Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism

Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism

Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação

CARDOSO, M. F. ; RAMOS, A. S. M. . Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação. Revista Espaço Acadêmico (UEM) , JCR, v. 10, p. 150-158, 2010.

Desenvolvimento de coleções de fontes de informação eletrônica em bibliotecas universárias

O contexto hodierno caracteriza-se como um panorama de uso contínuo de informação nas mais variadas esferas da sociedade. A informação é usada em diversos contextos sob vários formatos e isso se torna possível com a evolução tecnológica realizada em ritmo acelerado, sobretudo nos últimos dois séculos. Essa evolução trouxe consigo a possibilidade ampliada de acesso à informação, mas por outro lado, impôs desafios circunstanciais no seu tratamento e difusão. Nos diversos tipos de unidades de informação, faz-se necessária a adoção de estratégias para a melhoria do gerenciamento e desenvolvimento das coleções, sobretudo as coleções digitais. De tal modo, o trabalho visa a traçar um panorama ligado às questões relacionadas à comunicação cientifica com a bibliotecas universitárias, com vistas a ampliar o debate sobre o desenvolvimento digital de coleções de periódicos em bibliotecas universitárias, bem como aspectos relacionados à adoção de critérios de seleção e avaliação destes itens de informação. Aborda os casos específicos, como o do Portal Capes e o SciELO como coleções digitais de periódicos sujeitos a estratégias de desenvolvimento das coleções. Aponta opções para a melhoria da gestão da coleção digital em bibliotecas universitárias. A metodologia empregada foi a de pesquisa bibliográfica em uso de fontes eletrônicas e convencionais, bem como análise de critérios utilizados na Avaliação e Coleções para Bibliotecas Universitárias e o Indicadores Qualis pela Condenação de Aperfeiçoamento de Pessoa de Ensino Superior (CAPES).

Os impactos tecnológicos da implantação da nota fiscal eletrônica: um estudo de casos múltiplos

Increasingly, the Information Technology is used in the society, including the private, public and third sector organizational context. Technological tools are created in order to speed, automate, control and monitor processes. These technologies generate impacts on areas that permeate their use and the objective of this study is to investigate the implementation process of the Eletronic Invoice and the impacts arising from this technological tool in companies. For that, case studies have been conducted in three companies that emit and receive Eletronic Invoice, in a Information System consultancy, that provides softwares of Eletronic Invoice, and in a State Tax Department. Data collection was performed with organizations representatives through electronic questionnaires. The study concludes that it is expected, by the investigated organizations, that the tool reaches the benefits offered by the Tax Administration. However, these benefits have not been identified yet and neither have the use of methodologies in order to identify them. Moreover, the main impact found was the need for better training and participant´s technical qualification, followed by reducing printing costs and paper purchase

Vigilância eletrônica no trabalho bancário: do controle consentido ao totalitarismo corporativo

This dissertation addresses the electronic surveillance theme in the banking context. The research that originated it, which was held in an organization called for the fiction name Banco Total, started from the following driving question: How do workers at a bank perceive electronic surveillance at their process of work? The research s main objective was to comprehend how workers perceive electronic surveillance at their process of work. The study adopted an interdisciplinary perspective, having Management as the original field, establishing a dialogue with others disciplines, like Philosophy and Sociology. About its methodology, it s a qualitative research that addressed its object in oral (interviews with live history elements) way. . Ten individuals were interviewed. The analytical process utilized the hermeneutical-dialectics technique.. From the analyses (hermeneutics) of the data, the following themes have emerged: (i) Acquiescence ; (ii) Monitoring; (iii) Time and Motion; (iv) Fear; (v) Interdiction; and (vi) Resistance . From the discussion (dialectic) of the results, this work presents three synthetic propositions that culminate in the following dimensions (i) control; (ii) acquiescence; (iii) corporative totalitarianism. It can be concluded that electronic surveillance is one mechanism of control emerged from the apply of technology at Total Bank; that information technology has been improving the control mechanisms of management theories; and that the imbrications between management and material technology control mechanisms at a context where there is acquiescence by workers contribute for the emergency of corporative totalitarianism components

Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Propriedade fotoluminescente da ZrO2: Tb+3, Eu+3, Tm+3 obtida pelo método de polimerização de complexos

Recent studies are investigating a new class of inorganic materials which arise as a promising option for high performance applications in the field of photoluminescence. Highlight for rare earth (TR +3 ) doped, which have a high luminous efficiency, long decay time and being able to emit radiation in the visible range, specific to each element. In this study, we synthesized ZrO2: Tb +3 , Eu +3 , Tm +3 nanoparticles complex polymerization method (CPM). We investigated the influences caused by the heat treatment temperature and the content of dopants in zirconia photoluminescent behavior. The particles were calcined at temperature of 400, 500 and 600 ° C for two hours and ranged in concentration of dopants 1, 2, 4 and 8 mol% TR +3 . The samples were characterized by thermal analysis, X-ray diffraction, photoluminescence of measurements and uv-visible of spectroscopies. The results of X-ray diffraction confirmed the formation of the tetragonal and cubic phases in accordance with the content of dopants. The photoluminescence spectra show emission in the region corresponding simultaneous to blue (450 nm), green (550 nm) and red (615 nm). According to the results, ZrO2 particles co-doped with rare earth ions is a promising material white emission with a potential application in the field of photoluminescence

Modelagem molecular na caracterização eletrônica de oligopeptídeos e na descrição quântica da interação fármaco-receptor

In this dissertation, the theoretical principles governing the molecular modeling were applied for electronic characterization of oligopeptide α3 and its variants (5Q, 7Q)-α3, as well as in the quantum description of the interaction of the aminoglycoside hygromycin B and the 30S subunit of bacterial ribosome. In the first study, the linear and neutral dipeptides which make up the mentioned oligopeptides were modeled and then optimized for a structure of lower potential energy and appropriate dihedral angles. In this case, three subsequent geometric optimization processes, based on classical Newtonian theory, the semi-empirical and density functional theory (DFT), explore the energy landscape of each dipeptide during the search of ideal minimum energy structures. Finally, great conformers were described about its electrostatic potential, ionization energy (amino acids), and frontier molecular orbitals and hopping term. From the hopping terms described in this study, it was possible in subsequent studies to characterize the charge transport propertie of these peptides models. It envisioned a new biosensor technology capable of diagnosing amyloid diseases, related to an accumulation of misshapen proteins, based on the conductivity displayed by proteins of the patient. In a second step of this dissertation, a study carried out by quantum molecular modeling of the interaction energy of an antibiotic ribosomal aminoglicosídico on your receiver. It is known that the hygromycin B (hygB) is an aminoglycoside antibiotic that affects ribosomal translocation by direct interaction with the small subunit of the bacterial ribosome (30S), specifically with nucleotides in helix 44 of the 16S ribosomal RNA (16S rRNA). Due to strong electrostatic character of this connection, it was proposed an energetic investigation of the binding mechanism of this complex using different values of dielectric constants (ε = 0, 4, 10, 20 and 40), which have been widely used to study the electrostatic properties of biomolecules. For this, increasing radii centered on the hygB centroid were measured from the 30S-hygB crystal structure (1HNZ.pdb), and only the individual interaction energy of each enclosed nucleotide was determined for quantum calculations using molecular fractionation with conjugate caps (MFCC) strategy. It was noticed that the dielectric constants underestimated the energies of individual interactions, allowing the convergence state is achieved quickly. But only for ε = 40, the total binding energy of drug-receptor interaction is stabilized at r = 18A, which provided an appropriate binding pocket because it encompassed the main residues that interact more strongly with the hygB - C1403, C1404, G1405, A1493, G1494, U1495, U1498 and C1496. Thus, the dielectric constant ≈ 40 is ideal for the treatment of systems with many electrical charges. By comparing the individual binding energies of 16S rRNA nucleotides with the experimental tests that determine the minimum inhibitory concentration (MIC) of hygB, it is believed that those residues with high binding values generated bacterial resistance to the drug when mutated. With the same reasoning, since those with low interaction energy do not influence effectively the affinity of the hygB in its binding site, there is no loss of effectiveness if they were replaced.

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

A Servidão Administrativa e o Estado Regulador: Compatibilidade com o Princípio Constitucional da Legalidade e a Limitação ao Direito Real de Propriedade

The economic changes occurred in the 90s, with the restructuring and privatization of various sectors of the economy have led to a redefinition of the State role, assuming a position of regulator and supervisor of public services in place to direct its role as straight intervenor. It is through the regulatory agencies, autarchies with special legal personality under public law, that the Regulator State will act. In this context, the first objective of this research is to analyze the legality of easements imposed by entities of the Direct Administration and Regulatory Agencies, whose execution is delegated to legal persons of private law, being those public service companies or mixed-economy societies. This examination in question the limits of servitude as a restrictive institute of property rights, observing the principles of function, supremacy of the public interests over the private ones, legality and the separation of powers. Defend the property rights like a fundamental right and your insurance as determining factor of economic development and social justice. Use the procedure in use will be the historiccomparative procedure, in order to demonstrate the legality of the public act as a maximum attempt to preserve the balance between the expansion of public services in various sectors of the economy, and the preservation of property rights, through regulation

O impacto do pagamento da participação sobre a produção de petróleo e gás natural sobre a renda familiar e a propriedade no Município de Governador Dix-Sept Rosado no período de 1998 a 2004

This scientific study deals about the oil and natural gas production participation payment impact in the county of Governador Dix-sept Rosado, Rio Grande do Norte, between 1998 to 2004, applied to family income and property. To do so, this analysis focus on the ricardian´s theory exposition which merges from the concept of the mineral income, in concern to the legal establishment of royalties. This paper also shows the world evolution oil exploration, inserting Brazil in this scene as a oil and natural gas producter. It identifies the productive site of oil and natural gas in Rio Grande do Norte as the Potiguar Oil Area, characterizing its components in the demographic, physical and social aspects, to reflect in the focus point of observation which is the Governador Dix-sept Rosado county. The participation payment on oil and natural gas is demonstrated in a qualitative analysis both in Brazil as in Rio Grande do Norte. The payments given to the land owners in this federative unity are shown in the period of analysis of this essay. The study tells, based in a field research, the benefaction impact of the payment to the land owners over the income and property. The family income were highly impacted, causing economic social classes change to some land owners. The property had less or none impact. It was found negative externalities as the income utilization to other county uses, not causing a multiplier effect in the studied county. The fact of the not utilization of the properties on productive investments in order to supply the finite characteristic of oil and this source of royalties, contradicts one of the reasons of its establishment which is the payment for its productive exhaustion of a land resource

Proposta de um sistema de segurança eletrônica predial

This work presents a suggestion of a security system of land automation having as objective main the creation of a system capable from easy method, supervise the installations of a building with the goal to preserver security personal and patrimonial necessities, aim at portability low cost and use easiness. Was designed an alarms central and access controller that has digital and analogical inputs for sensors and outputs for buzzer, telephonic dialing and electronic lock. The system is supervised by software that makes solicitations of information to the alarms central through the one computer's serial port (RS-232). The supervisory software was developed in platform LabVIEW with displays the received data on a graphical interface informing the sensors' current states distributed in the building and system events as alarns occurrences. This system also can be viewed through the Internet for people registered by the land security's system administrator

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.