Reforma a vapor catalítica do metano: Otimização da produção e seletividade em hidrogênio por absorção in situ do CO2 produzido

Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming

Estudo de materiais mesoporosos funcionalizados com diferentes aminas para captura do dióxido de carbono através do processo de adsorção

Intensive use of machinery and engines burning fuel dumps into the atmosphere huge amounts of carbon dioxide (CO2), causing the intensification of the greenhouse effect. Climate changes that are occurring in the world are directly related to emissions of greenhouse gases, mainly CO2, gases, mainly due to the excessive use of fossil fuels. The search for new technologies to minimize the environmental impacts of this phenomenon has been investigated. Sequestration of CO2 is one of the alternatives that can help minimize greenhouse gas emissions. The CO2 can be captured by the post-combustion technology, by adsorption using adsorbents selective for this purpose. With this objective, were synthesized by hydrothermal method at 100 °C, the type mesoporous materials MCM - 41 and SBA-15. After the synthesis, the materials were submitted to a calcination step and subsequently functionalized with different amines (APTES, MEA, DEA and PEI) through reflux method. The samples functionalized with amines were tested for adsorption of CO2 in order to evaluate their adsorption capacities as well, were subjected to various analyzes of characterization in order to assess the efficiency of the method used for functionalization with amines. The physic-chemical techniques were used: X- ray diffraction (XRD), nitrogen adsorption and desorption (BET/BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), CNH Analysis, Thermogravimetry (TG/DTG) and photoelectron spectroscopy X-ray (XPS). The CO2 adsorption experiments were carried out under the following conditions: 100 mg of adsorbent, at 25 °C under a flow of 100 ml/min of CO2, atmospheric pressure and the adsorption variation in time 10-210 min. The X-ray diffraction with the transmission electron micrographs for the samples synthesized and functionalized, MCM-41 and SBA-15 showed characteristic peaks of hexagonal mesoporous structure formation, showing the structure thereof was obtained. The method used was efficient reflux according to XPS and elemental analysis, which showed the presence of amines in the starting materials. The functionalized SBA -15 samples were those that had potential as best adsorbent for CO2 capture when compared with samples of MCM-41, obtaining the maximum adsorption capacity for SBA-15-P sample

Síntese e caracterização de materiais mesoporosos para a captura de CO2: influência do óxido de níquel

Several materials are currently under study for the CO2 capture process, like the metal oxides and mixed metal oxides, zeolites, carbonaceous materials, metal-organic frameworks (MOF's) organosilica and modified silica surfaces. In this work, evaluated the adsorption capacity of CO2 in mesoporous materials of different structures, such as MCM-48 and SBA- 15 without impregnating and impregnated with nickel in the proportions 5 %, 10 % and 20 % (m/m), known as 5Ni-MCM-48, 10Ni-MCM-48, 20Ni-MCM-48 and 5Ni-SBA-15, 10NiSBA-15, 20Ni-SBA-15. The materials were characterized by means of X-ray diffraction (XRD), thermal analysis (TG and DTG), Fourier transform infrared spectroscopy (FT-IR), N2 adsorption and desorption (BET) and scanning electron microscopy (SEM) with EDS. The adsorption process was performed varying the pressure of 100 - 4000 kPa and keeping the temperature constant and equal to 298 K. At a pressure of 100 kPa, higher concentrations of adsorption occurred for the materials 5Ni-MCM-48 (0.795 mmol g-1 ) and SBA-15 (0.914 mmol g-1 ) is not impregnated, and at a pressure of 4000 kPa for MCM-48 materials (14.89 mmol g-1) and SBA-15 (9.97 mmol g-1) not impregnated. The results showed that the adsorption capacity varies positively with the specific area, however, has a direct dependency on the type and geometry of the porous structure of channels. The data were fitted using the Langmuir and Freundlich models and were evaluated thermodynamic parameters Gibbs free energy and entropy of the adsorption system

Síntese, caracterização e aplicação de MCM-41 funcionalizado com diisopropilamina no processo de adsorção do dióxido de carbono

Emissions of CO2 in the atmosphere have increased successively by various mechanisms caused by human action, especially as fossil fuel combustion and industrial chemical processes. This leads to the increase in average temperature in the atmosphere, which we call global warming. The search for new technologies to minimize environmental impacts arising from this phenomenon has been investigated. The capture of CO2 is one of the alternatives that can help reduce emis ions of greenhouse gases. The CO2 can be captured through the process of selective adsorption using adsorbents for this purpose. Were synthesized by hydrothermal method, materials of the type MCM-41 and Al-MCM-41 in the molar ratio Si / Al equal to 50. The synthesis of gels were prepared from a source of silicon, sodium, water and aluminum in the case of Al-MCM-41. The period of synthesis of the materials was 5 days in autoclave at 100°C. After that time materials were filtered, washed and dried in greenhouse at 100 º C for 4 hours and then calcined at 450 º C. Then the calcined material was functionalized with the Di-isopropylamine (DIPA) by the method of wet impregnation. We used 0.5 g of material mesopores to 3.5 mL of DIPA. The materials were functionalized in a closed container for 24 hours, and after this period were dried at brackground temperature for 2 hours. Were subsequently subjected to heat treatment at 250°C for 1 hour. These materials were used for the adsorption of CO2 and were characterized by XRD, FT-IR, BET / BJH, SEM, EDX and TG / DTG. Tests of adsorption of CO2 was carried out under the following conditions: 100 mg of adsorbent, temperature of 75°C under flow of 100 mL/min of CO2 for 2 hours. The desorption of CO2 was carried out by thermogravimetry from ambient temperature to 900ºC under flow of 25 mL min of He and a ratio of 10ºC/min. The difratogramas X-ray for the synthesized samples showed the characteristic peaks of MCM-41, showing that the structure of it was obtained. For samples functionalized there was a decrease of the intensities of these peaks, with a consequent reduction in the structural ordering of the material. However, the structure was preserved mesopores. The adsorption tests showed that the functionalized MCM-41 is presented as a material promising adsorbent, for CO2 capture, with a loss of mass on the desorption CO2 of 7,52%, while that in Al-MCM- 41 functionalized showed no such loss

Síntese e caracterização de carreadores de oxigênio para combustão com recirculação química obtidos via reação de combustão assistida por microondas

Perovskites oxides win importance by its properties and commercials applications, they have a high thermal stability, have conductive properties, electrical, catalytic, electro catalytic, optical and magnetic, and are thermally stable. Because of these properties, are being widely studied as carriers of oxygen in the process of power generation with CO2 capture. In this work, the base carrier system La1-xMexNiO3 (Me = Ca and Sr) were synthesized by the method via the combustion reaction assisted by microwave. were synthesized from the combustion reaction method by microwave process. This method control the synthesi`s conditions to obtain materials with specific characteristics. The carriers calcined at 800 ° C/2h were analyzed by thermal analysis (TG-DTA), to verify its thermal stability, X-ray diffraction (XRD) to verify the phase formation, with subsequent refinement by the Rietveld method, to quantify the percentage of phases formed, the surface area by BET method was determined, scanning electron microscopy (SEM) was obtained to evaluate the material morphology and temperature programmed reduction (TPR) was done to observe the metallic phase of the nickel. After all proposed characterization and analysis of their results can be inferred to these oxides, key features so that they can be applied as carriers for combustion reactions in chemical cycles. The final products showed perovskite-type structures K2NiF4 (main) and ABO3.

Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Políticas Culturais e Gestão Cultural: a Secretaria Municipal da Cultura e do Turismo SEMUC (2005-2010) de Limoeiro do Norte-CE

The study analyzed regarding cultural policies developed in the city of North-EC Limoeiro by the Municipal Culture and Tourism (Semuc) in the period between the years 2005 and 2010. Period that marks the resumption of the figure of the State Ministry of Culture (MinC) as a major factor in formulating and implementing public policies in the area of culture in the country, especially with the creation of the National Culture System (CNS) and the preparation of National Culture Plan (NCP). The work was through research documents (laws) about what had legislated on culture in the city, the reports of consultation activities undertaken by Semuc and interviews with former managers, a former - employee and the Secretary of that folder. Thus, given the contemporary context where the culture is replaced by increasing visibility, the analysis undertaken on policies developed by cultural Semuc revealed the most diverse forms of action: investment in events (capture and promotion), the institution permanent cultural policies, cultural background, the appreciation of local culture, and specific actions

Alguns aspectos sobre o processo da democratização dos sistemas políticos no mundo árabe :Egito e Líbano como modelos de estudo

The World has tried diverse democratic waves at distinct moments. Some nations have adopted the idea of the democracy for years; others have not yet and other ones are still in a slow process of transition. The field of studies on the Arabian political systems has testified since the last quarter of 20th century a notorious development. This advance disclosed in the existence of a set of trends that has turned around a number of concepts and main theoretical frames such as the political pluralism and the democratic transition and the civil society and its relation with the State. The speech on the process of democratic transition consists in part in the capture and the analysis of the role of the forces and the organizations of the civil society in this process. The peculiarities of the Arab World excite questions concerning the establishment of one governmental system in this universe in the mold of that one that develops with hegemony in the Occident, which has become an interesting field of inquiries for the Political Science. This study comprises the analysis of some aspects of the political situation in the Arab World towards the process of democratization in which Egypt and Lebanon are models of study. Thus the theoretical basis of the term democracy is introduced, presenting different considerations about this expression, since the sprouting of the term until its current conception; later the civil society is analyzed as well as the systems of the political parties and the electoral systems of both countries in attempt to identify the level of democratization existing there and also to find the possible ways to magnify the democratic horizons

O brincar e a criança com deficiência física na educação infantil : o que pensam as crianças e suas professoras

The present study had the purpose of examining the disabled children s way of playing on everyday situations in the CMEIs (acronym in Portuguese for City s Early Childhood Education Center ) of Natal/RN, by watching and listening to three children and their teachers, trying to understand how the games existent in these contexts involve the different subjects of the learning process, and which contributions emerge for a valuable pedagogic work, capable of providing the children s inclusion in the Early Childhood Education. This qualitative investigation was built as a case study, collecting data through watching and interviews. Throughout the observations, it was indispensable to look into the different contexts of the school routine, to capture and analyze events that could answer to what was being studied. The accessibility conditions of the school spaces were also observed. The interviews made possible to extract from the subjects what they think and how they perceive themselves when playing. The acquired data were analyzed having as counterparts contemporary studies and theories about playing, childhood and school inclusion, and published documents from the Education and Culture Department that treat of this theme as the guiding axis of the pedagogic proposes aimed to the Early Childhood Education. The revelations of the research show that is necessary to put effort on the disabled children s playing inside the context of the Early Childhood Education, regarding the accomplishment of accessibility laws that treat of school spaces and providing of equipment and resources that respect those children s characteristics, as well as providing opportunities for initial and continued training for the teachers, under the perspective of inclusive education and playing

Trajetória de profissionais da saúde de um hospital colônia para hanseníase

Leprosy as a public health problem , there is still quite some time , even with treatment for decades . Your health-disease process is marked by a historical backdrop of stigma , prejudice, social exclusion and authoritarian decisionducts , in order to extinguish the disease milieu under the regime of compulsory confinement of the patient. In this perspective , the Brazilian public health twentieth century adopted policies of compulsory isolation , which meant that those who receive a diagnosis of leprosy were isolated from society and their families in hospitals colonies . Objective is, to the study, rescue the trajectory of health professionals in the Colony Hospital St. Francis of Assisi , in Natal / RN ; Identify the policy was perceived as compulsory institutionalization imposed for leprosy patients by health professionals ; describe the behaviors Professional Hospital adopted in Cologne ; Retrieve information about the existence and functioning of the Hospital and Create a documentary of historical fragments of leprosy from the point of view of professionals from a former colony. Exploratory - descriptive method with a qualitative approach , using the methodological framework thematic oral history was used . Obtained approval by the IRB of the Federal University of Rio Grande do Norte, under Protocol No 461 403 and CAAE 19476913.9.0000.5537 . Be interviewed during the period of November and December 2013 , five health professionals who worked in the hospital colony , using audio recorder and images to capture and record the statements. The interviews were transcribed , textualized, transcriadas and sent to reviewers to step conference of the reports. Subsequently , analysis of the stories was made from the proposed content analysis of Bardin . The results and discussion are presented in the form of article: Opinion of nursing professionals who worked in a hospital for leprosy colony , which aimed to : identify the opinion of nurses who worked in hospital colony on the lives of patients . In this article, three main themes were highlighted and discussed from the reports of colaboradoes : I - The socialization process of internal II - 16 Prejudice , stigma and discrimination III - Social exclusion versus inclusion . We conclude that , in the context of the colony hospital, the performance of health professionals contributed significantly to that stigma , prejudice and social exclusion would be minimized and that the experience of asylum seekers in the colony were not seen more traumatic

Gestão do Conhecimento e o uso estratégico de Tecnologias de Informação: um estudo em Redes de Franquias no Estado do Rio Grande do Norte

This study discusses the use of information technologies for knowledge management in networks of franchises in the Rio Grande do Norte/Brazil, whose management and operation are complex activities, characterized by the geographic spread of their network unities, creating barriers to communication and information sharing between franchisors, franchisees and final customers. In view of this, the following hypotheses were formulated: the knowledge management can be a positive alternative for improving communication between units; and information technology can eliminate many problems related mainly to capture and share knowledge. In general, it aims to investigate, in qualitative and quantitative aspects, how information technology can support knowledge management in networks of franchises. Specifically purposes to register the existence of managerial practices related to knowledge management in enterprises at the franchising sector; to verify whether they have the technological resources with the potential to facilitate the sharing of information; to identify what are the technologies of information and communication used in the organizational environment; and suggest measures that will facilitate the process of organizational learning, using information technology and communication as tools. It concludes that knowledge management becomes a positive alternative, especially in strengthening of bonds of communication and sharing of knowledge between the franchises. In this regard, information technology must provide all the services of the corporation to facilitate communication between franchisor and franchisee, through a single and integrated system. However, they still show unsuitable for more sophisticated technology platforms

Influência da formação de pozolanas com adição de metacaulim em concreto de alta resistência

The need to build durable structures and resistant to harsh environments enabled the development of high strength concrete, these activities generate a high cement consumption, which implies factor in CO2 emissions. Often the desired strength is not achieved using only the cement composition. This study aims to evaluate the influence of pozzolans with the addition of metakaolin on the physical mechanics of high strength concrete comparing them with the standard formulation. Assays were performed to characterize the aggregates according to NBR 7211, evaluation of cement and coarse aggregate through the trials of petrography (NBR 15577-3/08) and alkali-aggregate reaction (NBR 15577-05/08). Specimens were fabricated according to NBR 5738-1/04 with additions of 0%, 4%, 6%, 8% and 10% of metakaolin for cement mortars CP V in the formulations. For evaluation of the concrete hardened in fresh state and scattering assays were performed and compressive strength in accordance with the NBR 7223/1992 and NBR 5739-8/94 respectively. The results of the characterization of aggregates showed good characteristics regarding size analysis and petrography, as well as potentially innocuous as the alkali-aggregate reaction. As to the test of resistance to compression, all the formulations with the addition of metakaolin showed higher value at 28 days of disruption compared with the standard formulation. These results present an alternative to reduce CO2 emissions, and improvements in the quality and durability of concrete, because the fine particle size of metakaolin provides an optimal compression of the mass directly influencing the strength and rheology of the dough

Concepção e estudo de um biofiltro para tratamento de compostos orgânicos voláteis COVs

In the last decade, biological purification of gaseous waste has become an important alternative to many conventional methods of exhaust air treatment. More recently, biofiltration has proved to be an effective and inexpensive method for the treatment of air contaminated with volatile organic compounds (VOCs). A biofilter consists in a reactor packed with a porous solid bed material, where the microorganisms are fixed. During the biofiltration process, polluted air is transported through the biofilter medium where the contaminant is degraded. Within the biofilm, the pollutants in the waste gases are energy and carbon sources for microbial metabolism and are transformed into CO2, water and biomass. The bed material should be characterized by satisfactory mechanical and physical properties as structure, void fraction, specific area and flow resistance. The aim of this research was the biofilter construction and study of the biological degradation of ethanol and toluene, as well as the modeling of the process. Luffa cylindrica is a brazilian fiber that was used as the filtering material of the present work. The parameters and conditions studied were: composition of nutrients solution; effect of microflorae strains, namely Pseudomanas putida and Rhodococcus rhodochrous; waste gas composition; air flow rate; and inlet load of VOCs. The biofilter operated in diffusion regime and the best results for remotion capacity were obtained when a microorganisms consortion of Pseudomanas putida and Rhodococcus rhodochrous,were used, with a gas flow rate of 1 m3.h-1 and molar ratio nitrogene/phosphore N/P=2 in the nutrients solution. The maximum remotion capacity for ethanol was around 90 g.m-3.h-1 and 50 g.m-3.h-1 to toluene. It was proved that toluene has inhibitory effect on the ethanol remotion When the two VOCs were present in the same waste gas, there was a decrease of 40% in ethanol remotion capacity. Luffa cylindrica does not present considerable pressure drop. Ottengraf and van Lith models were used to represent the results obtained for ethanol and toluene, respectively. The application of the transient model indicated a satisfactory approximation between the experimental results obtained for ethanol and toluene vapors biofiltration and the ones predicted it

Contribuições de uma unidade de ensino potencialmente significativa UEPS para o ensino de ecologia em escola pública da educação básica

The research aims to evaluate the contributions of a teaching unit to enhance the learning contents ecological green areas in elementary school. The work was conducted with elementary students in a public school in Natal-RN. We sought to identify the students´ previous knowledge about the contents of ecology, develop and implement a Potentially Meaningful Teaching Units PMTU; assess learning of ecological concepts in Teaching Unit Potentially Significant; assess the contribution of interpretative trail as strategy teaching to learning content ecology. The survey of students´ previous knowledge through the pre-test was essential to identify the appropriate subsumers and partially correct, since they served as "anchor" for further expansion of scientific concepts contained in this research. The green areas of the school as an educational, contributed the motivational aspect, as students were protagonists throughout the entire process of teaching and learning. The method of stimulated memory was effective to evidence learning ecological concepts in interpretive trails. The use of diverse activities organized on a PMTU promoted intellectual autonomy of the students and facilitated the acquisition of new meanings through progressive differentiation, and integrative reconciliation consolidation of ecological content and concepts related to biotic and abiotic factors on the basis of the central ideas thematic Life and Environment. The development of procedural skills to capture and share meanings, observe, collect and record data, hypotheses, ability to explain, to apply knowledge to solve problem situations, argue, identify, compare, differentiate and relate concepts, negotiate meanings, reflecting Critically, systematize data was evidenced. Collaborative activities promoted the incorporation of attitudinal contents as developing respect for differences, learn to work in teams to plan, develop and implement actions together for citizenship and environmental responsibility. The application of the Potentially Meaningful Teaching Units PMTU showed evidence of Critical meaningful learning ecological concepts covered in elementary school.