Avaliação mecânica in vitro utilizando miniplacas quadradas e retangulares do sistema 2.0 mm em fraturas da região anterior de mandíbula

The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures

Racionalidade substantiva no processo decisório: um estudo em instituições que lidam com o tratamento oncológico infantojuvenil na cidade de Natal-RN

The present study regards an applied social research (qualitative) performed in two institutions which lead children s cancer treatment in Natal, Rio Grande do Norte. The main goal of this study is, as of a literature review at works which characterizes the first generations of study about substantive rationality, to detect Decision Making process related aspects that may serve as a basis to elaborate analysis categories from decision making process, aggregating them into a new study that may provide an advance to the theme in administrative science. The academic works based on the analysis model created by Mauricio Serva served as a basis to deep research into such theme, which verifies the predominant rationality in eleven administrative internal processes in productive organizations. This dissertation intends to go beyond the identification of the predominant rationality by elaborating new categories of analysis, and making possible the continuity of the subject in administrative science. Based on Guerreiro Ramos s work, which sees a kind of ideal organization, as known as isonomies, this study still calls upon Karl Polanyi s thoughts, which with the objective of comprehending the independent economic phenomenon of the value that allows considering non-market economies, find that the economy of the men is submerged in his social relations; it also rescues the studies from Max Weber who investigates the meaning of social action to better understand the rationality, and refers to the study of Jürgen Habermas, who proposes a broader conception about rationality, within the theory of communicative action. As a result of this theme s review, seven analysis categories of the decision making process have been formulated. They were applied in the institutions that had been chosen and helped to detect the type of predominant rationality in the categories of the decision making process. The results confirm that, although the decisions making process involves rational elements, such as information, identification of alternatives, there are also specific values of each individual with his experience and view oh the world, permeated not only by instrumental rationality, but also by substantive rationality. The study has verified that two similar institutions may show different types of rationality in the decision making process, when decision factors may tend to instrumental rationality, according to administration classic way, as well as they may emerge from substantive rationality, thus contributing to the process of emancipation of the human being in his sphere of work

Comunicação interna em empreendimento hoteleiro: um enfoque gerencial

Globalization, which increased the market to a position of competition and change never before experienced, also imposed a series of changes that have transformed the social systems, organizations increasingly complex. In this scenario, communication has received attention from modern managers. Research indicates that some sectors of activity, more than others, rely on communication as a tool for achieving their goals. The tourism sector, located in the service segment is configured as one of these activities, which the hotel is part of the composite product. With the intention to acknowledge these aspects in this study sought to analyze the characteristics of internal communication in a hotel project in the managerial perspective. To try to answer this purpose we constructed a framework based on authors that discuss organizational communication, internal communication and hotel businesses. For the purpose of research was chosen a unit of study to assess the views of managers regarding the issue. In the unit studied was sought to apprehend these meanings through interviews with a group of managers in the organization and analysis of documents. Data were analyzed through content analysis of Bardin (1977), with the technique of categorical analysis, as it sought to capture aspects that allow the description of the contents of the messages. The results pointed to an organizational reality based heavily on orality, who lives constantly with noise and using communication to regulate behavior. With little or no reflection on managerial communication inferred that subordinates should not absorb the message completely, a phenomenon that can not be responsible for the complete fulfillment thereof. Moreover, it was realized that the organization studied did not plan your communication, since, yet the views as a strategic tool to achieve your goals

Exclusão social e projetos habitacionais. Um estudo sobre conjuntos habitacionais, segregação e exclusão social em Natal/RN

In Natal s urban growth process it is given that the performance period of the National Housing Bank (BNH, 1964-1986) was marked by the intense expansion of the urban grid and configuration of outskirts, through the construction of social housing developments. Implanted in segregated areas of the existing formal city, the population installed in these complexes was also excluded from their rights, considering that the housing defines itself not only by the physical dwelling, but also by its access to urban infrastructure, facilities, services, and others. From this reality and the verification of the city s exclusion and sociospatial segregation processes, we aimed to quantitatively demonstrate levels of social exclusion in Natal, based on the methodology developed by Sposati (2000) and adapted by Genovez (2002), which relates IBGE s (Brazilian Institute of Geography and Statistics) database underlying variables such as income, schooling and dwelling s quality. The research unveiled some spatial patterns promoted by the social housings: in these areas islands were developed with higher indicators than surrounding areas, revealing internal hierarchies in the city s outskirts

Influência do método de síntese e caracterização de pós compósitos de NiO- Ce1-xEuxO2-δ para anodos catalíticos de células a combustível

Fuel cells are electrochemical devices that convert chemical energy into electricity. Due to the development of new materials, fuel cells are emerging as generating clean energy generator. Among the types of fuel cells, categorized according to the electrode type, the solid oxide fuel cells (SOFC) stand out due to be the only device entirely made of solid particles. Beyond that, their operation temperature is relatively high (between 500 and 1000 °C), allowing them to operate with high efficiency. Another aspect that promotes the use of SOFC over other cells is their ability to operate with different fuels. The CeO2 based materials doped with rare earth (TR+3) may be used as alternatives to traditional NiO-YSZ anodes as they have higher ionic conductivity and smaller ohmic losses compared to YSZ, and can operate at lower temperatures (500-800°C). In the composition of the anode, the concentration of NiO, acting as a catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, providing internal reform in the cell. In this work compounds of NiO - Ce1-xEuxO2-δ (x = 0.1, 0.2 and 0.3) were synthesized from polymeric precursor, Pechini, method of combustion and also by microwave-assisted hydrothermal method. The materials were characterized by the techniques of TG, TPR, XRD and FEG-SEM. The refinement of data obtained by X-ray diffraction showed that all powders of NiO - Cex-1EuxO2-δ crystallized in a cubic phase with fluorite structure, and also the presence of Ni. Through the characterizations can be proved that all routes of preparation used were effective for producing ceramics with characteristics suitable for application as SOFC anodes, but the microwave-assisted hydrothermal method showed a significant reduction in the average grain size and improved control of the compositions of the phases

Produção, acúmulo e decomposição da serrapilhadeira e repartição da precipitação pluviométrica por espécies da caatinga

This study aimed to establish patterns of dynamics of litter and redistribution of rainfall of Caatinga vegetation. Sampling was done monthly for twenty three months in four areas: degraded, successional primary stage, secondary stage and late stage. We installed 72 collectors of 1.0 mx 1.0 m, with nylon fabric background in three areas. Litter deposited was fractionated into leaves, twigs, reproductive structures and miscellaneous, dried and weighed. To assess the stock of accumulated litter we used metal frame with dimensions of 0.5 mx 0.5 m, thrown randomly and collected monthly, taken to the laboratory for oven drying and weighed. To evaluate the decomposition, 40g of litter were placed in nylon bags (litterbags) mesh 1 mm ², dimensions 20.0 x 20.0 cm, being distributed on the soil surface and removed monthly, cleaned, dried and weighed. To evaluate the contribution of rainfall we used interceptometers installed 1.0 m above the ground surface, distributed under the canopy of six species of the caatinga, which evaluated the stemflow through collecting system installed around the stems of these species. The deposition of litter in the primary stage was 2.631,26 kg ha-1; 3.144,89 kg ha-1 in the secondary stage; 3.144,89 kg ha-1 in the late stage. The fraction of leaves was the largest contributor to the formation of litter in three stages. The degraded area showed greater accumulation of litter and decomposition has been sluggish during the dry period. We conclude that occurred greater litterfall in later stages. The late successional stage showed faster decomposition of litter, the evidence that is a better use of litter in nutrient cycling processes and incorporation of organic matter to the soil. The time required to decompose 50 % of the litter in the later stages of succession was lower indicating greater speed of release and reuse of nutrients by the vegetation. The specie jurema preta with less leaf area and consists of leaflets, showed greater internal precipitation in rain events of greater magnitude. The stemflow was not influenced by DAP and basal area. The water lost by trapping represented the largest proportion of total rainfall in all species studied

Acordos internacionais sobre a produção compartilhada de recursos naturais: a unitização interestatal na área do petróleo e gás sob o enfoque constitucional brasileiro

The apportionment of natural resources between sovereign States is a subject that relates many aspects of International law, as long as Constitutional Law, at the execution and application phases of international treaties that regulates the exploration of common goods. In this sense, because of their natural characteristics that creates an environment of constant migration and fixation in transboundary regions, terrestrial or maritime, the petroleum and the natural gas bound a complex juridical apparatus that can control the sovereign rights involved. This research is aim at accomplishing a study concerning the international agreements that enable the non-unilateral action, specifically the unitization treaties between sovereign States, as a manner to resolve situations related to the individualization of oil and/or gas reservoirs that go across their national borders. These agreements will be analyzed considering the international public law sources theory, bearing in mind yet the already existed experiences in this sense, not disregarding the way that this fact could affect Brazil. It will begin with an historical incursion over the unitization institute, covering its main characteristics and its formation and execution procedures, and finally it will address the Brazilian legal system and the comparative law threats the institute. The clauses of these relevant agreements will be analyzed in details, concerning its particularities and its contents. Because these agreements are international obligatory rules of law, it is indispensable that they are considered under the auspices of the international law system, focusing their nature and the subjects of international law and establishing them as sources of the international law, analyzing them, then, as international rules and the applicable law to these juridical relations, the conventional established, the consolidated international custom and the applicable International Law principles, appearing the State s responsibility as an important subject for the verification of the acts lawful practiced by States. The analysis of the apportionment of these natural resources ends with the individualization of possible exploitable marine oil fields located between the exclusive economic zone and the continental platform ends and the region administrated by the International Seabed Authority. At last, the Brazilian constitutional system appears as the mechanism of integration, application and execution of the international unitization agreements in Brazil, detaching the format and the proceedings that the international treaties take to acquire validity at the national legal system, passing through the treaties interpretation and the applicable constitutional principles, coming to its application in Brazil, considering the existing constitutional peculiarities and the role played by the National Agency of Petroleum, Natural Gas and bio-fuel ANP

Agir, aprender, formar, intervir, agir uma experiência dos consultores internos na gestão do conhecimento da Petrobrás UN-RNCE

This research aims at studying the formation of internal consultants in organizational setting in the joint resolution of problems, around the conversion of knowledge. The objective of research is to understand and explain the meanings attributed by Petrobras internal consultants to their practice and training for the conversion process of tacit knowledge into explicit, around the joint resolution of their problems with their collaborators. It has directed the next question: what the meanings assigned by the consultants of Unidade de Negócios Rio Grande do Norte e Ceara (UN-RNCE) in Knowledge Management (KM), for their interventionist and formative practices in problem solving, as well as conversion of tacit knowledge in explicit? This paper has assumed that there is a dual logic integrated into its daily practices: solving troubles and converting knowledge. The thesis has considered the daily practices of these consultants are characterized as epistemic spaces and permanent education through the conversion of knowledge. It has adopted the principles of multi-referential approach as foundations, regarding the translation of a variety of angles, perspectives and prospects which allow the interpretation and understanding of complex issues that are part of conversion of knowledge. The understanding and explanation of the senses are based on the methodology of the comprehensive interview; taking ownership is the sensitive listening for comprehensive interpretation of oral discourses of ten consultants, in addition to the autoscopy that putting into practice, thus, the stance of the researcher as an intellectual craftsman. Furthermore, it has assessed that the limits and possibilities for training and learning in the conversion of knowledge arise, on one hand from a predominantly driven training culture by the paradigm of technical rationality and one the other hand, from a set of relationship to knowledge and relation to know , revealed in the search for training in other dimensions. There are tensions between the local and global demands located in a situation marked by a systemic organization of knowledge. However, the context is perceived by researchers as impregnated by the discontinuity, unpredictability and uncertainty; mobilizing a number of elements necessary for the mediation in training practices of these consultants. Finally, it has set an instrumental and technological support, restricting the formation and undermining the position of the consultancy as nuclear function in Knowledge Management

Impactos da legislação ambiental brasileira na exportação de camarão: um estudo com exportadores de camarão do Rio Grande do Norte

Brazilian exportations come growing in a constant form in the last years, stimulated for the globalization and public politics directed toward the increase of the internal surplus. In this context the objective of this work was to investigate the perception of the shrimp exporting entrepreneurs of Rio Grande do Norte, with relation to the impact of the Brazilian environmental legislation in the companies competitiveness at the external market. From data collected from the controllers of the companies, it was used a survey methodology, with exploratory and descriptive character. The results found in this study indicate that the companies, in general way, understand that the environmental legal requirements do not confuse nor help in the search and conquest of new international markets. A little more of the half of the researched companies, does not see the legislation rigid as important factor of competitiveness. However a sufficiently significant percentage, already has a more strategical vision on the subject, or at least already it heard to speak on such possibility

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Estudo térmico e de materiais na construção de casas populares com blocos confeccionados a partir de um composto a base de cimento, gesso, eps e raspa de pneu

We built an experimental house on an UFRN´s land using blocks made by a composite consisting of cement, plaster, EPS, crushed rubber and sand. Several blocks were made from various compositions and we made preliminary tests of mechanical and thermal resistance, choosing the most appropriate proportion. PET bottles were used inside the block to provide thermal resistance. In this work, a second function was given to the bottles: to serve as a docking between the blocks, because the ends of the cylinders came out of each block on top as well as at the bottom, with the bottom cut, allowing to fit of the extremities of the upper cylinder of a block in the lower holes of the other one, which were formed by the cutting already mentioned. Minimum compression tests were performed according to ABNT standards for walls closing blocks (fence). With that house built, we did studies of thermal performance in order to ascertain conditions of comfort, checking external and internal temperatures in the walls and in the ambient, among other variables, such as wind speed and relative humidity. The resulting blocks provided adequate thermal insulation to the environment, where the walls presented differences up to 11.7 ºC between the outer and inner faces, getting the maximum temperature inside the house around 31 °C, within the so-called thermal comfort zone for warm climates. At the end of the experiments it was evident the effectiveness of that construction in order to provide thermal comfort in the internal environment of the house, as well as we could confirm the viability of building houses from recyclable materials, reducing the constructive costs, becoming a suitable alternative for low- incoming families. Moreover, besides the low cost, the proposal represents an alternative use of various recyclable materials, therefore considered an ecological solution

Movimento estudantil e serviço social no capitalismo contemporâneo: tendências e particularidades

This dissertation aims to analyze the social direction in which the Student Movement in Social Work in Brazil (ENESSO) has gone through. This is done considering how the functioning of the National Executive, the Brazilian Social Work Student union has operated. The research analyzed their political position regarding the university as well as professional education in the period of 2003 to 2008. The study s theoretical and methodological object was obtained according to its structural, juncture, and time determinants. All of the mentioned elements considered the contemporary capital crisis and its implications towards the State and Society emphasizing specifically the changes that occurred in the University regarding professional education. For the purpose of data collection and production, a documental and field research was realized. Thus, interviews were done considering one manager of each management period of the ENESSO group in the time span of 2003 to 2008. Some subjects that represented the Brazilian Social Work Teaching and Research Association (ABEPSS) as well as were also interviewed. These subjects have had a relevant role in partnership with these entities and represented students in the contemporary scene. Results suggest that ENESSO has developed work that defends a project of a public, free and laic quality university. This entity also defends a project that considers the 1996 Curricular Guidelines. Currently, there is internal dispute in the social direction of the MESS, this is seen amongst political groups that diverge in opinions related to the analysis done by the Lula government regarding the political role that the National Student Union-UNE has taken in the counter-reform of higher education. This current juncture is seen as extremely individualist and it results as in unfavorable for the collective organization of the working class, especially regarding student movement. MESS has been going through a moment of profound instability and this dimension is being expressed by the absence of national coordinator for the 2008/2009 management period at ENESSO. Even though there are difficulties, it is possible to point out partnership of the entities that represent the national Social Work in Brazil. These partnerships are all related to a struggle and search for the development of a professional project that leads towards the sociability awareness that goes beyond capital.

Análise cefalométrica: ortodontistas x radiologistas

Cephalometric analysis is the mensuration of linear and angular measures through demarcation points as distances and lines on teleradiography, and is considered of fundamental importance for diagnosis and orthodontic planning. In this manner, the objective of this research was to compare cephalometric measurements obtained by dentists and radiologists from the analysis of the same radiograph, in a computerized cephalometric analysis program. All research participants marked 18 cephalometric points on a 14-inch notebook computer, as directed by the program itself (Radiocef 2®). From there, they generated 14 cephalometric parameters including skeletal, dental-skeletal, dental and soft tissue. In order to verify the intra-examiner agreement, 10 professionals from each group repeated the marking of the points with a minimum interval of eight days between the two markings. The intra-group variability was calculated based on the coefficients of variation (CV). The comparison between groups was performed using the Student t-test for normally distributed variables, and using the Mann-Whitney test for those with non-normal distribution. In the group of orthodontists, the measurements of Pog and 1-NB, SL, S-Ls Line, S-Li Line and 1.NB showed high internal variability. In the group of radiologists, the same occurred with the values of Pog and 1-NB, S-Ls Line, S-Li Line and 1.NA. In the comparison between groups, all the analyzed linear values and two angular values showed statistically significant differences between radiologists and dentists (p <0.05). According to the results, the interexaminer error in cephalometric analysis requires more attention, but does not come from a specific class of specialists, being either dentists or radiologists.

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104