Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Avaliação das pressões respiratórias máximas em crianças e adolescentes da grande Natal: elaboração de uma equação preditiva

The human respiratory system was so designed that would allow efficient ventilation, regardless of variations in the external environment that may hinder the act of breathing, such an act involves dozens of variables, among them we find the respiratory depression, which is nothing more than respiratory muscle strength. The pressures are widely used in several cases: Neuro-muscular; evolution of pulmonary dysfunction and a predictor for discontinuation of mechanical ventilation. Therefore it was proposed to carry out evaluations of these respiratory pressures for children and adolescents aged 10 to 16 years and propose a predictive equation that involves the anthropometric variables age (A, years), body mass (BM, kilograms) and height (H, meters) with maximal respiratory pressures (maximum inspiratory and expiratory pressure). Evaluations were performed in this age group of students in public and private schools of the Grande Natal , measurements were performed using the analogue manometer, were children and adolescents and their parents gave informed consent. 517 samples were taken, and 250 for males (M), 255 for females (F) and 12 were excluded according to our exclusion criteria. The sample was subdivided into three age groups (10-11, 12-13 and 14 to 16 years old). It was found through the student s t test (p ≤ 0.05) for all variables studied, children and male adolescents had higher means than females, except for the MC. For the correlation between the variables found significant correlation (p <0.05) among all the variables when analyzed as pairs except between MIP and height for females. The development of predictive equations (for p ≤ 0.05) based on three types of strategies adopted were restricted to two association between anthropometric variables isolated, resulting in: for males: MIP = -32.29 + (-2.11*A) + (-0.52*BM), MIP = 9.99 + (-0.36*BM) + (-49.40*H); MEP = 18.54 + 3.53*A + 0, 42*BM, MEP = -33.37 + 2.78*A + 52.18* H, MEP = -17.39 + 0.33*BM + 55.04*H; and, for females we find: MEP = 24.32 + 2.59 * A + 0.24*BM

Sensibilidade da cinética do zinco e avaliação nutricional em crianças submetidas ao teste venoso de tolerância ao zinco

Objective: The purpose of this study was to investigate the kinetics of this micronutrient in schoolchildren between the ages of 6 and 9 years, of both sexes, and to verify its sensitivity in detecting alterations in body zinc status. Methods: Nutritional assessment was performed by body mass index. Food intake, venous zinc tolerance test and zinc kinetics were carried out before and after 3-month oral zinc supplementation. Results: Of the 42 children studied, 76.2% had healthy weight. Only energy, calcium and fiber intake were suboptimal before and after oral zinc supplementation. Serum zinc and total-body zinc clearance, although at normal levels, increased significantly after zinc supplementation. Conclusion: We concluded, therefore, that kinetics is a sensitive tool for detecting changes in body zinc status, even in children without a deficiency of this mineral. Furthermore, kinetics showed a positive response to supplementation and may be a sensitive parameter to evaluate the efficacy of this therapy

Interação competitiva do zinco e ferro após administração oral e venosa de zinco em crianças eutróficas

The aim of this study was to assess the acute and chronic effects of zinc in serum iron profile of children aged 6-9 years in relation to nutritional status and dietary intake. The study participants were 11 children regardless of sex, aged 6-9 years. They were selected from three public schools of the city of Natal, Brazil. Body mass index was used to assess nutritional status. In order to determine the patterns of childhood growth and ideal weight we used the standards of the World Health Organization. The dietary intake assessment was based on information from a three-day prospective food survey. The variables were energy intake, protein, lipids, carbohydrates, fiber, calcium, iron and zinc. All children underwent an intravenous administration of zinc (IVAZn) before and after oral administration of zinc (OAZn) (5 mg Zn / day) for three months. We measured serum iron, hematocrit, hemoglobin and total protein, before and after the use of oral zinc. The analysis of hematocrit, hemoglobin and total protein was performed using standard methods of clinical laboratory. Zinc levels and serum iron were measured by atomic absorption spectrophotometry. The project was evaluated and approved by the Ethics in Research Committee of Federal University of Rio Grande do Norte. Results: All children had normal weight. The consumption of energy, fat, fiber, calcium and iron were below recommended levels. However, the levels of protein and carbohydrates were high. Protein and zinc increased significantly after OAZn. Carbohydrate and protein were elevated in the blood. After OAZn, both protein and zinc increased, being statistically significant. Conclusion: The potential inhibitory effect of physiological or pharmacological doses of zinc on the profile of serum iron was observed in children with healthy weight and aged between 6 and 9 years. This negative effect of zinc did not affect the levels of hematocrit or hemoglobin, and therefore did not cause anemia. This was a multidisciplinary study, involving researchers from medicine, nutrition and pharmacy. This met the requirements of multidisciplinarity of the Post Graduate Program in Health Sciences of Federal University of Rio Grande do Norte.

Avaliação eletromiográfica dos músculos do assoalho pélvico na síndrome dos ovários policísticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação dos efeitos da reeducação postural global (rpg) em pacientes com espondilite anquilosante

The Ankylosing Spondylitis (AS) is a chronic inflammatory disease that primarily affects the axial skeleton, leading to limitation of spine mobility and functional disability. Physical therapy, especially exercise, is an important part in your treatment. The Global Postural Reeducation(GPR),a method that uses stretching based on evaluation of muscular chains, with significant interference in postural changes may be a complementary alternative for the treatment of this disease. The aim was to evaluate the effects of Global Postural Reeducation (GPR) in patients with Ankylosing Spondylitis (AS) and compare GPR with group conventional segmental self-stretching and breathing exercises. This is a controlled interventional study of 38 patients divided into 2 groups: a GPR group (n = 22) and a control group (n = 16). Both groups were treated over four months. With the GPR group patients, positions that stretched the shortened muscle chains were used. With the control group patients, conventional segmental self-stretching and breathing exercises were performed. The variables analyzed were: pain intensity, morning stiffness, spine mobility, chest expansion, functional capacity (Health Assessment Questionnaire - Spondyloarthropathies - HAQ-S), quality of life (Medical Outcome Study Short Form 36 Healthy Survey-SF-36), and disease activity (Bath Ankylosing Spondylitis Disease Activity Index - BASDAI). Statistical analysis was used with a significance level of p < 0.05. There was a statistically significant difference for all the parameters analyzed between pre and post-treatment in both groups. In the inter-group comparison the GPR group showed a statistically significant improvement in morning stiffness (p = 0.01), spine mobility parameters, except finger-floor distance (p = 0.11), in chest expansion (p = 0.02), and in the physical aspect component of the SF-36 (p = 0.00).Finally, we observed that this sample of patients with AS ,treatment with RPG 60 seems to have a better response in some clinical measures, than the conventional self stretching performed in groups. Further studies are needed to further evaluate this therapeutic alternative in the EA

Um modelo analítico da qualidade da dieta de adolescentes estudantes da rede publica de ensino de Natal, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Legislação de rotulagem nutricional: instrumento de informação na promoção de escolhas alimentares - Natal-RN

Resolutions of the Board of numbers 359 and 360, of December 23, 2003, relating to Nutrition Labelling for Packaged Foods, establish quality standards and provide the education activities for health consumption, since one of the factors that enable the selection of healthier foods are the food labels as an important part in nutrition education. This is a descriptive study with a cross-sectional design. To calculate sample size, it was considered a margin of error of 20%, confidence level of 95% and prevalence of 52.5% for verifying nutritional information in a pilot study conducted in 2007. A total of 145 subjects were interviewed, resulting in 371 consumers in Natal, Rio Grande do Norte, Brazil, in order to determine prevalence of consulting nutritional information contained on food labels as a nutritional guideline for consumers and its association with sociodemographic variables as well as identify the intervention measures suggested by intervieweds so that this information can be better used to select healthy foods. Twenty-five of the 69 supermarkets belonging to the Supermarket Association of Rio Grande do Norte (ASSURN) were randomly selected. Data collection relied on interviews and extensive direct observation, using a semi-structured form composed of eight closed questions, some of which were multiple choice, and ten open questions. The chi-square test was performed for statistical analysis, using Statistical Package for Social Sciences (SPSS) 15.0 software. Label information most consulted was: expiry date (91.6%); product brand (49.4%); nutritional information (47.0%); zero trans fat (32.9%); zero sugar content (12.8%); zero fat content (3.0%); rich in fibers (2.7%); whether light or diet (30.4%); list of ingredients (16.8%); whether the product contained gluten or not (4.1%). When asked about the importance of nutritional information, 96.8% of the subjects responded important or very important ; of these 46.6% and 3.8% reported partially or totally understanding the information presented. It was found that 41.6% of the consumers consulted nutritional information for dietary reasons related to nontransmissible chronic diseases and 35.7% to be able to choose healthier foods. The data show a significant association between motivation to choose healthier foods and higher family income and schooling (p<0.0001). The intervention measures mentioned to make nutritional information better understood and used were: information and orientation about nutritional information, provided by qualified professionals in the supermarkets, the commercial establishment or the product manufacturer (73.9%) and media disclosure about the nature, importance and purpose of nutritional information (42.9%). In despite of communication noises the consumers use the nutrition claim for the nutritional guidance, showing association with some demographic variables. However, they desire the implementation of intervention measures that can be contextualized in the political construction of nutrition education to promote healthy food choices

Avaliação do estado nutricional relativo ao selênio e da expressão gênica de selenoproteínas em pacientes com aterosclerose tratados com estatinas

The aim of this study was to determine the effects of the use of rosuvastatin in patients with atherosclerosis, in relation to blood parameters of selenium and selenoproteins, and also observe possible changes in gene expression of selenoproteins in these patients. The sample consisted of 27 adult and elderly patients with a clinical diagnosis of coronary artery disease undergoing angioplasty, treated at Natal Hospital Center hospital, Natal, RN. Patients were treated with rosuvastatin 10 mg/day during four months. Anthropometric variables such as body mass index (BMI) and Waist circumference (WC) were measured before and after treatment, as well as lipid profile, blood glucose and liver enzymes (AST and ALT). The diet of the patients was also analyzed using 24-hour diet recall. We analyzed the concentrations of selenium in plasma and erythrocytes, and also the activity of Glutathione Peroxidase and gene expression by Real Time PCR of selenoproteins GPx1, SelP1 and SelN1. Patients had mean age of 61.0 ± 9.4 years, 59.3% were men and 40.7% were women. After four months of treatment there was significant reduction of CA and, according to BMI, most were overweight. The intake of macronutrients, cholesterol, polyunsaturated fatty acids, monounsaturated and saturated was adequate, but the energy and fiber intake was below the recommendations. Regarding the selenium intake was observed a high prevalence of inadequacy. As expected, after treatment with rosuvastatin, a significant reduction in total cholesterol, LDL and glucose, which was not observed for HDL. Selenium concentrations in plasma and erythrocytes showed no changes, keeping within the established cutoffs. We observed a significant increase in GPx enzyme activity and mRNA expression of GPX1 and SEPN1, but not for gene SEPP1. Thus, it was found that treatment with rosuvastatin did not reduce the expression of selenoproteins. More studies are needed to clarify the effects of rosuvastatin on gene expression of selenoproteins in patients with atherosclerosis

Avaliação do status de zinco e da expressão gênica de metalotioneínas em pacientes com aterosclerose tratados com rosuvastatina

The study had as objective to evaluate the zinc status by means of dietary intake, zinc in plasma and in erythrocytes and the metallothionein gene expression in patients with atherosclerosis in use of rosuvastatin. The research involved 27 adult and elderly patients of both genders with atherosclerosis that were treated with rosuvastatin (10mg/day) during 4 months. We performed the dosage of lipids, glucose, AST and ALT, ultrasensitive C-reactive protein (hsCRP), plasmatic and erythrocyte zinc and 1 and 2 metallothionein gene expression. The assessment of body mass index (BMI) and abdominal circumference (AC) was performed, besides the analysis of dietary intake of patients. The majority of the evaluated patients presented overweight, before and after the treatment, with no significant difference between the times of the study. It was identified that the AC was significantly reduced in the group (p<0.05) after the intervention. The majority of the patients had intake below the recommendation of calories and fibers and above recommendation of proteins. The mono and polyunsaturated fats were adequate for the majority of the patients, however, the saturated fat and cholesterol were consumed in excess by a great part of the individuals. The intake of zinc was inadequate, being noticed an inadequacy of 100% in the male gender and of 84% in the female. After the treatment with rosuvastatin there was a significant reduction in the total cholesterol (TC) and LDL-c (p<0.01) and no alterations were observed in the HDL-c and triacylglycerols. It was also verified that the reduction of glycemia (p<0.05) and of hsCRP (p<0.01). The analysis did not demonstrate significant differences in the plasmatic and erythrocyte zinc concentration after the treatment. There was, after the treatment, reduction of the MT1F gene (p<0.05) without, however, occurring significant alterations in the MT2A gene. The treatment with rosuvastatin was effective in the reduction of TC and LDL-c, and promoted the reduction of inflammatory marker hsCRP. The zinc in the plasma and erythrocyte was not altered by the use of the medication and there was a reduction in the MT1F gene, possibly due to the reduction of inflammation. The majority of patients presented inadequate intake of zinc and this inadequacy did not have relation with the mineral parameters in plasma and erythrocytes or with the metallothionein gene expression

Tecendo Papéis:viagem pelos saberes e práticas do ensino de arte

Nowdays, recycling became a relevant social and educational aim among many other factors, which involve balance between man and nature. This study relates the experiences with the production of recycled handmade paper directed at the teaching in Universidade Federal do Rio Grande do Norte UFRN, and through workshops of carnauba recycled handcrafts papers as a pioneer activity accomplished at the Felix Rodrigues Foundation, in the city of Pendências, Açu Valley, Rio Grande do Norte. A bibliographic review was done about the history of handmade paper and a discussion about carnauba´s paper artistic possibilities in art-education. Analyses within the context of art teaching, accordingly to Ana Mae Barbosa´s triangle propose and, also, Buoro, Ostrower and Nachmanovitch´s pedagogy of art. It deals with a group of artisans in order to establish the nature of their relationship and the possibilities of achieving more ecological awareness. Finally, we intend to realize a dialogue with Morin and other authors

Fibra de crital fotônico: fundamentação e aplicações

The main purpose of this dissertation, consists of the study and analysis of the PBG (Photonic Band Gap )..tecnology incorporated in optical fiber structures. So, we'l1 present a complete PBG structure theory, and folowing this, we'l1 present also a chapter for convencional optical fiber, due to the need to construct the base theory of them, and latter a more complete work about photonic crystal fiber. Finaly, we'l1 show the results of the signals , dispersion, and obtained curves under the right dimensions according to the required signals, for convencional optical and photonic crystal fiber. Knowing that PBG crystals with low losses act as perfect mirrors for forbidden frequences and knowing that the persence of structures of PBG as substrates, brings some desirable characteristics such as spontaneous emition supression and superficial waves. We' 11 show according to these characteristics its applications in telecomunication. Therefore, the enphasis of this work is to show that the optical fibers are the only practible thing to integrate the enormous quantity of data and video at intemet' s market, developing, manipulating, changing, and multiplexing the optical fibers chanels in an area where we expect that the photonic crystals has an important hole, since the photonic crystals can be projected and made to avoid losses in the bands of certain wavelength which permits the increase in efficiency ofthe optical components projected with crystals. A sequence of this work would be the utilisation of the PBG structures in the new system of optical network without fiber developed by Bell laboratories of the lucent tecnology, last year using light rays for transmiting information through the air. The new system of optical networks without fiber will permit sending the data of 15 cd-rooms in less then one second, what represents 65 times more information than those transmitted through the actual radio frequences

Uma fonte chaveada de 50kW com correção de fator de potência para alimentação de uma tocha de plasma Indutiva utilizando técnicas de controle digital

This work deals with the development of an experimental study on a power supply of high frequency that provides the toch plasmica to be implemented in PLASPETRO project, which consists of two static converters developed by using Insulated Gate Bipolar Transistor (IGBT). The drivers used to control these keys are triggered by Digital Signal Processor (DSP) through optical fibers to reduce problems with electromagnetic interference (EMI). The first stage consists of a pre-regulator in the form of an AC to DC converter with three-phase boost power factor correction which is the main theme of this work, while the second is the source of high frequency itself. A series-resonant inverter consists of four (4) cell inverters operating in a frequency around 115 kHz each one in soft switching mode, alternating itself to supply the load (plasma torch) an alternating current with a frequency of 450 kHz. The first stage has the function of providing the series-resonant inverter a DC voltage, with the value controlled from the power supply provided by the electrical system of the utility, and correct the power factor of the system as a whole. This level of DC bus voltage at the output of the first stage will be used to control the power transferred by the inverter to the load, and it may vary from 550 VDC to a maximum of 800 VDC. To control the voltage level of DC bus driver used a proportional integral (PI) controller and to achieve the unity power factor it was used two other proportional integral currents controllers. Computational simulations were performed to assist in sizing and forecasting performance. All the control and communications needed to stage supervisory were implemented on a DSP