21 resultados para Função Produção
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
A presente dissertação representa uma contribuição na resolução dos problemas que se apresentam no setor das indústrias de cerâmica vermelha, apresentamos um modelo, baseado na estratégia do QFD (Desdobramento da Função Qualidade), na qual associa os requisitos dos consumidores na elaboração dos projetos do produto e dos processos de produção. A qualidade do produto é avaliada tanto no aspecto interno(especificações técnicas) quanto no aspecto externo (qualidades exigidas pelos clientes). A pesquisa mostra, além da realidade que vive o setor das indústrias de cerâmica, a importância e os atributos da qualidade definidos pelos consumidores relativo aos tijolos cerâmicos de vedação. O trabalho também mostra os resultados da aplicação do modelo numa das empresas do setor, através de desdobramentos da qualidade exigida, se estabelece a qualidade planejada, mostra ainda a posição da empresa em relação aos concorrentes em função do desempenho do produto. Procura-se ainda, através de sugestões de melhorias, atacar os problemas das falhas na qual geram o desperdício
Resumo:
The scale is defined as chemical compounds from inorganic nature, initially soluble in salt solutions, which may precipitate accumulate in columns of production and surface equipment. This work aimd to quantify the crystalline phases of scale through the Rietveld method. The study was conducted in scale derived from columns production wells in development and recipients of pigs. After collecting samples of scale were performed the procedure for separations of inorganic and organic phase and preparation to be analyzed at the X-ray Laboratory. The XRD and XRF techniques were used to monitor whether identifying and quantifying crystalline phases present in the deposits. The SEM technique was used to visualize the morphology of the scales and assess their homogeneity after the milling process. XRD measurements were performed with and without milling and with or without the accessory spinner. For quantify crystalline phases the program DBWStools was used. The procedure for conducting the first refinement was instrumental in setting parameters, then the structural parameters of the phases in the sample and finally the parameters of the function profile used. In the diffraction patterns of samples of scale observed that the best measures were those that passed through the mill and used the accessory spinner. Through the results, it was noted that the quantitative analysis for samples of scale is feasible when need to monitor a particular crystalline phase in a well, pipeline or oil field. Routinely, the quantification of phases by the Rietveld method is hardwork because in many scale was very difficult to identify the crystalline phases present
Resumo:
The civil liability of the distribution and retail fuel stems from the fact business activity developed to be high risk and can be said as risk inherent or latent danger that has predictability and normality characterized by placing the consumer in a position of vulnerability, such as the environment, both public policies defined and constitutional protection. Consumer protection as a fundamental right and the environment as the primacy of social order aims the welfare and social justice, as inserted right to the third dimension, are guarded by the State when it creates operational standards through public policies and indirectly intervenes in the economic order. This intervention is due to consumer protection and the environment are economic order principles, founded on free initiative and free competition, ensuring everyone a dignified existence which underlies the irradiation of fundamental rights in private initiative, before the commercial evaluation, mass consumption, the emergence of new technologies that link consumers to the environment before the protection of life, health and safety and ensuring a better quality of life for present and future generations. To repair this damage and the right to information are provided as fundamental rights that put the person at the epicenter of the relations and collective interest stands out against individual interests that to be done need public-private partnership. In such a way that the used methodology was an analysis of documents correlating them with bibliographic sources whose goals are to recognize the civil responsibility as limit to subjective right, having to develop a social function where guilt and risk grow distant and the damage is configured as a consequence of inherent risk, requiring the State interventional postures in fulfilling its public policy; prevailing in these risky activities the solidarity of those involved in the chain of production and socialization of damage forward those are provided directly of products of hazardous nature that put in a position of vulnerability the environment and the consumer
Resumo:
Emerald mining is an important area of the economy in Brazil, country which is in second place among the exporting nations of this gem. Due to the process of extraction, a great amount of reject is generated. Since there is no appropriate destination, the reject is abandoned around the mining industries, contributing to environment degradation. Nowadays, some of the most relevant things to an industry in general are: energy conservation, cost reduction, quality and productivity enhancement. The production of isolating, transformed refractory materials achieves the sustainability dimension when protection of the environment is incorporated to such process. This work investigates the use of emerald mining rejects in the ceramic body of refractory materials, aiming at obtaining a product whose characteristics are compatible with commercial products and, at the same time, allow the use of such rejects to solve the environmental issue caused by its disposal in nature. X-ray fluorescence analysis show that the emerald reject obtained after the flotation to extract molybdenum and mica has 70% of silica and alumina (SiO2+Al2O3) and 21% of a basic oxides and alkaline metals and earthy alkaline mixture (Na2O, K2O, CaO e MgO). Because of the significant amount of silica and alumina present in the reject, four refractory ceramic bodies were prepared. Samples with a rectangular shape and dimensions 100x50x10 mm were pressed in a steel mold at 27,5 MPa and sintered at 1200ºC for 40 min. under environment atmosphere in a resistive oven. The sintered samples were characterized in relation to the chemical composition (FRX), mineralogical composition (DRX), microstructure (MEV) and physical and mechanical properties. The results indicate that the mixture with 45% of reject, 45% of alumina and 10% of kaolin presents a refractory quality of 1420ºC, dimensional linear variation below 2.00%, apparent specific mass of 1,56 g/cm3 and porosity of 46,68%, which demonstrates the potential use of the reject as raw material for the industry of isolating transformed refractory materials
Resumo:
Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk
Resumo:
O vasto número de pesquisas sobre produção oral no ensino de Inglês como Língua Estrangeira (ILE) ao redor do mundo (p. ex. LITTLEWOOD, 1981; BROWN; YULE, 1983; BROWN, 1994; UR, 1996; CARTER; MCCARTHY, 1997; BROWN, 1994; 2004; ELLIS, 2008), assim como estudos sobre aspectos cognitivos e de aquisição da produção oral (SWAIN, 1985; 1995; LEVELT, 1989; SWAIN; LAPKIN, 1995; SKEHAN; FOSTER, 1997; 1999; ROBINSON, 2001; BYGATE, 2001; D‟ELY;WEISSHEIMER, 2004; GUARÁ-TAVARES, 2007; WEISSHEIMER, 2007; BERGSLEITHNER, 2009; dentre outros) têm revelado aspectos para um ensino de ILE mais eficaz e motivador. Com a proposta de contribuir para esse avanço, o presente estudo está inserido no paradigma qualiquantitativo de pesquisa no campo da Linguística Aplicada (LA), primordialmente com base nos estudos de Moita Lopes (1996; 2006), para quem a LA está centrada na resolução de problemas de uso da linguagem, cujo foco está na linguagem de natureza processual. O estudo tem como objetivo verificar as percepções de 34 alunos, de quatro turmas distintas de um curso de ILE, em uma escola privada de línguas, acerca de sua produção oral, ao participarem de atividades orais. O corpus da pesquisa foi gerado pelas respostas dos alunos a questionamentos sobre sua produção oral, em duas fases, no início e no meio do curso, além de uma entrevista semiestruturada realizada com dez dos alunos, ao final do curso, com o intuito de verificar suas percepções sobre sua produção oral. As discussões relacionadas à produção oral em sala de aula de ILE têm respaldo teórico nos trabalhos de Littlewood (1981), Brown e Yule (1983), Almeida Filho (1993), Brown (1994), Ur (1996), Carter e McCarthy (1997), Nunan (1999), Brown (2004) e Ellis (2008), que explicam fenômenos que exercem influência na produção oral, tais como afeto, interação, características de atividades orais, dentre outras variáveis em relação a aspectos cognitivos da produção oral analisadas pelos estudos de Swain (1985; 1995), Levelt (1989), Swain e Lapkin (1995), Skehan e Foster (1997; 1999), Robinson (2001) e Bygate (2001). A análise e discussão dos dados tem como base a Gramática Sistêmico-Funcional proposta por Halliday (1985; 1994) e posteriormente desenvolvida por Halliday e Hasan (1989), Halliday e Mathiessen (2004) e Eggins (2004), dentre outros. O foco desta pesquisa são os mecanismos de Apreciação, um dos domínios avaliativos do subsistema de Atitude, que por sua vez, é parte integrante do Sistema de Avaliatividade, desenvolvido por Martin (2000), Martin e Rose (2003) e Martin e White (2005). Para análise das escolhas linguísticas feitas pelos alunos, utilizamos a ferramenta computacional WordSmith Tools 6.0 (SCOTT, 2010), cuja função Wordlist (lista de palavras) foi utilizada na busca pelos tipos de processos, assim como epítetos, entre outras marcas linguísticas mais recorrentes que caracterizassem suas percepções. Os resultados revelam que nas percepções dos alunos acerca de sua produção oral, ao longo das três fases da geração dos dados para a pesquisa, eles gradativamente deixaram de mencionar aspectos afetivos quanto ao desenvolvimento de sua produção oral e passaram a perceber aspectos mais estruturais de composição da língua
Resumo:
Este trabalho é uma discussão sobre as funções sociais da História e da Memória. Para tanto, foi pensado diante do 80º aniversário da Revolução de 1930, marco da (re)fundação da capital paraibana, pois esta memória e a produção historiográfica a respeito do tema nos é bastante instigante. Falar de João Pessoa, seja da cidade, seja do indivíduo; no que se refere aos episódios de 1930, é tocar em um assunto bastante passional, onde chegar a um consenso é algo extremamente improvável. O objetivo deste trabalho é problematizar as funções sociais da História e suas utilizações, notadamente por meio do nosso objeto de estudo, buscando contribuir para a compreensão de como a memória e a escrita da História são frutos do trabalho constante das sociedades que as engendram. Estudar sobre a produção da memória e da historiografia bem como a função da escrita da História sobre esses episódios, entendendo-os como espaços específicos de disputas, notadamente sobre os embates de memórias nos últimos dez anos, trazendo novas reflexões sobre as funções sociais destas memórias
Resumo:
Over exploitation of oil deposits on land onshore or offshore, there is simultaneous generation of waste water, known as produced water, which represents the largest waste stream in the production of crude oil. The relationship between the chemical composition of oil and water production and the conditions in which this process occurs or is favored are still poorly studied. The area chosen for the study has an important oil reserve and an important aquifer saturated with freshwater meteoric. The aim of this work is to study some chemical parameters in water produced for each reservoir zone of production in mature oil fields of Açu Formation, using the hydrochemical and statistical analysis to serve as a reference and be used as tools against the indicator ranges water producers in oil producing wells. Samples were collected from different wells in 6 different areas of production and were measured 50 parameters, which can be classified into three groups: anions, cations and physicochemical properties (considering only the parameters that generated values above detection limits in all samples). Through the characterization hydrochemistry observed an area of water and chlorinated sodium, chlorinated calcium or magnesium (mixed) in well water in different areas of Açu, by applying a statistical treatment, we obtained a discriminant function that distinguishes chemically production areas. Thus, it was possible to calculate the rate of correct classification of the function was 76.3%. To validate this model the accuracy rate was 86%
Resumo:
Most of the energy consumed worldwide comes from oil, coal and natural gas. These sources are limited and estimated to be exhausted in the future, therefore, the search for alternative sources of energy is paramount. Currently, there is considerable interest in making trade sustainable biodiesel, a fuel alternative to fossil fuels, due to its renewable nature and environmental benefits of its use in large scale. This trend has led the Brazilian government to establish a program (Probiodiesel) with the aim of introducing biodiesel into the national energy matrix, by addition of 5% biodiesel to conventional diesel in 2010 to foster not only the increase of renewable energy, but reduce imports of crude oil. This work evaluates different methods of extraction of oil Carthamus tinctorius L., their characterization by IR, 1H and 13C NMR, HPLC and TG and their use in the production of methyl ester (molar ratio of oil / alcohol 1:6, and NaOH catalyst). The physico-chemical parameters (acid value, density, viscosity, saponification index and surface tension) of oil and biodiesel were also described. The produced biodiesel had a yield of 93.65%, was characterized in relation to their physicochemical properties showing satisfactory results (density=875 kg/m3, viscosity = 6.22 mm2/s, AI = 0.01 mg (NaOH) /g) compared with the values established by the the National Agency Oil, Natural Gas and Biofuels
Resumo:
Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming
Resumo:
The current environmental crisis demands transformations in the relations among society, nature and development, considering sustainability. In this context, an important theme is replacing fossil fuels with biofuels, such as biodiesel. Moringa oleifera Lam. is a species that can be used as a raw material to produce biodiesel. Besides, it is a multiple purposes plant, which can be used also in water treatment. Thus, the aims of this work were to analyze the anatomical adaptations found in the stem and in the leaf and the seed s oil stores of M. oleifera., to investigate chemical characteristics of M. oleifera s seed oil, considering biodiesel production, and to evaluate the coagulation activity of these seeds in water treatment. Semipermanent histological laminas were made and it follows that the stem has thick cuticle, stomata whose cells guard are below the epidermis line, hollow medulla, druses and tector trichomes as adaptations to climate and soil conditions in which the species is found and the leaf is dorsiventral and it has thick cuticle, tector trichomes and druses. The seed has great reserves of oil. These features favor the use of Moringa oleifera Lam. as a raw material to produce biodiesel in Brazil s Northeast semiarid region. Chemical analysis were made through oil solvent extraction using mechanic stirrer. The oil was analyzed in UV spectrophotometer. A transesterification was made and biodiesel was analyzed in gas chromatography. Oil yield was high and good quality biodiesel was obtained. To evaluate seeds coagulantion activity, coagulation and flocculation essays in jartest were made, using seed extract to treat raw water. Seeds were efficient in cogulation process to treat water. So, they can be used in rudimentary systems or as a raw material to coagulant proteins extraction, as an alternative to traditional coagulants. M. oleifera has characteristics that favor its use to biodiesel production and water treatment
Resumo:
This present work has as its objective the analysis of transformations relating to the production processes in the Southern littoral urban space of the city of João Pessoa PB. The research estimated that the urban space is the product, means and condition of the society which produces it. The object-area of this inquiry is constituted of five districts: Altiplano Cabo Branco, Portal do Sol, Ponta do Seixas, Penha and Costa do Sol. The urban expansion which occurs in this area is characterized by the appearance of sufficient contradictory space phenomenona. On the other hand, the launching of real estate products such as the horizontal closed condominiums, directed towards the upper class, and the occurrence of areas of irregular occupation, inhabited by lower socioeconomic class and with a great lack of infrastructure and basic urban services, revealing the social contradictions. Due to this, processes such as auto-segregation and segregation imposed beyond the precarious and delinquent inclusion, has become the determining characteristic of this part of the city in analysis. The study also takes into account the appreciation of the new urban environmental zoning of Altiplano do Cabo Branco and from this moment on, start the discussion about the tendencies of urban expansion in this area, due to the interests and strategies of the real estate sector and the prominent role of the government in the current valorization process of urban soil of the area. The presence of residuals of agricultural businesses indicates a typical picture of the peri-urban areas configuring what we observe today at the Southern littoral of João Pessoa
Resumo:
Our study refers to the state of Rio Grande do Norte against the deployment of oil activity in their territory. In this sense the aim of this work was to analyze the presence of the loop space of the oil production system linked to objects and actions on the Rio Grande do Norte territory. From the so-called "oil shock", an event that caused global developments in several countries, Petróleo Brasileiro S/A (PETROBRAS) increased investments in drilling geological basins in Brazil. In the year 1973 was drilled in the sea area well which led to commercial production of oil and gas in Rio Grande do Norte. From that point on were added in some parts of the Potiguar territory, large systems of coupled objects to actions caused by several agents. In this context, geographic situations have been reorganized due to an unprecedented space circuit production accompanied by a new circle of cooperation. In the state happen all instances of the circuit: the production, distribution and consumption. In light of the theory of the geographical area seek to direct our thoughts to the operation of these bodies, and they are linked to material and immaterial flows multiscales. This perspective allows us to think the territory of Rio Grande do Norte entered into a new territorial division of labor characterized by specialization regional production. Oil activity was implemented in the territory of Rio Grande do Norte at a time marked by productive restructuring of various economic sectors. The oil sector has been acting increasingly linked the scientific and informational, with a view to increasing productivity. The presence of this circuit demanded the territory, specifically the Mossoró, an organizational structure that is different from the vast system nationally integrated private commercial corporations to small corporations, all of them relating directly or indirectly to PETROBRAS. The flows between companies whose headquarters are located in distant states and even countries have generated a continuous movement of goods, people, information and ideas, which is also causing new materialities in the territory
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico
Resumo:
Postgraduate studies in Psychology have passed through intense process of growth and consolidation, attested by current high levels of scientific production. It is questionable, however, the return that psychological science has given to a society that has made large investments. Considering the increasing integration of Psychology in the social welfare area, a form of possible and necessary contribution is by the expansion of social policy debate. This work aimed to discuss how Psychology postgraduate studies can contribute to understand the issue of social policy. The object were academic theses defended in the 2007/2009 triennium related to one of the five thematic criteria, which resulted in 105 theses of 824 defended in the period. The main results point to the existence of the issue in Psychology programs in a sprayed way, predominantly, albeit for a limited set of researchers and programs, "social policy" appears as a priority object of research, indicating incipient systematization of these studies. Moreover, it was found that while the majority of theses can be characterized by fragility of the theoretical frameworks in relation to the subject, with most research in a strictly technical perspective, some proportion of the studies reveals concern about putting the social policy debate into a broader social context, which represents the essential condition to construct a reasoned and robust theoretical critic. In conclusion, this thesis defends that psychological science can only contribute effectively to the society development if academic community promotes a structured articulation around the theme, deepens the theoretical debate and transforms the knowledge built into organized political practice