Desenvolvimento de um sistema de planejamento, gestão de serviços e controle de custos em obras de construção civil

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Planejamento em saúde no Brasil: convergências e divergências entre instâncias de gestão

Trata-se de uma investigação que busca revelar convergências e divergências no processo de planificação da Política Pública de Saúde, com foco primordial na participação dos organismos de representação social na consolidação do Sistema Único (SUS), destacando a Conferência Nacional de Saúde CNS, instância que deve ter participação obrigatória na formulação de recomendações para essa política estatal. Considera que a planificação reúne elementos de concepção jurídica, técnica e política para a elaboração dos documentos intitulados Planos Nacionais de Saúde PNS. A partir de pesquisa qualitativa de base documental e argumentação com apoio de Cartografia Simbólica, põe em exame o processo de elaboração e o teor presente nos relatórios da 12ª (2003), 13ª (2007) e 14ª CNS (2011), alinhando seus eixos, diretrizes e prioridades nos correspondentes PNS nos quadriênios 2004-2007, 2008-2011 e 2012-2015. A escolha desses instrumentos, na temporalidade sugerida, tem por esteio o período em que a implantação do sistema de Planejamento do SUS PlanejaSUS, orienta normativa e tecnicamente a elaboração do PNS, tendo como uma de suas referências o que foi emanado das conferências. Propõe-se verificar as tensões existentes entre momentos distintos da definição das prioridades elencadas nas políticas públicas de saúde à luz das contribuições teóricas sobre a concepção do Estado, numa visão contemporânea associada à sua dinâmica de atuação vinculada ao modo de produção e acumulação capitalista; sobre a metodologia do Planejamento Estratégico com base na participação de atores diversos; e ainda, na análise sobre a expressão desse participacionismo na ótica dos processos democráticos representativos no SUS. Na confecção dos mapas cartográficos foi proposta a correlação entre os conteúdos dos Relatórios das 12ª a 14ª conferências de saúde com o que está expresso nas prioridades constantes nos Planos Nacionais de Saúde (2004 a 2007, 2008 a 2011 e 2012 a 2015), verificando-se aproximações e distanciamentos existentes entre o que expressa a sociedade e a política governamental. Conclui-se que, do exame crítico entre as diretrizes e prioridades contidas no acervo documental existente e sua metodologia de construção, com fundamento na argumentação do aporte teórico trabalhado, são verificadas tensões e harmonizações que revelam pontos convergentes e dissonantes das pactuações e consensos entre os atores sociais representantes dos segmentos, no qual critério da representatividade condiciona a defesa de opiniões, interesses e prioridades, de modo diverso para os que estão implicados nesse processo de planificação

Sistema mecatrônico de tempo real para monitoramento da qualidade da água embarcado em veleiro robótico autônomo

We propose a mechatronic system for monitoring water quality in rivers, lakes, dams and sea, able to perform the acquisition, processing and presentation of data via the web in real time, in order to facilitate analysis quickly and needs by interested communities. The hardware architecture and software monitoring system has been developed so that it can be generic, that is, supporting different applications. Nevertheless, as a validation of the proposed system, we built a prototype that operates embarked on an autonomous robotic sailboat, a responsible platform for collecting the data in multiple predefined points from a ground station with a planning system navigation. This final application combines the advantages of autonomy of a robotic sailboat with the need for fast and accurate monitoring of water quality, in addition to the use of an autonomous robotic sailboat unmanned facilitate the development of other research in this area.

O descompasso de uma experiência: avaliação do Programa Habitar Brasil na Comunidade África-Natal/RN

This research deals with the evaluation of the Programa do Governo Federal para Urbanização de Favelas Habitar Brasil(1993) carried out in the Africa slum - Redinha neighbourhood in Natal-Rn. This study carried out in period from 2005 to 2006 searches to identify the effects of the actions proposed by Program in 1993-1994 about the current urbanistic configuration of the Africa community. It analyzes the effectiveness in the process of achievement of the considered objectives to habitation, communitity equipments, infrastructure and agrarian regularization. On the evaluation process, it has been as reference the works developed by Adauto Cardoso (2004), Blaine Worthen (2004), Ronaldo Garcia (2001) and Rosângela Paz (2006). About the Habitational Policy with approach to the Urbanistic Right and the right to the housing, the reflections by Raquel Rolnik, Nabil Bonduki, Ermínia Maricato, Saule Júnior, Betânia de Moraes Alfonsin and Edésio Fernandes are main references. To gauge the execution of the objectives proposed by Habitar Brasil in 1993, it has searched in the documentary data of the time and in information gotten in interviews with technicians that had participated of the program, consistent references on what was considered, what was executed and the process of the intervention of Habitar Brasil in the Africa community. The area analysis in 2005-2006 has developed on the base of the urbanistic survey of the current situation from the four performance lines of the Program: habitation, infrastructure, community equipments and agrarian regularization, with a current urbanistic evaluation of Africa considering the intervention carried out in 1993 and 1994. The study points out the context of Brazilian Habitational Policy where the Programa Habitar Brasil was launched, explaining the main principles of the Program. In terms of local, it empahsizes the administrative-political factors that had contributed so that Natal-Rn city has been pioneering in the resources captation of Habitar Brazil (1993). Considering Habitar Brazil in Africa, the work argues and presents the intervention diagnosis and the proposal, developed by Program in 1993 evidencing the local problem of the time. After that, it makes a current reading of the area, identifying in 2006 representative elements of Habitar Brasil (1993-1994) for the Africa community. It identifies significant advances in the constitution of the institucional apparatus of the plaining system of Habitation of Social Interest for the city of Natal and points the fragilities in the implementation of the urban infrastructure actions and above all in the achievement of the objectives of the agrarian regularization

Geração de padrão de marcha adaptável para uma órtese ativa de membros inferiores

Atualmente com o crescente aumento de dispositivos robóticos destinados para aplicação na área de mobilidade de pessoas que sofreram algum tipo de lesão medular, se faz necessário desenvolver novas ferramentas para tornar tais equipamentos mais adaptáveis, seguros e autônomos. Para que as órteses robóticas que auxiliam na locomoção de pessoas paraplégicas possam desempenhar sua função, estas devem ser capazes de reproduzir os movimentos perdidos com o máximo de fidelidade e segurança em ambientes que eventualmente possam conter obstáculos de diferentes tipos como buracos, escadas e calçadas. As órteses robóticas para membros inferiores têm a capacidade de caminhar, subir e descer degraus, todavia, esses movimentos, na maioria das vezes, não se adaptam ao ambiente, sendo assim, para uma órtese robótica que foi projetada para subir um degrau com uma determinada altura ao se deparar com um degrau maior provavelmente não conseguirá realizar essa tarefa com a mesma segurança. Para solucionar esse e outros problemas, esse trabalho apresenta um Sistema de Auxílio à Locomoção (SAL) dotado de um planejador de passos e um gerador de referências angulares com características antropomórficas para a órtese robótica Ortholeg. O SAL utiliza dados antropométricos do usuário para gerar um padrão de marcha personalizado, dessa forma, a órtese em questão é capaz de adaptar o tamanho do passo para não colidir com obstáculos presentes no ambiente e transpor buracos com diversos tamanhos, subir e descer escadas e calçadas com diferentes valores de altura e comprimento. Para desenvolver o sistema de auxílio à locomoção foram adaptadas técnicas de planejamento de caminho, usadas a princípio em robôs bípedes. São apresentados vários experimentos que mostram a órtese Ortholeg realizando alguns movimentos com características antropomórficas para diferentes distâncias de caminhada e três tipos de obstáculos: degrau, buraco e calçada. A autonomia adquirida com a utilização do sistema de planejamento apresentado facilita a utilização de órteses robóticas como também garante uma maior segurança ao usuário.

O descompasso de uma experiência: avaliação do Programa Habitar Brasil na Comunidade África-Natal/RN

This research deals with the evaluation of the Programa do Governo Federal para Urbanização de Favelas Habitar Brasil(1993) carried out in the Africa slum - Redinha neighbourhood in Natal-Rn. This study carried out in period from 2005 to 2006 searches to identify the effects of the actions proposed by Program in 1993-1994 about the current urbanistic configuration of the Africa community. It analyzes the effectiveness in the process of achievement of the considered objectives to habitation, communitity equipments, infrastructure and agrarian regularization. On the evaluation process, it has been as reference the works developed by Adauto Cardoso (2004), Blaine Worthen (2004), Ronaldo Garcia (2001) and Rosângela Paz (2006). About the Habitational Policy with approach to the Urbanistic Right and the right to the housing, the reflections by Raquel Rolnik, Nabil Bonduki, Ermínia Maricato, Saule Júnior, Betânia de Moraes Alfonsin and Edésio Fernandes are main references. To gauge the execution of the objectives proposed by Habitar Brasil in 1993, it has searched in the documentary data of the time and in information gotten in interviews with technicians that had participated of the program, consistent references on what was considered, what was executed and the process of the intervention of Habitar Brasil in the Africa community. The area analysis in 2005-2006 has developed on the base of the urbanistic survey of the current situation from the four performance lines of the Program: habitation, infrastructure, community equipments and agrarian regularization, with a current urbanistic evaluation of Africa considering the intervention carried out in 1993 and 1994. The study points out the context of Brazilian Habitational Policy where the Programa Habitar Brasil was launched, explaining the main principles of the Program. In terms of local, it empahsizes the administrative-political factors that had contributed so that Natal-Rn city has been pioneering in the resources captation of Habitar Brazil (1993). Considering Habitar Brazil in Africa, the work argues and presents the intervention diagnosis and the proposal, developed by Program in 1993 evidencing the local problem of the time. After that, it makes a current reading of the area, identifying in 2006 representative elements of Habitar Brasil (1993-1994) for the Africa community. It identifies significant advances in the constitution of the institucional apparatus of the plaining system of Habitation of Social Interest for the city of Natal and points the fragilities in the implementation of the urban infrastructure actions and above all in the achievement of the objectives of the agrarian regularization

Desenvolvimento de microemulsões liofilizadas como um potencial sistema de liberação de fármacos usando planejamento experimental fatorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Comparação entre planejamento estatístico experimental e análise dimensional em operações de mistura e separação para sistema óleo-água

This work aims to determine a better methodology to help predicting some operational parameters to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The data from this research were obtained from the wastewater treatment unit, called MSPI-TU, installed on a wastewater treatment plant (WTP) of PETROBRAS/UO-RNCE. The importance in determining the better methodology to predict the results of separation and extraction efficiency of the equipment, contributes significantly to determine the optimum operating variables for the control of the unit. The study was based on a comparison among the experimental efficiency (E) obtained by operating MSPI-TU, the efficiency obtained by experimental design equation (Eplan) from the software Statistica Experimental Design® (version 7.0), and the other obtained from a modeling equation based on a dimensional analysis (Ecalc). The results shows that the experimental design equation gives a good prediction of the unit efficiencies with better data reliability, regarding to the condition before a run operation. The average deviation between the proposed by statistic planning model equation and experimental data was 0.13%. On the other hand, the efficiency calculated by the equation which represents the dimensional analysis, may result on important relative deviations (up 70%). Thus, the experimental design is confirmed as a reliable tool, with regard the experimental data processing of the MSPI-TU

A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos

SANTOS, Raimunda Fernanda dos; SILVA, Eliane Ferreira da. A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos.In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIÊNCIAS SOCIAIS APLICADAS,17.,2012,Natal/RN. Anais... Natal/RN: Centro de Ciências Sociais Aplicadas, 2012. Trabalho oral.

Processo de planejamento estratégico em universidade pública: o caso da Universidade Federal do Pará

The goal of this research is to check if the strategic planning developed between 2001 and 2009 into the State University of Para (Universidade Federal do Pará - UFPA) was consolidated into its Academic Centers as a management practice. To this end, we identified the planning formalization degree of the Academic Centers, the conceived tools for the planning, the conception and the methodological process used in the tools elaboration, as also its implementation. The research used a qualitative approach: it is descriptive and it uses the case study technique. The data were gathered from primary and secondary sources, through bibliography, documents, and field researches through semi-structure interviews. The analysis and data interpretation were done by each investigated Academic Center from the analytics categories guided by the specifics goals. We used theoretic fundamental based principles and the university as a study empiric reference based on its structure analysis, organizational processes and institutional strategic plan. We inspected how the strategic planning process was developed throughout the fixed period and how the investigated Academic Centers are from the collected documents and interviews. The theoretical foundation was built from three axis: the Brazilian undergraduate and posgraduate education system; the university itself including its singularity and complexity as an organization; and the planning as a strategic management process. The main results show us that the UFPA has updated regulatory milestones, presenting organizational structure, laws, instructions, manuals and deployed management model that give the strategic planning development conditions beyond its administration, i. e., into its Academic Centers. The centers also present those established milestones and develop the basic planning processes of the institution. Those processes are conceived based on the institutional strategic planning and the managers mainly use the procedural orientation defined by the university management, from where the conceptual foundation is originated and propagated. According to the literature and to the research done in this work, we can conclude that the Academic Centers from the UFPA developed the strategic planning practice. This planning is organized and founded and guided the plans and decisions which avoided the disordered management and, according to the managers, allowed the advances and performance improvement. We can conclude that the UFPA built an important foundation with respect to the management professionalization. On the other hand, we can not conclude that the management practice is consolidated since there are weaknesses into the structuring of the technical teams and there is not any management tool for the implementation of the elaborated plans

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

A implementação do programa Gestão nota 10 no sistema municipal de educação em Mossoró/RN (2005 a 2009)

This research work is focused to show the changes in educational administration from the agreements between the Mossoró / RN and the Ayrton Senna Institute IAS, for education provision. Nowadays, the partnership policy is a constitutive element of the reform of the Brazilian State, which dropped its action on social policies and to strengthen its regulatory role, encouraging private participation in planning, preparation and implementation of public policies, new printing setting the political-social. In this context, the 10 Note Management Programme, developed by the IAS, is part of the neoliberal logic of modernization of public school systems, focusing on results and developing strategies for control and regulation of schools work and its efficiency, effectiveness and greater productivity. The 10 Note focuses on two dimensions: the management of learning and teaching in networking, in a managerial perspective to overcome the culture of failure (expressed as age-grade, dropout and repetition rates in) and implantation of culture of success (as measured in the improvement of the indices). To understanding the process, we have delimited as the object of study, the process of implementing them mentioned program in the city, which its objective is to analyze implications for the school community from the perspective of democratic management, adopting the dimensions of autonomy and participation in institutional processes as a criterion of analysis. From a methodological point of view, the survey was conducted from a literature review and documentary about educational policy developed in the country since the 1990´s, seeking to understand, in a dialectical perspective, the political dimensions of teaching, training and performance of the subjects involved in the school work. Besides the empirical observation, it was also used semi-structured interviews with a methodological tool for gathering information and opinions about the partnership and the implementation of the 10 Note Management Program in the county. The interviewee participants were ex-former education managers, coordinators, school managers, secretaries and teachers. Regarding the dimensions inside the analysis (autonomy and participation), the research led to the conclusion: that GEED, under the guidance of IAS promoted regulation of school autonomy, set up the selection process for exercising the office of school administration and system awards to schools, pupils and teachers, subject to results, there is mismatch between the managerial logic and the democratic management principles, that the ideological discourse of modernization of municipal management coexists with traditional practices, centralizing patronage, which ignores the democratic participation in the school decisions processes, the goals of the partnership were partially achieved, since that the city has improved over the approval and dropouts, although the approval of the Education Municipal Plan of the rules institutional (administrative, financial and educational) and the creation of the Councils observed that the school community participation is still limited, not being characterized as a coordinated intervention, capable of promoting the transformation and improvement its quality in the county. In the same way, the orientation of networking is a limit to the autonomy of schools, given the external definition of goals and strategies to be adopted, along with pressure exerted through the accountability of each school community for their achievements

Diagnóstico para implantação do sistema de gestão ambiental em postos revendedores de combustíveis no município de Paranamirim RN: um estudo de caso

natural resources that still enjoy, in the certainty that if we do not, could culminate at the end of that remains. The environmental contamination by fuels in the retail service of oil and biofuels, has been a subject of growing research in Brazil, due to the large pollution potential of this activity. The aim of this study was to evaluate the importance of implementing the Environmental Management System (EMS) in fuel retail service stations in the city of Parnamirim-RN, but also describe the current situation the same as licensing and environmental characterization; identify existing barriers to implementation of EMS on the costs, technologies, knowledge, vision, present the potential benefits for the implementation of the EMS (social, economic and environmental), to identify the existence of plans for future action to implement the EMS , as a subsidy to promote the implementation of it. The methodology was developed through analysis of documents provided by the environmental agency responsible for licensing of retail service stations and fuel pala ANP. For data collection, we used the questionnaire was applied directly to managers or managers of sub-stations. Data were collected in 12 of 30 posts in the municipality. For purposes of data treatment was performed a descriptive analysis with respect to the opinion of twelve managers (respondents). The data acquired, according to the Likert scale were tabulated and analyzed using software SPSS 17.0 and Excel 2003, it was generated tables and graphs to observe the behavior of the data. The results showed that most respondents have a schooling level higher (58.3%) of the jobs surveyed 50% work on average 6 to 10 years and 41.6% are in operation for over 11 years , 75.0% do not have a license to operate and 12 stations, 58.3% were sued for not having a license to operate and are therefore in full commercial activity, 83% of jobs have some practice environmentally responsible, 75% agree in making planning future action to implement 8 the EMS in their ventures, 70% in full agreement that the high cost is a form of impediment to implementation of EMS; 66.67% agreed that resistance to change is an impediment to implementation of EMS; 90.91% agreed that the implementation of EMS is very complex, 80% of respondents agreed in a very significant environmental legislation is also a key factor preventing the implementation of EMS is noteworthy that 100% of respondents agreed that the knowledge about the use of the EMS will help to solve environmental problems in the fuel retail service stations, the implementation of the EMS will benefit with increased efficiency of resources applied to the findings by the agreement of 91.66% of respondents, where only 8, 33% disagreed, there was also a percentage of 100%, agreed that the company's image will be a great benefit, but also a contribution to solving environmental problems in the fuel retail service stations. Thus, the importance of the implementation of EMS in the fuel retail service stations in the city of Parnamirim-RN, with an urgent need to be deployed. And the bodies responsible for policy on state-run and supervise more tightly and action, this type of activity, in order to regulate the sustainable functioning of retail service stations of fuel, thus promoting a better quality of life for the population of the municipality of natal-RN

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity