45 resultados para Diógenes Laercio
Resumo:
This study aims to understand the experience of people suffering from mental disorder. The patients are enrolled in a mental health ambulatory clinic in the city of Natal (RN). Mental disorders are growing rapidly in the contemporary world and are a source of intense mental suffering. Besides patients being strongly marked by a history of isolation and prejudice, they have been the target of real atrocities committed in the name of preservation of a supposed normality. The understanding and treatment of this disorder is influenced by cultural and historical inferences, depending on the period in which it is experienced. Semi-directed Interviews were conducted with a group of users, with the emphasis on giving voice to their uniqueness and individuality, highlighting how each one perceives his or her own experience. These were recorded and later transcribed by identifying the core of meanings. The results were analyzed under the gaze of the Humanist Phenomenology Existential perspective, which aims to unravel the phenomenon, without truths from volatility, highlighting the existence of the mental disorder as a way of living, being permeated by suffering mental and influenced by social problems, assuming contours very particular to each individual. Some progress has been perceived, even by users, with respect to the change of paradigm in the way of care, but still there is a consistent emphasis on medical and drug use. The changes point to the need for offering services to replace the asylum hospital model, and in addition to accept the bearer of mental disorder as a citizen, a bearer of rights who should be accepted and respected by society. Despite the pain expressed and its close liaison with suicide, their reports are full of perspectives and attitudes of confrontation facing life, pointing to new possibilities to be, recreating itself
Resumo:
Low level laser irradiation (LLLI) has been used in Dentistry to promote wound healing and tissue regeneration. The literature shows a positive effect of LLLI on cell proliferation, but little is known about their effectiveness in promoting stem cells proliferation. The aim of this study was to evaluate the effect of LLLI on the proliferative rate of human periodontal ligament stem cells. Extracts of periodontal ligament were isolated from two third molars removed by surgical and/or orthodontic indication. After enzymatic digestion, the cells were grown in α-MEM culture medium supplemented with antibiotics and 15% fetal bovine serum. On the third subculture, the cells were irradiated with a InGaAlP-diode laser, using two different energy densities (0,5J/cm 2 - 16 seconds and 1,0J/cm² - 33 seconds), with wavelength of 660nm and output power of 30mW. A new irradiation, using the same parameters, was performed 48h after the first. A control group (non irradiated) was kept under the same experimental culture conditions. The Trypan blue exclusion test and the mitochondrial activity of the cells measured by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] essay were performed to assess the cell proliferation in the intervals of 0, 24, 48 e 72 h after irradiation. The data of cell counts were submitted to nonparametrical statistical tests (Kruskal-Wallis and Mann-Whitney), considering a confidence interval of 95%. DAPI (4 -6-Diamidino-2-phenylindole) staining of the cells was performed at 72h interval to evaluate possible nuclear morphological changes induced by LLLI. The results of this study show that the energy density of 1,0 J/cm² promoted greater cell proliferation compared to the other groups (control and 0,5 J/cm²) at intervals of 48 and 72h. The mitochondrial activity measured by MTT essay showed similar results to the Trypan blue cell counting test. The group irradiated with 1,0J/cm² exhibited a significantly higher MTT activity in the intervals of 48 and 72h, when compared to the group irradiated with 0,5J/cm². No nuclear morphological change was observed in the cells from the three groups studied. It is concluded that LLLI has stimulatory effects on the proliferation of human periodontal ligament stem cells. Therefore, the use of laser irradiation in this cell type may be important to promote future advances in periodontal regeneration
Resumo:
The mangrove is a coastal ecosystem of the big ecological importance, showing high fragility front by natural process and the human interventions in the coastal zone. This research has objective to analyses the relation between mangrove species distribution and geochemical parameters variation of the water and soil in Apodi/Mossoro estuary, located in the Rio Grande do Norte state north coastline. The results were obtained from floristic and structural analysis of the vegetation and Quick Bird satellite images interpretation (collected in 2006 year), manipulated with ENVI 4.3 and ArcGIS 9.2 software s. This estuary was characterized by to presents a gradient of the salinity around 40 kilometers extension, finding amount between 50 and 90 g/l-1. Will be identified the formation of the mix vegetation formation in the estuary mount, where the water salinity no show express wide variation on seawater (36 g/l-1), finding species: Rhizophora mangle L., Laguncularia racemosa (L.) C. F. Gaertn, Avicennia schaueriana Stap. & Leechman e Avicennia germinans L. Along of the estuary, have a streak formation of the vegetation composed by Avicennia spp. and L. racemosa. In high estuary, where the salinities value stay above 60 g/l-1, only A. germinans predominate in dwarf form. In this sense, the salinity is as a limiting factor of stress on the mangrove vegetation as it enters the estuary, this parameter should be taken into account when drawing up management plans and environmental restoration in the estuary in question
Resumo:
This paper is set in a scenario in which higher education institutions suffer from external pressure to increase efficiency. The legislation after the Law of Directives and Bases for Education (LDBE), from 1996, is characterized by the fragmentation in its implementation, raising a concern with flexibility and innovation in several normative devices as well as aspects that must be incorporated to its organizational structure. The policies examined in this thesis are: Distance Education (DE); Law of Innovation and the Program of Support to Restructuring and Expansion of Federal Universities (PSREFU). This thesis aims to observe to what extent the characteristics of innovation and flexibility, which mark the new post- LDBE educational legislation, influence the organizational redesign of the Federal University of Ceará (UFC). For being about implementation policies, using contingency approach in order to collect the internal dynamics permeating the redesign of higher education institutions, the thesis focuses on the impacts caused by flexibility and innovation. This is a qualitative research, with case study methods, archive research and semi-structured interviews with members of the university administration. The results don t allow us to confirm the adoption of a more flexible and innovative configuration in the university but it is possible to identify the presence of those elements in the implementation changes, characterizing the hybrid structure. The changes mainly expose the extension of the management of projects to the administrative and academic components related to the institution. In terms of projection, the study found changes in the elements which characterize the current setting and the tendency of the university for adopting a diverse organizational structure. However, if the decentralization of management persists, the academic units may adopt their own structural solutions, but with no evidence of changes in the professional organization in most units. In this perspective, this thesis states that there are difficulties when incorporating innovation and flexibility to their organizational structure, which lead to improvised solutions, superposing skills through the redundancy of structures created with the same purpose or copying exogenous solutions
Resumo:
The indigenous political scene in Brazil is undergoing transformations that need to be better analyzed by scholars in the field of the Social Sciences. The deficit in the policy of indigenous land demarcation emerges as the largest obstacle in the conquest of collective rights. Therefore, a study to analyze renewed strategies in the struggle for social rights, and their implications in local everyday life relations, is urgent. In this context, the aim of this research is to understand the current social dynamics of identity among the Tremembé people of Almofala, in the state of Ceará, Brazil, with a fieldwork conducted in the flour mill of the Casa de Farinha Comunitária project, in the Lameirão community. Specific aims are: a) to analyze the processes involved in the project in order to comprehend their meanings and appropriations as well as their everyday life and political uses; b) understand the strategies to fight for social benefits; c) analyze the local ethnic classifications grounding the construction of the Tremembé identity in Almofala. Methods deployed are ethnography of communities, used to apprehend the social production of networks of relationships, and a social cartography of practices. The realization of rights demanded by the indigenous populations in Brazil is intertwined with a process of social and legal legitimation their identity and cultural heritage. Such legitimation works as a safeguard mechanism of rights secured by the Constitution. Therefore, to own a “cultural heritage” is perceived as a “passport” to benefit from emerging rights. Amid this context, changes in the traditional processing of the cassava root, a productive practice shared locally by diverse social groups, is reified as cultural heritage by the Tremembé people of Almofala and their network of collaborators in the pursuit of accessing distinctive public policies. Furthermore, the research came across specific social arrangements of local subjects which unfolded internal struggles, enabling to understand the dynamics of the Tremembé of Almofala identity process.
Resumo:
Kidney transplantation is the best treatment for patients who have lost kidney function. Renal transplant patients require accurate immunosuppressive drugs to prevent rejection. In this process T helper cells of the immune system perform key role in the immune response to the graft, and recently the Th17 cells has been investigated by production of IL-17 potent proinflammatory cytokine whose role in the rejection has also been described. Increased of Th17 cell expression has an important association with the development of rejection in renal microenvironment, however the likely mechanism is not well understood. This study aimed to evaluate the Th17 response from the influence of the chemotactic axis CCR6/CCL20 and genetic variants in IL-17 and IL-17RA. We conducted a case-control study involving 148 patients transplanted at the University Hospital Onofre Lopes/UFRN in which assessed by immunohistochemistry protein expression of IL-17 and chemokines CCR6/CCL20 and by PCR-RFLP genetic variants in IL17A and IL17RA. Our results showed no influence of genetic polymorphisms on the outcome of the graft or the protein expression of IL-17. In renal graft microenvironment found several sources producing IL-17: tubular epithelial cells, glomerular cells, neutrophils and cell interstitial infiltration, in turn the expression of chemotactic axis CCR6/CCL20 was restricted to the tubular epithelium cells. There was a slight positive linear correlation between the presence of IL-17 and expression of chemotactic axis CCR6/CCL20 in the microenvironment of renal graft. Therefore, we believe that, combined with our results, further studies with increased "n" sample and greater control over the variables involved in obtaining the renal specimen, can determine more clearly the influence of chemotactic axis CCR6 / CCL20 and polymorphisms in cytokines related to Th17 profile on the control of this cell subtype response in rejection processes to renal allograft.
Resumo:
The following paper attempted to investigate and discuss the possible improvements in the writing of students from the public network in the 6th grade of elementary school. This research was run in the professional master degree In Portuguese Language. Also based upon Genetic Criticism, this study attempting to analyze in which way and in which proportions the alterations done in the texts reveal and perspective capacity in the students as they replace, broad, remove or just move terms in their assignments. We tried to develop our analysis in the pragmatic perspective in which Textual Linguistic is included, investigating the texts and appreciating them as a construction process of meaning. Our theoretical discussion will be based on and socio-interactional conception of language (MARCUSCHI, 2008), as well as in the postulates of Analyze of Discursion (ADAM, 2010, 2008). It has also been used the theoretical assumptions taken from Genetic Criticism which regard the relation between text and genesis, due to the fact that it considers the text and a the result of a construction of progressive elaboration and the writing as an activity of constant movement (DE BIASI, [2000] 2010; GRÉSILLON, 1989; [1990] 2008; [1992] 2002; SALLES, 2008a). To assemble the data in this research we took into consideration the social variables related to the students and the sociocultural context. Nonetheless, this investigation point towards a real classroom situation where we tried to analyze the language functioning in application conditions, thus, giving us authority to describe more precisely the reality we lived in, which provided us with a more attentive look to the observed particularities. This description of the reality appreciated built a path that point to a research of qualitative data approach to which meanings deriving from interpretation were attributed. To conduct this research we resourced to the Action-Research process. The data are comprised of ten personal reports that were created from rewriting assignments, which constitutes a range of twenty texts assessed starting from the linguistic operations acknowledged by Generative Grammar and continued by Lebrave and Grésillon (2009). As result of this analysis, we identified the operation of adding more often than the other ones. The replacement and removal operations display a very close offspring. Nevertheless, the moving operation was scarcely used. These results, besides demonstrating linguistic creativity of the students, revealed that for a text to be seen as “concluded”, the writing student articulates new elaborations through these linguistic operators and that these movements of coming and going, of erasures and amendments contribute significantly for the teacher to approach the relationship the student keeps with his textual and discursive expression, and then, with that, to hold information that eventually provides individual and collective directions in school productions.
Resumo:
In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications
Resumo:
The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon
Resumo:
The construction industry is one of the largest consumers of natural raw materials, and concrete is considered today the most used material wide. This accentuated consumption of natural resources has generated concern with the preservation of the environment, and has motivated various studies related to the use of resid ues, which can partially or entirely substitute, with satisfactory performance, some materials such as the aggregate, and in so doing, decrease the impact on the environment caused by the produced residues. Research has been done to better understand and improve the microstructure of concrete, as well as to understand the mechanism of corrosion in reinforced steel. In this context, this work was developed aiming at discovering the influence of the substitution of natural sand by artificial sand, with rega rd to mechanical resistance, microstructure, and durability. To obtain the electrochemical parameters, an adaptation was made to the galvanostatic electrochemical method to study the corrosion in reinforced steel. Concretes of categories 20 MPa and 40 MPa were produced, containing natural sand, and concretes of the same categories were produced with artificial sand substituting the natural sand, and with the addition of sodium nitrate and sodium chloride. Due to the use of rock dust reject (artificial sand), an evaluation was made of its environmental risk. The results indicate that the concretes of category 20 MPa present a better performance than the concrete made with natural sand, thus making it a viable substitute. For the category 40 MPa, the better performance is from the concrete containing natural sand. The adaptation of the galvanostatic electrochemical technique to the study of the corrosion of reinforced steel within concrete proved to be valid for obtaining electrochemical parameters with a high degree of reliability, considering the number of degrees of freedom
Resumo:
The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.