Novo método para estimativa do gradiente de fratura para poços de petróleo

The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application

Gestão compartilhada de P&D em petróleo:a interação entre a Petrobrás e a Universidade Federal do Rio Grande do Norte

This work addresses the relationship between University-Firm aims to understand the model of shared management of R&D in petroleum of Petrobras with UFRN. This is a case study which sought to investigate whether the model of cooperation established by the two institutions brings innovation to generate technical-scientific knowledge and contribute to the coordination with other actors in the promotion of technological innovation. In addition to desk research the necessary data for analysis were obtained by sending questionnaires to the coordinators of projects in R&D at the company and university. Also, interviews were conducted with subjects who participated in the study since its inception to the present day. This case study were analysed through the Resource-Based View and Interorganizational Networks theory. The sample data also stands that: searches were aligned to the strategic planning and that 29% of R&D projects have been successful on the scope of the proposed objectives (of which 11% were incorporated into business processes); which was produced technical and scientific knowledge caracterized by hundreds of national and international publications; thesis, dissertations, eleven patents, and radical and incremental innovations; the partnership has also brought benefits to the academic processes induced by the improved infrastructure UFRN and changing the "attitude" of the university (currently with national prominence in research and staff training for the oil sector). As for the model, the technical point of view, although it has some problems, it follows that it is appropriate. From the viewpoint of the management model is criticized for containing an excess of bureaucracy. From the standpoint of strategic allocation of resources from the legal framework needs to be reassessed, because it is focused only on the college level and it is understood that should also reach the high school given the new reality of the oil sector in Brazil. For this it is desirable to add the local government to this partnership. The set of information leads to the conclusion that the model is identified and named as a innovation of organizational arrangement here known as Shared Management of R&D in petroleum of Petrobras with UFRN. It is said that the shared management model it is possible to exist, which is a simple and effective way to manage partnerships between firms and Science and Technology Institutions. It was created by contingencies arising from regulatory stand points and resource dependence. The partnership is the result of a process of Convergence, Construction and Evaluation supported by the tripod Simplicity, Systematization and Continuity, important factors for its consolidation. In practice an organizational arrangement was built to manage innovative university-industry partnership that is defined by a dyadic relationship on two levels (institutional and technical, therefore governance is hybrid), by measuring the quarterly meetings of systematic and standardized financial contribution proportional to the advancement of research. These details have led to the establishment of a point of interaction between the scientific and technological-business dimension, demystifying they are two worlds apart

Tratamento de fístulas enterocutâneas através de sistema a vácuo com alta pressão e dieta oral normal

Enterocutaneous fistulas are associated with prolonged hospital stay, high morbidity/mortality, and increase in hospital costs. This study aims to describe the use of a vacuum system and normal oral diet in dealing with this problem. Methods: Seventy-four consecutive patients with recent and defined external postoperative fistulas were analyzed. Abdominal imaging was used to exclude abscess and distal obstruction. The fistula tract was sealed with Foley catheter, connected to a negative pressure flask, changed daily for 5, 10 or 15 days, as necessary. Normal oral diet was permitted. Results: No patient died. Serum albumin and transferrin showed significantly higher levels at the end of treatment than at the beginning. The moderate and low-output fistulas had the best results (97% closed). Forty-eight (65%) fistulas closed after five days, 16(22%) after 10 days and 4(5%) after 15 days. Treatment failed in 6(8%) patients, who subsequently underwent surgery. Only one patient with low-output did not close her fistula. The cost of the treatment was US$ 41.75/day and it was considered cost effective. Conclusions: The vacuum system demonstrated good results in the treatment of fistulas. It included simplicity, low cost, short hospital stay, absence of skin breakdown, normal eating, good nutrition and activity patterns

Devido processo penal: uma análise acerca dos direitos fundamentais sob a perspectiva do processo eletrônico

The current study presents an analysis about the automation of the lawsuits in Brazil, which opens a new direction to be followed by the National Secretary of Justice, applied indistinctively to the civil, criminal and labor lawsuits, as well as to the special court houses at any degree of juridisdiction. It treats, specifically, about the transition from the classic lawsuit with bureaucratic aspects to the electronic one, based on the simplicity of the functions, the quality of the oral and the readiness. The light of the constitutional principle of the reasonable duration of the lawsuit, while fundamental rigth of the defendant and, under de protection of the democratic guarantee, it investigates, from the theory of the fundamental rights to the reform movement of the lawsiut, in the scenery of the alien law and national law, the latter, mostly because it has the automation as a necessary improvement claimed by modernity, yet without forgetting of the humane character inherent to the criminal lawsuit. It faces the issue of of the disruption of the paradigm of the written formality of the Brazilian lawsuit, the problem of the resistance to the new automized method, the use of the video conference for the inquest of the witnesses as well as for the questioning of the defendant, the advancements of the virtual lawsuit on the Superior Courts, Federal Supreme Court and Superior Court of Justice, it treats also about the role of the National Council of Justice - CNJ - to uniformize the legal proceedings in the country. Without neglecting the effective respect to the fundamental rights, it focuses the cultural change necessary so that the electronic technology can be, in fact, in the indictment system, the means to reach with excellency the citizenship by the simplification of the legal proceedings, transposing the baseless bureaucracy and assuring an effective judicial service assistance in order to have a better quality of life

Mala na mão, pé na estrada: à procura de uma pedagogia das singularidades

We make many journeys during our lifetime. In each of them we accumulate experiences that result in an amount of knowledge that constitutes our history. The dissertation presents one of these journeys: that one I took along with students of Pedagogia da Terra project from Universidade do Estado do Rio Grande do Norte UERN to think about the knowledge within their memories in their way from countryside to city seeking for education. I used as main references to this task the ideas of Edgar Morin about Method as Strategy, implication of the subject in knowledge, pertinent knowledge, and knowledge reconnection. And from Paulo Freire I used the concepts of cultural identity assumption and dialog. I built as resource of method the metaphor of the suitcase, called by me the trunk of memory treasures . The use of this cognitive operator makes possible for those students bring their memories to the surface and share them collectively, by the process I name as auto-social- biographical narratives. The explicitness of the memories they choose to reveal by means of these narratives permitted me to understand the metamorphosis of these knowledge since their childhood to nowadays. In order to present an archeology of knowledge within these life histories I chose a narrative writing style concerned with simplicity and lightness, where I use the description of facts and discussions occurred during this journey. My main arguments in systematizing this experience are: scientific production can and should be grounded on knowledge diversity and on a more sensible approach to phenomena; education and pedagogy need to take as starting point and fuel for their practices the singularities of the subjects, their life history, educational background and knowledge resulting from both. Teacher s formation programs which students have mixed, rural and urban, background should value cognitive experiences built in the interaction with that knowledge closer of a sensible logic, deeper grounded in land and nature. Doing so, education can contribute to join diverse knowledge against monocutural forms of thinking and educational practices

Validação de conteúdo do instrumento para consulta de enfermagem na visita domiciliar às pessoas com lesão medular: um enfoque no autocuidado

This study aimed to validate the contents of an Instrument for Nursing Consultation in the Home Visit of people with Spinal Cord Injury (INCEVDOP-LM), based on the Self-Care Deficit Theory. The methodological development study was conducted with spinal cord injured (SCI) people ascribed in the Family Health Units the city of Natal/RN/Brazil, and with the nurses of these institutions. The study was conducted from Januray 2012 to January 2013 in two phases: the first aimed to identify the need for self-care of persons with SCI, and the second to develop and validate the INCEVDOP-LM. The first phase consisted of a census study of people with SCI living in Natal/RN. In the second phase, a non-probabilistic convencience sample of subjects was selected to form two groups: First stage - Group 1 of the first stage was comprised by 73 adults with SCI diagnosed with paraplegia or tetraplegia, with cognitive function preserved and that were registered to some family health unit; Group 2 of the Second phase was composed of six experts that were nurses with doctoral formation, scientific experience in the area of technology development or assistance to persons with SCI, and with publications in periodicals Qualis A2. Data collection of the first phase was conducted through home visits of people with SCI that responded three instruments: Questionnaire I (comprised of demographic and socioeconomic variables), The Competency Rating Scale for Self-care (ASA) and the Barthel Index (an instrument for evaluation of functional capacity). The research for the second phase was conducted in two stages: I-construction of the INCEVDOP LM; II-validation of the INCEVDOP-LM. The instrument and an evaluation form were forwarded to the experts for the validation. The correlations between the responses were analyzed by the Kappa test, with accepting values of>0.75. The evaluation criteria were: organization, clarity, simplicity, readability, appropriateness of vocabulary, objectivity, accuracy, reliability and suitability and the positive responses with frequency values of≥90% were considered excellent. The chi-square test was used to investigate the differences between proportions. The study attended to the principles of Human Rights CNS Resolution 196/96. Results were reported by means of four articles derived from the study. The findings indicate that the items that showed disagreement among experts (k=0.02) were diagnoses, interventions and evaluation of the nursing features pertaining to the domains of Nutrition, Hygiene, Elimination, Physical, Social and Psychological, and of the Ability to perform work activities feature. Agreement among the experts were reported for the other items, with kappa ranging from 0.72 to 1. After removing items with disagreement, all criteria achieved excellent rates and no significant differences were observed between the proportions of responses of evaluation of experts (p>0.05). We conclude that the instrument shows validity to serve as a guide for nurses to conduct a systematic consultation during the home visit to people with spinal cord injury, with emphasis on self-care. The instrument must go through other levels of validation when applied in the clinical setting

Modelagem de decisão na seleção de equipamento: um estudo usando o processo analítico hierárquico na contratação de sondas de perfuração de poços de petróleo

The main goal of this dissertation is to develop a Multi Criteria Decision Aid Model to be used in Oils and Gas perforation rigs contracts choices. The developed model should permit the utilization of multiples criterions, covering problems that exist with models that mainly use the price of the contracts as its decision criterion. The AHP has been chosen because its large utilization, not only academic, but in many other areas, its simplicity of use and flexibility, and also fill all the requirements necessary to complete the task. The development of the model was conducted by interviews and surveys with one specialist in this specific area, who also acts as the main actor on the decision process. The final model consists in six criterions: Costs, mobility, automation, technical support, how fast the service could be concluded and availability to start the operations. Three rigs were chosen as possible solutions for the problem. The results reached by the utilizations of the model suggests that the utilization of AHP as a decision support system in this kind of situation is possible, allowing a simplifications of the problem, and also it s a useful tool to improve every one involved on the process s knowledge about the problem subject, and its possible solutions

Fatores que afetam a satisfação de pacientes em serviços de saúde :um estudo em setor ambulatorial de hospital

This thesis shows concepts and models related to customer satisfaction measurement, focusing in detail on patients satisfaction evaluations in a policlinic sector of a hospital located in Natal RN. To reach this aim, two hundred and fifty one patients of this hospital were interviewed. The methodology approach includes a theoretical basis through a review and study of previous research on the topic, governmental initiatives and management systems which deal with excellence and need more reports concerning customers perceptions about satisfaction. Furthermore, it was included some models of nationals index about customer satisfaction. The Norwegian model was used in this thesis. The use of this approache, together with a multiple regression analysis, led to results that shows the factors which affect patients satisfaction in a policlinic sector. They are four as following: The evaluation of physician attendance; its results; simplicity of accessibility when health services are needed; and both support and tranquility given by the hospital. The study results can support researches of a conceptual model to determinate the aspects which affect the patient s satisfaction and could be a contribution to a development of a national costumer satisfaction index

Sistema inteligente para diagnóstico de patologias na laringe utilizando máquinas de vetor de suporte

The human voice is an important communication tool and any disorder of the voice can have profound implications for social and professional life of an individual. Techniques of digital signal processing have been used by acoustic analysis of vocal disorders caused by pathologies in the larynx, due to its simplicity and noninvasive nature. This work deals with the acoustic analysis of voice signals affected by pathologies in the larynx, specifically, edema, and nodules on the vocal folds. The purpose of this work is to develop a classification system of voices to help pre-diagnosis of pathologies in the larynx, as well as monitoring pharmacological treatments and after surgery. Linear Prediction Coefficients (LPC), Mel Frequency cepstral coefficients (MFCC) and the coefficients obtained through the Wavelet Packet Transform (WPT) are applied to extract relevant characteristics of the voice signal. For the classification task is used the Support Vector Machine (SVM), which aims to build optimal hyperplanes that maximize the margin of separation between the classes involved. The hyperplane generated is determined by the support vectors, which are subsets of points in these classes. According to the database used in this work, the results showed a good performance, with a hit rate of 98.46% for classification of normal and pathological voices in general, and 98.75% in the classification of diseases together: edema and nodules

Um algoritmo para estimação de estado em alimentadores de distribuição de energia elétrica com base no método da soma de potências

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed

Um estudo de estruturas com PBG e fotônica

One of the objectives of this work is the ana1ysis of planar structures using the PBG (photonic Bandgap), a new method of controlling propagation of electromagnetic waves in devices with dielectrics. Here the basic theory of these structures will be presented, as well as applications and determination of certain parameters. In this work the analysis will be performed concerning PBG structures, including the basic theory and applications in planar structures. Considerations are made related to the implementation of devices. Here the TTL (Transverse Transmission Line) method is employed, characterized by the simplicity in the treatment of the equations that govern the propagation of electromagnetic waves in the structure. In this method, the fields in x and z are expressed in function of the fields in the traverse direction y in FTD (Fourier Transform Domain). This method is useful in the determination of the complex propagation constant with application in high frequency and photonics. In this work structures will be approached in micrometric scale operating in frequencies in the range of T erahertz, a first step for operation in the visible spectra. The mathematical basis are approached for the determination of the electromagnetic fields in the structure, based on the method L TT taking into account the dimensions approached in this work. Calculations for the determination of the constant of complex propagation are also carried out. The computational implementation is presented for high frequencies. at the first time the analysis is done with base in open microstrip lines with semiconductor substrate. Finally, considerations are made regarding applications ofthese devices in the area of telecommunications, and suggestions for future

Sensores e interfaces com aplicações em motor mancal

Relevant researches have been growing on electric machine without mancal or bearing and that is generally named bearingless motor or specifically, mancal motor. In this paper it is made an introductory presentation about bearingless motor and its peripherical devices with focus on the design and implementation of sensors and interfaces needed to control rotor radial positioning and rotation of the machine. The signals from the machine are conditioned in analogic inputs of DSP TMS320F2812 and used in the control program. This work has a purpose to elaborate and build a system with sensors and interfaces suitable to the input and output of DSP TMS320F2812 to control a mancal motor, bearing in mind the modularity, simplicity of circuits, low number of power used, good noise imunity and good response frequency over 10 kHz. The system is tested at a modified ordinary induction motor of 3,7 kVA to be used with a bearingless motor with divided coil

Aplicação de técnicas de aprendizado de máquina no reconhecimento de classes estruturais de proteínas

Nowadays, classifying proteins in structural classes, which concerns the inference of patterns in their 3D conformation, is one of the most important open problems in Molecular Biology. The main reason for this is that the function of a protein is intrinsically related to its spatial conformation. However, such conformations are very difficult to be obtained experimentally in laboratory. Thus, this problem has drawn the attention of many researchers in Bioinformatics. Considering the great difference between the number of protein sequences already known and the number of three-dimensional structures determined experimentally, the demand of automated techniques for structural classification of proteins is very high. In this context, computational tools, especially Machine Learning (ML) techniques, have become essential to deal with this problem. In this work, ML techniques are used in the recognition of protein structural classes: Decision Trees, k-Nearest Neighbor, Naive Bayes, Support Vector Machine and Neural Networks. These methods have been chosen because they represent different paradigms of learning and have been widely used in the Bioinfornmatics literature. Aiming to obtain an improvment in the performance of these techniques (individual classifiers), homogeneous (Bagging and Boosting) and heterogeneous (Voting, Stacking and StackingC) multiclassification systems are used. Moreover, since the protein database used in this work presents the problem of imbalanced classes, artificial techniques for class balance (Undersampling Random, Tomek Links, CNN, NCL and OSS) are used to minimize such a problem. In order to evaluate the ML methods, a cross-validation procedure is applied, where the accuracy of the classifiers is measured using the mean of classification error rate, on independent test sets. These means are compared, two by two, by the hypothesis test aiming to evaluate if there is, statistically, a significant difference between them. With respect to the results obtained with the individual classifiers, Support Vector Machine presented the best accuracy. In terms of the multi-classification systems (homogeneous and heterogeneous), they showed, in general, a superior or similar performance when compared to the one achieved by the individual classifiers used - especially Boosting with Decision Tree and the StackingC with Linear Regression as meta classifier. The Voting method, despite of its simplicity, has shown to be adequate for solving the problem presented in this work. The techniques for class balance, on the other hand, have not produced a significant improvement in the global classification error. Nevertheless, the use of such techniques did improve the classification error for the minority class. In this context, the NCL technique has shown to be more appropriated

Controle de posição com restrição à orientação de um Veículo Aéreo Não-Tripulado tipo Quadrirrotor

Quadrotors aircraft are composed by four propellers mounted on four engines on a cross or x disposition, and, in this structure, the engines on the same arm spin in the same direction and the other arm in the opposite direction. By rotating each helix generates vertical upward thrust. The control is done by varying the rotational speed of each motor. Among the advantages of this type of vehicle can cite the mechanical simplicity of construction, the high degree of maneuverability and the ability to have vertical takeoffs and landings. The modeling and control of quadrirrotores have been a challenge due to problems such as nonlinearity and coupling between variables. Several strategies have been developed to control this type of vehicle, from the classical control to modern. There are air surveillance applications where a camera is fixed on the vehicle to point forward, where it is desired that the quadrotor moves at a fixed altitude toward the target also pointing forward, which imposes an artificial constraint motion, because it is not desired that it moves laterally, but only forwards or backwards and around its axes . This restriction is similar to the naturally existing on robots powered by wheels with differential drive, which also can not move laterally, due to the friction of the wheels. Therefore, a position control strategy similar to that used in this type of robot could be adapted for aerial robots like quadrotor. This dissertation presents and discusses some strategies for the control of position and orientation of quadrotors found in the literature and proposes a strategy based on dynamic control of mobile robots with differential drive, called the variable reference control. The validity of the proposed strategy is demonstrated through computer simulations

Análise da eficiência de aquecedor solar espiral com e sem efeito estufa para piscinas

The technical and economic viability of solar heating for swimming pools is unquestionable, besides there it replaces the high costs and environmental impacts of conventional supply of energy, and it improves an optimization in the pool heating uses. This work applies the principles of the greenhouse effect: advanced thermodynamics, heat retention and equalization of temperature, to optimize the solar heating equipment, reducing the area required by collectors as much as 40% (still estimated value) for commercial collectors, with minor architectural and aesthetic impacts on the environment. It features a solar heating alternative in pools, whose main characteristics: low cost, simplicity in manufacturing and assembly and a faster heating. The system consists of two collectors spiral hoses made of polyethylene with a hundred meters each, and working on a forced flow, with only one pass of the working fluid inside the coils, and is used to pump itself treatment of pool water to obtain the desired flow. One of the collectors will be exposed to direct solar radiation, and the other will be covered by a glass slide and closed laterally, so providing the greenhouse effect. The equipment will be installed in parallel and simultaneously exposed to the sun in order to obtain comparative data on their effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.