94 resultados para Circuitos eletrônicos
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results
Resumo:
This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness
Resumo:
This work proposes a new methodology to verify those analog circuits, providing an automated tools to help the verifiers to have a more truthful result. This work presents the development of new methodology for analog circuits verification. The main goal is to provide a more automated verification process to certify analog circuits functional behavior. The proposed methodology is based on the golden model technique. A verification environment based on this methodology was built and results of a study case based on the validation of an operational amplifier design are offered as a confirmation of its effectiveness. The results had shown that the verification process was more truthful because of the automation provided by the tool developed
Resumo:
The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.
Resumo:
Massively Multiplayer Online Role-Playing Games (MMORPGs) are role-playing games that, through the Internet, can integrate thousands of players interacting at the same time in at least one virtual world. This way, these games can provide, further than fun, a greater familiarity with the additional language and opportunity to improve the linguistic proficiency in a real context. Hence, what is proposed in this study is extended knowledge about the learning of an additional language mediated by MMORPGs for teachers to know how, if relevant, to present, use or encourage this practice to their students. Based on this major purpose, we seek to answer the following research questions: (a) what distinguishes the learning profile of the gamers and non-gamers; (b) if MMORPGs can, through a hybrid and systematic approach, assist the development of proficiency of the additional language and (c) what the think-aloud protocols show about the learning mediated by the MMORPG Allods Online. Following an experimental method (NUNAN, 1997), 16 students of the curricular component Reading and Writing Practices in English Language have comprised the control group and 17 students of the same class formed the experimental group and were submitted to a pre and post-test adapted from the Key English Test (KET) by the Cambridge University (2008). The tests were conducted before and after a period of 5 weeks of 3 hours of practice with Allods Online a week (experimental group), and classes of the curricular component (both groups). A quantitative analysis of the questionnaires about the exposure to English profiles of the participants, a quantitative analysis of the tests scores and a qualitative analysis of the thinkaloud protocols collected during the experiment were conducted based on the theories of (a) motivation (GARDNER, 1985, WILLIAMS & BURDEN, 1997, BROWN, 2007, HERCULANO-HOUZEL, 2005); (b) active learning (GASS, 1997, GEE, 2008, MATTAR, 2010); (c) interaction and collaborative learning (KRASHEN, 1991, GASS, 1997, VYGOTSKY, 1978); (d) situated learning (DAMASIO, 1994; 1999; 2003, BROWN, 2007, GEE, 2003) and (e), tangential learning (PORTNOW, 2008; MATTAR, 2010). The results indicate that the participants of the experimental group (gamers) seem to be more engaged in tangential English learning activities, such as playing games, listening to music in English, communicating with foreigners and reading in English. We also deduced that the period of experiment possibly generated positive results on the gamers proficiency scores, mainly in the parts related to orthographic development, reading and comprehension, writing with focus on content and orthographic accuracy. Lastly, the think-aloud protocols presented evidences that the gamers have engaged in active English language learning, they have interacted in English with other players, and learned linguistic aspects through the experience with the MMORPG Allods Online
Resumo:
The concern about a good physical condition is heavily present nowadays, in documentary films about health and in the media, and it is also expressed through the outstanding growth of physical academies, beauty institutes and aesthetic medicine and all kind of aesthetic surgeries. In the western world the body wave is a significant trend, characterized by the great investments in body image. However, what is overlooked is the fact that in parallel trend grows the number of teenagers, especially females, with all kind of problems related to their body image. As adolescence is a moment of transformations, teenagers tend to be more aware of their body image and often neglect food ingestion and try to build their bodies following the images they have from top models and movie stars. The low self-esteem accompanying this sort of experience is an additional problem. Therefore the research aim to analyze discourses regarding the body image produced in world wide web diaries (blogs). The blogs selection was made through the site www.blogs.com.br, which is considered the widest guide of electronic diaries in Brazil. We looked after blogs including the keyword body and from adolescents aged 10 to 19, who showed concern about a slim body. Three blogs were chosen, considering the example criteria. Discourse analysis shows that these teenagers feel unsatisfied with their bodies, searching by all means the thinness presented as a aesthetic paradigm in western societies which often implies neglecting their own health, using appetite inhibitor drugs, restricting or totally abstaining food ingestion for long periods of time, or provoking themselves vomits after ingesting food. These behaviors, together with intense fear of gaining weight, can be characterized as alimentary disorders, related to the body image. As they usually hide this sort of behaviors from family and friends who do not share this concern, the blogs seem to be an easy tool for adolescents to find peers with whom to share common values and ideas and reaffirm their identities and virtual sense of community
Resumo:
The aim of this work was the preparation of polyols from reactions between castor oil and dietanolamine to increase the hydroxyl content and the network degree in the products to application in electronic devices. The polyols and the mixtures obtained were characterized by nuclear magnetic ressonance. Castor oil (CO) is a natural triglyceride - based polyol possessing hydroxyl groups, which allow several reactions that produce many different products. Among them are the polyurethanes (PU), which have been considered an ideal product for the covering of electricelectronic circuits, due to their excellent electrical, shock-absorbing, solvents resistance and hydrolytic stability properties. About 90% of the fatty acids present in the castor oil are ricinoleic acid (12-hydroxyoleic acid), while the remaining 10% correspond to non-hydroxylated fatty acids, mainly linoleic and oleic acids. The chemical analysis of castor oil indicates a hydroxyl number of 2.7. In this work, a polyol was obtained by the reaction of the CO with diethanolamine (DEA), in order to elevate the hydroxyl value from 160 to 230 or to 280 mgKOH/g, and characterized by nuclear magnetic resonance (NMR) 1H and 13C (Mercury 200). The polyadition of the resulting polyol with isophorone diisocianate (IPDI) was carried out at 60°C, and the reaction kinetics was followed by rheological measurements in a Haake RS150 rheometer. The electrical properties were determined in a HP LCR Meter 4262A, at 1.0 Hz and 10.0 KHz. The chemical analysis showed that the polyols obtained presented hydroxyl number from 230 to 280 mgKOH/g. The polyadition reaction with IPDI produced polyurethane resins with the following properties: hardness in the range from 45 shore A to 65 shore D (ASTM D2240); a dielectric constant of 3.0, at 25°C (ASTM D150). Those results indicate that the obtained resins present compatible properties to the similar products of fossil origin, which are used nowadays for covering electric-electronic circuits. Therefore, the PUs from castor oil can be considered as alternative materials of renewable source, free from the highly harmful petroleum - derived solvents
Resumo:
Cette étude a été fondée sur la reconaissance, la description et l'analyse du circuit spatial de la production de l activité des fabriques des casquettes dans la région du Seridó Potiguar. L activité des fabriques des casquettes est située dans les villes de Caicó, Serra Negra do Norte e São José do Seridó, qui forment le pôle de fabriques de casquettes, composé de soixante-quatre (64) unités de fabrication, le deuxième plus grand producteur de casquettes au Brésil. Dans la condition de base géographique, l'opérationnalisation du concept de circuits spatiales de la production a été essentielle à la compréhension de l'utilisation du territoire et de l'indivisibilité de l'espace, du fournisseur de matières premières au consommateur final, comprenant les étapes des matières premières, la main-d'oeuvre, le stockage, les transports, le commerce et la consommation dans la période actuelle, dans laquelle les instances de la production, la circulation, la distribution et de la consommation sont spatialement diffus. Sur la base de l'identification et de la localisation de ces étapes et des principaux acteurs impliqués dans la activité des fabriques de casquettes, une configuration de circuit spatial de la production a été élaborée, en s'interprétant l'utilisation des territoires par les instances productives. L'interprétation des étapes de production a identifié que les entreprises liées à l'Association Seridoense des Fabricants de Casquettes agissent plus efficacement sur le territoire que celles nonassociées, alors que toujours elles investissent dans des nouveaux équipements, en augmentant sa puissance technique pour se renforcer avant un marché si compétitif comme celui des casquettes. En examinant la contribution de la fabrication des casquettes à l'utilisation actuelle des territoires de la coupe, nous avons appris que les activités complémentaires et des matières premiéres nécessaires à sa réalisation se trouvent dans leur environnement géographique. Ainsi, la proximité spatiale entre les étapes de la fabrication des casquettes fait entrevoir la matérialité du territoire, conférée dans la coexistence des techniques passées et présentes, et l'ensemble des actions effectuées par un certain nombre de travailleurs sociaux qui collaborent à la création du circuit spatial de la production de l activité des fabriques des casquettes. Cette étude a confirmé que les fabriques des casquettes sont organisées sous la forme de cellules de production, continues ou discontinues, dont les équipements et les machines à coudre industrielles obéissent à la logique d'une production de plus en plus standardisée. Ce circuit spatial de la production contribue à l'utilisation actuelle des territoires de Caicó, Serra Negra do Norte et de São José do Seridó car il amplifie le mouvement du commerce et des relations entre les lieux, à travers la dynamique des flux des personnes, des biens et des produits, en constante circulation, guidées par la division du travail entre les étapes productives
Resumo:
The Feira da Pedra is an extension of the open fair of São Bento in the State of Paraiba. It is a system of trade in textile goods produced by textile industry in manufacturing of hammocks and derivatives of this industry, present in some cities in the state of Paraiba and Rio Grande do Norte, as a survival strategy, inserted in the list of tertiary and retail of the urban economics of this city. It is thereby aimed to discuss about the urban economics, reflecting on the open fair system from the two circuits of urban economy, mainly in the context of the dynamics of the current period of geographic space, the technical-scientific-informational period, as the specific empirical object, the Feira da Pedra of São Bento (PB). For this, this research was carried out in two stages of operation: a) surveys of secondary data and b) primary data collection which were reported an operational triad: I) literature; II) documentary research, and III) research of field. The presence of the Feira da Pedra in São Bento has shown us one of the most important characteristics of this city, in order to present major economic, social and cultural benefits to the local population, and contribute to (re) production of sertanejo space, making lower part of the circuit of its urban economy. This activity has entailed several dynamics for urban space in this city, mainly because of attracting large numbers of people, carrying typical actions of its relationship with the urban space are são-bentense and built environment. Thus, its importance is not only a local and regional phenomenon, but also a cultural reference of a place in the geographical area of many paraibanos and norte-rio-grandenses subjects, as the case of this activity has brought to its weekly routine, this product resulting from the textile working of this area of Sertão Paraibano and Seridó Potiguar
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
The present study aims to analyze the spatial organization of the Ribeira district in Natal/ RN from the two circuits of the urban economy. For its realization, was used the bibliographical, documentary and field research. From the information collected in the field research and of secondary data was elaborated the maps, tables, graphics, frames and photographic collections. In the analysis of the results identified the presence of two circuits of the urban economy in the said neighborhood, thus as the predominance of the upper circuit compared to the lower circuit between the surveyed establishments, well as the role that each of the circuits represents to their spatial organization. Some variables such as technology, organization, information, publicity and consumption were important to establish the main differences between the circuits.
Resumo:
This study discusses the issue of deadlines in the purchasing process within the Federal Public Administration. Your main goal is to analyze the main factors that influenced, mainly in the implementation of sub-phases of electronic trading in BANT, in 2014, as service to the principle of celerity. The research is descriptive since they were identified and analyzed the factors that influenced in terms of purchases, through direct observation and interviews. Based on the theoretical framework, the purchasing function, four dimensions of analysis were established: "Legislation and procurement processes", "Structure and Organization of the purchasing department", "purchasing systems" and "Human Resources of the purchasing department." Analysis showed that, unlike what happens in the private sector, the public procurement sector has not reached a strategic status within organizations, which brings harmful consequences to the speed of the purchases. It was found that there is a need for greater involvement of the purchasing department staff and criers in the formulation of the organization's purchasing strategies and that these purchases elements present, about their attitudes, a hybrid profile, proactive regarding specifications of the items, but reactive in relation to the need to urgently purchase, due to the lack of a better plan, which overloads the work of the sector. The observation of these strategic aspects of the procurement function in BANT influenced the finding that the lack of staff and expertise in investments plus the lack of rigor and formality of legislation, among other factors, contributed mainly to the lack of speed of processes.
Resumo:
MEDEIROS, Rildeci; MELO, Erica S. F.; NASCIMENTO, M. S. Hemeroteca digital temática: socialização da informação em cinema.In:SEMINÁRIO NACIONAL DE BIBLIOTECAS UNIVERSITÁRIAS,15.,2008,São Paulo. Anais eletrônicos... São Paulo:CRUESP,2008. Disponível em: http://www.sbu.unicamp.br/snbu2008/anais/site/pdfs/3018.pdf
Resumo:
REGIS, Josiana Florencio Vieira ; CAMPOS, Ana Celia Cavalcanti Fernandes. A gestão do conhecimento e a inovaçao tecnológica como insumo básico para a vantagem competitiva das empresas. In: CONGRESSO BRASILEIRO DE GESTÃO DO CONHECIMENTO, 8., 2009, Sao Paulo. Anais eletrônicos... Sao Paulo: SBGC, 2009. Trabalho oral.
Resumo:
BEZERRA, Gesiane Ferreira; CÂMARA, Rafael Silva da; SANTOS, Valdete Honorato dos et al. As bibliotecas escolares digitais contituídas através de uma rede de conhecimento digital. In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIENCIAS SOCIAIS APLICADAS, 16, 2010. Natal. Anais eletrônicos... Natal: SEMINÁRIO CCSA, 2010. Trabalho oral. Disponível em: