95 resultados para Cosmeticos - Preparação
Tradução e adaptação transcultural do instrumento de avaliação prenatal selfevaluation questionnaire
Resumo:
Introduction: The human gestation period is 40 weeks. This is the essential time for maternal psychosocial adaptation, in which there is the intense transformation of a life without offspring into a life with one or more children. The Pregnancy Self-Evaluation Questionnaire (PSEQ) has 79 items, subdivided into seven subcategories: acceptance of pregnancy, identification with the maternal role, well-being of mother and baby, preparing for labor, control in labor, relationship with the mother and the relationship with the partner. Objective: To translate and cross-culturally adapt the instrument PSEQ to be used with Brazilian women. Methods: It is a cross-sectional observational study. We followed some methodological steps to achieve the cross-cultural adaptation of this measuring instrument. They are: translation, synthesis, back translation, analysis of the committee of specialists and pre-test. Another questionnaire was applied to characterize the socio-demographic and clinical status of the pregnant women (n = 36). The descriptive statistics was gotten through the average, standard deviation (SD), absolute and relative frequency. The statistical test used for the analysis of the internal consistency was Cronbach's alpha coefficient, using SPSS version 17.0. Results: The volunteers had low socioeconomic status, average age of 25.1 years (± 5.52), and average gestational age of 25.9 weeks (± 8.11). 58.3% of these volunteers had not planned their current pregnancy. The pretest showed that 75% of pregnant women found the questionnaire easy to understand. There was an average of 76.9 (± 3.23) answered items among the participants. Regarding the instrument PSEQ, the identification with the maternal role was the subcategory which showed the highest average 24.8 (± 5.6), while the relationship with the mother had the lowest average 15.4 (± 7.7). The internal consistency ranged from 0.52-0.89. Conclusion: The translation and cross-cultural adaptation of the PSEQ to Portuguese language were carried out with methodological rigor and can be considered an instrument with good internal consistency
Resumo:
The metal concentrations (Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn ) and phosforus(P) had been determined analyzed through Plasma Inductively Coupled Plasme Mass Spectrometer for fine fraction, < 0,63 mm in 22 samples. The sample preparation for analysis had been make in the laboratories of geology of the UFRN. This samples procedures consists in register, dry, bolt and send to analysis in external laboratory (LAKEFIELD GEOSOL) in Belo Horizonte (MG, Brazil). The studied area involves the rivers Trairi, Ararí and Nísia Floresta lagoon, that empties in the sea, situated in the Rio Grande do Norte State. The study objects (Rivers Trairí, Ararí and Nísia Floresta lagoon) receive influences from urban dumpies, agrotoxics and fertilizer, shrimps tank, pastoral, with this, the concentrations of metals (Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, P, Zn) (except phosforus) in some points of the study area had been above of the value of reference what it leads to classify them as not polluted to moderately polluted, as the calculated Igeo. In front of discussed, can say about the environmental problems found in Trairi, Ararí and Nísia Floresta Lagoon are still in small scale, since when regard the studied área is over human activity effects
Resumo:
Many behavioral and biological variables of animals are expressed in the form of biological rhytms, down by the Circadian Timing System, that synchronize them with the environment from external stimuli such as light. One of them is the secretion profile of most circulating hormones regulated by the hypothalamuspirtuitary axis, which controls functions essential for the survival and reproduction of organisms. The sagüi, Callithrix jacchus, one of the most studied species about their endocrine physiology, is an appropriate subject for evaluating the profile of plasma prolactin and cortisol of adult males and females born in captivity throughout the year. Three male and two adult femelas were housed individually and subjected to natural environmental conditions over two years. Blood samples were used to measure the circulating levels of both hormones by methods radioimmunoassay (RIA) and immunoassay (ELISA), respectively. The analysis during the year of the plasmatic values of both hormones test was performed by ANOVA for repeated measures, the correlation of Spearman, and the test of Friedman and Student's t-test. The levels of prolactin in plasma were higher during the months in which there is a greater incidence of births of baby in the colony, possibly serving for modulating the expression of the behavior of parental care in both sexes. The plasma cortisol showed a lift in anticipation of the station with the highest birth rate and may be associated with the preparation of individual participation in caring for the baby, and also with the establishment of emotional bond between reproductive partners. Thus, this study shows that, despite the variations observed in the environment in which the animals live, plasma levels of prolactin and cortisol vary little throughout the year.
Resumo:
T. gondii is an obligate intracellular protozoan and the main cause of retinochoroiditis in humans. The aim of this study was to evaluate the effect of the antipsychotic drugs haloperidol and clozapine on the course of infection by T. gondii of cultured embryonic retinal cells. Embryo retinas of Gallus gallus domesticus (E12) were used for the preparation of mixed monolayer cultures of retinal cells. Cultures were maintained on plates of 96 and 24 wells by 37°C in DMEM medium supplemented with 5% fetal bovine serum for 2 days. After this period, cultures were simultaneously infected with tachyzoites of T. gondii and treated with the antipsychotics haloperidol and clozapine for 48 hours. Treatment effects were determined by both assessing cell viability with the MTT method and evaluating infection outcomes in slides stained with Giemsa. The treatment with haloperidol and clozapine cells infected with T. gondii resulted in higher viability of these cells, suggesting a possible prevention of neuronal degeneration induced by T. gondii. Additionally, intracellular replication of this protozoan in cells treated with haloperidol and clozapine were significantly reduced, possibly by modulation of the parasite s intracellular calcium concentration
Resumo:
The childhood has being highlighted by the great concern about the several contexts in which children are inserted, amongst them, commercial sexual exploitation (CSE). The experience of this violence process brings implications to the person constitution. Thus, this research aimed to understand how commercial sexual exploited adolescents to signify the childhood. Participated of this research four female adolescents that had been assisted by Programa de enfrentamento ao Abuso e Exploração Sexual de Crianças e Adolescentes (Sentinela) , with ages between 12 and 17 years. The corpus was composed by the combination of the semi-structured interview and other procedures, like childish stories, draws and photography. Moreover, we used another instruments to constitute the corpus, like the documental research and we proposed the construction of a life story book of each participant. The corpus was analyzed through the Thematic Content Analysis. Five thematic axes emerged from the participants discourse and theoretical perspective: dynamical of family, scholar process, ludic behavior, conception of childhood and insertion on CSE process. The participants presented a conception about childhood as been a preparation and education phase to ingress in adult life. In other words, while children do not grown up, they go to the school, plays, lives with family, are happy and do not have any responsibilities. Nevertheless, the life experience of these girls was implicated by negligence, sexual abuse, child labor, institutionalization and, evidently, the commercial sexual exploitation. Understanding that the childhood experienced by adolescent, as well as, her insertion on CSECA, constitutes her, while person, we investigated how the interrelation expresses it on participants future perspectives. Their goals are defined based on family constitution and professional improvement, although feelings of disillusion and pessimism had been showed up in some moments. According these results, we pointed to the necessity of the effective proposals that promote real improvement of adolescents life quality, through, in which they could to create alternatives to get over the several risks in which they are exposed, mainly, the CSECA condition
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico
Resumo:
A partir dos diagnósticos das vulnerabilidades da condição juvenil contemporânea, as Políticas Públicas de Juventude tem ganhado maior força e um lugar mais definido nas pautas das demandas e conquistas sociais. Faz-se necessário, então, direcionar atenção para estas Políticas Públicas, a fim de promover uma reflexão sobre como ocorre a execução destas junto ao seu público alvo. Esta dissertação centraliza sua análise no Projovem Adolescente (PJA), uma das modalidades Programa Nacional de Inclusão de Jovens PROJOVEM que se destina ao atendimento de jovens com específica faixa etária entre 15 a 17 anos, com caráter assistencial e socioeducativo. Desta forma, o objetivo geral deste estudo foi discutir as ações do Projovem Adolescente no que diz respeito ao processo socioeducativo, a partir da perspectiva dos adolescentes participantes da cidade de Natal/RN. E, especificamente, objetivou-se: investigar de que maneira os adolescentes avaliam as atividades das quais participam, considerando se suas expectativas coincidem com as propostas do serviço; averiguar a participação dos adolescentes na elaboração, execução e avaliação das ações socioeducativas do serviço; bem como compreender as motivações que contribuem para a inserção e permanência ou evasão dos adolescentes no PJA. Para tanto foram realizados três grupos focais com adolescentes participantes do Projovem Adolescente, em diferentes núcleos do serviço, no município de Natal/RN. Cada grupo focal contou com dois encontros, em que primeiramente foram debatidos aspectos da participação nas ações socioeducativas e, num segundo encontro foram realizadas oficinas de produção de fanzines. A análise qualitativa dos dados foi realizada a partir da perspectiva teórica do materialismo histórico-dialético, utilizando-se como método de análise o Método Comparativo Constante, baseado na Teoria Fundamentada, que busca compreender o significado do fenômeno sob a perspectiva dos participantes. Os resultados foram apresentados divididos em eixos de análise os quais versaram sobre: as concepções dos jovens sobre adolescência e juventude; e a participação nas ações socioeducativas do PJA, destacando-se as características positivas e negativas apontadas pelos participantes, a relação dos jovens com o trabalho e as possibilidades e contribuições do PJA em seus contextos de vida. Em vista da análise empreendida, é possível constatar que a concepção dos participantes sobre a própria vivência da adolescência e juventude se encontra marcada pela absorção de determinadas imagens socialmente atribuídas aos jovens, como a que considera a juventude enquanto etapa de preparação para o mundo adulto. A participação nas ações socioeducativas, por sua vez, foi, de uma maneira geral, avaliada positivamente pelos participantes, não obstante esta avaliação, os jovens apresentaram uma visão muito crítica sobre a execução do serviço no município de Natal, relatando conhecer bem as dificuldades de ordem da gestão, bem como as contradições e limitações nas ações do serviço. Compreende-se a perspectiva da inclusão social no contexto neoliberal em que são implementadas as políticas sociais, contudo acredita-se que dar voz aos jovens participantes contribuiu para proporcionar uma reflexão sobre o modo como as políticas sociais, através do Projovem Adolescente tem atingido seu público, considerando as questões e perspectivas apresentadas pelos jovens como ferramentas a serviço das juventudes na construção de políticas democráticas e efetivas
Resumo:
The present work reports the study of nanoporous structures, aiming at their use in research directed to the current demand of the petroleum industry to value heavy oil. Initially, two ways were chosen for the synthesis of porous structures from the molecular sieves of type Si-MCM-41. In the first way, the structure MCM-41 is precursory for heteroatom substitutes of silicon, generating catalyst of the type Al-MCM-41 from two different methods of incorporation of the metal. This variation of the incorporation method of Aluminum in the structure of Si-MCM-41 was carried out through the conventional procedure, where the aluminum source was incorporated to the gel of synthesis, and the procedure post-synthesis, where the Aluminum source was incorporated in catalyst after the synthesis of Si-MCM-41. In the second way, the MCM-41 acts as a support for growth of nanocrystals of zeolite embedded in their mesoporous, resulting in hybrid MCM-41/ZSM-5 catalyst. A comparative analysis was carried through characterizations by XRD, FTIR, measures of acidity through n-butylamine adsorption for TGA, SEM-XRF and N2 adsorption. Also crystalline aluminosilicate with zeolitic structure MFI of type ZSM-5 was synthesized without using organic templates. Methodologies to the preparation of these materials are related by literature using conventionally reactants that supply oxides of necessary silicon and aluminum, as well as a template agent, and in some cases co-template. The search for new routes of preparation for the ZSM-5 aimed at, above all, the optimization of the same as for the time and the temperature of synthesis, and mainly the elimination of the use of organic templates, that are material of high cost and generally very toxic. The current study is based on the use of the H2O and Na+ cations playing the role of structural template and charge compensation in the structure. Characterizations by XRD, FTIR, SEM-XRF and N2 adsorption were also conducted for this material in order to compare the samples of ZSM-5 synthesized in the absence of template and those used industrially and synthesized using structuring
Resumo:
The present work aims the preparation of filmes of strontium-doped lanthanum manganite (perovskita) yttria-stabilized zirconia (LSM-SDC) films deposited on substrate of YSZ by means of spin coating technique having as principal objective their application to solid oxide fuel cells of intermediate temperature. La0,8Sr0,2MnO3 and Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray fluorescence showed that the route adopted for obtention of powders was effective in the obtention of the compositions with close values to the stoichiometrics. Ethyl cellulose was used as pore-forming agent and mixed with the LSM-SDC powders in weight proportions of 1:24, 2:23 and 1:9. The films were sintered at 1150 °C for 4 h and characterized by X-ray diffraction and scanning electron microscopy technique (SEM) and atomic force. The phases quantification of the precursory powders and of the obtained films was carried through Rietveld method. According with the analysis of SEM, as the content of ethyl cellulose was increased, the pore distribution in films become more uniform and the pore size reduced. The methodology used for the obtention of the films was very efficient, considering a material was obtained with characteristics that were proper to the application as electrolyte/cathode system to solid oxide fuel cells
Resumo:
The quantitative chemical characterization of the inorganic fraction of scale products is very relevant in studying, monitoring and controlling corrosive processes of oil pipelines. The X-ray fluorescence spectrometry (XRF) is a very versatile analytical technique, which can be used in quantitative analysis in solid samples at low concentrations of the chemical element, in the order of few ppm. A methodology that involves sample preparation diluted in the proportion of 1:7 (one portion of the sample for seven of wax), pressed as pellets was used in the XRF calibration for chemical analysis of scale products from oil pipelines. The calibration involved the preparation of reference samples from mixtures of P.A. reagents, aiming to optimize the time consumed in the steps of sample preparation and analysis of Al, Ba, Ca, Fe, K, Mg, Mn, Na, P, S, Si, Sr and Ti, using the same pressed pellet for trace and major elements analysis
Resumo:
The proposal of this work is to evaluate the influence of the organic matter on the results of the analyses of the metals (Zn, Pb, Al, Cu, Cr, Fe, Cd e Ni) for Atomic Absorption Spectrometry (AAS), so much in the extraction stage as in the reading using for that the chemometrics. They were used for this study sample of bottom sediment collected in river Jundiaí in the vicinity of the city of Macaíba-RN, commercial humus and water of the station of treatment of sewer of UFRN. Through the analyses accomplished by EAA it was verified that the interference of the organic matter happens in the extraction stage and not in the reading. With relationship to the technique of X Ray Fluorescence Spectrometry (XRFS), the present work has as intended to evaluate the viability of this technique for quantitative analysis of trace metals (Cr, Ni, Cu, Zn, Rb, Sr and Pb) in having leached obtained starting from the extraction with acqua regia for an aqueous solution. The used samples constitute the fine fraction (<0.063 mm) of sediments of swamp of the river Jundiaí. The preparation of tablets pressed starting from the dry residue of those leached it allowed your analysis in the solid form. This preliminary study shows that, in the case of the digestion chemistry partially of the fine fractions of bottom sediments used for environmental studies, the technique of applied EFRX to the analysis of dry residues starting from having leached with acqua regia, compared her it analyzes of the leached with ICP-OES, it presents relative mistakes for Cu, Pb, Sr and Zn below 10%
Resumo:
This work aims to detect polycyclic aromatic hydrocarbons (PAHs) through optimized analytical techniques, such as gas chromatography with flame-ionisation detector (CGFID), gas chromatography coupled to mass spectrometry (CGMS), Fluorescence Spectroscopy of Molecular and Purpot of oils and greases (POG). Apply to chemometrics, Factorial Planning 23, in the preparation of samples by liquid-liquid extraction. The sample preparation was used for liquid-liquid extraction and factors in this sample was used for the application of factorial planning 23, such as the use of ultrasound, solvents (dichloromethane, hexane and chloroform) and ratio of solvent / synthetic sample. These factors were assigned two types of levels: positive and negative. It was used to form the cube to better analyze the answers. The responses of the eight combinations were obtained in reading the spectrofluorimetric. The optimization of equipment were used, and they served in the HPA's identification of the samples collected in Rio Potengi. The optimization of the equipment was observed every 16's and PAH in the samples was found that the HPA's came from contamination of the Rio Potengi. The contamination comes through organic household waste, hospital waste, and among other contamination that comes from industries that are installed around the River The factorial design of high validity, it was observed a more effective sample preparation. The factorial design of liquid-liquid extraction showed a way to spend less solvent in less time using an ideal solvent, but also a way to extract more analyte from the matrix itself is water. In planning a smaller form factor extraction was the use of ultrasound, the ratio 1:3 corresponding to a solvent and sample 3 and the best solvent was dichloromethane who presented a viable extraction, not discarding the possibility of using also the hexane. The chloroform and may be toxic not had a good extraction
Resumo:
Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C
Resumo:
One of the main applications of methane is in the production of syngas, a mixture of hydrogen and carbon monoxide. Procedures used in this process are steam reforming, CO2 reforming, partial oxidation and autothermal reforming. The present study evaluated and compared the behavior of nickel catalysts supported on mixed oxides of cerium and manganese in the partial oxidation of methane with that of nickel catalysts supported on mixed oxides of cerium and zirconium. Mixed oxides of cerium and zirconium or cerium and manganese were synthesized using two different preparation methods, the polymeric precursor based on Pechini method and combustion reaction using a microwave. This was followed by impregnation with nickel content of 15 %. Samples were calcined at 300, 800 and 900 °C and characterized by specific surface area (SSA), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature programmed reduction (TPR) and the reaction of partial oxidation of methane. The specific areas of samples decrease with the rise in calcination temperature and after nickel impregnation. Metal-cerium solid solution was formed and the presence of other manganese species outside the solid solution structure was confirmed in the compound with the highest amounts of manganese oxides showed. With regard to scanning electron microscopy, supports based on cerium and zirconium prepared by Pechini method exhibited agglomerated particles without uniform geometry or visible pores on the surface. However, compounds containing manganese presented empty spaces in its structure. Through synthesis by combustion reaction, morphology acquired independently of the proposed composition demonstrated greater porosity in relation to Pechini synthesis. Although catalysts were prepared using different synthesis methods, the insertion of nickel showed very similar reduction profiles (TPR). In relation to nickel catalysts supported on mixed oxide of cerium and zirconium, there is an initial reduction of NiO species that present certain interaction with the support. This is followed by the reduction of Ce4+ in Ce3+ surface, with subsequent bulk reduction. For catalysts containing manganese, a reduction of nickel oxide species occurs, followed by two stages of reduction for species Mn2O3 in Mn3O4 and Mn3O4 in MnO, with subsequent reduction of bulk. With respect to partial oxidation reactions, the nickel catalyst supported on mixed oxide of cerium and zirconium, prepared using the Pechini method, exhibited CH4 conversion of approximately 80 %, with conversion of 81 % when prepared by combustion. This behavior continued for 10 hours of reaction. Manganese content was also found to directly influence catalytic activity of materials; the greater the manganese oxide content, the faster deactivation and destabilization occurred in the catalyst. In both synthesis methods, the nickel catalyst supported on mixed oxide of cerium and zirconium maintained an H2/CO ratio very close to 2 during the 10 hours of partial oxidation reaction. Samples containing manganese displayed smaller H2/CO ratios and lower performance in partial oxidation.
Resumo:
Orthoferrites AFeO3 (A = rare earth) are an important class of perovskite oxides that exhibit weak ferromagnetism. These materials find numerous applications as chemical sensors, cathodes for fuel cells and catalysis, which make them interesting from the standpoint of science and technology. Their structural, electrical and magnetic properties are dependent on many factors such as the preparation method, heat treatment conditions, chemical composition and replacement of cations in sites A and/or B. In this paper, LaFe1-xMnxO3 (0 ≤ x ≤ 1) orthoferrites-type was prepared by Pechini method and Microwave-assisted combustion reaction in order to evaluate the influence of synthesis route on the formation of oxide, as well as the effect of parcial replacement of iron by manganese and heat treatment on the magnetic properties. The precursor powders were calcined at 700°C, 900°C, 1100°C and 1300°C for 4 hours and they were characterized by the techniques: Thermogravimetric analysis (TGA), X ray diffraction (XRD), Refinement by Rietveld method, Scanning electron microscopy (SEM), Reduction temperature programmed (RTP) and Magnetic hysteresis measurements performed at room temperature. According to the XRD patterns, the formation of perovskite phase with orthorhombic structure was observed for the systems where 0 ≤ x ≤ 0.5 and rhombohedral for x = 1. The results also showed a decrease of lattice parameters with the parcial replacement of iron by manganese and consequently a reduction in cell volume. The hysteresis curves exhibited weak ferromagnetism for the systems prepared by both synthesis methods. However, a dependence of magnetization as a function of dopant content was observed for samples produced by Pechini method. As for the systems prepared by combustion reaction, it was found that the secondary phases exert a strong influence on the magnetic behavior