Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação

CARDOSO, M. F. ; RAMOS, A. S. M. . Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação. Revista Espaço Acadêmico (UEM) , JCR, v. 10, p. 150-158, 2010.

Desenvolvimento de coleções de fontes de informação eletrônica em bibliotecas universárias

O contexto hodierno caracteriza-se como um panorama de uso contínuo de informação nas mais variadas esferas da sociedade. A informação é usada em diversos contextos sob vários formatos e isso se torna possível com a evolução tecnológica realizada em ritmo acelerado, sobretudo nos últimos dois séculos. Essa evolução trouxe consigo a possibilidade ampliada de acesso à informação, mas por outro lado, impôs desafios circunstanciais no seu tratamento e difusão. Nos diversos tipos de unidades de informação, faz-se necessária a adoção de estratégias para a melhoria do gerenciamento e desenvolvimento das coleções, sobretudo as coleções digitais. De tal modo, o trabalho visa a traçar um panorama ligado às questões relacionadas à comunicação cientifica com a bibliotecas universitárias, com vistas a ampliar o debate sobre o desenvolvimento digital de coleções de periódicos em bibliotecas universitárias, bem como aspectos relacionados à adoção de critérios de seleção e avaliação destes itens de informação. Aborda os casos específicos, como o do Portal Capes e o SciELO como coleções digitais de periódicos sujeitos a estratégias de desenvolvimento das coleções. Aponta opções para a melhoria da gestão da coleção digital em bibliotecas universitárias. A metodologia empregada foi a de pesquisa bibliográfica em uso de fontes eletrônicas e convencionais, bem como análise de critérios utilizados na Avaliação e Coleções para Bibliotecas Universitárias e o Indicadores Qualis pela Condenação de Aperfeiçoamento de Pessoa de Ensino Superior (CAPES).

Os impactos tecnológicos da implantação da nota fiscal eletrônica: um estudo de casos múltiplos

Increasingly, the Information Technology is used in the society, including the private, public and third sector organizational context. Technological tools are created in order to speed, automate, control and monitor processes. These technologies generate impacts on areas that permeate their use and the objective of this study is to investigate the implementation process of the Eletronic Invoice and the impacts arising from this technological tool in companies. For that, case studies have been conducted in three companies that emit and receive Eletronic Invoice, in a Information System consultancy, that provides softwares of Eletronic Invoice, and in a State Tax Department. Data collection was performed with organizations representatives through electronic questionnaires. The study concludes that it is expected, by the investigated organizations, that the tool reaches the benefits offered by the Tax Administration. However, these benefits have not been identified yet and neither have the use of methodologies in order to identify them. Moreover, the main impact found was the need for better training and participant´s technical qualification, followed by reducing printing costs and paper purchase

Vigilância eletrônica no trabalho bancário: do controle consentido ao totalitarismo corporativo

This dissertation addresses the electronic surveillance theme in the banking context. The research that originated it, which was held in an organization called for the fiction name Banco Total, started from the following driving question: How do workers at a bank perceive electronic surveillance at their process of work? The research s main objective was to comprehend how workers perceive electronic surveillance at their process of work. The study adopted an interdisciplinary perspective, having Management as the original field, establishing a dialogue with others disciplines, like Philosophy and Sociology. About its methodology, it s a qualitative research that addressed its object in oral (interviews with live history elements) way. . Ten individuals were interviewed. The analytical process utilized the hermeneutical-dialectics technique.. From the analyses (hermeneutics) of the data, the following themes have emerged: (i) Acquiescence ; (ii) Monitoring; (iii) Time and Motion; (iv) Fear; (v) Interdiction; and (vi) Resistance . From the discussion (dialectic) of the results, this work presents three synthetic propositions that culminate in the following dimensions (i) control; (ii) acquiescence; (iii) corporative totalitarianism. It can be concluded that electronic surveillance is one mechanism of control emerged from the apply of technology at Total Bank; that information technology has been improving the control mechanisms of management theories; and that the imbrications between management and material technology control mechanisms at a context where there is acquiescence by workers contribute for the emergency of corporative totalitarianism components

Modelagem molecular na caracterização eletrônica de oligopeptídeos e na descrição quântica da interação fármaco-receptor

In this dissertation, the theoretical principles governing the molecular modeling were applied for electronic characterization of oligopeptide α3 and its variants (5Q, 7Q)-α3, as well as in the quantum description of the interaction of the aminoglycoside hygromycin B and the 30S subunit of bacterial ribosome. In the first study, the linear and neutral dipeptides which make up the mentioned oligopeptides were modeled and then optimized for a structure of lower potential energy and appropriate dihedral angles. In this case, three subsequent geometric optimization processes, based on classical Newtonian theory, the semi-empirical and density functional theory (DFT), explore the energy landscape of each dipeptide during the search of ideal minimum energy structures. Finally, great conformers were described about its electrostatic potential, ionization energy (amino acids), and frontier molecular orbitals and hopping term. From the hopping terms described in this study, it was possible in subsequent studies to characterize the charge transport propertie of these peptides models. It envisioned a new biosensor technology capable of diagnosing amyloid diseases, related to an accumulation of misshapen proteins, based on the conductivity displayed by proteins of the patient. In a second step of this dissertation, a study carried out by quantum molecular modeling of the interaction energy of an antibiotic ribosomal aminoglicosídico on your receiver. It is known that the hygromycin B (hygB) is an aminoglycoside antibiotic that affects ribosomal translocation by direct interaction with the small subunit of the bacterial ribosome (30S), specifically with nucleotides in helix 44 of the 16S ribosomal RNA (16S rRNA). Due to strong electrostatic character of this connection, it was proposed an energetic investigation of the binding mechanism of this complex using different values of dielectric constants (ε = 0, 4, 10, 20 and 40), which have been widely used to study the electrostatic properties of biomolecules. For this, increasing radii centered on the hygB centroid were measured from the 30S-hygB crystal structure (1HNZ.pdb), and only the individual interaction energy of each enclosed nucleotide was determined for quantum calculations using molecular fractionation with conjugate caps (MFCC) strategy. It was noticed that the dielectric constants underestimated the energies of individual interactions, allowing the convergence state is achieved quickly. But only for ε = 40, the total binding energy of drug-receptor interaction is stabilized at r = 18A, which provided an appropriate binding pocket because it encompassed the main residues that interact more strongly with the hygB - C1403, C1404, G1405, A1493, G1494, U1495, U1498 and C1496. Thus, the dielectric constant ≈ 40 is ideal for the treatment of systems with many electrical charges. By comparing the individual binding energies of 16S rRNA nucleotides with the experimental tests that determine the minimum inhibitory concentration (MIC) of hygB, it is believed that those residues with high binding values generated bacterial resistance to the drug when mutated. With the same reasoning, since those with low interaction energy do not influence effectively the affinity of the hygB in its binding site, there is no loss of effectiveness if they were replaced.

Hemiparesia congênita e adquirida na criança: interrelação entre presença de crises epilépticas, os achados eletrencefalográficos e de neuroimagem por ressonância nuclear magnética

The purpose of this paper was to study patients with congenital and acquired hemiparesis, their clinical aspects, the presence or not of epileptic seizures, and electroencephalographic (EEG) and Magnetic Resonance Imaging (MRI) findings. We analyzed the interrelation between etiology, the presence and seriousness of epileptic seizures (ES) and the possible causes of refractoriness. This is a prospective study using the clinical diagnosis of a child neurologist, who attested to the presence of unilateral motor lesions. We compared the electroencephalographic findings in patients with or without epileptic seizures, and investigated if among the former, these seizures were controlled or not, their likely etiology and risks of refractoriness. EEG background activity on the lesion and contralateral side was analyzed, in addition to the presence of concomitant epileptiform activity. Encephalon MRIs of all the patients were studied to correlate etiology and the control or not of epileptic seizures. The disorganization of bilateral EEG activity correlated with the difficult-to-control epileptic seizures. Suitably organized background activity contralateral to the lesion is a good prognosis in relation to epileptic seizures. Focal epileptogenic activity does not necessarily predispose to epileptic manifestation. The MRI is more important in determining etiology than in prognosing epileptic seizures. This study used a multidisciplinary approach involving child neurologists, a physical therapist and a neuroradiologist. This meets the criteria of multidisciplinarity of the Postgraduate Program in Health Sciences

Medidas de parâmetros morfológicos e funcionais do Coração em brasileiros: um subestudo do primeiro registro multicêntricos latino-americano em ressonância magnética cardiáca

There is no data about cardiac measurements em Brazilians obtained by CMR. This a muldisciplinary study with the objective of obtaining measurements of the left ventricle (LV) and right ventricle (RV) diastolic diameter (Dd), systolic diameter (Ds), diastolic volume (Dv), systolic volume (Sv), ejection fraction (EF) and myocardial mass in Brazilians. One hundred and seven (54 men and 53 women, mean age of 43.4 ± 13.1 years) asymptomatic individuals without heart disease were submitted to cardiac magnetic resonance (cMR) studies using steady state free precession technique. The means and standard deviations of the parameters of the LV and RV were respectively: LVDD = 4,8 ± 0,5 cm; LVSD = 3,0±0,6 cm; LVDV = 128,4±29,6 ml; LVSV = 45,2±16,6 ml; LVEF = 65,5±6,3%; LV mass = 95,2±30,8.1 g; RVDD = 3,9±1,3 cm; RVSD = 2,5±0,5 cm; RVDV = 126,5±30,7 ml; RVSV = 53.6±18,4 ml; RVEF = 58.3±8,0.0% and RV mass = 26,1±6,1 g. The masses and volumes were significantly higher in men, except for the LVSV. The RV EF was significantly higher in women. There was inverse correlation between RV systolic volume and with age, being more significant in men. This study describes for the first time benchmarks for cardiac measurements obtained by CMR among asymptomatic Brazilians individuals without heart disease and demonstrated differences according to sex and age

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

Caracterização de estruturas planares com substratos Iso/Anisotrópicos truncados através da técnica da ressonância transversa modificada

This work presents a theoretical and numerical analysis using the transverse resonance technique (TRT) and a proposed MTRT applied in the analysis of the dispersive characteristics of microstrip lines built on truncated isotropic and anisotropic dielectric substrates. The TRT uses the transmission lines model in the transversal section of the structure, allowing to analyze its dispersive behavior. The difference between TRT and MTRT consists basically of the resonance direction. While in the TRT the resonance is calculated in the same direction of the metallic strip normal axis, the MTRT considers the resonance in the metallic strip parallel plane. Although the application of the MTRT results in a more complex equivalent circuit, its use allows some added characterization, like longitudinal section electric mode (LSE) and longitudinal section magnetic mode (LSM), microstrips with truncated substrate, or structures with different dielectric regions. A computer program using TRT and MTRT proposed in this work is implemented for the characterization of microstrips on truncated isotropic and anisotropic substrates. In this analysis, propagating and evanescent modes are considered. Thus, it is possible to characterize both the dominant and higher order modes of the structure. Numerical results are presented for the effective permittivity, characteristic impedance and relative phase velocity for microstrip lines with different parameters and dimensions of the dielectric substrate. Agreement with the results obtained in the literature are shown, as well as experimental results. In some cases, the convergence analysis is also performed by considering the limiting conditions, like particular cases of isotropic materials or structures with dielectric of infinite size found in the literature. The numerical convergence of the formulation is also analyzed. Finally, conclusions and suggestions for the continuity of this work are presented

Análise dos Modos Ressonantes em Antenas de Microfita sobre Substratos Iso/Anisotrópicos por Técnicas da Ressonância Transversa

Neste trabalho, são utilizadas a Técnica da Ressonância Transversa (TRT) e a Técnica da Ressonância Transversa Modificada (MTRT), para a determinação das freqüências dos modos ressonantes de antenas de microfita com patch quadrado, retangular e circular e com substratos isotrópicos e anisotrópicos. Para isso, é proposto um modelo da cavidade equivalente, onde a antena tipo patch retangular é representada como sendo a superposição de duas linhas infinitas em microfita, uma de largura W, representando a dimensão que expressa a largura do patch, e a outra com largura L, representando a dimensão que expressa o comprimento do patch. A avaliação da eficiência e aplicabilidade dos métodos citados é realizada comparando-se com resultados experimentais e obtidos através de outras técnicas. Três situações serão verificadas: estruturas com substrato infinito, estrutura com substrato tipo pedestal e estruturas com substrato truncado além dos limites da fita metálica. Os resultados obtidos demonstram que as técnicas de análise de onda completa utilizadas neste trabalho, por um formalismo matemático mais rigoroso, são eficientes e precisas tanto na aplicação em estruturas com substrato isotrópico como nas que possuem substrato anisotrópico. Inicialmente são consideradas apenas as estruturas com substratos isotrópicos, com diferentes constantes dielétricas, e é avaliada a influência da largura do substrato sobre as freqüências dos modos ressonantes das antenas. Posteriormente, a análise do truncamento do dielétrico é realizada para estruturas com substrato anisotrópico. Em todos os casos, os resultados experimentais, obtidos a partir da construção de protótipos, são confrontados com os obtidos a partir de simulação, utilizando as técnicas TRT e MTRT. No final, as técnicas descritas são utilizadas para antenas tipo patch circular, sendo utilizada uma técnica de equivalência para transformar a antena circular em outra quadrada ou retangular equivalente, dependendo do modo que se queira encontrar. Os resultados obtidos são então analisados, observando-se uma boa concordância e indicando a viabilidade do método. Após isso, são apresentadas as conclusões e sugeridos alguns temas para a continuidade deste trabalho

Proposta de um sistema de segurança eletrônica predial

This work presents a suggestion of a security system of land automation having as objective main the creation of a system capable from easy method, supervise the installations of a building with the goal to preserver security personal and patrimonial necessities, aim at portability low cost and use easiness. Was designed an alarms central and access controller that has digital and analogical inputs for sensors and outputs for buzzer, telephonic dialing and electronic lock. The system is supervised by software that makes solicitations of information to the alarms central through the one computer's serial port (RS-232). The supervisory software was developed in platform LabVIEW with displays the received data on a graphical interface informing the sensors' current states distributed in the building and system events as alarns occurrences. This system also can be viewed through the Internet for people registered by the land security's system administrator

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

Filmes nanométricos de FeN e ALN crescidos por sputtering e aplicações do efeito peltier

This study will show the capability of the reactive/nonreactive sputtering (dc/rf) technique at low power for the growth of nanometric thin films from magnetic materials (FeN) and widegap semiconductors (AlN), as well as the technological application of the Peltier effect using commercial modules of bismuth telluride (Bi2Te3). Of great technological interest to the high-density magnetic recording industry, the FeN system represents one of the most important magnetic achievements; however, diversity of the phases formed makes it difficult to control its magnetic properties during production of devices. We investigated the variation in these properties using ferromagnetic resonance, MOKE and atomic force microscopy (AFM), as a function of nitrogen concentration in the reactive gas mixture. Aluminum nitride, a component of widegap semiconductors and of considerable interest to the electronic and optoelectronic industry, was grown on nanometric thin film for the first time, with good structural quality by non-reactive rf sputtering of a pure AlN target at low power (≈ 50W). Another finding in this study is that a long deposition time for this material may lead to film contamination by materials adsorbed into deposition chamber walls. Energy-dispersive X-ray (EDX) analysis shows that the presence of magnetic contaminants from previous depositions results in grown AlN semiconductor films exhibiting magnetoresistance with high resistivity. The Peltier effect applied to commercially available compact refrigeration cells, which are efficient for cooling small volumes, was used to manufacture a technologically innovative refrigerated mini wine cooler, for which a patent was duly registered

Efeito Kerr magneto-óptico; Ressonância ferromagnética; Acoplamento bilinear; Acoplamento biquadrático

In this work, we investigated the magnetic properties of a monocrystalline Fe thin film and of Fe(80 Å)/Cr(t)/Fe(80 Å) tri-layers, with the nonmagnetic metallic Cr spacer layer thickness varying between 9 Å < t < 40 Å. The samples were deposited by the DC Sputtering on Magnesium Oxide (MgO) substrates, with (100) crystal orientation. For this investigation, experimental magneto-optical Kerr effect (MOKE) magnetometry and ferromagnetic resonance (FMR) techniques were employeed. In this case, these techniques allowed us to study the static and dynamical magnetization properties of our tri-layers. The experimental results were interpreted based on the phenomenological model that takes into account the relevant energy terms to the magnetic free energy to describe the system behavior. In the case of the monocrystalline Fe film, we performed an analytical discussion on the magnetization curves and developed a numerical simulation based on the Stoner-Wohlfarth model, that enables the numerical adjustment of the experimental magnetization curves and obtainment of the anisotropy field values. On the other hand, for the tri-layers, we analyzed the existence of bilinear and biquadratic couplings between the magnetizations of adjacent ferromagnetic layers from measurements of magnetization curves. With the FMR fields and line width angular dependencies, information on the anisotropy in three layers was obtained and the effects of different magnetic relaxation mechanisms were evidenced. It was also possible to observe the dependence of the epitaxy of the multilayers with growth and sputtering parameters. Additionally it was developed the technique of AC magnetic susceptibility in order to obtain further information during the investigation of magnetic thin films

Alterações da default mode network provocadas pela ingestão de Ayahuasca investigadas por Ressonância Magnética Funcional

Ayahuasca is psychotropic beverage that has been used for ages by indigenous populations in South America, notably in the Amazon region, for religious and medicinal purposes. The tea is obtained by the decoction of leaves from the Psychotria viridis with the bark and stalk of a shrub, the Banisteriopsis caapi. The first is rich in N-N-dimethyltryptamine (DMT), which has an important and well-known hallucinogenic effect due to its agonistic action in serotonin receptors, specifically 5-HT2A. On the other hand, β-carbolines present in B. caapi, particularly harmine and harmaline, are potent monoamine oxidase inhibitors (MAOi). In addition, the tetrahydroharmine (THH), also present in B. caapi, acts as mild selective serotonin reuptake inhibitor and a weak MAOi. This unique composition induces a number of affective, sensitive, perceptual and cognitive changes in individuals under the effect of Ayahuasca. On the other hand, there is growing interest in the Default Mode Network (DMN), which has been consistently observed in functional neuroimaging studies. The key components of this network include structures in the brain midline, as the anterior medial frontal cortex, ventral medial frontal cortex, posterior cingulate cortex, precuneus, and some regions within the inferior parietal lobe and middle temporal gyrus. It has been argued that DMN participate in tasks involving self-judgments, autobiographical memory retrieval, mental simulations, thinking in perspective, meditative states, and others. In general, these tasks require an internal focus of attention, hence the conclusion that the DMN is associated with introspective mental activity. Therefore, this study aimed to evaluate by functional magnetic resonance imaging (fMRI) changes in DMN caused via the ingestion of Ayahuasca by 10 healthy subjects while submitted to two fMRI protocols: a verbal fluency task and a resting state acquisition. In general, it was observed that Ayahuasca causes a reduction in the fMRI signal in central nodes of DMN, such as the anterior cingulate cortex, the medial prefrontal cortex, the posterior cingulate cortex, precuneus and inferior parietal lobe. Furthermore, changes in connectivity patterns of the DMN were observed, especially a decrease in the functional connectivity of the precuneus. Together, these findings indicate an association between the altered state of consciousness experienced by individuals under the effect of Ayahuasca, and changes in the stream of spontaneous thoughts leading to an increased introspective mental activity