58 resultados para Regiões de Interesse

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

There has been an increasing tendency on the use of selective image compression, since several applications make use of digital images and the loss of information in certain regions is not allowed in some cases. However, there are applications in which these images are captured and stored automatically making it impossible to the user to select the regions of interest to be compressed in a lossless manner. A possible solution for this matter would be the automatic selection of these regions, a very difficult problem to solve in general cases. Nevertheless, it is possible to use intelligent techniques to detect these regions in specific cases. This work proposes a selective color image compression method in which regions of interest, previously chosen, are compressed in a lossless manner. This method uses the wavelet transform to decorrelate the pixels of the image, competitive neural network to make a vectorial quantization, mathematical morphology, and Huffman adaptive coding. There are two options for automatic detection in addition to the manual one: a method of texture segmentation, in which the highest frequency texture is selected to be the region of interest, and a new face detection method where the region of the face will be lossless compressed. The results show that both can be successfully used with the compression method, giving the map of the region of interest as an input

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Mirror therapy (MT) is being used as a rehabilitation tool in various diseases, including stroke. Although some studies have shown its effectiveness, little is known about neural mechanisms that underlie the rehabilitation process. Therefore, this study aimed at assessing cortical neuromodulation after a single MT intervention in ischemic stroke survivors, by means of by functional Magnetic Resonance Imaging (fMRI) and Transcranial Magnetic Stimulation (TMS). Fifteen patients participated in a single thirty minutes MT session. fMRI data was analyzed bilaterally in the following Regions of Interest (ROI): Supplementary Motor Area (SMA), Premotor cortex (PMC), Primary Motor cortex (M1), Primary Sensory cortex (S1) and Cerebellum. In each ROI, changes in the percentage of occupation and beta values were computed. Group fMRI data showed a significant decreased in the percentage of occupation in PMC and cerebellum, contralateral to the affected hand (p <0.05). Significant increase in beta values was observed in the following contralateral motor areas: SMA, Cerebellum, PMC and M1 (p<0,005). Moreover, a significant decrease was observed in the following ipsilateral motor areas: PMC and M1 (p <0,001). In S1 a bilateral significant decrease (p<0.0005) was observed.TMS consisted of the analysis of Motor Evoked Potential (MEP) of M1 hotspot. A significant increase in the amplitude of the MEP was observed after therapy in the group (p<0,0001) and individually in 4 patients (p <0.05). Altogether, our results imply that single MT intervention is already capable of promoting changes in neurobiological markers toward patterns observed in healthy subjects. Furthermore, the contralateral hemisphere motor areas changes are opposite to the ones in the ipsilateral side, suggesting an increase system homeostasis.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The protozoan parasite Toxoplasma gondii transforms the innate aversion of rats for cat urine into a fatal attraction, that increases the likelihood of the parasite completing its life cycle in the cat s intestine. The neural circuits implicated in innate fear, anxiety, and learned fear all overlap considerably, raising the possibility, that T. gondii may disrupt all of these nonspecifically. In this study, we evaluated immunoreactivity for tyrosine hydroxylase (TH) in areas associated with innate fear of infected male swiss mice. The latent Toxoplasma infection converted the aversion of mice to feline odors into attraction. This loss of fear is remarkably specific, as demonstrated by Vyas et al (2007), because infection did not diminish learned fear, anxiety-like behavior, olfaction, or nonaversive learning. However, the neurochemical mechanism related to alterations in innate fear due to T. gondii infection remains poorly studied. 20 mice were inoculated with bradyzoites (25 cysts) from a Toxoplasma gondii (Me-49 strain). The brains were removed after 60 days, sectioned and processed for TH immunohistochemistry. The correlation between the amount of cysts per area and the densitometric analysis of neurotransmitter reactivity was low in the areas implicated in innate fear of infected animals, when comparated with noninfected controls

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Leather tanneries generate effluents with high content of heavy metals, especially chromium, which is used in the mineral tanning process. Microemulsions have been studied in the extraction of heavy metals from aqueous solutions. Considering the problems related with the sediment resulting from the tanning process, due to its high content in chromium, in this work this sediment was characterized and microemulsion systems were applied for chromium removal. The extraction process consists in the removal of heavy metal ions present in an aqueous feeding solution (acid digestion solution) by a microemulsion system. First three different solid sludge digestion methods were evaluated, being chosen the method with higher digestion capacity. For this digestion method, seeking its optimization, was evaluated the influence of granule size, temperature and digestion time. Experimental results showed that the method proposed by USEPA (Method A) was the most efficient one, being obtained 95.77% of sample digestion. Regarding to the evaluated parameters, the best results were achieved at 95°C, 14 Mesh granule size, and 60 minutes digestion time. For chromium removal, three microemulsion extraction methods were evaluated: Method 1, in a Winsor II region, using as aqueous phase the acid digestion solution; Method 2, in a Winsor IV region, being obtained by the addition of the acid digestion solution to a microemulsion phase, whose aqueous phase is distilled water, until the formation of Winsor II system; and Method 3, in a Winsor III region, consisting in the formation of a Winsor III region using as aqueous phase the acid digestion solution, diluted in NaOH 0.01N. Seeking to optimize the extraction process only Method 1 (Systems I, II, and VIII) and Method 2 (System IX) were evaluated, being chosen points inside the interest regions (studied domains) to study the influence of contact time and pH in the extraction percentiles. The studied systems present the following compositions: System I: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase 2% NaCl solution; System II: Aqueous phase Acid digestion solution with pH adjusted using KOH (pH 3.5); System VIII: Aqueous phase - Acid digestion solution (pH 0.06); and System IX Aqueous phase Distilled water (pH 10.24), the other phases of Systems II, VIII and IX are similar to System I. Method 2 showed to be the more efficient one regarding chromium extraction percentile (up to 96.59% - pH 3.5). Considering that with Method 2 the microemulsion region only appears in the Winsor II region, it was studied Method 3 (System X) for the evaluation and characterization of a triphasic system, seeking to compare with a biphases system. System X is composed by: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase Acid digestion solution diluted with water and with its pH adjusted using 0.01N NaOH solution. The biphasic and triphasic microemulsion systems were analyzed regarding its viscosity, extraction efficiency and drop effective diameter. The experimental results showed that for viscosity studies the obtained values were low for all studied systems, the diameter of the drop is smaller in the Winsor II region, with 15.5 nm, reaching 46.0 nm in Winsor III region, being this difference attributed to variations in system compositions and micelle geometry. In chromium extraction, these points showed similar results, being achieved 99.76% for Winsor II system and 99.62% for Winsor III system. Winsor III system showed to be more efficient due to the obtaining of a icroemulsion with smaller volume, with the possibility to recover the oil phase in excess, and the use of a smaller proportion of surfactant and cosurfactant (C/S)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The microorganisms play very important roles in maintaining ecosystems, which explains the enormous interest in understanding the relationship between these organisms as well as between them and the environment. It is estimated that the total number of prokaryotic cells on Earth is between 4 and 6 x 1030, constituting an enormous biological and genetic pool to be explored. Although currently only 1% of all this wealth can be cultivated by standard laboratory techniques, metagenomic tools allow access to the genomic potential of environmental samples in a independent culture manner, and in combination with third generation sequencing technologies, the samples coverage become even greater. Soils, in particular, are the major reservoirs of this diversity, and many important environments around us, as the Brazilian biomes Caatinga and Atlantic Forest, are poorly studied. Thus, the genetic material from environmental soil samples of Caatinga and Atlantic Forest biomes were extracted by direct techniques, pyrosequenced, and the sequences generated were analyzed by bioinformatics programs (MEGAN MG-RAST and WEBCarma). Taxonomic comparative profiles of the samples showed that the phyla Proteobacteria, Actinobacteria, Acidobacteria and Planctomycetes were the most representative. In addition, fungi of the phylum Ascomycota were identified predominantly in the soil sample from the Atlantic Forest. Metabolic profiles showed that despite the existence of environmental differences, sequences from both samples were similarly placed in the various functional subsystems, indicating no specific habitat functions. This work, a pioneer in taxonomic and metabolic comparative analysis of soil samples from Brazilian biomes, contributes to the knowledge of these complex environmental systems, so far little explored

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The accelerated pressure of use and occupation of Rio Grande do Norte coastline in the last two decades presented the tourism as its main vector, having as a consequence a strong, articulated and growing real estate speculation of this area. In the Natal County there is a Zona Especial de Interesse Turistico II (Special Zone of Tourism Interest II) (ZET-II), consisted of urban beaches with approximately 8.5 km that is an important seashore of the city. The purpose of this research was identification, characterization and assessment of the process of use and occupation of dunes fields emphasizing the role of ZET-II, whereas the specific goals was the analysis of weather, geology and geomorphology, characterization of use and occupation of soil, and elaboration of an environmental diagnosis with identification and description of its mains consequences. The result of this work was the delineation of geologic-geomorphological map of the area with identification of principals units, determining its use and occupation, the measurement of the area already occupied by equipments, besides the description of the environmental impacts on dune fields: devastation, coastline erosion, ocean pollution by sewer and pluvial waters, contamination of groundwater, distribution inadequate of solid residues, landscape degradation, and occupation of seashore through the privatization of public areas. Concluding that the degrading changes occurred in this areas are resulting from the nature of use and urban seashore regulations, which have been diminishing the natural aspect, altering the landscape definitely, compromising the quality of hydro resources and altering its use, privatizing the areas between tides, complicating the population access and obstructing the scenery visualization of dunes and ocean. There is an urgent necessity of improvement of public politics in order to improve the strategies and organization of use and occupation of space urban-coastline

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The detection of emerging interest microcontaminants in environmental samples of surface water, groundwater, drinking water, wastewater and effluents from water and sewage treatment plants (WTP and STP), in many countries, suggests these pollutants are widespread in the environment, mainly in urban areas. This is a reason for great concern, since many of these compounds are potentially harmful for humans other living beings, and they are not efficiently removed in the majority of WTP and STP, which is exacerbated by precariousness of water supply and sanitation services. In Natal, like other Brazilian cities, the sewage system serves only part of the urban area (about 30%), so that the rest of the wastewater is infiltrated in the sandy soil of the region in cesspool-dry well systems. This has resulted in contamination of groundwater in the area (sand-dune barrier aquifer, which supplies more than 50% of the city population), which has been observed by the increase in nitrate concentration in supply wells. The vulnerability of the sanddune barrier aquifer, combined with reports of the presence of emerging interest microcontaminants in Brazil and worldwide, led to this research, which investigated the occurrence of fifteen microcontaminants in Natal groundwater and sewage. Samples were collected at five wells used for water supply, the raw sewage and the effluents from biological reactors from STP (UASB and activated sludge reactors). Two samples of each sample were taken, with one week apart between the samples. To determine the contaminants, extraction of aquifer water, and raw and treated sewage samples were performed, through the technique of using SPE Strata X cartridge (Phenomenex®) to the aquifer water, and Strata SAX and Strata X (Phenomenex® ) for samples of raw and treated sewage. Subsequently the extracts were analyzed using GC-MS technique. Much of the analyzed microcontaminants were detected in groundwater and sewage. The concentrations in groundwater are generally lower than those found in the sewers. Some of the compounds (estrone, estradiol, bisphenol A, caffeine, diclofenac, naproxen, paracetamol and ibuprofen) are partially removed at STP.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The Rachycentron canadum species, commonly known as beijupirá or cobia is the only representative of Rachycentridae family which has been increasingly used in marine fish farming, in intensive cultivation. As advantageous features it has easy adaptation, prolific behavior, early growth in captivity and high commercial value. Additionally, specie of Lutjanidae family (Lutjanus synagris, Lutjanus jocu, Lutjanus analis, Lutjanus alexandrei and Ocyurus chrysurus) represents an important fisheries resource in all areas of its occurrence. In Brazil, the commercial exploitation of Lutjanidae which begun in the 60's and 80's, already has showed a decline in catch volumes. This fact suggests that the snappers must have a conservative management. Despite the economic potential, little is known about the genetic and cytogenetic characteristics of these species, especially with respect to repetitive DNA analysis, which represents the major part of the eukaryotes genome, playing important evolutionary roles in the fish genome. Cytogenetic data is increasingly being used in population studies and biotechnological purposes in fishes. The cytogenetical analyzes were performed using classical methods such as Giemsa staining, C-banding and Ag-NORs, fluorochromes base-specific staining (DAPI and MM) and physical mapping of repetitive sequences among which, telomeric sequences, transposons (Tol2), retrotransposons (Rex1 and Rex3), repetitive DNA (microsatellites and Cot-1) and transcriptionally active regions of the 18S and 5S ribosomal genes and histone (H3 and H2BA) by in situ hybridization with fluorescent probes (FISH). The chromosomal patterns obtained contributed to the organization of repetitive sequences in the genome of the species, as well as karyotypical differentiation. Unusual patterns of histone sequences expansion depict the first occurrence in marine fishes. The obtained data provided subsides to the genetic knowledge of the important fisheries resource represented by the species here analyzed, seeking the marine pisciculture improvement.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The SBBrasil 2010 Project (SBB10) was designed as a nationwide oral health epidemiological survey within a health surveillance strategy. This article discusses methodological aspects of the SBB10 Project that can potentially help expand and develop knowledge in the health field. This was a nationwide survey with stratified multi-stage cluster sampling. The sample domains were 27 State capitals and 150 rural municipalities (counties) from the country's five major geographic regions. The sampling units were census tracts and households for the State capitals and municipalities, census tracts, and households for the rural areas. Thirty census tracts were selected in the State capitals and 30 municipalities in the countryside. The precision considered the demographic domains grouped by density of the overall population and the internal variability of oral health indices. The study evaluated dental caries, periodontal disease, malocclusion, fluorosis, tooth loss, and dental trauma in five age groups (5, 12, 15-19, 35-44, and 65-74 years).

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The SBBrasil 2010 Project (SBB10) was designed as a nationwide oral health epidemiological survey within a health surveillance strategy. This article discusses methodological aspects of the SBB10 Project that can potentially help expand and develop knowledge in the health field. This was a nationwide survey with stratified multi-stage cluster sampling. The sample domains were 27 State capitals and 150 rural municipalities (counties) from the country's five major geographic regions. The sampling units were census tracts and households for the State capitals and municipalities, census tracts, and households for the rural areas. Thirty census tracts were selected in the State capitals and 30 municipalities in the countryside. The precision considered the demographic domains grouped by density of the overall population and the internal variability of oral health indices. The study evaluated dental caries, periodontal disease, malocclusion, fluorosis, tooth loss, and dental trauma in five age groups (5, 12, 15-19, 35-44, and 65-74 years).

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Recomendações projetuais baseadas no clima são fontes importantes de diretrizes para os arquitetos. Uma das formas de obtenção dessas recomendações é por meio de normas, como a NBR 15220 (ABNT, 2005), que agrupa as cidades em zonas homogêneas quanto as estratégias sugeridas. O zoneamento bioclimático brasileiro divide o território do Rio Grande do Norte em duas zonas, a ZB 7 e ZB 8, que possuem algumas recomendações distintas, como aberturas grandes e vedações leves para a região litorânea contra aberturas pequenas e vedações pesadas para a região semiárida. Entretanto, outras configurações climáticas estão presentes no RN e não possuem clara recomendação. Este é o caso das regiões serranas e das regiões intermediárias entre o litoral e a região semiárida. Em virtude disso, este estudo visa encontrar recomendações bioclimáticas para habitações de interesse social nessas quatro condições climáticas. Para tanto, utilizou-se ferramenta computacional para realização de simulações das condições térmicas de três tipos de habitações populares - alongada, ramificada e compacta - e das seguintes estratégias: presença ou ausência de ventilação natural e sombreamento, massa térmica leve ou pesada, e Fator de Calor Solar alto ou baixo. Essas simulações foram realizadas para quatro condições climáticas do estado. Foram analisados os desempenhos de cada caso para identificar as estratégias e tipos de habitação recomendados para cada clima. De maneira geral, nos climas deNatal, Mossoró e Caicó viu-se que habitações com FCS baixo e com presença de ventilação natural possuem os melhores desempenhos. No clima de Areia, a ausência de ventilação aliada ao baixo FCS é que produziu os melhores desempenhos. O sombreamento melhora o desempenho nas cidades de clima quente, mas aumenta as horas com desconforto ao frio em Areia. A massa térmica varia de acordo com as demais estratégias, tendo casos em que habitações com massa térmica alta possuem melhores desempenhos que outros casos com massa térmica baixa. Por fim, viu-se que as estratégias para Natal, Caicó e Mossoró são bem semelhantes, com a recomendação de ventilação natural, FCS baixo nas vedações e sombreamento. Para Areia, a recomendação é não ventilar, ter FCS baixo e massa térmica alta.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Recomendações projetuais baseadas no clima são fontes importantes de diretrizes para os arquitetos. Uma das formas de obtenção dessas recomendações é por meio de normas, como a NBR 15220 (ABNT, 2005), que agrupa as cidades em zonas homogêneas quanto as estratégias sugeridas. O zoneamento bioclimático brasileiro divide o território do Rio Grande do Norte em duas zonas, a ZB 7 e ZB 8, que possuem algumas recomendações distintas, como aberturas grandes e vedações leves para a região litorânea contra aberturas pequenas e vedações pesadas para a região semiárida. Entretanto, outras configurações climáticas estão presentes no RN e não possuem clara recomendação. Este é o caso das regiões serranas e das regiões intermediárias entre o litoral e a região semiárida. Em virtude disso, este estudo visa encontrar recomendações bioclimáticas para habitações de interesse social nessas quatro condições climáticas. Para tanto, utilizou-se ferramenta computacional para realização de simulações das condições térmicas de três tipos de habitações populares - alongada, ramificada e compacta - e das seguintes estratégias: presença ou ausência de ventilação natural e sombreamento, massa térmica leve ou pesada, e Fator de Calor Solar alto ou baixo. Essas simulações foram realizadas para quatro condições climáticas do estado. Foram analisados os desempenhos de cada caso para identificar as estratégias e tipos de habitação recomendados para cada clima. De maneira geral, nos climas deNatal, Mossoró e Caicó viu-se que habitações com FCS baixo e com presença de ventilação natural possuem os melhores desempenhos. No clima de Areia, a ausência de ventilação aliada ao baixo FCS é que produziu os melhores desempenhos. O sombreamento melhora o desempenho nas cidades de clima quente, mas aumenta as horas com desconforto ao frio em Areia. A massa térmica varia de acordo com as demais estratégias, tendo casos em que habitações com massa térmica alta possuem melhores desempenhos que outros casos com massa térmica baixa. Por fim, viu-se que as estratégias para Natal, Caicó e Mossoró são bem semelhantes, com a recomendação de ventilação natural, FCS baixo nas vedações e sombreamento. Para Areia, a recomendação é não ventilar, ter FCS baixo e massa térmica alta.