Método Fuzzy para auxílio ao diagnóstico de câncer de mama em ambiente inteligente de telediagnóstico colaborativo para apoio à tomada de decisão

Breast cancer, despite being one of the leading causes of death among women worldwide is a disease that can be cured if diagnosed early. One of the main techniques used in the detection of breast cancer is the Fine Needle Aspirate FNA (aspiration puncture by thin needle) which, depending on the clinical case, requires the analysis of several medical specialists for the diagnosis development. However, such diagnosis and second opinions have been hampered by geographical dispersion of physicians and/or the difficulty in reconciling time to undertake work together. Within this reality, this PhD thesis uses computational intelligence in medical decision-making support for remote diagnosis. For that purpose, it presents a fuzzy method to assist the diagnosis of breast cancer, able to process and sort data extracted from breast tissue obtained by FNA. This method is integrated into a virtual environment for collaborative remote diagnosis, whose model was developed providing for the incorporation of prerequisite Modules for Pre Diagnosis to support medical decision. On the fuzzy Method Development, the process of knowledge acquisition was carried out by extraction and analysis of numerical data in gold standard data base and by interviews and discussions with medical experts. The method has been tested and validated with real cases and, according to the sensitivity and specificity achieved (correct diagnosis of tumors, malignant and benign respectively), the results obtained were satisfactory, considering the opinions of doctors and the quality standards for diagnosis of breast cancer and comparing them with other studies involving breast cancer diagnosis by FNA.

Classificação de técnicas e auxílio à navegação de busca com base em sua carga cognitiva, precisão e eficiência

Navigation, in both virtual and real environments, is the process of a deliberated movement to a specific place that is usually away from the origin point, and that cannot be perceived from it. Navigation aid techniques (TANs) have as their main objective help finding a path through a virtual environment to a desired location and, are widely used because they ease the navigation on these unknown environments. Tools like maps, GPS (Global Positioning System) or even oral instructions are real world examples of TAN usage. Most of the works which propose new TANs for virtual environments aim to analyze their impact in efficiency gain on navigation tasks from a known place to an unknown place. However, such papers tend to ignore the effect caused by a TAN usage over the route knowledge acquisition process, which is important on virtual to real training transfer, for example. Based on a user study, it was possible to confirm that TANs with different strategies affects the performance of search tasks differently and that the efficiency of the help provided by a TAN is not inversely related to the cognitive load of the technique’s aids. A technique classification formula was created. This formula utilizes three factors instead of only efficiency. The experiment’s data were applied to the formula and we obtained a better refinement of help level provided by TANs.

Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Análise do desempenho de um queimador infravermelho funcionando com gás liquefeito de petróleo e glicerina

The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with greater control of emissions due to the passage of exhaust gases through a macro-porous ceramic bed. This paper presents an infrared burner commercial, which was adapted an experimental ejector, capable of promoting a mixture of liquefied petroleum gas (LPG) and glycerin. By varying the percentage of dual-fuel, it was evaluated the performance of the infrared burner by performing an energy balance and atmospheric emissions. It was introduced a temperature controller with thermocouple modulating two-stage (low heat / high heat), using solenoid valves for each fuel. The infrared burner has been tested and tests by varying the amount of glycerin inserted by a gravity feed system. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by a data acquisition system which recorded real-time measurements of the thermocouples attached. The burner had a stable combustion at levels of 15, 20 and 25% of adding glycerin in mass ratio of LPG gas, increasing the supply of heat to the plate. According to data obtained showed that there was an improvement in the efficiency of the 1st Law of infrared burner with increasing addition of glycerin. The emission levels of greenhouse gases produced by combustion (CO, NOx, SO2 and HC) met the environmental limits set by resolution No. 382/2006 of CONAMA

Nas asas de Ícaro: uma análise da Pedagogia Freinet do 2º ao 5º ano do Ensino Fundamental na perspectiva da ação docente continuada

Célestin Freinet was one of the most memorable educators of the twentieth century. He presented some educational alternatives that had the objective of stimulating the construction of pedagogic actions to promote the social development of the student based upon a work centered on the free expression as the way to self-structure the knowledge. With a permanent proposal of research based on the enquiry-based learning, Freinet set human capacity (cognitive, social-affective, psychometrical) taking cooperation in consideration on the processes of knowledge construction. Based on this referential, this present work has the objective to show Freinet s pedagogy in a continuous teaching action from 2nd to 5th grade focusing the teacher s discourse and also the educative practice of the students of a city public school in Natal. The observed work revealed the teacher s discourse and educative experience and delineated the students development while immersed into Freinet s educational practice. By virtue of the nature and specificity of the theme that guided our research, we chose a qualitative approach to it, as a way of conducting ourselves during our investigative process. We observed and analyzed the method that was used to conduct the activities in the classroom, as well as the ways of expression that the children used through drawings, words (oral text), or through writing. We highlight, among the written texts, the individual and collective texts, and also letters and notes, which during some moments served as a base to express a diversity of languages. The results, after a analyzing the research data, point towards a teaching practice that favors the construction of a significant learning process through the grasping of the school environment, on which all these factors are based: society, knowledge acquisition, abilities, attitudes and values. This learning process also strengthens human solidarity bonds and mutual tolerance, on which the student s social life is seated.

Avaliar na alfabetização: uma reflexão sobre as dificuldades docentes

Our work leads up to the context of evaluation during alphabetization process as a moment of an educational action cycle that requires planning, teaching and learning of reading and writing. It aimed to research the difficulties lived by teachers of a public elementary school during the specific task of evaluating children in the alphabetization process. This qualitative research took place as a case study at Emília Ramos Municipal School, in Natal, capital city of Rio Grande do Norte State, Brazil. Semi-structured interview and questionnaire were used as fact-gathering proceedings. Two pedagogical advisers and seven teachers formed the group of research subjects. All of them worked with elementary school first cycle classes, in that school, in the year of 2003. The analysis shows that teachers difficulties concern to theoretic questions of conceptual and methodological orders, although these questions indicate an important knowledge of teachers about alphabetization and evaluation. Our reflection about these problems articulates two points: alphabetization and evaluation. Concerning alphabetization, we took reference on Psychogenetic studies of Ferreiro and Teberosky (1985) which emphasizes fundamental points for a coherent evaluation practice: a) objective knowledge is not a beginning data; it is a construction process, which the learner does not conquest step by step on a linear way; b) objective knowledge acquisition happens through a global re-construction, and some of them may seem mistakes if we consider conventional writing but these mistakes are constructive and necessary. We also took reference on Interactionist-constructivist theory. Here, Vygotsky (1984) proposes that writing must be specially understood as language, symbolical activity, cultural practice. So, acquisition of writing process, as language learning, must be understood as a development of abilities relative to symbolical and communicative activity of sense production. On this way, Hoffmann (1994) advises that is necessary to overtake current evaluation practices, limited by their terminality character, only pointing right or wrong questions. According to a new paradigm, valuation appears as one of the mediations by which teachers must indicate re-ordination of pupil s knowledge, and re-organize their own practices too. The comprehensions of these questions plays decisive part in order to overtake our difficulties in evaluating. Besides, it points a way to build a coherent valuate practice, with an emancipating character and able to create new teaching-and-learning situations, leading to a better alphabetization Pedagogy

Desenvolvimento de um modelo de gestão do conhecimento para a melhoria do processo de desenvolvimento de produtos

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Desenvolvimento de uma arquitetura em hardware prototipada em FPGA para aplicações genéricas utilizando redes neurais artificiais embarcadas

This work proposes hardware architecture, VHDL described, developed to embedded Artificial Neural Network (ANN), Multilayer Perceptron (MLP). The present work idealizes that, in this architecture, ANN applications could easily embed several different topologies of MLP network industrial field. The MLP topology in which the architecture can be configured is defined by a simple and specifically data input (instructions) that determines the layers and Perceptron quantity of the network. In order to set several MLP topologies, many components (datapath) and a controller were developed to execute these instructions. Thus, an user defines a group of previously known instructions which determine ANN characteristics. The system will guarantee the MLP execution through the neural processors (Perceptrons), the components of datapath and the controller that were developed. In other way, the biases and the weights must be static, the ANN that will be embedded must had been trained previously, in off-line way. The knowledge of system internal characteristics and the VHDL language by the user are not needed. The reconfigurable FPGA device was used to implement, simulate and test all the system, allowing application in several real daily problems

Análise teórico-experimental do coeficiente de perfomance (COP) de um sistema de refrigeração por jato-compressão

The use of waste heat of energy conversion equipment to produce a cooling effect, consists currently in a very interesting way of efficiency improvement of energy systems. The present research has as intention the theoretical and experimental study of a new intermittent refrigeration system ejector cycle characteristics, with use of waste heat. Initially, was doing a bibliographical survey about the vapor ejector refrigeration system technology. In the following stage was doing a simulation of the corresponding thermodynamic cycle, with preliminarily intention to evaluate the performance of the system for different refrigerants fluids. On the basis of the results of the simulation were selected the refrigerant fluid and developed an experimental group of benches of the refrigeration system considered, where pressure and temperature sensory had been inserted in strategical points of the refrigeration archetype and connected to a computerized data acquisition system for measure the refrigerant fluid properties in the thermodynamic cycle. The test results obtained show good agreement with the literature

Análise de desempenho de um refrigerador de pequeno porte com drop in de refrigerantes hidrocarbonetos

From what was stated in the Montreal Protocol, the researchers and refrigeration industry seek substitutes for synthetic refrigerants -chlorofluorocarbons (CFCs) and HCFCs (HCFC) - that contribute to the depletion of the ozone layer. The phase-out of these substances was started using as one of the replacement alternatives the synthetic fluids based on hydro fluorocarbons (HFCs) that have zero potential depletion of the ozone layer. However, contribute to the process of global warming. HFC refrigerants are greenhouse gases and are part of the group of gases whose emissions must be reduced as the Kyoto Protocol says. The hydrocarbons (HC's), for not contribute to the depletion of the ozone layer, because they have very low global warming potential, and are found abundantly in nature, has been presented as an alternative, and therefore, are being used in new home refrigeration equipment in several countries. In Brazil, due to incipient production of domestic refrigerators using HC's, the transition refrigerants remain on the scene for some years. This dissertation deals with an experimental evaluation of the conduct of a drinking fountain designed to work with HFC (R-134a), operating with a mixture of HC's or isobutane (R-600a) without any modification to the system or the lubricating oil. In the refrigeration laboratory of Federal University of Rio Grande do Norte were installed, in a drinking fountain, temperature and pressure sensors at strategic points in the refrigeration cycle, connected to an acquisition system of computerized data, to enable the mapping and thermodynamics analysis of the device operating with R-134a or with a mixture of HC's or with R-600a. The refrigerator-test operating with the natural fluids (mixture of HC's or R-600a) had a coefficient of performance (COP) lower than the R-134a

Análise da lubricidade do biodiesel brasileiro de ésteres etílicos de soja e girassol

Fuel is a material used to produce heat or power by burning, and lubricity is the capacity for reducing friction. The aim of this work is evaluate the lubricity of eight fossil and renewable fuels used in Diesel engines, by means of a HFRR tester, following the ASTM D 6079-04 Standard. In this conception, a sphere of AISI 52100 steel (diameter of 6,000,05 mm, Ra 0,050,005 μm, E = 210 GPa, HRC 624, HV0,2 63147) is submitted to a reciprocating motion under a normal load of 2 N and 50 Hz frequency to promote a wear track length of 1.10.1mm in a plan disc of AISI 52100 steel (HV0,05 18410, Ra 0,020,005 μm). The testing extent time was 75 minutes, 225,000 cycles. Each one test was repeated six times to furnish the results, by means of intrinsic signatures from the signals of the lubricant film percentage, friction coefficient, contact heating, Sound Pressure Level, SPL [dB]. These signal signatures were obtained by two thermocouples and a portable decibelmeter coupled to a data acquisition system and to the HFRR system. The wettability of droplet of the diesel fuel in thermal equilibrium on a horizontal surface of a virgin plan disc of 52100 steel, Ra 0,02  0,005 μm, were measured by its contact angle of 7,0  3,5o, while the results obtained for the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of soybean oil were, respectively, 7,5  3,5o, 13,5  3,5o e 19,0  1,0o; for the distilled water, 78,0  6,0o; the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of sunflower oil were, respectively, 7,0  4,0o, 8,5  4,5o e 19,5  2,5o. Different thickness of lubricant film were formed and measured by their percentage by means of the contact resistance technique, suggesting several regimes, since the boundary until the hydrodynamic lubrication. All oils analyzed in this study promoted the ball wear scars with diameters smaller than 400 μm. The lowest values were observed in the scar balls lubricated by mixtures B100, B20 and B5 of sunflower and B20 and B5 of soybean oils (WSD < 215 μm)

Análise da indução de fluxo de ar por convecção livre em chaminé solar

Experiments were performed to study the effect of surface properties of a vertical channel heated by a source of thermal radiation to induce air flow through convection. Two channels (solar chimney prototype) were built with glass plates, forming a structure of truncated pyramidal geometry. We considered two surface finishes: transparent and opaque. Each stack was mounted on a base of thermal energy absorber with a central opening for passage of air, and subjected to heating by a radiant source comprises a bank of incandescent bulbs and were performed field tests. Thermocouples were fixed on the bases and on the walls of chimneys and then connected to a data acquisition system in computer. The air flow within the chimney, the speed and temperature were measured using a hot wire anemometer. Five experiments were performed for each stack in which convective flows were recorded with values ranging from 17 m³ / h and 22 m³ / h and air flow velocities ranging from 0.38 m / s and 0.56 m / s for the laboratory tests and air velocities between 0.6 m/s and 1.1m/s and convective airflows between 650 m³/h and 1150 m³/h for the field tests. The test data were compared to those obtained by semi-empirical equations, which are valid for air flow induced into channels and simulated data from 1st Thermodynamics equation. It was found that the chimney with transparent walls induced more intense convective flows than the chimney with matte finish. Based on the results obtained can be proposed for the implementation of prototype to exhaust fumes, mists, gases, vapors, mists and dusts in industrial environments, to help promote ventilation and air renewal in built environments and for drying materials, fruits and seeds

Automação de um sistema rotatório para secagem do rejeito de maracujá

The rotary dryer is one of the most used equipments in processing industries. Its automatic control mode of operation is important specially to keep the moisture content of the final product in the desired value. The classical control strategies, like PID (proportional integral derivative) control, are largely used in the industrial sector because of its robustness and because they are easy to be implemented. In this work, a data acquisition system was implemented for monitoring the most relevant process variables, like: both inlet and outlet drying air temperature, dryer rotation, outlet air speed and humidity, and mass of the final product. Openloop tests were realized to identify a mathematical model able to represent the drying process for the rotary system. From this model, a PID controller was tuned using a direct synthesis method, assuming a first order trajectory. The PID controller was implemented in the system in order to control the inlet drying air temperature. By the end, closedloop tests (operating in automatic mode) were realized to observe the controller performance, and, after setting the best tune, experiments were realized using passion fruit seeds as raw material. The experiments realized in closedloop showed a satisfactory performance by the implemented control strategy for the drying air temperature of the rotary system

Sistema de aquisição de dados para estudos de transiente de pressão e detecção de vazamentos em oleodutos

In February 2011, the National Agency of Petroleum, Natural Gas and Biofuels (ANP) has published a new Technical Rules for Handling Land Pipeline Petroleum and Natural Gas Derivatives (RTDT). Among other things, the RTDT made compulsory the use of monitoring systems and leak detection in all onshore pipelines in the country. This document provides a study on the method for detection of transient pressure. The study was conducted on a industrial duct 16" diameter and 9.8 km long. The pipeline is fully pressurized and carries a multiphase mixture of crude oil, water and natural gas. For the study, was built an infrastructure for data acquisition and validation of detection algorithms. The system was designed with SCADA architecture. Piezoresistive sensors were installed at the ends of the duct and Digital Signal Processors (DSPs) were used for sampling, storage and processing of data. The study was based on simulations of leaks through valves and search for patterns that characterize the occurrence of such phenomena