Estratégia de operações no varejo: um estudo sobre perfilar mercado, produto e operações no setor de supermercados

The objective of this Thesis is to investigate the strategic alignment between market end operations in the retail supermarket sector applying the concept product profiling by Hill (1993). To the developing was utilized a methodology of the cases study had were a evolvement if the action research into on of the RedeMais supermarkets. Through the interview, discussion and direct action became possible collect information necessary to direction this work, absorbing and understanding the methodology and thought form, action and management. This work contribute to development the create of the model adapted of the manufactory to service, the product matrix of the Hill, in which serve a tool to uncover the origins of misalignment that occur over time and to illustrate the phenomenon to executives gone support to decision

Metodologia para modelagem, validação e programação de controladores lógicos industriais usando statecharts básicos

Due of industrial informatics several attempts have been done to develop notations and semantics, which are used for classifying and describing different kind of system behavior, particularly in the modeling phase. Such attempts provide the infrastructure to resolve some real problems of engineering and construct practical systems that aim at, mainly, to increase the productivity, quality, and security of the process. Despite the many studies that have attempted to develop friendly methods for industrial controller programming, they are still programmed by conventional trial-and-error methods and, in practice, there is little written documentation on these systems. The ideal solution would be to use a computational environment that allows industrial engineers to implement the system using high-level language and that follows international standards. Accordingly, this work proposes a methodology for plant and control modelling of the discrete event systems that include sequential, parallel and timed operations, using a formalism based on Statecharts, denominated Basic Statechart (BSC). The methodology also permits automatic procedures to validate and implement these systems. To validate our methodology, we presented two case studies with typical examples of the manufacturing sector. The first example shows a sequential control for a tagged machine, which is used to illustrated dependences between the devices of the plant. In the second example, we discuss more than one strategy for controlling a manufacturing cell. The model with no control has 72 states (distinct configurations) and, the model with sequential control generated 20 different states, but they only act in 8 distinct configurations. The model with parallel control generated 210 different states, but these 210 configurations act only in 26 distinct configurations, therefore, one strategy control less restrictive than previous. Lastly, we presented one example for highlight the modular characteristic of our methodology, which it is very important to maintenance of applications. In this example, the sensors for identifying pieces in the plant were removed. So, changes in the control model are needed to transmit the information of the input buffer sensor to the others positions of the cell

Otimização Topológica com Termo-elasticidade Utilizando Elementos Tri3

This work proposes a formulation for optimization of 2D-structure layouts submitted to mechanic and thermal shipments and applied an h-adaptive filter process which conduced to computational low spend and high definition structural layouts. The main goal of the formulation is to minimize the structure mass submitted to an effective state of stress of von Mises, with stability and lateral restriction variants. A criterion of global measurement was used for intents a parametric condition of stress fields. To avoid singularity problems was considerate a release on the stress restriction. On the optimization was used a material approach where the homogenized constructive equation was function of the material relative density. The intermediary density effective properties were represented for a SIMP-type artificial model. The problem was simplified by use of the method of finite elements of Galerkin using triangles with linear Lagrangian basis. On the solution of the optimization problem, was applied the augmented Lagrangian Method, that consists on minimum problem sequence solution with box-type restrictions, resolved by a 2nd orderprojection method which uses the method of the quasi-Newton without memory, during the problem process solution. This process reduces computational expends showing be more effective and solid. The results materialize more refined layouts with accurate topologic and shape of structure definitions. On the other hand formulation of mass minimization with global stress criterion provides to modeling ready structural layouts, with violation of the criterion of homogeneous distributed stress

Otimização do fresamento de roscas internas com a técnica de interpolação helicoidal

In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Ssitema integrado de gestão pública: proposta de implantação de um sistema integrado de gestão, autuação e distribuição de termos circunstanciados e inquéritos policiais entre os juizados especiais criminais e delegacias de Natal

Universidade Federal do Rio Grande do Norte

O sertão vai para o Além-Mar : a relação centro e periferia e as fábricas de couro em Pernambuco nos setecentos

This thesis focuses on the economic relations in the interior of the Portuguese America, more specifically in Pernambuco Captancy in the 17th Century, concerning the discussion about center-periphery relationship and also the context of Brazilian colonial history. In addition, it portrays the exportations of leather to Portugal, their consequences in the Captaincy of Pernambuco and the businessmen involved in the trade and manufacturing of that product. In order to accomplish this work, manuscripts of Arquivo Histórico Ultramarino (Ultramarine Historical Archives), colonial narratives and maps of the mercantile loads have been used so that one can visualize that the manufacturing of leather and other products have provided a social and economical connection among Pernambuco, Recife as trade center, Olinda as administrative municipality and Portugal

Música dos espaços: paisagem sonora do Nordeste no movimento armorial

This work exams the presence of music in the imaginary constitution of spaces, taking as study s object part of the musical production of the Armorial Movement, officially casted in 1970 in the city of Recife, Pernambuco. From that so called, by the Armorial s discourse, the essence of the brazilian northeastern popular art , the armorialists has intended to make an art that express an idea of northeasternity and brazility . Tries to demonstrate how the music has exerted a basic function of condensation and spreading of the armorial aesthetics, auditorily delimiting the territory of Brazilian Northeastern and, at the same time, trying to impose a sonority to it. This work still analyses the elaboration of what would be a proper soundscape of the Northeastern and how this elaboration passes trough the desire of crystallization of an idealized space, perpetual, escape line of the characteristic modernizing and postmodernizing experience of the twentieth century, product, in turn, of the anxiety of conservation of the Northeastern as a shelter to the traditions that has been evidenced by the construction of an visibility and, also, an audibility to the so called northeastern universe. It analyses, too, the way as works the confrontation between the idea of a so called northeastern soundscape - sonorous events set taken as typical from the rural space - and a sonorous archives series produced since 1920 with the regionalist discourse, showing how was elaborated an armorial music that has intended to represent the brazilian Northeastern. It evidences how, to the elaboration of armorial music, it was managed elements from the European musical culture so called scholar. It argues that the utilization of, to the manufacture of the armorial thinking and aesthetics, of a European mimical capital, so called that way by Stephen Greenblat, was consequence of the intellectual leadership of the Movement, centered in the writer Ariano Suassuna. It argues that Suassuna, followed by the musicians and the artists of the Movement, has searched to evidence a genetic linking between what he has considered the Brazilian true popular art and the medieval Iberian culture. For in such a way, the music was taken as a formation element of the social imaginary and directed to verify a relationship between the Northeastern idealized by the Armorial and the music produced by the Movement. This work has searched, therefore, through the analysis of the armorial music, to study the possible confluences between music and the space that has produced it to, by this analysis, to think the complicity between music and history

Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Gestão do sistema de produção e práticas enxutas adotadas nas indústrias paraibanas: um estudo multicaso

The evolution of the practices and strategies of manufacturing management, over the years, has made many companies realign their production systems in order to raise their competitiveness and operational performance. However, in most cases these changes are made in a heterogeneous manner, which ends up leaving the production system without a defined goal, which may end up damaging the managerial strategies of the organization as a whole. Thus, some organizations seek to use techniques and/or successful production practices used by other companies, believing can be able to reproduce the same results. An efficient production system must be fully planned and appropriate to the strategic objectives of the organization. Thus, this paper aims to identify the manufacturing management strategies adopted in paraibanas industries, as well as identify the lean practices used by them. Thus, a qualitative study was conducted, using as methodological basis the multicase study. Were made: direct observations, semi-structured interviews and questionnaires applied to those responsible by the production sector of the participating companies. As a result, it was possible to identify the type of manufacturing management system adopted by companies. Where it was detected that Company A uses a system of Modern Mass Production with focus on productivity and low cost and the Company B is using Lean Manufacturing system focused on quality and diversity. In the two organizations was possible to realize the application of lean practices where the Company what does not use the LM, possessed lean practices in standard extremely mature of utilization.