Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber

Tubulações de PRFV com adição de areia quartzosa visando sua aplicação na indústria do petróleo

Fillers are often added in composites to enhance performance and/or to reduce cost. Fiberglass pipes must meet performance requirements and industrial sand is frequently added for the pipe to be cost competitive. The sand is added to increase pipe wall thickness, thus increase pipe stiffness. The main goal of the present work is to conduct an experimental investigation between pipes fabricated with and without de addition of sand, to be used in the petroleum industry. Pipes were built using E-glass fibers, polyester resin and siliceous sand. The fabrication process used hand lay up and filament winding and was divided in two different parts: the liner and the structural wall. All tested pipes had the same liner, but different structural wall composition, which is the layer where siliceous sand may be added or not. The comparative investigation was developed considering the results of longitudinal tensile tests, hoop tensile tests, hydrostatic pressure leak tests and parallel-plate loading stiffness tests. SEM was used to analyze if the sand caused any damage to the glass fibers, during the fabrication process, because of the fiber-sand contact. The procedure was also used to verify the composite conditions after the hydrostatic pressure leak test. The results proved that the addition of siliceous sand reduced the leak pressure in about 17 %. In the other hand, this loss in pressure was compensated by a stiffness increment of more than 380 %. MEV analyses show that it is possible to find damage on the fiber-sand contact, but on a very small amount. On most cases, the contact occurs without damage evidences. In summary, the addition of sand filler represented a 27.8 % of cost reduction, when compared to a pipe designed with glass fiber and resin only. This cost reduction combined to the good mechanical tests results make siliceous sand filler suitable for fiberglass pressure pipes

Cecília Meireles: mulher ao espelho, imaginário poético e metafísica do amor em Viagem e Mar Absoluto

En el florescer de la modernidad brasileña, surge la poesía de Cecília Meireles, revelando la mujer que opta conscientemente por la labor intelectual, por la especulación filosófica del amor y por la pasión de escribir. La lectura de su obra representa um desafío a la sensibilidad del estudioso de la literatura. En esta disertación, tratamos de ese trabajo em filigranas que la autora realiza. Nos situamos em las obras Viagem y Mar Absoluto como anclas simbólicas de un discurso que nos remite a la relación del poetar com el pensar. Se inserta, así, esa poética ceciliana en um modo filosófico platónico, trayendo elementos simbólicos, míticos, metafóricos capaces de remitirnos a las interpretaciones filosóficas del siglo XX, tal la heideggeriana que entiende la poesía dentro del principio del eterno juego del ser, que es lo del próprio lenguaje. Nuestra preocupación fundamental fue trillar los caminos del erostismo filosófico y la búsqueda de la autora em transcender la rigidez de los límites entre el masculino y el femenino, lanzándose em um imaginario poético cristiano, reinterpretado neoplatonicamente. Se exponen Mujer y Letras al espejo, velando y desvelando marcas e trazos de identidad. Tal juego especular nos ofreció elementos poéticos, estéticos y una experiencia ceciliana del lenguaje del ser, designio de la poesía mísma. De esta nuestra iniciativa, que es también reflejada y reflexiva, reunimos a las Letras la Filosofia, resaltando que ambas de manera diferente - nos dieron acceso a la construcción de esa poesía en que fulguran la escritura, el ser y la naturaleza metaforizada, caracterizando la multiplicidad de sentidos y la pluralidad de voces del presente y del pasado

Administração repetida de baixas doses de reserpina: um possível modelo para o estudo de déficits cognitivos e motores associados à Doença de Parkinson

Parkinson's disease (PD) is one of the most common neurodegenerative brain disorders and is characterized primarily by a progressive degeneration of dopaminergic neurons nigroestriatais. The main symptoms of this disease are motor alterations (bradykinesia, rigidity, tremor at rest), which can be highly disabling in advanced stages of the condition. However, there are symptomatic manifestations other than motor impairment, such as changes in cognition, mood and sensory systems. Animal models that attempt to mimic clinical features of PD have been used to understand the behavioral and neural mechanisms underlying neurophysiological disturbance of this disease. However, most models promote an intense and immediate motor impairment, consistent with advanced stages of the disease, invalidating these studies for the evaluation of its progressive nature. The administration of reserpine (a monoamine depletor) in rodents has been considered an animal model for studying PD. Recently we found that reserpine (in doses lower than those usually employed to produce the motor symptoms) promotes a memory deficit in an aversive discrimination task, without changing the motor activity. It was suggested that the administration of this drug in low doses can be useful for the study of memory deficits found in PD. Corroborating this data, in another study, acute subcutaneous administration of reserpine, while preserving motor function, led to changes in emotional context-related (but not neutral) memory tasks. The goal of this research was to study the cognitive and motor deficits in rats repeatedly treated with low doses of reserpine, as a possible model that simulates the progressive nature of the PD. For this purpose, 5-month-old male Wistar rats were submitted to a repeated treatment with vehicle or different doses of reserpine on alternate days. Cognitive and motor parameters and possible changes in neuronal function were evaluated during treatment. The main findings were: repeated administration of 0.1 mg / kg of reserpine in rats is able to induce the gradual appearance of motor signs compatible with progressive features found in patients with PD; an increase in striatal levels of oxidative stress and changes in the concentrations of glutamate in the striatum were observed five days after the end of treatment; in animals repeatedly-treated with 0. 1 mg/kg, cognitive deficits were observed only after the onset of motor symptoms, but not prior to the onset of these symptoms; 0.2 mg / kg reserpine repeated treatment has jeopardized the cognitive assessment due to the presence of severe motor deficits. Thus, we suggest that the protocol of treatment with reserpine used in this work is a viable alternative for studies of the progressive appearance of parkinsonian signs in rats, especially concerning motor symptoms. As for the cognitive symptoms, we suggest that more studies are needed, possibly using other behavioral models, and / or changing the treatment regimen

Interações físicas e psicossociais em mulheres com fibromialgia

Fibromyalgia (FM) is a non-inflammatory rheumatic syndrome of unknown etiology, with symptoms of diffuse musculoskeletal pain and presence of specific anatomic sites called tender points. The symptoms are often associated with fatigue, sleep disturbances, morning stiffness, alterations in pain perception, anxiety and depression. Fibromyalgia exhibits a correlation between physical and behavioral symptoms, which have a negative influence on the quality of life of patients. Emotional skills are important factors since they are related to subjective well-being, personal productivity, social interaction and interpersonal relationships. We aim to describe the physical and psychosocial interactions in women with FM, showing the association between perceived social support and affect with symptoms of pain, functionality and mood. We will also describe a body representation of pain in women with FM. Data were collected over 3 years and the sample size ranged between studies. This is an exploratory cross-sectional study conducted with a convenience sample of 63 women with FM and 42 healthy women as a control group (CT), aged 20-76 years, recruited through spontaneous demand at Onofre Lopes University Hospital (HUOL) and the Clinical School of Physiotherapy of Universidade Potiguar (UNP). The Fibromyalgia Impact Questionnaire (FIQ), Beck Depression Inventory (BDI), Social Support Scale (MOS), Hamilton Anxiety Scale and Scale of Positive and Negative Affect Schedule (PANAS), in addition to pressure algometry were used. For data analysis, we used parametric and non-parametric tests and a general linear model with adjustment variables and analysis of variance. A significant difference was found between pain threshold and tolerance, functionality, depression, anxiety, social support, and positive and negative affect between the groups. Affective states and social support were associated with anxiety, depression and functionality. A body was drawn representing pain with higher incidences in trapeze, supraspinatus and second ribs. The reason for studying sensory aspects, affective behavior and social support in FM patients opens perspectives for scientific and clinical research of this syndrome. Women with chronic pain such as FM appear to have altered mood states, less social support and affective dysfunctions, influencing the other symptoms of the syndrome

Avaliação da estimulação da medula espinhal como modelo de tratamento da doença de parkinson no primata Callithrix jacchus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Caracterização de soluções de quitosana por espalhamento dinâmico de luz

Dynamic light scattering was used to monitor relaxation processes in chitosan solutions at concentrations within the semi-dilute and concentrated regimes, Kowhlrausch-Williams-Watts (KWW) equation being successfully fitted to intensity correlation function data. The dependence of KWW equation parameters on chitosan concentration indicated that an increase in concentration from semi-dilute to concentrated regimes resulted in narrowing the distribution of relaxation rates; temperature dependence indicated the relaxation process as described as an energy activated process, whose parameters were function of the interaction between chitosan chains (enthalpy of activation) and rigidity of chitosan conformations (pre-exponential factor)

Implicações socioeconômicas e ambientais da pesca artesanal de lagosta em Touros/RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Nucleação e excitação de paredes de Néel em filmes finos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Uso de resíduos de queima de casca de café e argila da região sul da Bahia na obtenção de isolador elétrico cerâmico

The electrical ceramic insulators industry, uses noble raw materials such as siliceous and aluminous clays of white burning, in order to provide plasticity of the mass and contribute to electrical and mechanical properties required of the product, and feldspar with the flux function In literature references the composition of the masses indicates that the clay participates in percentage between 20 and 32, and feldspar 8 to 35, these materials have significant cost. In this research was performed the total replacement of commercial clay, for white burning clay from Santa Luzia region in southern Bahia and partial replacement of feldspar by ash residue of husk conilon coffee burning, from extreme south of Bahia. The objective of replacement these raw materials is to aver its technical feasibility and call attention for the embryo pole of ceramic industry for the existing in the south and extreme south of Bahia, which has significant reserves of noble raw materials such as clay white burning, kaolin, quartz and feldspar, and generates significant volume of gray husk conilon coffee as alternate flux. Clay Santa Luzia is prima noble material whose current commercial application is the production of white roofing. The residue of coffee husk ash is discarded near of production sites and is harmful to the environment. Phase diagrams and statistic design of experiments, were used for optimization and cost savings in research. The results confirmed the expectations of obtaining electrical ceramic insulators, with white burning clay of Santa Luzia and partial replacement up to 35.4% of feldspar, by treaty residue of conilon ash coffee husk burning. The statistic design that showed best results was for formulation with percentages of: clay 26.4 to 30.4%; kaolin 14.85 to 17.1%; feldspar 12.92 to 16.96%; R2 residue 7.08 to 9.2% and Quartz 32.5 to 38.75%, relative to the total mass of the mixture. The best results indicated; 0.2 to 1.4% apparent porosity , water absorption 0.1 to 0.7%, flexural strength 35 to 45MPa , dielectric strength 35-41 kV/cm , the transverse resistivity 8x109 2.5x1010 Ω.cm and for the dielectric constant ε/ε0 7 to 10.4, specification parameters for manufacturing ceramic electrical insulators of low and medium voltage.

Desenvolvimento da célula base de microestruturas periódicas de compósitos sob otimização topológica

This thesis develops a new technique for composite microstructures projects by the Topology Optimization process, in order to maximize rigidity, making use of Deformation Energy Method and using a refining scheme h-adaptative to obtain a better defining the topological contours of the microstructure. This is done by distributing materials optimally in a region of pre-established project named as Cell Base. In this paper, the Finite Element Method is used to describe the field and for government equation solution. The mesh is refined iteratively refining so that the Finite Element Mesh is made on all the elements which represent solid materials, and all empty elements containing at least one node in a solid material region. The Finite Element Method chosen for the model is the linear triangular three nodes. As for the resolution of the nonlinear programming problem with constraints we were used Augmented Lagrangian method, and a minimization algorithm based on the direction of the Quasi-Newton type and Armijo-Wolfe conditions assisting in the lowering process. The Cell Base that represents the composite is found from the equivalence between a fictional material and a preescribe material, distributed optimally in the project area. The use of the strain energy method is justified for providing a lower computational cost due to a simpler formulation than traditional homogenization method. The results are presented prescription with change, in displacement with change, in volume restriction and from various initial values of relative densities.

Desenvolvimento e caracterização de um eco-compósito de poliuretano de mamona e fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. Project phases consisted on the initial treatment of fibers with alkaline solution (NaOH) at 0.05 mols for removal of impurities, developing methods to convert these fibers (reinforcement) blended with castor oil polyurethane (matrix) in eco-composite with different proportions (5%, 10%, 15% and 20%). Fiber properties were evaluated by analysis of SEM, XRD and FTIR. The composites were produced by compression molding with dimensions 30x30x1cm. For characterization of the composites the following tests were performed: mechanical (tensile, compression, shore hardness A) according the standards and testing water absorption, moisture regain and biodegradation. The analysis of thermal properties on fibers and composites were by TG, DSC, thermal conductivity, resistivity, heat capacity and thermal resistance. Analyzing the results of these tests, it was observed that the composite reinforced with 20% showed a better thermal performance between others composites and dimensional stability when compared to commercial thermal insulation. Also is possible to observe a balance in moisture absorption of the composite being shown with its higher absorption rate in this same sample (20%). The micrographs show the fiber interaction regions with polyurethane to fill the empty spaces. In hardness and compression testing can identify that with increasing percentage of the fiber material acquires a greater stiffness by making a higher voltage is used for forming necessary. So by the tests performed in eco-composites, the highest percentage of fiber used as reinforcement in their composition obtained a better performance compared to the remaining eco-composites, reaching values very close to the PU.

Relações de cooperação em consórcios públicos de regiões metropolitanas: análises do CONDIAM/PB e consórcio grande Recife

With the disorganized decentralization occurred in Brazil after the 1988 Constitution, municipalities have risen to the level of federal entities. This phenomenon became known as "municipalism" also brought some negative effects such as low capacity financial, economic and political of these entities. In the face of this reality , the municipalities sought in models of collaborative features to address public policy issues ultrarregionais, one of these models are the Public Consortia. Characterized as the organization of all federal entities that aim to solve public policy implementation alone that they could not, or spend great resources for such. This reality of the municipalities have an aggravating factor when looking at the situation in Metropolitan Regions (MRs). This is because the RMs has a historical process of formation that does not encourage cooperation, since that were created top-down during the military regime. Furthermore, the metropolitan municipalities have significant power asymmetries, localist vision, rigidity earmarked revenues, different scenarios conurbation, difficulty standardization of concepts and others that contribute to the vision of low cooperation of these metropolitan areas. Thus, the problem of this work is in the presence of collaborative arrangements, such as the Public Consortia in metropolitan areas, which are seen as areas of low cooperation. To elucidate this research was used for analysis the cases of CONDIAM/PB and Consórcio Grande Recife/PE, because they are apparently antagonistic, but with some points of similarity. The cases has as foundation the Theory of Common Resources, which provides the possibility of collective action through the initiative of individuals. This theory has as its methodology for analyzing the picture IAD Framework, which proposes its analysis based on three axes: external variables, the arena of action and results. The nature of the method of this research was classified as exploratory and descriptive. For the stage of date analysis, was used the method of document analysis and content, Further than of separation of the cases according to theur especificities. At the end of the study, noted that the CONDIAM/PB was a strategy of municipal government of Joao Pessoa to attract funds from the Federal Government for the purpose of to build a landfill, and over the years the ideology of cooperation was left aside, the prevailing view localist municipalities. In the case of Consórcio Grande Recife/PE, members act with some degree of cooperation, especially the collaborative aspect of the region, however, still prevails with greater strength the power of the state of Pernambuco in the decisions and paths of the consortium. Thus, was conclude that the Public Consortia analyzed are an experience of collaborative arrangement, from the initiative of members, as the theory of common resources says, but has not actually signed as a practice of collective action to overcome the dilemmas faced by metropolitan areas

Fachada flexível para casa padronizada em condomínios

The employment of flexibility in the design of façades makes them adaptable to adverse weather conditions, resulting in both minimization of environmental discomfort and improvement of energy efficiency. The present study highlights the potential of flexible façades as a resource to reduce rigidity and form repetition, which are usually employed in condominiums of standardized houses; as such, the work presented herein contributes to field of study of architectural projects strategies for adapting and integrating buildings within the local climate context. Two façade options were designed using as reference the bionics and the kinetics, as well as their applications to architectural constructions. This resulted in two lightweight and dynamic structures, which cater to constraints of comfort through combinations of movements, which control the impact of solar radiation and of cooling in the environment. The efficacy and technical functionality of the façades were tested with comfort analysis and graphic computation software, as well as with physical models. Thus, the current research contributes to the improvement of architectural solutions aimed at using passive energy strategies in order to offer both better quality for the users and for the sustainability of the planet

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines