42 resultados para concentrado
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The use of membrane filters in the post-treatment of sewage has been increasingly employed to obtain water quality, applicable to various forms of reuse. Despite the advantages presented using the permeate membranes, such as saving water and reducing water pollution, the concentrate generated in the process ends up being an inconvenience to the deployment of this technology due to lack of sustainable solutions for their management. Thus, the main objective of this research was to evaluate the use of membranes for microfiltration, ultrafiltration, nanofiltration and reverse osmosis concentrated in agriculture, using it as liquid fertilizer. The permeated membranes were also assessed in order to identify activities in which they could be reused. Five configurations were established from four types of membranes, so that each configuration represents a different system. The tests were conducted in batch mode, with triplicate for each configuration. The results indicated that permeated the microfiltration and ultrafiltration can be used in urban areas, in non-potable uses. Have the nanofiltration permeate can be reused in the industry, replacement cooling towers, and other non -potable uses required in the manufacturing unit. The permeate obtained in reverse osmosis met the intended uses for nanofiltration as well as the standards required for boiler feed, adding alkalizing being required to raise the pH to the recommended value. Concentrates generated in nanofiltration and reverse osmosis can be availed as liquid fertilizer in agriculture, but they must be diluted in the irrigation water, in order to adjust the salt concentration allowed for the least tolerant crops patterns
Resumo:
A partially hydrolyzed polyacrylamide (HPAM) is a copolymer composed of acrylamide and sodium acrylate. Due to its wide range of applications there are different methods for its quantification and characterization in solution systems. Evaluation of C* is important to describe the transition from dilute to semi-dilute, behavior, when the solution will have its characteristic viscosity at concentrations above C*. This dissertation describes the determination of the critical concentration of overlap C* by potentiometry of partially hydrolyzed polyacrylamide - HPAM under acidic conditions. Based on the law of mass action and the proper treatment of the constant of aggregate formation, polymer molecular weight, degree of polymerization and hydrolysis were calculated. The inflection point was determined by the intersection of the resulting equation and mathematical development, statistically satisfy the experimental points relating the number of moles of monomers (n), equilibrium constant of formation of the entanglements (K*), pH, C* and acidity constant of the polymer (Ka). The viscometric parameters of C* showed a percentage difference compared to potentiometers. The results for the determination of C*, and degree of copolymerization molar mass proved to be a simple alternative for the characterization of polymers with protonated monomers and water soluble
Resumo:
This master thesis aims to research the tension established between the judicial review and democratic theory which was always present in the constitutional doctrine of separation of powers. In this regard, the expansion of the Brazilian constitutional jurisdiction checked after the occurrence of the Federal Constitution of 1988 and the inertia of the Legislature in disciplinary relevant legal aspects of Brazilian society contributed to a hyperactivity of the Supreme Court. However, in a complex society of context, as is the Brazilian society, there are contained demands and political controversies that hardly would be well represented or resolved through the action of the Court of ministers at the expense of other government bodies. Among the supremacy of Parliament and the legitimacy deficit of these magistrates, is the constitutional text and the social fabric that makes this legal status of the political. Participatory democracy established by the guidelines of the Federal Constitution requires this perspective when the Supreme Court acting in place of concentrated constitutionality control. In a plural society, there is no reason to get rid of state decision moments popular participation. Lack the Supreme Court, this time, the democratizing perception that the institute brings to the interior of the Court, as state determination of space in which to come together and meet the aspirations of society and state claims. The dissertation investigates thus the possibility of amicus curiae Institute serve as a mediator of the democratic debate, to assist the Supreme Court in the preparation of the decision is, historically, that which is of greater legitimacy, from the perspective of a theory participatory democracy. Analyzes, likewise, the unfolding of abstract judicial review in the context of Brazilian law. Proposes, incidentally, a rereading of the separation of powers, with the call for the Judiciary be careful not to become the protagonist of national political decisions. It maintains, finally, that procedural opening the interpreters of the constitution, through the amicus curiae Institute, shows up as able to decrease the legitimacy deficit in the performance of the Brazilian Supreme Court.
Resumo:
Despite the numerous advantages resulting from the use of membrane filters technology, intrinsic limitations fouling process become relevant to its applicability. The control of operating conditions is an important tool to mitigate fouling and achieve good levels of efficiency. In this sense, the objective of this study was to investigate the effect of transmembrane pressure and concentrate flow in the performance of ultrafiltration, applied to the post-treatment of domestic sewage. The process was evaluated and optimized by varying the pressure (0.5 and 1.5 bar) and the concentrate flow (300 and 600 L/h), using a 22 factorial design, in order to investigate the effects on the permeate flow and quality of effluents generated at each operating condition. We evaluated the following quality indicators for permeate: pH, electrical conductivity, total suspended solids, turbidity, calcium and Chemical Oxygen Demand (COD). In all tests, we observed marked reduction in the permeate flux at the early stages, followed by a slow decline that lasted until it reaches a relatively constant level, around 120 minutes of filtration. The increased pressure resulted in a higher initial permeate flux, but the decrease of the flow with time is greater for tests at higher pressure, indicating a more pronounced fouling process. On the other hand, increasing the concentrate flow resulted in a slower decline in permeate flux with the filtration time. Regarding the quality of permeate, the transmembrane pressure of 0,5 bar was the one that allowed better results, and was statistically confirmed through the two-way ANOVA test with repeated measures, significant effect of pressure on the turbidity of the permeate. The concentrate flow, in turn, showed no significant influence on any of the quality parameters. Thus, we conclude that, from an economic and environmental point of view, it is more interesting to operate ultrafiltration membrane system with a lower concentrate flow associated with a low transmembrane pressure, since under these conditions will produce less waste, and the permeate will present lower concentrations of the analyzed constituent, especially lower turbidity.
Resumo:
The caprine milk is a product of high biological value and high digestibility. Due to these characteristics it is quite used by newly born children that are not breastfed or that are intolerant to the bovine milk. The vitamin deficiency is a public health problem in underdeveloped areas as the Northeast of Brazil and where areas the caprine ones adapt very well. The present study was led to analyze the influence of the feeding in the vitamin levels in the caprine milk. The animals used were the races Saanen and Murciana, divided in three groups. The first group with 38 animals of race Saanen and the second with 30 animals of race Murciana were, fed with concentrated and voluminous. A third group with 20 animals of the race Saanen was fed exclusively with voluminous. The four group was added with 10. 000 UI of retinol palmitato, administered directly, like capsule, in the mouth of animal. Parallel it was verified the level of retinol of milk in the beginning and final of the sucked, in the goats of the second group (race Murciana n =30). The retinol of caprine milk was determined through the system of liquid cromatografia of high efficiency (HPLC). The retinol levels in the studied groups were respectively: first (38. 5 ± 12. 7 μg/100ml), second (40. 5 ± 9. 7 μg/100ml); third, with 20 animals of race Saanen fed exclusively with voluminous (23. 1 ± 6. 7 μg/100ml) and in the group a, suplementation with 10. 000 UI of retinol palmitato (43,7 ± 18,8 μg/100ml) before, and (61,9 ± 26,9 μg/100ml) after the supplementation. It was not found significant difference between the averages from animals of the first and second group, that were fed with the same concentrate diet and voluminous, showing that the retinol levels in the milk of these two races are equivalent. Already in the animals of the first and third group that they were fed with different diets, in those which diet was just voluminous, a drastic reduction was verified in the retinol levels. In relation to the retinol of the milk in different moments from the same sucked, it was observed in the beginning of the breast-feeding (22. 6 ± 9. 8 μg/100ml) and at the end of the sucked (49. 6 ± 14. 7μg/100ml), being the difference between the averages, statistically significant (p < 0,0001). Already in the animals that were supplemented, a significant increase was observed in the retinol concentration, being obtained a medium response of 41,85%
Resumo:
Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes
Resumo:
The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min
Resumo:
Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor
Resumo:
Universidade Federal do Rio Grande do Norte
Resumo:
Objective: To determine the clinical maternal and neonatal outcomes in HELLP syndrome patients treated with dexamethasone who either developed renal injury or renal insufficiency and to identify predictive values of urea and creatinine for the identification of subjects with HELLP syndrome at risk of developing renal insufficiency. Methods: Non-radomized intervention study of dexamethasone use in HELLP syndrome. A total of 62 patients were enrolled at Maternidade Escola Januário Cicco (MEJC). Patients received a total of 30 mg of dexamethasone IV, in three doses of 10 mg every 12 hours. A clinical and laboratory follow up were performed at 24, 48 and 72 hours. Patients were followed up to 6 months after delivery. Patients were grouped in accordance to renal function, i.e, normal and some type of renal lesion. Renal lesion was considered when creatinine was equal or greater than 1.3 mg/dl and diuresis less than 100 ml in 4 hours period and renal insufficiency was defined when dialysis was needed. Results: A total of 1230 patients with preeclampsia were admitted at MEJC. Of those 62 (5%) developed HELLP syndrome. There was no statistical difference in the groups with renal involvement or normal renal function with respect to the demographics, type of anesthesia used and delivery, and weight of the newborn. An improvement in the AST, ALT, LDH, haptoglobine, antithrombine, fibrinogenen and platelets was observed within 72 hours after dexamethosone use. There was a significant increase in the diuresis within the interval of 6 hours before the delivery and 24 hours after it. Of the 62 patients, 46 (74. 2%) had normal renal function and 16 (25.8%) evolved with renal lesion, with 5 (8.1%) needing dialysis. These 5 patients who received dialysis recovered the xi renal function. The delay in administering dexamethasone increased in 4.6% the risk of development of renal insufficiency. Patients with renal insufficiency had received significantly more blood products than subjects without renal lesion (p=0.03). Diuresis, leukocytes, uric acid, urea, creatinine were significantly different between the groups with normal renal function, renal lesion and renal insufficiency. The levels of creatinine 1.2mg/dl and uric acid 51mg/dl, at admission are predictive of subjects who will evolve with renal lesion (p<0.001). Maternal mortality was 3.2%. None of the subjects with renal insufficiency evolved with chronic renal disease. Conclusions: Dexamethasone in patients with HELLP syndrome seems to reduce significantly the hepatic microthrombosis and normalize hemostasis as seen by improvement of liver function. Renal injury can be considered, in HELLP syndrome, when creatinine levels are greater than 1.3 mg/dl and diuresis less than 100 ml/h in interval of 4 hours. The level of creatinine greater than 1.2 mg/dl and urea greater than 51mg/dl are predictive of subjects with HELLP syndrome who will develop renal injury. Patients who receive more red cell packs develop renal insufficiency. Finally, the delay in administering dexamethasone increases the risk of developing renal insufficiency
Resumo:
The following study aims to verify in which hypothesis res judicata, when it comes of an unconstitutional decision, shall not prevail over Constitution. It displayed the characteristics of formal and material constitutional systems. It debated the concepts of existence, validity and efficacy of juridical rules and acts. It dissertated about the idea of Constitution s superiority and about the birth of the judicial review of constitutionality. It focused some contemporary models of this judicial review and its historical evolution in Brazil, showing its effects towards the current Constitution. It sustained that the decision given by Supremo Tribunal Federal during abstract control of rules must bind even legislative bodies, preventing them to produce the same rules previously declared unconstitutional. It held up that all parts of the decision of Supremo Tribunal Federal oblige, even the juridical arguments employed, in both diffused and concentrated reviews. It showed that, despite these models of review live together in Brazil, our constitutional system preferred the concentrated one, considering one only court over the other constitutional organs. It discussed about res judicata with the purpose of clarifying its juridical nature, its objective and subjective limits and its regulation in collective demands. It explained that the material res judicata is an effect of a decision which cannot be reviewed, which makes the law s will free of discussion, binding the contendants and avoiding that other courts, judging future demands about the same object, may decide differently. It showed how the regulation of res judicata in collective demands, in respect oh their subjective limits, is useful to demonstrate that it is not the material law who must adapt itself to res judicata as traditionally thought, but res judicata, as a warranty of juridical certainty and security, who must be shaped from the debated rule. It presented to view the main doctrinal conceptions about res judicata s review in the hypothesis of unconstitutional judgement. It concluded that the decisions forged by unconstitutional rules or interpretations reputed not compatible to the Constitution by Supremo Tribunal Federal, in spite of it can make res judicata, may be reviewed beyond the term to file a recissory claim, since while the debated law is still valid, no matter if its decision was before or after the res judicata. At the end, it asserted that, when it is not legally authorized, the judicial review of res judicata is not admissible, after the term to file a recissory claim, under the argument that there was no direct violation to the constitutional principle or rule
Resumo:
Brazil since its first republican constitution has adopted systems of laws control. The review activity was given to three state powers or functions state, Executive, Legislative and Judiciary. However, it appears that in the country along the constitutional history, has stood considerably the jurisdictional control of the most important control. Initially, back in 1891, Brazil adopted the jurisdictional control of diffuse from U.S, whose role in monitoring of standards is delivered to all organs of the judiciary, which may face a case, put on trial, ascertain whether or not the possibility of applying a law, removing its impact in case of unconstitutionality. In 1969, entered in the second legal model of judicial review, the concentrated control of constitutionality, whose inspiration comes from the positivist theory of Hans Kelsen, and was adopted by the Austrian Constitution of 1920. According to the abstract control the supervision of law is given to a Court or Constitutional Court, responsible for the analysis of the legal constitutionality independent of its application to a specific case. In Brazil the role of concentrated control was handed over exclusively to the Supreme Court, which serves as the Constitutional Court, which accumulates that function with other constitutionally provided jurisdiction. Throughout this period, from 1891 until today, Brazil has maintained a dual system of judicial control of legal constitutionality, where they coexist and harmonize the diffuse control exercised by any organ of the Judiciary, and concentrated control of competence the Supreme Court. However, one must recognize that with the advent of the Federal Constitution of 1988, the concentrated control has emerged on the national stage due to two important factors: the expansion of the legal capacity to sue and the inclusion of other ways control, besides the already known Direct Claim of Unconstitutionality. This concentrated control and projection of the Supreme Court s attempt to become a true constitutional court, led to a relative weakening of diffuse control even when performed by the Brazilian Constitutional Court. In order to become a true constitutional court, all decisions handed down by the Supreme in the exercise of constitutional jurisdiction should have the same weight and the same measure, or at least bring improvement to similar effects, once is the responsible for the final word when it comes to constitutional interpretation. Thus, the writs of certiorari and stare decisis were responsible for profound changes in the diffuse control, allowing the Supreme Court can strengthen its decisions even in the diffuse control. These two institutions have substantially changed the legal status of diffuse control, allowing an extension of the effects of decisions handed down by the Supreme Court, so that you can no longer be said that the effects of this control to restrict the disputing parties in the process
Resumo:
This document approaches the formal and material limits of the constitucionalidade control for the Supreme Federal Court, iniating with the study of the Constitution, detaching its evolution, nature and meanings, passing for its historical evolution, offering still a unconstitutionality concept. Is work the principles as material Constitution, making the distinction entere principles and rules, detaching the characteristics of the principles constitutional, and the basic principle of the Constituition. It analyzes metodologics the historical parameters and of the brazilian system of constitutionality control and detaches the paper of the Supreme Federal Court as positive legislator. It observes the beddings of the constitutionality control and the legitimacy of the Supreme Federal Court. Is examines the performance of the Supreme Federal Court in face of the principle of the legal security. Is offers a vision on the experience of the control of constitutionality in other constries. It still approaches the control of constitutionality in Brazil, detaching the critical points of its formal and material limits. Is verifies the application of the principles constitutional for the Supreme Federal Court in the diffuse control and the intent control of constitutionality, as well as the performance of the Supreme Federal Court ahead of the unconstitutional omissions. It brings to the debate the new perspectives how much to the formal and material limits of the control of constitutionality for the Supreme Federal Court. Objective to elaborate considerations concerning the limits of the constitutional jurisdiction from the model of Constituition, the character politican of the difficulties with respect to the definition of its formal and material limits from the performance of the Supreme Federal Court
Resumo:
Industrial development experienced by Brazil from the 1950s, changed the concentration of population in the country. The process of development of domestic industry, concentrated in urban areas, crowded growing portion of the population.The Southeast region during the first stage of industrialization driven by the state, with the implementation of Plan goals, captained the major industrial projects implemented in the period and became the main industrial center of the country.In the decade from 1960 to 1980 the state action was marked by numerous regional development projects, softening the industrial concentration and Brazilian investment redirected to the Northeast.The second National Development Plan implemented in the 1970s led to major investments Northeast.This period marked the widespread urban growth and institutionalization of the first metropolitan areas in Brazil.The change of this developmental process is altered with the fiscal and financial crisis of the state in the 1980s and 1990s and spending cuts aimed at national development, reorienting the economy to liberal policies of economic liberalization and reduction of activity in the economy.Industrial policy was relegated to local development plans from the 1990s to the federating units fitting the wide use of tax incentives, the "war tax" to the continued industrialization process.In this context of the national economy work seeks to analyze the industrial setting in the metropolitan areas of Fortaleza, Recife and Salvador between 1995 and 2010.Although the metropolitan areas of Fortaleza, Recife and Salvador are the main urban centers of the Northeast, responsible for the advancement of industrial development, reconfigurations occurred between 1995 and 2010 by changing the level of industrial specialization built by regional division of labor in these regions.The work will be carried out by the method of descriptive analysis of the literature review on regional and urban development.Constitute quantitative method as the secondary data analysis of formal employment from the Annual Social Information (RAIS) Ministry of Labour and Employment (MTE).Using data RAIS / MTE analyzes the industrial specialization index using the Locational Quotient (LQ).Thus, it is assumed as a parameter analysis QL> 1, when the region has become specialized in a particular sector or QL <1, when the region does not have expertise in industrial sector analyzed.The conclusion of study indicates that there was in these metropolitan areas maintained the same bias hub.Fiscal policies, the states, was not successful in diversifying the productive structure and the Northeast region itself.This result is demonstrated by the need and dependence on state investments in the region to promote development.Industrial policies of recent years have been positive to meet the objectives of employment generation, but there must be specific policies for better diversification of production, in addition to integrating the economy of the Northeast sector and regionally
Resumo:
The Balanced Scorecard (BSC) has been used as a communication tool and strategy monitoring, helping organizations alignment, inserting a new vision with integrated use of performance indicators nonfinancial together with some financial measures. Their proper use leads to a new management style, focused on management strategies, using for this, basically three dimensions: strategy, which should be translated as the primary responsibility for the organizational agenda, the focus that should be concentrated, and the organization with the mobilization of employees. This paper deals with theoretical considerations about strategies, strategic planning, BSC and principles of the organization focused on strategy (OFE). Describes a study of four companies that won the National Quality Award - PNQ, among which, three have adopted the BSC and adopts a particular model of strategic management. The research aimed to make an analysis of the companies regarding adherence to the five principles of OFE, proposed by the BSC, seeking to answer whether the use of BSC is a prerequisite for accession to the Principles of OFE. The results showed that the BSC is a strategic management model that promotes focus and organizational alignment and is a major facilitator in the process, however, cannot be considered a prerequisite for accession to the principles of the OFE, because the four companies studied, including the one that adopt its own model of strategic management, have great levels of adherence to such principles. Making the organization focused on strategy can be considered a natural movement essential for the strategic management, which is not necessarily conditioned by the use of BSC