Crescimento econômico e restrição externa: evidências empíricas na economia brasileira (1991-2010)

This study aims to investigate the influence of the balance of payments constrained on economic growth in Brazil from 1991 to 2010. With this order, are shown some of the Keynesian balance of payments constrained growth models, inspired by Thirlwall (1979) and Kaldor (1970), which are supported by important points in common, such as adherence to the principle of effective demand. Given that within this theoretical perspective, there is no consensus about the best model to explain the growth rate allowed by the balance of payments constraint, the results are presented by the representative of the empirical literature that addresses the topic, which are necessary for understand the Brazilian case. From the estimation of the income elasticity of imports (0.85) via autoregressive vectors with error correction (VEC), it was calculated five growth rates of income, as predicted by the models of Thirlwall (1979), Thirlwall and Hussain (1982), Moreno-Brid (1998, 2003) and Lourenço et al. (2011) and compared with the actual growth rate. The empirical analysis has shown that: it can not reject the presence of external constraint in the Brazilian economy, there is a strong similarity in growth rates provided by different modeling suggest that growth with external constraint. In addition, when using data in quarterly for the period after 1990 there are no factors that could cause instability in the parameters of the import function (income elasticity and price elasticity of imports) within the period, which indicates that the structural break widely associated with the year 1994 was not confirmed by this study

Algoritmos inteligentes para auto-correção, auto-verificação e auto-validação de medidas em sensores

This work presents a set of intelligent algorithms with the purpose of correcting calibration errors in sensors and reducting the periodicity of their calibrations. Such algorithms were designed using Artificial Neural Networks due to its great capacity of learning, adaptation and function approximation. Two approaches willbe shown, the firstone uses Multilayer Perceptron Networks to approximate the many shapes of the calibration curve of a sensor which discalibrates in different time points. This approach requires the knowledge of the sensor s functioning time, but this information is not always available. To overcome this need, another approach using Recurrent Neural Networks was proposed. The Recurrent Neural Networks have a great capacity of learning the dynamics of a system to which it was trained, so they can learn the dynamics of a sensor s discalibration. Knowingthe sensor s functioning time or its discalibration dynamics, it is possible to determine how much a sensor is discalibrated and correct its measured value, providing then, a more exact measurement. The algorithms proposed in this work can be implemented in a Foundation Fieldbus industrial network environment, which has a good capacity of device programming through its function blocks, making it possible to have them applied to the measurement process

Fuzzy angel: uma arquitetura distribuída de telemedicina para monitoramento de pacientes com esclerose lateral amiotrófica

The Amyotrophic Lateral Sclerosis (ALS) is a neurodegenerative disease characterized by progressive muscle weakness that leads the patient to death, usually due to respiratory complications. Thus, as the disease progresses the patient will require noninvasive ventilation (NIV) and constant monitoring. This paper presents a distributed architecture for homecare monitoring of nocturnal NIV in patients with ALS. The implementation of this architecture used single board computers and mobile devices placed in patient’s homes, to display alert messages for caregivers and a web server for remote monitoring by the healthcare staff. The architecture used a software based on fuzzy logic and computer vision to capture data from a mechanical ventilator screen and generate alert messages with instructions for caregivers. The monitoring was performed on 29 patients for 7 con-tinuous hours daily during 5 days generating a total of 126000 samples for each variable monitored at a sampling rate of one sample per second. The system was evaluated regarding the rate of hits for character recognition and its correction through an algorithm for the detection and correction of errors. Furthermore, a healthcare team evaluated regarding the time intervals at which the alert messages were generated and the correctness of such messages. Thus, the system showed an average hit rate of 98.72%, and in the worst case 98.39%. As for the message to be generated, the system also agreed 100% to the overall assessment, and there was disagreement in only 2 cases with one of the physician evaluators.

Fuzzy angel: uma arquitetura distribuída de telemedicina para monitoramento de pacientes com esclerose lateral amiotrófica

The Amyotrophic Lateral Sclerosis (ALS) is a neurodegenerative disease characterized by progressive muscle weakness that leads the patient to death, usually due to respiratory complications. Thus, as the disease progresses the patient will require noninvasive ventilation (NIV) and constant monitoring. This paper presents a distributed architecture for homecare monitoring of nocturnal NIV in patients with ALS. The implementation of this architecture used single board computers and mobile devices placed in patient’s homes, to display alert messages for caregivers and a web server for remote monitoring by the healthcare staff. The architecture used a software based on fuzzy logic and computer vision to capture data from a mechanical ventilator screen and generate alert messages with instructions for caregivers. The monitoring was performed on 29 patients for 7 con-tinuous hours daily during 5 days generating a total of 126000 samples for each variable monitored at a sampling rate of one sample per second. The system was evaluated regarding the rate of hits for character recognition and its correction through an algorithm for the detection and correction of errors. Furthermore, a healthcare team evaluated regarding the time intervals at which the alert messages were generated and the correctness of such messages. Thus, the system showed an average hit rate of 98.72%, and in the worst case 98.39%. As for the message to be generated, the system also agreed 100% to the overall assessment, and there was disagreement in only 2 cases with one of the physician evaluators.

As origens históricas do Zaratustra nietzcheano: o espelho de Zaratustra, a correção do mais fatal dos erros e a superação da morte de Deus

Through a careful examination of the relationship between Zoroastrianism and the Western tradition, and a detailed and critical reading of the writings of Nietzsche, this work aims at showing to what extent the character Zarathustra , his discourses and poetical-philosophical thoughts, and related passages from many distinct Nietzschean works, directly or undirectly reflect a philosophy that harvests contributions from the Zoroastrian tradition or its headways (in the Judeo-Greco-Christian tradition, and furthermore in the whole Western philosophical tradition). Supplied with this provisions, and with the interpretation cast upon them, Nietzschean philosophy questions the entire Western tradition of thought, and proposes its replacement by a new attitude towards life. This work also intends to show the way the Nietzschean Zarathustra was built up, in the writings of the German philosopher, together with the idea of making, out of the namesake character of the ancient Iranian prophet (Zarathushtra or Zoroaster, the founder of Zoroastrianism), the herald of that important text that intended to bring the German language to its highest perfection , clumping together, and leading to a prophetic-poetic climax consonant with the meaning of the Earth , Nietzsche s key ideas about the rectification of the most fatal of errors and about the death of God . An elaborate investigation has been pursued after the reasons and manners of the building up of Nietzsche s Zarathustra mirroring its Iranian namesake (sections 1.1 to 1.6), and a survey of the works of Nietzsche has suggested unquestionable relations with the Zoroastrian tradition, mostly through the Jewish, Greek or Christian repercussions of this tradition. These relations have been put in context, in many framings (sections 2.1 to 2.3.2), in the ambit of the most fatal of errors - the - creation of morals in the very occasion of its transposition to metaphysics (Ecce Homo, Why I am a destiny , 3). Through an evaluation of the possible circumstances and repercussions of the death of God , the relations between Nietzsche s writings and Zoroastrian tradition have been investigated (sections 3.1 to 3.7), allowing the understanding of this event as an essential component, and tragic outcome, of the rectification of the most fatal of errors

Máquina de vetores-suporte intervalar

The Support Vector Machines (SVM) has attracted increasing attention in machine learning area, particularly on classification and patterns recognition. However, in some cases it is not easy to determinate accurately the class which given pattern belongs. This thesis involves the construction of a intervalar pattern classifier using SVM in association with intervalar theory, in order to model the separation of a pattern set between distinct classes with precision, aiming to obtain an optimized separation capable to treat imprecisions contained in the initial data and generated during the computational processing. The SVM is a linear machine. In order to allow it to solve real-world problems (usually nonlinear problems), it is necessary to treat the pattern set, know as input set, transforming from nonlinear nature to linear problem. The kernel machines are responsible to do this mapping. To create the intervalar extension of SVM, both for linear and nonlinear problems, it was necessary define intervalar kernel and the Mercer s theorem (which caracterize a kernel function) to intervalar function

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Adição de poliuretana em pastas de cimento para poços de petróleo como agente de correção do filtrado

Chemical admixtures, when properly selected and quantified, play an important role in obtaining adequate slurry systems for quality primary cementing operations. They assure the proper operation of a well and reduce costs attributed to corrective cementing jobs. Controlling the amount lost by filtering through the slurry to permeable areas is one of the most important requirements in an operation, commonly controlled by chemical admixtures, such as carboxymethylcellulose (CMC). However, problems related to temperature, salttolerance and the secundary retarding effect are commonly reported in the literature. According to the scenario described above, the use of an aqueous dispersion of non-ionic poliurethane was proposed to control the filter loss, given its low ionic interaction with the free ions present in the slurries in humid state. Therefore, this study aims at assessing the efficiency of poliurethane to reduce filter loss in different temperature and pressure conditions as well as the synergistic effect with other admixtures. The temperatures and pressures used in laboratory tests simulate the same conditions of oil wells with depths of 500 to 1200 m. The poliurethane showed resistance to thermal degradation and stability in the presence of salts. With the increase in the concentration of the polymer there was a considerable decrease in the volume lost by filtration, and this has been effective even with the increase in temperature

Avaliação do potencial de formigas (Hymenoptera: formicidae) como vetores mecânicos de bactérias do gêneroSstaphylococcus no ambiente hospitalar.

In a hospital environment, these bacteria can be spread by insects such as ants, which are characterized by high adaptability to the urban environment. Staphylococcus is a leading cause of hospital infection. In Europe, Latin America, USA and Canada, the group of coagulase negative staphylococci (CoNS) is the second leading cause of these infections, according to SENTRY (antimicrobial surveillance program- EUA). In this study, we investigated the potential of ants (Hymenoptera: Formicidae) as vehicle mechanics of Staphylococcus bacteria in a public hospital, in Natal-RN. The ants were collected, day and night, from June 2007 to may 2008, in the following sectors: hospitals, laundry, kitchen, blood bank. The ants were identified according to the identification key of Bolton, 1997. For the analysis of staphylococci, the ants were incubated in broth Tryptic Soy Broth (TSB) for 24 hours at 35 º C and then incubated on Mannitol Salt Agar. The typical colonies of staphylococci incubated for 24 hours at 35 ° C in Tryptic Soy Agar for the characterization tests (Gram stain, catalase, susceptibility to bacitracin and free coagulase). The identification of CoNS was performed through biochemical tests: susceptibility to novobiocin, growth under anaerobic conditions, presence of urease, the ornithine decarboxylation and acid production from the sugars mannose, maltose, trehalose, mannitol and xylose. The antimicrobial susceptibility examined by disk-diffusion technique. The technique of Polymerase Chain Reaction was used to confirm the presence of mecA gene and the ability to produce biofilm was verified by testing in vitro using polystyrene inert surface, in samples of resistant staphylococci. Among 440 ants, 85 (19.1%) were carrying coagulase-negative staphylococci (CoNS) of the species Staphylococcus saprophyticus (17), Staphylococcus epidermidis (15), Staphylococcus xylosus (13), Staphylococcus hominis hominis (10), Staphylococcus lugdunensis (10), Staphylococcus warneri (6), Staphylococcus cohnii urealyticum (5), Staphylococcus haemolyticus (3), Staphylococcus simulans (3), Staphylococcus cohnii cohnii (2), and Staphylococcus capitis (1). No Staphylococcus aureus was found. Among the isolates, 30.58% showed resistance to erythromycin. Two samples of CoNS (2.35%), obtained from the ant Tapinoma melanocephalum collected in the post-surgical female ward, S. Hominis hominis and S. lugdunensis harbored the mecA gene and were resistant to multiple antibiotics, and the specie S. hominis hominis even showed to be a biofilm producer. This study proves that ants act as carriers of multidrug-resistant coagulase-negative Staphylococci and biofilm producers and points to the risk of the spreading of pathogenic microorganisms by this insect in the hospital environment

Atendimento Pré-hospitalar Móvel. Mapeando Riscos e Prevenindo Erros

The attention with safety of the patients is important in the quality of the nursing and health care. In the pre-hospital care, such care is essential on site with the purpose of avoiding possible consequences to the individual, ensuring a fast and appropriate care, with improvement of the morbidity and reduction of the mortality. This medical attention is equally associated with the significant risks of adverse events and serious mistakes, which can be reduced with the awareness of the professionals, organization and quality management. It is a descriptive, transversal research, of quantitative approach, with the objective of identifying the risks for the safety of the patient during the mobile pre-hospital care under the view of the nurses, in a city of the Brazilian Northeast. The sample was formed by 23 nurses. The inclusion criteria: to have at least two years of experience and accept to participate on the research. The data collection was done in two steps, first photo collection, through the adapted method of photographic analysis, and the second with the application of questionnaire, divide in two parts: socio-professional data and digital photo punctuation instrument of the patient s safety. The majority of the nurses had an average working time in the mobile pre-hospital care of six years and six months, in the age group of 38 to 53 years old (69,56%) and with Lato sensu specialization (73,91%), being (29,41%) emergency and (29,41%) in intensive care. The (74%) have the Advance Cardiac Life Support (ACLS) and (100%) have the Pre-Hospital Trauma Life Support (PHTLS); (91, 30%) know the thematic safety of the patient. On the pictures it was observed a bigger variability of the categories (risks) where 44% of variance emerged on the first picture of the research. The pictures 4 and 9 with the average below 5 were classified as very insecure, while pictures 7 and 3 with an average above 7, very secure. On the results of risks observed for the patient s safety in the mobile pre-hospital care five categories emerged: organization and packaging of the equipment and materials, routines and specificities in the mobile pre-hospital care, risks on the management of medications, for traumas and infections. Starting from the analysis of these risks, it was proposed ten steps for the safety in the mobile pre-hospital care: 1- Identify the patient; 2- Safety related to prevention of infection; 3- Safety in the management of medications; 4- Safety and standardization of the packaging of equipment and materials; 5- Attention to the specificities of the mobile pre-hospital care; 6- Incentive and value the participation of the patient and family; 7- Promote the communication with the central of regulation; 8- Prevention of traumas and falls; 9- Protect the skin from additional injuries; 10- Understand the benefit of all the equipment in the ambulance. The multiple risks and their emerged combinations on the research indicate a variety of actions to be developed and stimulated, like the use of steps for the patient s safety in the mobile pre-hospital care which contributes with the aid and management of risks, reduction of mistakes, disabilities and death

Qualidade do serviço em organização do terceiro setor: um estudo na casa de apoio à criança com câncer

The research aimed identify how the quality of services provided by Casa de Apoio à Criança com Câncer Durval Paiva is perceived by its users, giving an opportunity of improve their performance in social services provision pointing out the failures experienced, the institution will have the user as a important partner in fails identification, serving as a subsidy to the actions of correction and improvement to such situations demands. With this work implementation will be observed contributions that will permeate to the fields of theory and practice, enabling progress and enrichment on the subject. The theoretical contribution is observed as this work execution will provide greater advance about the models developed for the third sector. The proposed work will raise awareness issues about the full potential of the social economy, with regard to the quality of services provided by organizations, allowing a better definition of priorities on their development. The study addressed three issues: identifying the people that receive support of the Casa Durval Paiva, identifying what is the level of satisfaction of families served and evaluate the services provided by Casa Durval Paiva that demand improvements in the perception of families assisted. Found a demand for services has been found that the institution has a multidisciplinary team with a high level of professionalism, and supervised with students of various educational institutions and many volunteers to complement the actions of individual professionals. Was measured a high satisfaction of users of the services provided by Casa Durval Paiva

Software inteligente embarcado aplicado à correção de erro na medição de vazão em gás natural

This study developed software rotines, in a system made basically from a processor board producer of signs and supervisory, wich main function was correcting the information measured by a turbine gas meter. This correction is based on the use of an intelligent algorithm formed by an artificial neural net. The rotines were implemented in the habitat of the supervisory as well as in the habitat of the DSP and have three main itens: processing, communication and supervision

Uma fonte chaveada de 50kW com correção de fator de potência para alimentação de uma tocha de plasma Indutiva utilizando técnicas de controle digital

This work deals with the development of an experimental study on a power supply of high frequency that provides the toch plasmica to be implemented in PLASPETRO project, which consists of two static converters developed by using Insulated Gate Bipolar Transistor (IGBT). The drivers used to control these keys are triggered by Digital Signal Processor (DSP) through optical fibers to reduce problems with electromagnetic interference (EMI). The first stage consists of a pre-regulator in the form of an AC to DC converter with three-phase boost power factor correction which is the main theme of this work, while the second is the source of high frequency itself. A series-resonant inverter consists of four (4) cell inverters operating in a frequency around 115 kHz each one in soft switching mode, alternating itself to supply the load (plasma torch) an alternating current with a frequency of 450 kHz. The first stage has the function of providing the series-resonant inverter a DC voltage, with the value controlled from the power supply provided by the electrical system of the utility, and correct the power factor of the system as a whole. This level of DC bus voltage at the output of the first stage will be used to control the power transferred by the inverter to the load, and it may vary from 550 VDC to a maximum of 800 VDC. To control the voltage level of DC bus driver used a proportional integral (PI) controller and to achieve the unity power factor it was used two other proportional integral currents controllers. Computational simulations were performed to assist in sizing and forecasting performance. All the control and communications needed to stage supervisory were implemented on a DSP

Projeto em FPGA de um controlador unificado para correção de fator de potência em retificadores boost bidirecionais monofásicos

The use of Field Programmable Gate Array (FPGA) for development of digital control strategies for power electronics applications has aroused a growing interest of many researchers. This interest is due to the great advantages offered by FPGA, which include: lower design effort, high performance and highly flexible prototyping. This work proposes the development and implementation of an unified one-cycle controller for boost CFP rectifier based on FPGA. This controller can be applied to a total of twelve converters, six inverters and six rectifiers defined by four single phase VSI topologies and three voltage modulation types. The topologies considered in this work are: full-bridge, interleaved full-bridge, half-bridge and interleaved half-bridge. While modulations are classified in bipolar voltage modulation (BVM), unipolar voltage modulation (UVM) and clamped voltage modulation (CVM). The proposed project is developed and prototyped using tools Matlab/Simulink® together with the DSP Builder library provided by Altera®. The proposed controller was validated with simulation and experimental results

Questões objetivas sobre funções das provas de matemática do vestibular da UFRN dos anos de (2001 a 2008): um diagnóstico sobre os erros que os candidatos cometem

La dificultad que los alumnos encuentran en el aprendizaje de matemática viene siendo objeto de investigación por estudiosos en educación matemática, tanto en Brasil como en el exterior. El objetivo de este estudio consiste em investigar las dificuldades en el aprendizado sobre funciones matemáticas y la influencia de las concepciones alternativas a partir de los errores que los candidatos acerca de las cuestiones sobre funciones en la prueba objetiva de matemática del acceso a la universidad de los años de 2001 a 2008. Teniendo como cuestiones de estudio para alcanzar el objetivo propuesto: identificar la relevancia del tema funciones que son contemplados en las pruebas de acceso a la Universidad; asi como cuáles han sido los tipos de funciones más privilegiados y menos privilegiados; analizar si la contextualización de la pregunta y la presencia de elementos no textuales han influenciado en el aumento de tal dificultad; analizar si la representación semiótica agrega mayor exigencia a la pregunta; analizar respecto a la exigencia matemática de la pregunta; analizar lo que se refiere al desempeño de los candidatos para verificar cuál pregunta tuvo mejor desempeño y cuál el peor e identificar los errores más frecuentemente cometidos por los candidatos en esas pruebas. Las reflexiones de los estudiosos como: Radatz (1980), Cury (1994), Socas (1997), Borasi (1997), Franchi e Rincón (2004), Pochulu (2004) presentan las dificultades en el aprendizaje matemático, que aparecen a partir de los errores cometidos por los alumnos, quando estos errores reciben la influencia de las concepciones alternativas. El estudio que se presenta en esta disertación configura un análisis de los errores que los candidatos han cometido en las preguntas objetivas sobre el tema funciones de las pruebas de acceso a la Universidad de los años de 2001 a 2008, a partir de los relatorios de la Comissão Permanente do Vestibular COMPERVE/UFRN. Con la intención de alcanzar los objetivos propuestos para este estudio, fueran sido construidas categorías de análisis. Los resultados encontrados han sido: El tema funciones es el más frecuente entre los demás con (28,1%); el tipo de función priorizada durante esos años ha sido la función logarítmica con (24%); la contextualización de las preguntas exige una mayor comprensión por parte del candidato de lo que las situaciones directas; la caracterización semiótica posee elementos que estructuran esas preguntas que el educando debe saber asociar al texto; la exigencia matemática posibilitó analizar que el procedimiento medio ha sido el más requisitado; el desempeño de los candidatos ha sido en la mayoría bajo (50%); y los principales errores que ellos han cometido han sido de realizar traducciones incorrectas de las expresiones que aparecen en las situaciones-problema; utilizar todos los datos que aparezcan en el problema sin tomar en cuenta si el cálculo realizado responde a la pregunta solicitada; no interpretar coherentemente las informaciones del gráfico; decodificar incorrectamente los valores representados por literales en una recta numérica. Los resultados señalizan la necesidad de una revisión didáctico-metodológicas de la enseñanza de funciones a raíz de las cuales las dificultades en el aprendizaje se han presentado