesterol (CC) on the values of response variables (volumetric and the specific OB production) of the process, seeking to define the optimum operating ranges trying to reverse or minimize the passage effect. The result indicated a negative influence of the cholesterol addition and positive effect in the hormone supplementation which the optimum range found for the concentrations studied were 8 to 10μg/mL and 5 to 6.5 mg / mL, for cholesterol and hormone concentrations respectively. New experiments were performed with addition of hormone and cholesterol in order to check the influence of these additives on the OB production independently. While the best result obtained from the factorial experiment was 9.4 x 107 OB/mL and 128.4 specific OB/cell, with the addition of only 6μg/mL 20-hydroxyecdysone these concentrations increased to 1.9 x 108 OB/mL and 182.9 OB/cell for volumetric and specific OB production, respectively. This result confirms that the addition of the hormone 20-hydroxyecdysone enhances the SfMNPV in vitro production process performance using Sf21 cells

Estratégias de Produção in vitro de Bioinseticida Viral: influências do Isolado, da Cinética e do Modo de operação

Societal concerns about environmental sustainability has lead to the development of ecologically-friendly alternatives to chemical insecticides for crop protection. One such alternative is biological pest control. In particular, baculoviruses are well suited as insect biopesticides due to their narrow host specificity and relative ease of propagation. In Brazil, the baculovirus Anticarsia gemmatalis nucleopolyhedrovirus (AgMNPV) is the main biological control agent employed for the soybean pest, Anticarsia gemmatalis. This baculovirus biopesticide is currently produced using caterpillars, but increasing market demand for the product has encouraged the development of an in vitro manufacturing process, which can be scaled up to much higher virus productivities. In this study, three wild-type AgMNPV isolates (AgMNPV-2D, AgMNPV-MP2 and AgMNPV-MP5) and a recombinant form (vAgEGT-LacZ) were characterised in terms of occlusion body (OB) production and infection kinetics, to enable future optimisation of the in vitro production process. These viruses were propagated using a Spodoptera frugiperda (IPLB-SF21) insect cell line grown in shaker-flask batch cultures. Among the virus isolates tested, AgMNPV-MP5 was found to be the best producer, yielding (5.3±0.85)x108 OB/mL after 8 days post infection. The characterisation of vAgEGT-LacZ propagation in suspension cell cultures has not been previously reported in the literature; hence it became the main focus for this thesis. In particular, it was carried out a study on the effect of the multiplicity of infection (MOI) on OB production. Five successive batches were performed getting a final production (8.9±1.42)x1014 occlusion bodies, considering that production is related for a bioreactor with final volume of 10m3. A low MOI associated with a fed-batch process for vAgEGT-LacZ production was found to support a 3-fold higher OB yield when compared to the default batch process (1.8x107 and 5.3x107 OB/mL, respectively). This yield is competitive with regards to the production process.

Integração de projetos no ensino através de BIM: uma abordagem dos cursos de arquitetura e urbanismo da UFRN e da UFPB

The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

A confiança interorganizacional nas compras

This research is part of the field of organizational studies, focusing on organizational purchase behavior and, specifically, trust interorganizational at the purchases. This topic is current and relevant by addressing the development of good relations between buyer-supplier that increases the exchange of information, increases the length of relationship, reduces the hierarchical controls and improves performance. Furthermore, although there is a vast literature on trust, the scientific work that deal specifically at the trust interorganizational still need further research to synthesize and validate the variables that generate this phenomenon. In this sense, this investigation is to explain the antecedents of trust interorganizational by the relationship between the variable operational performance, organizational characteristics, shared values and interpersonal relationships on purchases by manufacturing industries, in order to develop a robust literature, most consensual, that includes the current sociological and economic, considering the effect of interpersonal relationships in this phenomenon. This proposal is configured in a new vision of the antecedents of interorganizational trust, described as significant quantitative from models Morgan and Hunt (1994), Doney and Cannon (1997), Zhao and Cavusgil (2006) and Nyaga, Whipple, Lynch (2011), as well as qualitative analysis of Tacconi et al. (2011). With regard to methodological aspects, the study assumes the form of a descriptive, survey type, and causal trace theoretical and empirical. As for his nature, the investigation, explicative character, has developed a quantitative approach with the use of exploratory factor analysis and structural equation modeling SEM, with the use of IBM software SPSS Amos 18.0, using the method of maximum verisimilitude, and supported by technical bootstraping. The unit of analysis was the buyer-supplier relationship, in which the object under investigation was the supplier organization in view of the purchasing company. 237 valid questionnaires were collected among key informants, using a simple random sampling developed in manufacturing industries (SIC 10-33), located in the city of Natal and in the region of Natal. The first results of descriptive analysis demonstrate the phenomenon of interorganizational trust, in which purchasing firms believe, feel secure about the supplier. This demonstration showed high levels of intensity, predominantly among the vendors that supply the company with materials that are used directly in the production process. The exploratory and confirmatory factor analysis, performed on each variable alone, generated a set of observable and unobservable variables more consistent, giving rise to a model, that needed to be further specified. This again specify model consists of trajectories was positive, with a good fit, with a composite reliability and variance extracted satisfactory, and demonstrates convergent and discriminant validity, in which the factor loadings are significant and strong explanatory power. Given the findings that reinforce the model again specify data, suggesting a high probability that this model may be more suited for the study population, the results support the explanation that interorganizational trust depends on purchases directly from interpersonal relationships, sharing value and operating performance and indirectly of personal relationships, social networks, organizational characteristics, physical and relational aspect of performance. It is concluded that this trust can be explained by a set of interactions between these three determinants, where the focus is on interpersonal relationships, with the largest path coefficient for the factor under study

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed