16 resultados para Verbal tenses

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Verbal fluency is the ability to produce a satisfying sequence of spoken words during a given time interval. The core of verbal fluency lies in the capacity to manage the executive aspects of language. The standard scores of the semantic verbal fluency test are broadly used in the neuropsychological assessment of the elderly, and different analytical methods are likely to extract even more information from the data generated in this test. Graph theory, a mathematical approach to analyze relations between items, represents a promising tool to understand a variety of neuropsychological states. This study reports a graph analysis of data generated by the semantic verbal fluency test by cognitively healthy elderly (NC), patients with Mild Cognitive Impairment – subtypes amnestic(aMCI) and amnestic multiple domain (a+mdMCI) - and patients with Alzheimer’s disease (AD). Sequences of words were represented as a speech graph in which every word corresponded to a node and temporal links between words were represented by directed edges. To characterize the structure of the data we calculated 13 speech graph attributes (SGAs). The individuals were compared when divided in three (NC – MCI – AD) and four (NC – aMCI – a+mdMCI – AD) groups. When the three groups were compared, significant differences were found in the standard measure of correct words produced, and three SGA: diameter, average shortest path, and network density. SGA sorted the elderly groups with good specificity and sensitivity. When the four groups were compared, the groups differed significantly in network density, except between the two MCI subtypes and NC and aMCI. The diameter of the network and the average shortest path were significantly different between the NC and AD, and between aMCI and AD. SGA sorted the elderly in their groups with good specificity and sensitivity, performing better than the standard score of the task. These findings provide support for a new methodological frame to assess the strength of semantic memory through the verbal fluency task, with potential to amplify the predictive power of this test. Graph analysis is likely to become clinically relevant in neurology and psychiatry, and may be particularly useful for the differential diagnosis of the elderly.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study reflects on the conflicts that exist between the different forms of participation and the political representation manifested by community organizations and social movements in the city of Natal/RN. The objective is to better understand the process of political participation of the popular classes and how the different actors have represented collective demands in the struggle for rights. To this end, we mapped the organizations, social movements and participation spaces, through a type of participant research, in which we had the opportunity to experience and study different forms of collective action and events instigated by the community organizations and the Movement for the Struggle in the Neighborhoods, Villages and Slums (Movimento de Luta nos Bairros, Vilas e Favelas) MLB. From the theoretical contributions of authors such as Maria da Glória Gohn, Marco Aurélio Nogueira, Virginia Fontes, Vera da Silva Telles, Roberto Da Matta and Carlos Montaño, as well as the empirical data collected, the study revealed that on representing their segments and occupying different spaces of participation, some actors have formed partnerships with the State, putting collective demands on a second plane. Contrarily, other actors have articulated their struggle around collective demands and manifested through direct action, mobilizing and asserting themselves in defense of a project for society

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Based on North American Functional Linguistic Theory, our proposal is to describe and analyze the use of verb CHEGAR in verbal periphrasis such as [CHEGAR (E) + V2], where CHEGAR does not demonstrate a significance linked to physical movement. In linguistic literature, such periphrasis has been attributed several functions, related to aspectualization, emphasis of negative segments, and construction of mental spaces, among others. This study considers that the function of verb CHEGAR in the periphrasis in question is to indicate a global aspect, emphasizing a range of semantic-pragmatic nuances such as the sudden, instantaneous, or even abrupt character of the events refered to by the principal verb of the construction (V2), and/or the taking of initiative (sudden) by the agent (in the syntactic role of periphrastic subject), and/or subjective evaluations which go from surprise to frustration. Our objectives are the following: i) to describe and analyze the semanticpragmatic, morphosyntactic and social relationships which characterize the use of CHEGAR in verbal periphrases like [CHEGAR (E) + V2] and in coordinated/juxtaposed speech in which CHEGAR is the principal verb of the first utterance and is an elocution verb and the principal verb of the second; ii) identify, based on this description and analysis, synchrony proof in the grammaticalization of CHEGAR as an auxiliary verb in the periphrasis refered to. There was observed to be a strong similarity between coordinate/juxtaposed and periphrastic constructions. Such similarities strengthen the hypothesis that the use of CHEGAR as a lexical verb in coordinate/juxtaposed structures is the origin of the use of CHEGAR in the periphrastic structure, since the many properties encountered with higher frequency in lexical use are also just as frequently used as auxiliaries. Nevertheless, between the two constructions being studied, sufficient difference can be observed to see that CHEGAR, in the periphrasis [CHEGAR (E) V2], is behaving like an auxiliary verb, and shows typical properties of these types of verbs: i) in 100% of occurrences, it does not have a complement;ii) it has a co-referential subject in 100% of cases; iii) it does not appear with intervening material between it and V2. Besides this, CHEGAR, in periphrases, is predominant in nonneutral evaluation contexts, denoted by V2. Inspired by the results obtained, we propose strategies for the discussion of the [CHEGAR (E) V2] periphrases in both elementary and high schools.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Human cooperation is a hallmark of this species due to its wide extension to genetically unrelated individuals and complex division of labor. It is considered an evolutionary puzzle, because the theory of evolution by natural selection predicts that self-interested individuals tend to be selected. Different theories have been proposed to explain the evolution of cooperation, which the most important are kin selection and reciprocal altruism. Considering the evolutionary continuity between species, humans and other primates have several common traits that help to promote cooperation between individuals of these species. Two features, however, seem to be particularly humans: inequality aversion and preferences in relation to others. Although human cooperation is not necessarily related to morality, cooperative traits are the basis for moral tendencies. The development of human morality is a combination of early prosocial tendencies, cooperative skills displayed at different ages, social learning and cultural transmission of norms. The social stimulus seems to be particularly important in promoting cooperative behavior in children and adults. In order to study the influence of social stimuli, as verbal feedback, on children cooperation, a study was conducted with children in a public goods game. 407 children from public schools in Natal / RN, divided into 21 groups, between six and nine years, participated in eight rounds of this game. After each round, seven groups received praise for larger donations, seven groups have been criticized by smaller donations, and the other seven received no comment. Children cooperated more when criticized, without significant differences between sexes, although young children have cooperated more negative than older children. The results are likely related to the anticipation and avoidance of punishment associated with the feedback (although this did not occur), and greater sensitivity to the authority in younger children. Nevertheless, the cooperation decreased in all groups until the last day of play. The results suggest an early sensitivity to moral punishment, whose role in the maintenance of social relations must have been important in the evolution of cooperation in humans

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study presents new stress orientations and magnitudes from the Potiguar basin in the continental margin of Brazil. We analyzed breakout and drilled induced fractures derived from resistivity image logs run in ten oil wells. We also used direct Shmin measurements determined from hydraulic fractures and rock strength laboratory analysis. In addition, we compared these results with 19 earthquake focal mechanisms located in the crystalline basement. We observed that stress directions and magnitudes change across the basin and its basement. In the basin, the SHmax gradient of 20.0 MPa/km and the SHmax/Shmin ratio of 1.154 indicate a normal stress regime from 0.5 to 2.0 km, whereas the SHmax gradient of 24.5MPa/km and the SHmax/Shmin ratio of 1.396 indicate a strike slip stress regime from 2.5 to 4.0 km. The deeper strike-slip stress regime in the basin is similar to the regime in the basement at 1-12 km deep. This stress regime transition is consistent with an incipient tectonic inversion process in the basin. We also noted that the SHmax direction rotates from NW SE in the western part of the Potiguar basin to E W in its central and eastern part, following roughly the shoreline geometry. It indicates that local factors, as density contrast between continental and oceanic crust and sediment loading at the continental shelf influence the stress field. The concentration of fluid pressure in faults of the lowpermeability crystalline basement and its implications to establish a critically stressed fault regime in the basement is also discussed

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work consists of the conception, developing and implementation of a Computational Routine CAE which has algorithms suitable for the tension and deformation analysis. The system was integrated to an academic software named as OrtoCAD. The expansion algorithms for the interface CAE genereated by this work were developed in FORTRAN with the objective of increase the applications of two former works of PPGEM-UFRN: project and fabrication of a Electromechanincal reader and Software OrtoCAD. The software OrtoCAD is an interface that, orinally, includes the visualization of prothetic cartridges from the data obtained from a electromechanical reader (LEM). The LEM is basically a tridimensional scanner based on reverse engineering. First, the geometry of a residual limb (i.e., the remaining part of an amputee leg wherein the prothesis is fixed) is obtained from the data generated by LEM by the use of Reverse Engineering concepts. The proposed core FEA uses the Shell's Theory where a 2D surface is generated from a 3D piece form OrtoCAD. The shell's analysis program uses the well-known Finite Elements Method to describe the geometry and the behavior of the material. The program is based square-based Lagragean elements of nine nodes and displacement field of higher order to a better description of the tension field in the thickness. As a result, the new FEA routine provide excellent advantages by providing new features to OrtoCAD: independency of high cost commercial softwares; new routines were added to the OrtoCAD library for more realistic problems by using criteria of fault engineering of composites materials; enhanced the performance of the FEA analysis by using a specific grid element for a higher number of nodes; and finally, it has the advantage of open-source project and offering customized intrinsic versatility and wide possibilities of editing and/or optimization that may be necessary in the future

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Throughout our history as an actor, director and teacher, we appreciate comedic performances they proposed a dialogue with the public through the body language of the performers whose performances abdicate the use of speech of the actors. This way of representing, in the silence of the stage, caught our attention and sparked our curiosity about the subject, which is directly related to the poetic constructions of the body on the scene. Before initial readings on the subject, we begin to understand that for a long time in human history, especially in the West, understanding body was constructed from various epistemological looks disregarded the body as a unit, an incarnation of the subject in all . This kind of thinking, reflecting the philosophy of modernity, reverberated strongly about the aesthetic issues of art making, here specifically in Theatre. For several centuries the theatrical make up molded from various aesthetic elements, but ignoring the potential of embodiment of the artist, ie the theatrical text, for example, was considered for a long time, as the main element of the scene and gave little emphasis on dramaturgy elaborate body. With the emergence of reflections on the subject, brought especially from the early twentieth century, the perception of the body as a creative element and creator, also began to gain ground. Over time artistic practices began to glimpse the creative possibilities of the body, including rethinking its relationship with the text written with the spoken word. And as part of these new reflections on the body in the creation process, we proposed this research, we have entitled "A poetics of non-verbal body: a look at the comic on the scene." In our research on this subject, also seek to understand how the corporeality of the actor may give us clues to realize / build nonverbal body and comical scene. From this perspective we can analyze how could the construction of a comical and non-verbal dramaturgy from the phenomenology of laughter. And with that look, we want to point out some aspects and procedures, arising from reflections on corporeality and comedy, that constitute, among other possible, non-verbal construction methodology scenic.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work we have investigated some aspects of the two-dimensional flow of a viscous Newtonian fluid through a disordered porous medium modeled by a random fractal system similar to the Sierpinski carpet. This fractal is formed by obstacles of various sizes, whose distribution function follows a power law. They are randomly disposed in a rectangular channel. The velocity field and other details of fluid dynamics are obtained by solving numerically of the Navier-Stokes and continuity equations at the pore level, where occurs actually the flow of fluids in porous media. The results of numerical simulations allowed us to analyze the distribution of shear stresses developed in the solid-fluid interfaces, and find algebraic relations between the viscous forces or of friction with the geometric parameters of the model, including its fractal dimension. Based on the numerical results, we proposed scaling relations involving the relevant parameters of the phenomenon, allowing quantifying the fractions of these forces with respect to size classes of obstacles. Finally, it was also possible to make inferences about the fluctuations in the form of the distribution of viscous stresses developed on the surface of obstacles.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study was to apprehend the controversies that underlie the political organization of the category nowadays. The research established time frame as the decade from 2003 to 2013, more precisely the situation that opens with Lula's election to the Presidency and its repercussions for the Brazilian left, social movements and for the category. Through documentary research, we studied the professional aspects that are organized politically in different fields , notably the Federal Council of Social Service (CFESS) and the National Federation of Social Workers (FENAS). Seeking to understand their relationship with the Ethical - Political Project of the profession, public documents were analyzed expressing the political positions of these entities, placing the controversies and political differences between them and understanding the political organization as a means to building professionals and corporate projects many.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Verbal fluency is the ability to produce a satisfying sequence of spoken words during a given time interval. The core of verbal fluency lies in the capacity to manage the executive aspects of language. The standard scores of the semantic verbal fluency test are broadly used in the neuropsychological assessment of the elderly, and different analytical methods are likely to extract even more information from the data generated in this test. Graph theory, a mathematical approach to analyze relations between items, represents a promising tool to understand a variety of neuropsychological states. This study reports a graph analysis of data generated by the semantic verbal fluency test by cognitively healthy elderly (NC), patients with Mild Cognitive Impairment – subtypes amnestic(aMCI) and amnestic multiple domain (a+mdMCI) - and patients with Alzheimer’s disease (AD). Sequences of words were represented as a speech graph in which every word corresponded to a node and temporal links between words were represented by directed edges. To characterize the structure of the data we calculated 13 speech graph attributes (SGAs). The individuals were compared when divided in three (NC – MCI – AD) and four (NC – aMCI – a+mdMCI – AD) groups. When the three groups were compared, significant differences were found in the standard measure of correct words produced, and three SGA: diameter, average shortest path, and network density. SGA sorted the elderly groups with good specificity and sensitivity. When the four groups were compared, the groups differed significantly in network density, except between the two MCI subtypes and NC and aMCI. The diameter of the network and the average shortest path were significantly different between the NC and AD, and between aMCI and AD. SGA sorted the elderly in their groups with good specificity and sensitivity, performing better than the standard score of the task. These findings provide support for a new methodological frame to assess the strength of semantic memory through the verbal fluency task, with potential to amplify the predictive power of this test. Graph analysis is likely to become clinically relevant in neurology and psychiatry, and may be particularly useful for the differential diagnosis of the elderly.