Inclusão de estudantes com deficiência nas instituíções de ensino superior da cidade do Natal/RN:análise das condições oferecidas no processo seletivo vestibular

The number of disabled students, who have entered the university, in Brazil, since the beginning of this century, is undergoing a speed growth. It is a change that follows a global trend that spreads an inclusive education policy and that has had a profound impact on Brazil, with import results in field researches. This subject has been highlighted due to the significant amount of disabled students enrolled in college institutions (IES), although it is still modest the number of studies about it, especially in what matters the assistance given to the candidates to a university entrance examination. The aim of this paper is to investigate how effectively Natal s IES apply the rules established in Brazilian law concerning disabled students, especially MEC/GM Circular Warning n. 277/96, in what respects the conditions given to disabled students preparing to enter a college. The investigation followed a qualitative methodological approach with support on an exploratory study. The data recollection employed questionnaire, semi-structured interview and documental analyses, and the data have been organized and assessed following Minayo s (1996) stages. What concerns the results, it was observed that none of the ten colleges inquired confirmed to possess places exclusively to disabled candidates; six of them, however, offer Special Examining Board in the selection process of disabled candidates. Among eighteen college bills, only two of them offered specific information related to services and resources offered by IES to the candidates who ask for especial assistance concerning examination. During the interviews, four managers avowed the preoccupation in offering an equal selection process, but two of them proved not dominate the subject. In conclusion, the investigated institutions managers do not still seem to respect the rule that guarantees to disabled candidates equal conditions during all the process of the university entrance examination. With this work, we hope do help changing this focus and contribute to new studies on disabled persons studying for a degree

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Impacto do racionamento nos resultados das empresas concessionárias do serviço público de distribuição de energia elétrica: um estudo nas empresas privadas da Região Nordeste

This work verifies the impact caused by the Emergencial Program of Reduction of Consumption of Electric Energy (energy-rationing program) in the results of the concessionary private companies of the public service of electric energy distribution localized in the Northeast Area. As the rationing invigorated from June 2001 to February 2002, its effects are diluted in the results presented by these companies in the second semester of 2001 and first quarter of 2002, with prominence for the last quarter of 2001, when the revenue of extraordinary tariff restore was instituted by the National Agency of Electric Energy (ANEEL), consequence of the so-called General Agreement of the Electric Sector made between the federal government and the companies of the electric sector. The structure of a generic electric sector and a historical review of the Brazilian electric sector from the time it was controlled by the private enterprises, including the State control period, about 1960, and returning to the control of the private enterprises in 1990, under a new regulation structure are presented. An explanation of the models of economic regulation that Brazil used for the electric sector is made, with prominence for the price cap that is the actual effective model. The process of tariff revision foreseen in the concession contracts signed by the federal government and the concessionary companies is presented, highlighting its two stages: the tariff rebalancing that defines the new price cap and the calculation of the factor X that establishes the efficiency goals for the companies. There is made a presentation of the Emergencial Program of Reduction of Consumption of Electric Energy and of the consequent General Agreement of the Electric Sector, which created the revenue of extraordinary tariff restore. A conceptual revision on reviews is presented, regarding to concepts, accomplishment and recognition. A brief review of the six companies that made part of the worked sample is also presented. Analyzing the quarters historical review and of amount of sold energy, it was possible to conclude that the energy-rationing altered the results of the studied companies significantly and that alteration was masked by the accounting process of the revenue of extraordinary tariff restore

A influência do processo de terceirização de tecnologia da informação na utilização dos modelos de contratação de serviços: um estudo de casos múltiplos

The change in the economic world and the emergence of Internet as a tool for communication and integration among the markets have forced organizations to adopt a different structure, process-oriented with a focus on information management. Thus, information technology has gained prominence in the organizational context, increasing its complexity and range of services provided by this function. Moreover, outsourcing has become an important model for flexible corporate structure, helping organizations to achieve better results when carrying out their activities and processes and be more competitive. To make the IT outsourcing, it is necessary to follow certain steps that range from strategic assessment to the management of outsourced service. Such steps can influence the form of contracting services, varying the types of service providers and contractors. Thus, the study aimed to identify how this IT outsourcing process influences the use of models for contracting services. For this, a study was conducted in multiple cases study involving two companies in Rio Grande do Norte State, specifically the health sector. Data collection was carried out with the CIOs of the companies surveyed through semi-structured interviews. According to the results obtained, it was found that the outsourcing process more structured influences the use of a more advanced contracting model. However, there are features found in these steps carrying more clearly this influence, as the goals pursued by outsourcing, the criteria used in selecting the supplier, a contract negotiation, how to transition services and the use of methods management, but can vary depending on the level of maturity in the relationship of the companies examined. Moreover, it was found that the use of contracting model may also influence how it is developed the IT outsourcing process, requiring or not its more formalized and organization

Projeto em Áreas Consolidadas de Patrimônio Cultural: Propostas para a Construção de uma Metodologia de Ensino

Le thème du patrimoine culturel architectural et urbain continue d avoir une place importante dans le milieu technique et scientifique. Le concept s est élargi et aujourd hui comprend différentes procédures de projets d intervention. L importance accordée au thème amène à l inclusion de la matière de techniques rétrospectives et aux contenus qui en sont liés: conservation, restauration, restructuration et reconstruction d édifices et ensembles urbains, dans les parcours des cours d architecture et d urbanisme au Brésil établies par le Ministère de l Education Nationale (MEC) dans les années quatre-vingt-dix, postérieurement incorporés dans les directrices disciplinaires nationales. Nous partons des discussions théoriques et conceptuelles du Domaine du Patrimoine Culturel, ainsi que des principales théories pédagogiques d enseignements et d apprentissage articulées au projet. Dans ce contexte les objectifs principaux de cette thèse consistent à systématiser et à analyser les principales procédures méthodologiques contribuant pour la construction de méthodes d enseignement tournée vers des activités pratiques dans ce domaine. Pour cela, la recherche a été systématisée dans une approche à deux niveaux. En ce qui concerne le premier, basé sur des données secondaires, neuf cours d architecture et urbanisme ont étés identifiés entre institutions publiques d enseignement supérieur dont huit brésiliennes et une française, considérées représentatives en ce qui concerne les pratiques d enseignement de projet et de patrimoine culturel. Trente disciplines dédiées à la matière ont été également reconnues initialement, et postérieurement, cinq disciplines qui possèdent un emploi du temps dédié à la pratique de projet ont aussi été reconnues. Dans le deuxième cas, basée sur des données primaires, ont étés analysées les méthodologies et les stratégies d enseignement de projet basées sur les définitions des matières et des autres éléments des plans de travail avec des observations, des entrevues et des questionnaires en trois ateliers. Par rapport aux résultats nous avons constaté que toutes les écoles possèdent les contenus de la matière, mais peu d entre elles privilégient la relation du projet appliqué au patrimoine culturel. Nous avons constaté que les questions des projets dans ce contexte, même s elles sont considérées complexes, ont privilégié le listage et l analyse du site. L atelier qui intègre les fondements des théories de préservation, l histoire de l architecture et urbanisme et techniques anciennes et actuelles, est mis en valeur comme un modèle cohérent avec les propositions d intégration des connaissances théoriques et pratiques du projet appliqué à la discipline. Basé sur ces constatations il est possible de démontrer quatre étapes du projet appliqué au patrimoine culturel: 1ª) les fondements généraux qui concernent les bases théoriques sur la préservation, histoire et technique rétrospective, par exemple, l appropriation de lois et normes et la sensibilisation de l élève sur les questions de patrimoine culturel; 2ª) le contacte avec la réalité qui inclut l appropriation du problème à partir de ces acteurs, de ces échelles, de cette lecture de site et l analyse de l objet d étude; 3ª) le développement de la proposition qui inclut programmes (fonctions existantes et propositions), définitions du partit (types d intervention), conception (hypothèse et discussion) et définition de proposition; 4ª) la finalisation du projet qui consiste à développer la proposition avec sa représentation graphique et sa présentation finale. Nous concluons que le projet en Domaine du Patrimoine Culturel demande une attention spéciale et doit être présent dans les cursus considérant les principes généraux nécessaires à la formation de l élève. Le binôme projet / patrimoine signifie avoir dans le cursus universitaire les contenus et questions nécessaires les connaissances, les variables et possibilités existantes dans le projet appliqué au patrimoine culturel de façon à ce que ces connaissances soient incorporées dans l exercice de projet et n apparaissent pas comme un simple contenu théorique sans articulation avec la pratique. Naturellement ces conclusions n épuisent pas la réflexion sur la question. Nous espérons que les analyses faites contribuent à définir des méthodologies d enseignements capables d êtres vérifiées et testées dans la pratique en salle de cours, et puisse collaborer avec les nouvelles recherches surtout celles qui ont pour but des nouvelles théories pédagogiques d enseignement apprentissage du projet en Domaine du Patrimoine Culturel

Síntese e caracterização do poli(ácido láctico) para potencial uso em sistemas de liberação controlada de fármacos

With the advances in medicine, life expectancy of the world population has grown considerably in recent decades. Studies have been performed in order to maintain the quality of life through the development of new drugs and new surgical procedures. Biomaterials is an example of the researches to improve quality of life, and its use goes from the reconstruction of tissues and organs affected by diseases or other types of failure, to use in drug delivery system able to prolong the drug in the body and increase its bioavailability. Biopolymers are a class of biomaterials widely targeted by researchers since they have ideal properties for biomedical applications, such as high biocompatibility and biodegradability. Poly (lactic acid) (PLA) is a biopolymer used as a biomaterial and its monomer, lactic acid, is eliminated by the Krebs Cycle (citric acid cycle). It is possible to synthesize PLA through various synthesis routes, however, the direct polycondensation is cheaper due the use of few steps of polymerization. In this work we used experimental design (DOE) to produce PLAs with different molecular weight from the direct polycondensation of lactic acid, with characteristics suitable for use in drug delivery system (DDS). Through the experimental design it was noted that the time of esterification, in the direct polycondensation, is the most important stage to obtain a higher molecular weight. The Fourier Transform Infrared (FTIR) spectrograms obtained were equivalent to the PLAs available in the literature. Results of Differential Scanning Calorimetry (DSC) showed that all PLAs produced are semicrystalline with glass transition temperatures (Tgs) ranging between 36 - 48 °C, and melting temperatures (Tm) ranging from 117 to 130 °C. The PLAs molecular weight characterized from Size Exclusion Chromatography (SEC), varied from 1000 to 11,000 g/mol. PLAs obtained showed a fibrous morphology characterized by Scanning Electron Microscopy (SEM)

Formulação e caracterização de pastas espumadas por incorporação de ar e estabilizantes minerais

Cementing operations may occur at various stages of the life cycle of an oil well since its construction until its definitive abandonment. There are some situations in which the interest zones are depleted or have low fracture pressure. In such cases, the adoption of lowdensity cement slurries is an efficient solution. To this end, there are basically three ways to reduce the density of cement slurries: using microspheres, water extending additives or foamed cement. The objective of this study is to formulate, to study and to characterize lowdensity foamed cement, using an air entrainment surfactant with vermiculite or diatomite as water extenders and stabilizers. The methodology consists on preparation and evaluation of the slurries under the American Petroleum Institute (API) and the Brazilian Association of Technical Standards (ABNT) guidelines. Based on calculated densities between 13 and 15 ppg (1.559 and 1.799 g/cm3), the slurries were prepared with fixed surfactant concentration, varying the concentrations of vermiculite and diatomite and were compared with the base slurries. The results of plastic viscosity, yield point and gel strength and the compressive strength for 24 h showed that the slurries presented suitable rheology and mechanical strength for cementing operations in oil wells, and had their densities reduced between 8.40 and 11.89 ppg (1.007 and 1.426 g/cm3). The conclusion is that is possible, under atmospheric conditions, to obtain light weighted foamed cement slurries with satisfactory rheological and mechanical properties by means of air entrainment and mineral additions with extenders and stabilizers effects. The slurries have great potential for cementing operations; applicability in deep wells, in low fracture gradient formations and in depleted zones and bring cost savings by reducing the cementing consumption

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

Era um sonho desde criança : a representação social da docência para os professores do município de Queimadas-PB

The objective of this work was to access and understand the teaching social representation (MOSCOVICI, 2005) for the teachers of the children education and fundamental education at Queimadas city, Paraíba. We assume that one representation that allows the teacher to name its profession and to act on it, is a derivative of regularities that are expressed by means of a habitus (BOURDIEU, 1983a), generative matrix of perception and action. This teaching habitus is originated from the experiences and the trajectories of social and professional life of the group. Therefore, from some variables, we tried to access the profile of the group of teachers studied and to get closer of their life style to understand their profession choice and the teaching social representation for this group. In this research, it was used four data sources: a) the questionnaires of characterization; b) the questionnaires of practices and meanings; c) the experience reports and; d) the interviews in depth. The analysis of the data collected was done by means of the simple statistics (frequency), the intersection of variables through cross tables and, the thematic analysis of the contents. The results show that there is a lightly homogeneous group in terms of its social origin and its life style, moreover, they conduct to an overlap between this origin/style and the professional choice. On the other hand, the teacher representation is multi-dimensional such that, all dimensions intercept and articulate with each other to provide a concise teacher representation. They are four dimensions: love and care, help and donation, teaching and learning and, sacrifice and hope. The elements of the teacher representation are substantiated in the schemes of perception and appreciation of the group, in the regularities and life experiences in the context of religion, family, gender and profession. In these regularities we find the elements that comprise the teaching habitus which drives perception and action, representation and daily practice of these teachers. The teaching social representation is still perceived as a threshold for the professional identity of the group of teachers considered. We also observed that there are signs of changes in the practices used by these professionals since they graduate from the course of pedagogy. However, it is not possible to say that these changes are isolated or they lead to a transformation in the teaching habitus or the teaching social representation

Desenvolvimento e validação de protótipo das medidas de desenvolvimento humano

To mesure the human performance is a challenge, mainly due to the multidimensional factor movement. Instruments, mostly only assess one dimension of it. Objective: To develop a prototype capable of measuring the skills of human performance and check its validity using method comparison approach. Methods: The study was divided into two stages. The first Prototype was developed and tested simultaneously with an instrument to study the Rectilinear Uniform Motion and Uniformly Miscellaneous. In the second phase the sample consisted of Paralympic basketball athletes (n=09) and karate athletes (n=31) and all agreed to the terms of participation in the research. The evaluation of performance measures was performed with the prototype, the results obtained were compared with the data calculated by a statistical package is used as a reference. Results: All variables calculated by the prototype showed no significant differences when compared with the results calculated by the reference instrument and statistical package. Conclusion: The prototype has been developed and the results obtained in laboratory and field indicate that the prototype can be used for measuring human performance measures, with immediate results without the need for a conventional computer return, provided they fulfill the criteria described

Protocolo de avaliação do cuidado de enfermagem e da segurança do paciente em unidades de terapia intensiva

The reports of adverse events date from 1990 up to the present day. Conceptually, these adverse events are unintentional injuries unrelated to the underlying disease, causing measurable lesions in patients, extending the period of hospitalization, or leading to death. These issues require discussions with regard to patient safety, improved quality of service, and preventing medical errors. In the Intensive Care Units, this concern is greater because these are sectors of intensive care to individuals with hemodynamic changes and imminent risk of death. Therefore, it is essential to conduct evaluation processes to investigate aspects of quality of nursing care and patient safety in these spaces. For that reason, we aimed to propose the Evaluation protocol of nursing care and patient safety in Intensive Care Units. For its achievement, we needed to: 1) analyze the evolution of the patient safety concept used in scientific productions, under Rodgers evolutionary concept; 2) identify the necessary items to build the evaluation protocol of nursing care and patient safety in the Intensive Care Unit, from the available evidence in literature; 3) construct an instrument for content validation of the evaluation protocol of nursing care and patient safety in the Intensive Care Unit; and 4) describe and evaluate the appropriateness of the content for an evaluation protocol of nursing care and patient safety in the Intensive Care Unit. This is a methodological study for the content validation of the abovementioned protocol. To meet the first three specific objectives, we used the integrative literature review in Theses Database of the Coordination for the Improvement of Higher Education Personnel and the portal of the Collaborating Centre for Quality of Care and Patient Safety. The fourth specific objective happened through the participation of judges, located from the Lattes curricula, in the content validation process developed in two stages: Delphi 1 and Delphi 2. As instrument, we used the electronic form of Google docs. We present in tables the answers from the evaluation instruments by Delphi consensus and Content Validity Index (CVI) of the entire protocol. We summarized the results in articles entitled Analysis of the patient safety concept: Rodgers evolutionary concept ; Scientific evidence regarding patient safety in the Intensive Care Unit ; Technological device for the content validation process: experience report ; and Evaluation protocol of nursing care and patient safety in Intensive Care Units. The Embodied Opinion of the Research Ethics Committee of the Universidade Federal do Rio Grande do Norte, No. 461,246, under CAAE 19586813.2.0000.5537, approved the study. Thus, we conclude the protocol valid in its content, constituting an important tool for evaluating the quality of nursing care and patient safety in Intensive Care Units

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

O espaço formativo na escola: um estudo com professoras dos 4º e 5º anos do ensino fundamental.

Es extensa, de parte de los docentes, la discusión sobre la articulación de actividades y estrategias de enseñanza que vengan a proporcionar una participación más activa del alumnado. Sin embargo tal tarea constituye un desafío para muchos profesores ya que, muchas veces, la formación inicial no siempre los prepara para esta perspectiva. Nosotros entendemos que es necesario desarrollar en los maestros una autonomía crítica, tomando la escuela como espacio formativo. El objetivo de este trabajo fue él de incentivar un espacio de discusión y reflexión para profesores en ejercicio de los 4° y 5° años de la Enseñanza Fundamental I. Ese espacio que era orientado para que ellos estudiasen y articulasen, entre otras cosas, el conocimiento disciplinar de Ciencias y la organización y sistematización de actividades de enseñanza que lleven a una participación más activa de los estudiantes. La investigación se realizó en una escuela privada de Natal/RN, que atiende a estudiantes desde la educación infantil hasta la enseñanza secundaria. Se desarrolló en cuatro fases: la 1ª, de familiarización, cuyo objeto de estudio se dio a través de la observación del salón de clase y del análisis de la planificación anual: la 2ª, de identificación de las dificultades de los maestros, teniendo como instrumentos encuestas con preguntas abiertas y elaboración de textos. La 3ª, en la perspectiva de proporcionar una intervención, se usó como instrumentos de investigación, el diario de clase y otras actividades como talleres, cursos y la elaboración de material didáctico. En la 4ª fase, para reconocer los posibles cambios en la práctica docente, ocurrieron nuevas observaciones en el salón de clase, el análisis de las planificaciones. Los datos obtenidos fueron organizados en tablas y clasificados. Los resultados señalan cambios en la práctica de esos profesionales, la introducción de la disciplina de Ciencias en el espacio formativo y el material didáctico elaborado ha sido un subsidio importante para ayudarlos en las clases

Caracterização comportamental endócrina das fases ontogenéticas de sagüi comum (Callithrix jacchus)

The use of animal models in biomedical research is ever increasing. Models that use primates might also have advantages in terms of low maintenance costs and availability of biological knowledge, thereby favoring their use in different experimental protocols. Many current stress studies use animal models at different developmental stages since biological response differs during ontogeny. The aims of this study were to perform a detailed characterization of the developmental stages of common marmosets (Callithrix jacchus), a very important animal model used in biomedical research. Ten subjects, 6 females and 4 males, were followed from birth to initial adult age (16 months). Behavioral and fecal collection for measurement of adrenal (cortisol) and sex (progesterone, estradiol and androgens) hormones took place twice a week during the first month of life and once a week for the remainder of the study. Behavior was observed for 30 minutes in the morning (0700-09:00h) and afternoon (12:00-14:00h). Behavioral profile showed changes during ontogeny, characterizing the 4 developmental stages and the respective phases proposed by Leão et al (2009).. Differentiation of developmental stages was considered using the onset, end, change and stabilization of the behavioral profile parental care (weaning and carrying), ingestion (solid food), affiliation (social grooming) and autogrooming, agonism (scent marking and piloerection) and play behavior and endocrine profile. Infant weaning and carrying terminated within the infantile stage and the peak of solid food ingestion was recorded in the infantile III phase. Receiving grooming was recorded earlier than grooming performed by the infant and autogrooming. The first episode of scent marking was recorded in the 4th week and it was the least variable behavior, in terms of its onset, which, in almost all animals, was between the 5th and 7th week of life. Solitary play and play with the twin started around the 7th week and play with other members of the group started 8 weeks later. Sex hormone secretion started to differ from basal levels between the 21st and 23rd week of life, in males and females, suggesting that puberty occurs simultaneously in both sexes. Basal cortisol, even at an early age, was higher in females than in males. However, cortisol was not correlated with the juvenile stage, as expected, since this stage corresponds to the transition between infancy and adult age and most behaviors are intensified by this time. The behavioral and endocrine profile of subadult animals did not differ from that of the adults. These results provide more detailed parameters for the developmental process of C. jacchus and open new perspectives for the use of experimental approaches focused on the intermediate ontogenetic phases of this species