Resposta celular Th1 /Th2 na doença periodontal experimental, em ratos: um estudo imuno-histoquímico

Host response plays a major role in the pathogenesis of periodontal disease. Mediators such as inflammatory cytokines which are secreted during the immune response to bacterial challenges have ambiguous functions that may or may not lead to protection of the attacked tissue. In this context, experimental evidence suggests that T-helper 1 (Th-1) and T-helper 2 (Th-2) mediated responses are potentially important during the disease process. The aims of this study therefore were to further clarify the role played by Th2 cells during different time points of the active phase of periodontal disease, as well as, to investigate whether there was any evidence of a Th1 response in the periodontal disease microenvironment. Experimental periodontitis was induced in 30 Wistar male rats by placing cotton ligatures around the mandibular first molars. The rats were then randomly divided into two groups. Group1 (G1=15) and Group 2 (G2=15). In G1 the ligatures were maintained for 2 days, whereas in G2 the ligatures were left for 15 days, a time point that corresponds to the advanced stage of periodontal disease The contra-lateral teeth served as controls (no ligatures). Immunohistochemical investigation for the presence in gingival tissue of Th2 specific transcription factor (GATA3) and the subunit of the IFN-γ receptor was carried out after the disease induction period. Light microscopy analysis revealed a decrease in the expression of GATA-3 as bone loss progressed. On the other hand, although IFN-γ R1 was detected at an early stage of the active phase of disease its expression remained unaltered during the remaining period of the study. These results indicate that the Th2 response have a protective role during the pathogenesis of periodontal disease and that the progression of the periodontal disease is related with the unbalance of the responses Th1/Th2

Os agentes funerários e a morte: o cuidado presente diante da vida ausente

The present time is marked by the art of escape from death, which has become synonymous with failure, its exposure has become intolerable and the care of the dead body were assigned to third parties who market this practice through services and products that shape the market undertaker. In this context, in which death is an object of study, has arisen funeral officers, as professionals dealing with a dead body, with the pain of relatives and their reactions, often being the first to have contact with the death scene. As professionals in the health area, the morticians also deal with death. The first attempt to prevent the arrival of death, funeral officers already has begun their work routine from there. Death and its surrounding part of their profession. What about those professionals whose work demands as a feared and denied by society? This study aims to understand the intents, meanings and implications for the mortician to deal with death in their daily work in order to focus renewed attention to the care of these professionals. To this end, it was carried out a qualitative research grounded in the theoretical framework of Gadamerian hermeneutics for production and interpretation of narratives. It was used two methodological strategies for data collection: in-depth interview with script and workshop with the use of "scenes". Research participants were nine morticians funeral of two funeral agencies of the city of Natal. It was possible to detect the presence of the social imaginary of interdiction on the theme of death from living with feelings of his presence daily, from the need of respondents to naturalize their contacts with death, a requirement of their office to deal with the difficulties of manipulating body fluids and odors, sometimes in a state of decomposition; allied to wishes to achieve the goal of delivering to family-customers a "embellished" body for the final farewell. Being a mortician, in addition to not being a professional motivation, involves facing difficulties related to heavy routine work, low salaries, unprofitable work materials and equipments, besides having to deal with the social gaze that devalues the profession. In turn, they also deal with the pain coming especially from contact with family members, either when they are targets of these feelings of anger, whether they identify with the pain of the bereaved ones. On the other hand, when the recognition and gratitude of the families occur, they find meaning and beauty in their profession of caring for the dead body. The present study by giving voice to morticians has become possible to understand better their profession, the pain that surrounds and care needs of these workers. Finally, it has argued that the mortician may be recognized as a care professional for the way exercising caution with the dead body and their families.

Síntese e caracterização de látices acrílicos reticulados com (1,6-diacrilato propoxilato hexanodiol) via polimerização em emulsão

Latices based on acrylic acid and ethyl methacrylate, crosslinked with 1,6‐propoxylate‐hexanodiol diacrylate were synthesized via emulsion polymerization with different monomeric compositions. The resultant latices were thickened with different NaOH/(acrylic acid) molar ratios and were characterized by titrimetry, zeta potential measurements, turbidimetry, and capillary viscometry. Intrinsic viscosity was determined for an uncrosslinked copolymer, using toluene as solvent. All the latices were coagulated with NaCl and washed with water at 60°C analyzed by FTIR spectrophotometry, in order to characterize functional groups from the copolymer and crosslinking agent.

Alquilação redutiva da quitosana a partir do glutaraldeído e 3-amino-1-pr

Chitosan derivatives were prepared by reductive alkylation using glutaraldehyde and 3-amino-1-propanol. The reducing agent used was the sodium borohydride. Tests of solubility, stability and viscosity were performed in order to evaluate these parameters effects in the reaction conditions (molar ratio of the reactants and presence of nitrogen in the reaction system). The molecular structure of commercial chitosan was determined by infrared (IR) and hydrogen nuclear magnetic resonance spectroscopy (1H NMR). The intrinsic viscosity and average molecular weight of the chitosan were determined by viscosimetry in 0.3 M acetic acid aqueous solution 0.2 M sodium acetate at 25 ºC. The derivatives of chitosan soluble in aqueous acidic medium were characterized by 1H NMR. The rheological behavior of the chitosan and of the derivative of chitosan (sample QV), which presented the largest viscosity, were studied as a function of polymer concentration, temperature and ionic strength of the medium. The results of characterization of the commercial chitosan (the degree of deacetylation obtained equal 78.45 %) used in this work confirmed a sample of low molar weight (Mv = 3.57 x 104 g/mol) and low viscosity (intrinsic viscosity = 213.56 mL/g). The chemical modification of the chitosan resulted in derivatives with thickening action. The spectra of 1H NMR of the soluble derivatives in acid aqueous medium suggested the presence of hydrophobic groups grafted into chitosan in function of the chemical modification. The solubility of the derivatives of chitosan in 0.25 M acetic acid aqueous solution decreased with increase of the molar ratio of the glutaraldehyde and 3-amino-1-propanol in relation to the chitosan. The presence of nitrogen and larger amount of reducing agent in reaction system contributed to the increase of the solubility, the stability and the viscosity of the systems. The viscosity of the polymeric suspensions in function of the shear rate increased significantly with polymer concentration, suggesting the formation of strong intermolecular associations. The chitosan presented pseudoplastic behavior with the increase in polymer concentration at a low shear rate. The derivative QV presented pseudoplastic behavior at all concentrations used and in a large range of shear rate. The viscosity of chitosan in solution decreased with an increase of the temperature and with the presence of salt. However, there was an increase of the viscosity of the chitosan solution at higher temperature (65 ºC) and ionic strength of the medium which were promoted by hydrophobic associating of the acetamide groups. The solutions of the chitosan derivatives (sample QV) were significantly more viscous than chitosan solution and showed higher thermal stability in the presence of salt as a function of the hydrophobic groups grafted into chitosan backbone

Caracterização de látices acrílicos em função da neutralização de seus grupos carboxilas

Latexes based on acrylic acid, acrylamide, ethyl methacrylate, and ethyl acrylate were synthesized via emulsion polymerization with different monomer compositions. The resultant latices were thickened with different molar ratios of NaOH to acrylic acid and were analyzed in terms of acid‐basis titrimetry, turbidimetry, rheology, and tensiometry. Titrimetry, turbidimetry, and rheometry were used to analyze factors such as carboxyl group availability and particle solubilization, tensiometry monitoring the influence of carboxyl neutralization on polymer‐surfactant interactions. For the acrylic acid content used in this work (20 wt%), the results indicated that as carboxyl groups distribution became more homogeneous, the process of latex thickening became more effective

Obtenção de diesel verde por craqueamento termocatalítico de óleo de buriti (Mauritia flexuosa L.) sobre materiais nanoestruturados do tipo LaSBA-15

In order to obtain a biofuel similar to mineral diesel, lanthanum-incorporated SBA- 15 nanostructured materials, LaSBA-15(pH), with different Si/La molar ratios (75, 50, 25), were synthesized in a two-steps hydrothermal procedure, with pH-adjusting of the synthesis gel at 6, and were used like catalytic solids in the buriti oil thermal catalytic cracking. These solids were characterized by X-ray fluorescence (XRF), powder X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG), infrared spectroscopy (FTIR), nitrogen porosimetry and ethanol dehydration, aiming to active sites identify. Taken together, the analyses indicated that the synthesis method has employed to obtain materials highly ordered mesostructures with large average pore sizes and high surface area, besides suggested that the lanthanum was incorporated in the SBA-15 both into the framework as well as within the mesopores. Catalytic dehydration of ethanol over the LaSBA-15(pH) products has shown that they have weak Lewis acid and basic functionalities, indicative of the presence of lanthanum oxide in these samples, especially on the La75SBA-15(pH) sample, which has presented the highest selectivity to ethylene. The buriti oil thermal and thermal catalytic cracking, realized from the room temperature to 450 ºC in a simple distillation system, has allowed obtaining two liquid fractions, each consisting of two phases, one aqueous and another organic, organic liquid (OL). The OL obtained from first fractions has shown high acid index, even in the thermal catalytic process. One the other hand, OL coming from second ones, called green diesel (GD), have presented low acid index, particularly that one obtained from the thermal catalytic process realized over LaSBA-15(pH) samples. The acid sites presence in these samples, associated to their large average pore sizes and high surface areas, have allowed them, especially the La75SBA-15(pH), to present deoxygenating activity in the buriti oil thermal catalytic cracking, providing an oxygenates content reduction, particularly carboxylic acids, in the GD. Furthermore, the GD comes from the second liquid fraction obtained in the buriti oil thermal catalytic cracking over this latest solid sample has shown hydrocarbons composition and physic-chemical properties similar to that mineral diesel, beyond sulfur content low

Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio

The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50

Reforma a vapor catalítica do metano: Otimização da produção e seletividade em hidrogênio por absorção in situ do CO2 produzido

Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming

Estudo integrado do potencial fitorremediador da Eichhornia crassipes em ambientes naturais e sua utilização para obtenção de extratos proteicos

This study aimed to analyze the phytoremediation potential of Eichhornia crassipes in natural environments, optimize the extraction process of crude protein from plant tissue and, obtain and characterize this process in order to determine its viability of use instead of the protein sources of animal and/or human feed. For this, it has been determined in Apodi/Mossoró river water the concentration of ammonium ions, nitrite, nitrate, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cádmium, lead, and total chromium; It was determined in plant tissue of aquatic macrophytes of Eichhornia crassipes species present in Apodi/Mossoró River the moisture content, ash, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cadmium, lead, total chromium, total nitrogen and crude protein. It was also determined the translocation factor and bioaccumulation of all the quantified elements; It was developed and optimized the extraction procedure of crude protein based on the isoelectric method and a factorial design 24 with repetition; It was extracted and characterized the extract obtained by determining the moisture content, ash, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, cadmium, total nitrogen and crude protein. And finally, it was also characterized the protein extract using Thermogravimetric Analysis (TG), Derived Thermogravimetric (DTG), Differential Scanning Calorimetry (DSC), Infrared Spectroscopy (FT-IR) and jelly-like electrophoresis of polyacrylamide (SDS -PAGE) to assess the their molecular weights/mass. Thus, from the results obtained for the translocation and bioaccumulation factors was found that the same can be used as phytoremediation agent in natural environments of all quantified elements. It was also found that the developed method of extraction and protein precipitation was satisfactory for the purpose of the work, which gave the best conditions of extraction and precipitation of proteins as: pH extraction equal to 13.0, extraction temperature equals 60 ° C, reaction time equals to 30 minutes, and pH precipitation equals to 4.0. As for the extract obtained, the total nitrogen and crude protein were quantified higher than those found in the plant, increasing the crude protein content approximately 116.88% in relation to the quantified contente in the vegetal tissue of macrophyte. The levels of nickel and cadmium were the unique that were found below the detection limit of used the equipment. The electrophoretic analysis allowed us to observe that the protein extract obtained is composed of low polypeptide chains by the molecular and phytochelatins, with 6 and 15 kDa bands. Analysis of TG, DTG, DSC and FT-IR showed similarities in protein content of the obtained extracts based on different collection points and 9 parts of the plant under study, as well as commercial soy protein and casein. Finally, based on all these findings, it was concluded that the obtained extract in this work can be used instead of the protein sources of animal feed should, before that, test its digestibility. As human supplementation, it is necessary to conduct more tests associated with the optimization process in the sense of removing undesirable components and constant monitoring of the water body and the raw material used

Interações entre a carboximetilcelulose, carbonato de cálcio e bentonita: repercussões sobre as propriedades dos fluidos de perfuração aquosos

The role of carboxymethylcellulose (CMC) in association to calcium carbonate particles (CaCO3) in most water-based drilling fluids is to reduce the fluid loss to the surrounding formation. Another essential function is to provide rheological properties capable of maintaining in suspension the cuttings during drilling operation. Therefore, it is absolutely essential to correlate the polymer chemical structure (degree of substitution, molecular weight and distribution of substituent) with the physical-chemical properties of CaCO3, in order to obtain the better result at lower cost. Another important aspect refers to the clay hydration inhibitive properties of carboxymethylcellulose (CMC) in drilling fluids systems. The clay swelling promotes an undesirable damage that reduces the formation permeability and causes serious problems during the drilling operation. In this context, this thesis consists of two main parts. The first part refers to understanding of interactions CMC-CaCO3, as well as the corresponding effects on the fluid properties. The second part is related to understanding of mechanisms by which CMC adsorption occurs onto the clay surface, where, certainly, polymer chemical structure, ionic strength, molecular weight and its solvency in the medium are responsible to affect intrinsically the clay layers stabilization. Three samples of carboximetilcellulose with different molecular weight and degree of substitution (CMC A (9 x 104 gmol DS 0.7), CMC B (2.5 x 105 gmol DS 0.7) e CMC C (2.5 x 105 gmol DS 1.2)) and three samples of calcite with different average particle diameter and particle size distribution were used. The increase of CMC degree of substitution contributed to increase of polymer charge density and therefore, reduced its stability in brine, promoting the aggregation with the increase of filtrate volume. On the other hand, the increase of molecular weight promoted an increase of rheological properties with reduction of filtrate volume. Both effects are directly associated to hydrodynamic volume of polymer molecule in the medium. The granulometry of CaCO3 particles influenced not only the rheological properties, due to adsorption of polymers, but also the filtration properties. It was observed that the lower filtrate volume was obtained by using a CaCO3 sample of a low average size particle with wide dispersion in size. With regards to inhibition of clay swelling, the CMC performance was compared to other products often used (sodium chloride (NaCl), potassium chloride (KCl) and quaternary amine-based commercial inhibitor). The low molecular weight CMC (9 x 104 g/mol) showed slightly lower swelling degree compared to the high molecular weight (2.5 x 105 g/mol) along to 180 minutes. In parallel, it can be visualized by Scanning Electron Microscopy (SEM) that the high molecular weight CMC (2.5 x 105 g/mol e DS 0.7) promoted a reduction in pores formation and size of clay compared to low molecular weight CMC (9.0 x 104 g/mol e DS 0.7), after 1000 minutes in aqueous medium. This behavior was attributed to dynamic of interactions between clay and the hydrodynamic volume of CMC along the time, which is result of strong contribution of electrostatic interactions and hydrogen bounds between carboxylate groups and hydroxyls located along the polymer backbone and ionic and polar groups of clay surface. CMC adsorbs on clay surface promoting the skin formation , which is responsible to minimize the migration of water to porous medium. With the increase of degree of substitution, it was observed an increase of pores onto clay, suggesting that the higher charge density on polymer is responsible to decrease its flexibility and adsorption onto clay surface. The joint evaluation of these results indicate that high molecular weight is responsible to better results on control of rheological, filtration and clay swelling properties, however, the contrary effect is observed with the increase of degree of substitution. On its turn, the calcite presents better results of rheological and filtration properties with the decrease of average viii particle diameter and increase of particle size distribution. According to all properties evaluated, it has been obvious the interaction of CMC with the minerals (CaCO3 and clay) in the aqueous medium

O cuidador familiar do idoso com alzheimer: percepções e sentimentos

The Brazilian Constitution maintains that care for elderly people is a responsibility shared by the state, the family and the society. The politics for the elderly corroborate this understanding and treats home as a privileged place for elderly care taking. This determines the participation of the familiar as a caregiver, but highlights the lack of strategic assistance for the needs of the relative caregiver who feels helplessly and unattended in their responsibility for elderly homecare. In recent years , despite the recently pursuit for health and life quality, there is an increasing incidence of elderly patients with dementia diseases that lead to disability, the most common among then is the Alzheimer´s disease. This disease affects seriously and irreversibly cognition, memory and independence of the elderly, making it dependent on others to perform basic activities of daily life, for all his life. The present study aims to evaluate the perceptions and feelings of family caregivers of elders with Alzheimer on the role of caregiver. This is a qualitative study conducted with family caregivers of seniors with Alzheimer´s, caregivers linked to the group of the Specialized Care Center of the Elderly´s Health, located in Natal / RN. Through semi-structured interview research sought to investigate the perceptions of family caregivers on the role of caregiver, the feelings and the changes in the caregiver´s life since they assumed this role. The data were organized into categories and units of semantic analysis and analyzed using thematic content analysis by Bardin. The reports originated three categories: the perception of the role of caregiver, feelings related to the caregving and consequences of the caregiver role. Perceptions of caregivers of elderly from the requirement of dedication to the care generates losses in personal and professional life for the familiar who assumes this responsibility. The lack of family and social support, aggravates the burden of care for the dependent elderly. Public health politics for the elderly recognize the importance and needs of family caregivers, but not enough to provide support and meet the needs and assist them in supporting their limitations. The research results show the urgent need to take measures to assist the caregivers of seniors with Alzheimer, recognizing them as an action of promotion quality of life and health of the elderly and protection the health of the caregiver

Midgard: um middleware baseado em componentes e orientado a recursos para redes de sensores sem fio

On the last years, several middleware platforms for Wireless Sensor Networks (WSN) were proposed. Most of these platforms does not consider issues of how integrate components from generic middleware architectures. Many requirements need to be considered in a middleware design for WSN and the design, in this case, it is possibility to modify the source code of the middleware without changing the external behavior of the middleware. Thus, it is desired that there is a middleware generic architecture that is able to offer an optimal configuration according to the requirements of the application. The adoption of middleware based in component model consists of a promising approach because it allows a better abstraction, low coupling, modularization and management features built-in middleware. Another problem present in current middleware consists of treatment of interoperability with external networks to sensor networks, such as Web. Most current middleware lacks the functionality to access the data provided by the WSN via the World Wide Web in order to treat these data as Web resources, and they can be accessed through protocols already adopted the World Wide Web. Thus, this work presents the Midgard, a component-based middleware specifically designed for WSNs, which adopts the architectural patterns microkernel and REST. The microkernel architectural complements the component model, since microkernel can be understood as a component that encapsulates the core system and it is responsible for initializing the core services only when needed, as well as remove them when are no more needed. Already REST defines a standardized way of communication between different applications based on standards adopted by the Web and enables him to treat WSN data as web resources, allowing them to be accessed through protocol already adopted in the World Wide Web. The main goals of Midgard are: (i) to provide easy Web access to data generated by WSN, exposing such data as Web resources, following the principles of Web of Things paradigm and (ii) to provide WSN application developer with capabilities to instantiate only specific services required by the application, thus generating a customized middleware and saving node resources. The Midgard allows use the WSN as Web resources and still provide a cohesive and weakly coupled software architecture, addressing interoperability and customization. In addition, Midgard provides two services needed for most WSN applications: (i) configuration and (ii) inspection and adaptation services. New services can be implemented by others and easily incorporated into the middleware, because of its flexible and extensible architecture. According to the assessment, the Midgard provides interoperability between the WSN and external networks, such as web, as well as between different applications within a single WSN. In addition, we assessed the memory consumption, the application image size, the size of messages exchanged in the network, and response time, overhead and scalability on Midgard. During the evaluation, the Midgard proved satisfies their goals and shown to be scalable without consuming resources prohibitively

Uma máquina de redução de grafos para serviços web

Web services are software accessible via the Internet that provide functionality to be used by applications. Today, it is natural to reuse third-party services to compose new services. This process of composition can occur in two styles, called orchestration and choreography. A choreography represents a collaboration between services which know their partners in the composition, to achieve the service s desired functionality. On the other hand, an orchestration have a central process (the orchestrator) that coordinates all application operations. Our work is placed in this latter context, by proposing an abstract model for running service orchestrations. For this purpose, a graph reduction machine will be defined for the implementation of service orchestrations specified in a variant of the PEWS composition language. Moreover, a prototype of this machine (in Java) is built as a proof of concept

A moralidade e a vida pregressa do candidato como condição autônoma de elegibilidade

The objective of this work was about fixing the free will paradigm as negative evaluation of political rights which presents a new classification dde such rights, producing species: a) conditions of eligibility autonomous (free will), b) eligibility requirements heteronomous (will third party) and c) ineligibility (court decisions / administrative). This morality and life history as a condition of eligibility unattended, making a hermeneutic analysis of art. 14, § 9 of the Constitution, considering the justification of the views of the voting Minister Carlos Ayres Brito Appeal in Ordinary No 1069/2006 of the Supreme Electoral Tribunal (where Eurico Miranda). Are fixed concepts of morality and life history from the perspective of the moral act freely and consciously. Has resulted in the identification of the moral virtues of honesty and integrity, which are voluntary acts as a reference to morality and integrity respectively. Justifies the morality and life history as a condition of eligibility unattended. who depend exclusively on the willingness of the candidate. It is noteworthy that the conditions for eligibility as a factual finding does not violate the law and does not allow punitive sanctions or setting a deadline in case of refusal to register the application. Attributed to political parties to take responsibility in their statutes moral criteria for the nomination convention in pre candidates, giving an ethical dimension. Analyzes the law under the Clean Record of morality and life history of the candidate and the possible impact on the electoral context

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B