Análise por meio de espectroscopia de emissão óptica das espécies ativas em nitretação iônica e gaiola catódica

Plasma process like ionic nitriding and cathodic cage plasma nitriding are utilized in order to become hard surface of steels. The ionic nitriding is already accepted in the industry while cathodic cage plasma nitriding process is in industrial implementation stage. Those process depend of plasma parameters like electronic and ionic temperature (Te, Ti), species density (ne, ni) and of distribution function of these species. In the present work, the plasma used to those two processes has been observed through Optical Emission Spectroscopy OES technique in order to identify presents species in the treatment ambient and relatively quantify them. So plasma of typical mixtures like N2 H2 has been monitored through in order to study evolution of those species during the process. Moreover, it has been realized a systematic study about leaks, also thought OES, that accomplish the evolution of contaminant species arising because there is flux of atmosphere to inside nitriding chamber and in what conditions the species are sufficiently reduced. Finally, to describe the physic mechanism that acts on both coating techniques ionic nitriding and cathodic cage plasma nitriding

Tributação, finanças públicas e política fiscal: uma análise sob a óptica do direito e economia

In the Brazilian legal scenario, the study of taxation has traditionally been restricted to positivist analysis, concerned with investigating the formal aspects of the tax legal rule. Despite its relevance to the formation of the national doctrine of tax, such formalist tradition limits the discipline, separating it from reality and the socioeconomic context in which the Tax Law is inserted. Thus, the proposal of the dissertation is to examine the fundamentals and nature of taxation and tax legal rules from the perspective of Law and Economics (Economic Analysis of Law). For this purpose, the work initially reconnects the Tax Law and Science of Finance (or Public Finance) and Fiscal Policy, undertaking not only a legal analysis, but also economic and financial analysis of the theme. The Economics of Public Sector (or Modern Public Finance) will contribute to the research through topics such as market failures and economic theory of taxation, which are essential to an economic approach to Tax Law. The core of the work lies in the application of Law and Economics instruments in the study of taxation, analyzing the effects of tax rules on the economic system. Accordingly, the dissertation examines the fundamental assumptions that make up the Economic Analysis of Law (as the concept of economic efficiency and its relation to equity), relating them to the tax phenomenon. Due to the nature of the Brazilian legal system, any worth investigation or approach, including Law and Economics, could not pass off the Constitution. Thus, the constitutional rules will serve as a limit and a prerequisite for the application of Law and Economics on taxation, particularly the rules related to property rights, freedom, equality and legal certainty. The relationship between taxation and market failures receives prominent role, particularly due to its importance to the Law and Economics, as well as to the role that taxation plays in the correction of these failures. In addition to performing a review of taxation under the approach of Economic Analysis of Law, the research also investigates the reality of Brazilian tax system, applying the concepts developed in relevant cases and issues to the national scene, such as the relationship between taxation and development, the compliance costs of taxation, the tax evasion and the tax enforcement procedure. Given the above, it is intended to lay the groundwork for a general theory of Economic Analysis of Tax Law, contextualizing it with the Brazilian tax system

Geometrizando no segundo ciclo :relato de uma intervenção pedagógica voltada à construção de conceitos geométricos no ensino fundamental

This work has proposed to relate the experience product of a pedagogical intervention, performed in a public institution of teaching situated in this capital. It had as objective to validade the applying of a teaching module of geometry, more specifically about the conceptions of perimeter and área in the second cycle of fundamental teaching. This dissertation has presented the problematic which involves the teaching of geometry in different contexts. It has adopted the broach of the radical constructivism while methodological theoretical referencial through which it has tried to explain the phenomena that involves the teaching and the apprenticeship. It appropriates Jean s Piaget contributions related to the development stages, while referencial that will dialogue in the search by sense and comprehension of the geometric apprenticeship process and it runs over Richard s Skemp (1980) theory in order to explicit the student s apprenticeship according to the levels of instrumental comprehesion and relacional comprehension . The research has presented datum related to initial diagnosis evaluantion, the pedagogical intervention and analysis of the activities and students perfomance displaying still the results of the final evaluation. According to the results got, we could check the students group growth front to the acquisition of the concepts of perimeter and área in comparison with the previous knowledges presented in the initial diagnosis evoluation of the students participants of the research. We have concluded evaluating the objectives of the research, connecting the strategies and reasoning employed by the students in order to resolve the questions and then to reach the objectives proposed by the teaching module. We have presented still the main obstacles to the apprenticeship of such concepts

Reconceitualização das categorias de skemp de compreensão relacional e compreensão instrumental como critérios globais

The thesis presents a systematic description about the meaning, as Skemp, relational understanding and understanding instrumental, in the context of mathematics learning, being that we had as a guide his understanding of the schema. Especially, we analyze some academic productions, in the area of Mathematics Education, who used the categories of understanding relational and instrumental understanding how evaluative instrument and we see that in most cases the analysis is punctual. Being so, whereas the inherent understanding relational schema has a network of connected ideas and non-insulated, we investigated if the global analysis, where it is the understanding of the diversity of contributory concepts for formation of the concept to be learned, is more appropriate than the punctual, where does the understanding of concepts so isolated. For this, we apply a teaching module, having as main content the Quaternos Pythagoreans using History of Mathematics and the work of Bahier (1916). With the data we obtained the teaching module to use the global analysis and the punctual analysis, using research methodology the Case Study, and consequently we conduct our inferences about the levels of understanding of the subject which has made it possible for us to investigate the ownership of global analysis at the expense of punctual analysis. On the opportunity, we prove the thesis that we espouse in the course of the study and, in addition, we highlight as a contribution of our research evidence of need for a teaching of mathematics that entices the relational understanding and that evaluation should be global, being necessary to consider the notion of schema and therefore know the schematic diagram of the concept that will be evaluated

Equalização neural aplicada a sistemas com modulação bidimensional em fibra óptica

Nowadays, optic fiber is one of the most used communication methods, mainly due to the fact that the data transmission rates of those systems exceed all of the other means of digital communication. Despite the great advantage, there are problems that prevent full utilization of the optical channel: by increasing the transmission speed and the distances involved, the data is subjected to non-linear inter symbolic interference caused by the dispersion phenomena in the fiber. Adaptive equalizers can be used to solve this problem, they compensate non-ideal responses of the channel in order to restore the signal that was transmitted. This work proposes an equalizer based on artificial neural networks and evaluates its performance in optical communication systems. The proposal is validated through a simulated optic channel and the comparison with other adaptive equalization techniques

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Compósito Polimérico Híbrido: Comportamento Mecãnico, Descotinuidade Geométrica e Resistência Residual

The growing demand in the use of hybrid composite materials makes it essential a better understanding of their behavior face of various design conditions, such as the presence of geometric discontinuities in the cross section of structural elements. This way, the purpose of this dissertation is a study of the mechanical response (strength and stiffness), modes (characteristics) of fracture and Residual Strength of an hybrid polymeric composite with and without a geometric discontinuity in its longitudinal section (with a reduction in the cross section) loaded by uniaxial tension. This geometric discontinuity is characterized by central holes of different diameters. The hybrid composite was fabricated as laminate (plate) and consisting of ortho-tereftalic polyester matrix reinforced by 04 outer layers of Jute fibers bidirectional fabrics and 01 central layer of E-glass bidirectional fabric. The laminate was industrially manufactured (Tecniplas Nordeste Indústria e Comércio Ltda.), obtained by the hand lay-up technique. Initially, a study of the volumetric density of the laminate was made in order to verify its use in lightweight structures. Also were performed comparative studies on the mechanical properties and fracture modes under the conditions of the specimens without the central hole and with the different holes. For evaluating the possible influence of the holes in the structural stability of the laminate, the Residual Strength of the composite was determined for each case of variation in hole diameter. As a complementary study, analyses of the macroscopic final fracture characteristic of the laminates were developed. The presence of the central hole of any sizes, negatively changed the ultimate tensile strength. Regarding the elastic modulus, moreover, the difference found between the specimens was within the range of tests displacement, showing the laminate stability related to the stiffness

Diagnóstico de descarga de cátodo oco de ar e pós-descarga Ar N2 por espectroscopia de emissão óptica e espectrometria de massa

Many applications require that the plasma discharge is produced apart from the surface to be processed, thus preventing damage caused by bombardment and/or plasma radiation. In the post-discharge regime in various applications thermally sensitive materials can be used. In this work, active species produced by discharge and post-discharge hollow cathode were diagnosed by optical emission spectroscopy and mass spectrometry. The discharge was produced with the gases Ar and Ar - N2 gas flow ranging from 1 to 6 cm3/min and electric current between 150 to 600 mA. It was estimated that the ion density inside the hollow cathode, with 2 mm diameter ranged between 7.71 and 14.1 x 1015 cm-3. It was observed that the gas flow and the electric current changes the emission intensity of Ar and N2 species. The major ionic species detected by quadrupole mass spectrometry were Ar+ and N2+. The ratio of optical emission intensities of N2(1 +)/Ar(811 nm) was related to the partial pressure of N2 after the hollow cathode discharge at low pressure

História da ciência como estratégia didática no ensino médio: um breve olhar de conteúdos da óptica

From a critique of aspects of the current teaching of physics, we propose in this paper an investigation into the conceptions of Nature of Science (NOS) submitted by students from the high school level, as well as the inclusion of discussions about some elements of NOS, through the History and Philosophy of Science, understanding them as facilitating strategy for more effective learning of Physics and, more specifically, the contents of optics. Based on the historical period corresponding to Greek antiquity to the mid-nineteenth century, built and applied a teaching unit to a high school class at the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) Ipanguaçu campus. Our teaching unit involved the reading and interpretation of texts with historical content, observation and assembling five experimental activities, among other activities. Data analysis occurred through questionnaires investigative applied before and after the completion of the teaching unit, as well as questionnaires for content present in the texts. Although not significant, the results indicated that the application of the teaching unit allowed the (re) construction of some conceptions about NOS targets students present in our work, and contribute to a better learning content and greater optical science approach and its nature

O ensino de óptica no nível fundamental: uma proposta de ensino aprendizagem contextualizada para a oitava série

This dissertation presents the investigation and possible interference in the current teaching of physics, specially of optics, in the eighth grade/ ninth year / fourth cycle of junior high school. The context of the current science teaching is also presented. Besides, the following aspects are discussed: the preparation of the eighth grade teachers, their professional needs, the pedagogical practices and the theoreticmethodological difficulties faced by them. Another important issue in Science Teaching, which is also discussed in this dissertation, is the need for an efficient scientific literacy so that the citizen may express value judgment about Science and Technology issues. The data about the context were gathered from questionaires answered by the teachers. In value of this information, lesson plans were elaborated and implemented. The goal was to point out alternatives for the development of a teaching-learning evaluation which would be both pleasant for the teachers in relation to the implemented methodology, end meaningful for the students by adding elements such as: interdisciplinary approach, contextualization and preparation by competences. Furthermore it was carried out a deeper analysis of the Brazilian curriculum references (LDB, DCN, PCN, RCB) and content aspects (concepts, procedures e attitudes) to be executed by that branch of human knowledge, aiming at a really Contextualized Science Teaching, qualified and pleasant for the eighth grade level. It is also presented in this paper the profile or the Professional which teach this level at state public schools in Russas, state of Ceará, Vale do Jaguaribe Region. The efficacy of the lesson plans were also analysed by using evaluation procedures with the eighth grade students of the following schools: CAIC Senador Carlos Jereissati and EEF Manuel Matoso Filho, from which the concepts acquired during the implementation of the classes became evident in the students

A interpretação dos sintagmas nominais com adjetivos atributivos por alunos de inglês instrumental

This present work has as objective to analyze the interpretation of the syntactic and semantic meaning performed by third graders in the nominal groups (NGs) with attributive adjectives in the English language in a text of the final exam in the ESP (English for Specific Purposes) discipline. The corpus is made up of 30 exams of two classes from a third grade institution of the biomedical area, corresponding to the basic and advanced levels of the second term in 2006. The text has 24 NGs of different lexical content, a total of 27 NGs in the whole text summing up to 810 analyzed occurrences. The analysis is carried out at the morphologic, syntactic and semantic levels using as theoretical background the traditional and functional grammars (QUIRK et al, 1985; CELSE-MURCIA et al, 1998; TUCKER, 1998), in their semantic aspects, the Semantics (FRAWLEY, 1992) and the Cognitive Linguistics (TAYLOR, 2002). We concluded that the main difficulties were due to the lack of vocabulary and to the use of mother tongue strategies instead of using the top-down strategies for reading a text in English to compensate this gap. We also observed that even when the vocabulary was known, there were difficulties in establishing the semantic and syntactic relations between modifier and noun head. We suggested improvements for the teaching of reading English texts at the third grade grounded in the obtained results such as a more comprehensive study of the several different morphologic and syntactic structures of the NGs with premodifiers and their semantic consequences, an approach of the morphologic, syntactic and semantic aspects of the NGs and the use of both top-down and bottom-up strategies when reading a NG in the English language

Caracterização citoarquitetônica, neuroquímica e de aferência óptica do complexo parabraquial do sagui (Callithrix jacchus)

The parabrachial complex (PB) is an area of the brainstem responsible for the processing and transmission of essential physiologic information for the survival of the organisms. This region is subdivided in approximately nine subregions, considering morphology, cytoarchitectural and functional characteristic. Its neurons have an extensive network of connections with other regions of the nervous system. The objective in this work was to map the retinal projection to the PB and make a citoarchitectonic and neurochemical characterization of this region in the common marmoset (Callithrix jacchus), a primate of the New World. The retinal projections were mapped by anterograde transport of the choleric toxin subunit b (CTb). The citoarchitecture was described through the Nissl method, and the neurochemical characterization was made through immunohistochemical technique to the some neurotransmitters and neuroactives substances present in this neural center. In marmoset PB, in the coronal sections labeled by Nissl method, we found a similar pattern to that evidenced in other animal species. The immunoreactivity against CTb was verified in the PBMv in fibers/terminal, characterizing such as retinal innervations in this area. The immunohistochemical technique reveled that the PB contain cells, fibers and/or terminals immunoreactives to the neuronal nuclear protein, Choline acetyl transferase, nitric oxide synthase, serotonin, enkephalin, substance P, Calcium-binding proteins (calbindin, calretinin e parvalbumin), and glial fibrillary acidic protein. The histochemical technique reveled cells and fibers NADPH-diaphorase reactive. Each one of those substances presented a characteristic pattern of demarcation in PB, and some serve as specific markers of subregions

Espectrometria de emissão óptica com plasma indutivamente acoplado aliada à quimiometria na determinação de íons metálicos no molusco Mytella falcata para discriminação de estuários potiguares

This work examined the possibility of using mussel Mytella falcata as bioindicator sample to detect metal ions in several estuaries potiguares, since species substances that accumulate in their tissues due to its characteristics filter feeders have been used for environmental monitoring. The chemometrics by principal components analysis was used to reduce the size of the original data in order to establish a pattern of distribution of metal ion. Samples were collected at three different points in the estuaries Curimataú, Guaraíra-Papeba, Potengi, Galinhos-Guamaré and Piranhas-Assu having been marked with the location using GPS (Global Positioning System). The determination of humidity content and digestion of the samples were performed using methods described in the Compendium of analytical standards of the Institute Adofo Lutz (2005) and the determination of metal ions of the elements Al, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sn and Zn were performed by optical emission spectrometry with inductively coupled plasma as described by USEPA method 6010C. The results show that it is possible to use this molluscum Mytella falcata in the estuaries of Rio Grande do Norte for the determination of metal ions. The data were subjected to principal components analysis (PCA) which enabled us to verify the distribution pattern of the metal ions studied in several estuaries potiguares and group them according to the metal ions in common with and relate them to the activities in each region

Caracterização geométrica e parametrização de depósitos transacionais recentes e sua aplicação na modelagem de reservatórios petrolíferos

In this beginning of the XXI century, the Geology moves for new ways that demand a capacity to work with different information and new tools. It is within this context that the analog characterization has important in the prediction and understanding the lateral changes in the geometry and facies distribution. In the present work was developed a methodology for integration the geological and geophysical data in transitional recent deposits, the modeling of petroliferous reservoirs, the volume calculation and the uncertainties associate with this volume. For this purpose it was carried planialtimetric and geophysics (Ground Penetrating Radar) surveys in three areas of the Parnaíba River. With this information, it was possible to visualize the overlap of different estuary channels and make the delimitation of the channel geometry (width and thickness). For three-dimensional visualization and modeling were used two of the main reservoirs modeling software. These studies were performed with the collected parameters and the data of two reservoirs. The first was created with the Potiguar Basin wells data existents in the literature and corresponding to Açu IV unit. In the second case was used a real database of the Northern Sea. In the procedures of reservoirs modeling different workflows were created and generated five study cases with their volume calculation. Afterwards an analysis was realized to quantify the uncertainties in the geological modeling and their influence in the volume. This analysis was oriented to test the generating see and the analogous data use in the model construction

Desenvolvimento e calibração de fotômetro solar para medições da profundidade óptica por aerossóis e coluna de água precipitável

Instrumentation is a tool of fundamental importance for research in several areas of human knowledge. Research projects are often unfeasible when data cannot be obtained due to lack of instruments, especially due to impor ting difficulties and the high costs there associated. Thus, in order to collaborate with the enhancement of a national technology, a multiband hand - held sun p hotometer (FSM - 4) was developed to operate in the 500 nm, 670 nm, 870 nm and 940 nm bands. In the 500 nm, 670 nm and 870 nm bands aerosols are monitored for evaluation of the AOD (Aerosol Optical Depth), and the PWC (Precipitable Water Column) is evaluated in the 940 nm band. For the development of the mech anical and electronic parts for the FSM - 4, th e materials and componen ts should combine low cost and quality of the data collected. The calibration process utilized the Langley method (ML) and Modified Langley Method (MLM). These methods are usually applied at high altitudes in order to provide atmosp heric optical stability. This condition however can be found in low height sites as shown in the research by Liu et al. (2010). Thus, for calibration of the FSM - 4, we investigated the atmospher ic optical stability utilizing the ML and MLM at a site in the cit y of Caicó / RN, located in the s emiarid region in northeastern Brazil. This site lies in a region far aw ay from large urban centers and activities generating anthropogenic atmospheric pollution. Data for calibration of the prototype were collected usin g the FSM - 4 in two separate operations during the dry season, one in December 2012 and another in September 2013. The methodologies showed optical atmospheric instability in the studied region through the dispersion of the values obtained for the calibrati on constant. This dispersion is affected by the variability of AOD and PWC during the appl ication of the above mentioned methods . As an alternative to the descr ibed sun photometer calibration , a short study was performed using the sun photometer worldwide network AERONET/NASA (AERsol RObotic NETwork – US Space Agency), installed in Petrolina / PE in Brazil. Data were collected for three days utilizing the AERONET instruments and the FSM - 4, operating simultaneously on the same site. By way of the ML and MLM techniques, convergent test values were obtained for the calibration constants, despite the low amount of data collected. This calibration transfer methodology proved to be a viable alternative to the FSM - 4 calibration .